Unusual Bug when creating pdf from image files

Hi I have a very mindboggling problem which I cant seem to get my head around.
basically I am trying to create a pdf using a large amount of image files, these images are scans of pages of a book. so I have been trying to create a pdf file from these images, and everytime i try, it all looks ok except for one page which comes up smaller in size than the rest which is a big problem and very unusual. If I change the view of acrobat so that it shows two pages at a time then this is clearly visable where one page is normal and the page next to it is like a third of the size. Ive checked the image file properties for that page and they are more or less the same as the rest, the dimensions of the image file too, but when I add it into a PDF it seems to shrink in size, any ideas as to why? any help would be much appreciated! (and I hope what I said made sense lol )
Thanks
Nav

Hi Davew000
Can you please tell the steps you are doing to create the PDF ?
Thanks,
Tanvi

Similar Messages

Unusual error when creating PDF from Excel

2 of my work computers started suffering from this 1 week ago in Excel 2003.
All create buttons and dropdown menus work, the creation process goes through progress bars and such.
At the end, an error box titled Acrobat PDFMaker displays this error;
"An error occurred while saving the file. Please check if there is sufficient space in the temporary folder."
It's Acrobat 8 and its been updated to the highest level for quite a while. No settings have been changed.
Running on Windows XP Pro. PDF creation has worked fine before this.
It still works fine on Word.
The error is not on Google or here, so I assume I'm the first to ever get it!
There's at least 40 GB free on the drives. I cleared the system temp folder for kicks, but no change.
I did a generic uninstall and reinstall on one computer, reapplied updates, but error still pops up.

Hello - this did not happen when I printed the file to the Adobe PDF printer. It correctly sized the sheet as 8.5" x 11". Thanks for the suggestion. Also, it will properly print out to the physical printer.
The main problem is when I am combining several PDFs into one document, I have some sheets sized at 8.5" x 11" and some at 17" x 22", so the document looks strange when viewing it online. I am still not sure why the Create PDF add-in creates a different sized PDF than the Print to PDF function.

Pagination changes when creating PDF from FM file

Using Structured FM 7.2p158, Adobe Acrobat Professional 8.1.3. I have updated a chapter with a graphic and want to send a specific page to a colleague. Tried to print the individual page to a file, then distill that print file to a PDF file; Distiller flushed it, whether I used the Acrobat PDF printer or my regular printer.
Next tried printing the entire chapter, which works, but the PDF pagination is changed from the original FM file. Tried setting to "Standard" and "High Quality Print" but still get the same result.
Any suggestions, please?
Thanks,
Cheryl

Cheryl Dwyer wrote:
Tried to print the individual page to a file, then distill that print file to a PDF file; Distiller flushed it, whether I used the Acrobat PDF printer or my regular printer.
Cheryl,
You should only be using the AdobePDF printer instance when working on FM files. If you changed to a different printer and created output using that to send to Distiller, then there can be a number of issues, especially if you've somehow used the printer fonts (you may have substituion enabled in the printer driver giving you different metrics). The SetPrint utility from Sundorne <http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm> will ensure that your default printer in FM is always the AdobePDF. Note: you can still manually switch in FM if you need to directly output hardcopy to your system printer.
If Distiller "flushed" your output, then there should have been a log file generated that specifies what the error was. This might help provide some solution to your original problem.
The joboptions settings in Distiller wouldn't be creating the reflows that you're seeing. It's probably one of the fonts, printer instance, graphic size (dimension/scale) that caused your problem.

Font substitution issues when creating PDF from PS file in Distiller

I am not sure if this post should go under Distiller Server, but it dont know if there is a difference between Distiller X and Distiller Server.
Context: I am trying to convert postscript files on my PC that originate from a unique Mac built program and unfortunately receive the following error message:
%%[ Warning: Helvetica not found, using Font Substitution. Font cannot be embedded. ]%%
%%[ Warning: Helvetica-Bold not found, using Font Substitution. Font cannot be embedded. ]%%
%%[ Warning: Helvetica-BoldOblique not found, using Font Substitution. Font cannot be embedded. ]%%
When I try and convert the postscript font to a pdf in Acrobat Distiller X the font substitutes to Arial. I have a few versions of Helvetica on my PC but Distiller doesn’t recognise them.
My question is: how can I tell Distiller, as a default, to substitute to the Helvetica loaded on my PC rather than Arial so that I eliminate the error message and get an accurate pdf.
Any help would be greatly appreciated.
Thanks.

You can set the folders in distiller by going to Settings. See these two pictures (click on them)
hope this helps.

When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks

When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
Any help with getting the TOC heading entries as hyperlinks?

Try to do it from Word using the ribbon.

How to not include the path when creating pdf from many html files?

I use "Merge File into a Single File" to create a pdf file from many html files. However, the generated pdf file have the path information of the html files. I'm wondering how to generate a pdf without the path information.

Go to CREATE > Create PDF from Web Page > Click the SETTINGS button on the dialog that follows > Uncheck "Place headers and footers on new page".
Thanks!

Acrobat 9 Quits When Create PDF from Scanner Selected

Hi. I wonder if anyone can advise please.
I have recently installed Acrobat 9 on my MacBook Pro and have plenty of RAM. However, I can "Create PDF from Scanner" just the once. After that, Acrobat quits when I select Scan or quits if I cancel the scan.
I have tried the following:
1. Troubleshoot System Errors & Freezes
2. New User account
3. Recreated Preferences
4. Booted from separate disk
5. Repaired disk permissions
6. Have no third party plug-ins installed
7. Have run Repair Acrobat
8. Changed Universal Access
9. Defragmented disk & repaired files
10. Safe Boot and reinstall Acrobat
Nothing has worked except when I clean install I can scan through Acrobat once.
I can scan from the scanner software - Lexmark 4850 - with a jpeg straight to Acrobat but want to try to solve the issue of scanning straight from the app.
Thanks for your help people.
Regards
Paul

After I discovered my problem of quitting after completing the scan of the first side of a 2-sided document and decided to go to Adobe for help, I should have known I was in real trouble after following their instructions for locating the Acrobat serial number. After bringing up the splash screen and clicking on it, instead of seeing the number the splash screen disappeared! So I had no option but to use the phone. Then their help person couldn't give me the serial number- he had to transfer me- and I chose to stay with him for help instead. He decided it was a conflict between the Acrobat & HP software and ended the help session.
I then did some on-line research and discovered others with the same problem, and came up with the comparison test with the Windows version. Adobe's phone system didn't recognize my Case #, but the second Help person said it worked fine. At that point, I got the feeling that I was in real trouble. After another hour going over the same ground and repeated denials that their software was at fault, the Helper refused my request that they do a Windows comparison test or send me a Windows version to test myself and promised to call me back with results of their "research". That call never came.
On the third call, again with the Case # unrecognized by the phone system, the Helper was even more unhelpful, probably after reading the record of the first two calls. He insisted on going back to the machine and over the same ground once again, and I ended the call.
I agree that the on line approach is better, and I may have to make a double call to get the serial number (neither of the two I have, each different on the case or on the CD worked) and try that if my request for a supervisor fails. Fortunately they are so incompetent that they can't track starting over.
I'm not a programmer, but have lots of varying experience with computers dating back to the first Atari-400. Since your Acrobat uses only the Twain driver component from your scanner software, the first place to look for a problem is in the Acrobat software, especially since the software doesn't run again after the first use without reinstalling, and the scanner continues to perform properly using it's installed software. The Windows comparison test such as Tim Whitfield was able to make, would clearly establish the Mac version of the Acrobat software to be at fault, but would still not resolve our problems. Unfortunately I hold out little hope for either you or I with Adobe, since neither their phone nor the online help has come up with a prior fix. This indicates a bug fix requirement, which for something like this looks to be a relatively long time in coming.

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

Creating PDF from multiple files results in file name AND chapter name both appearing in TOC.

And all the bookmarks in that chapter nest directly under the file name. I would rather have just the chapter title appear with no file name in the TOC and the chapter bookmarks nested under that.

Hi tekwrite1955,
This is an expected behavior. When you create a pdf from any file it will list the filename in the TOC.
You have to manually edit the bookmarks.
Regards,
Rave

Create PDF from Multiple Files Error

Running Acrobat 8.1.2 and InDesign CS3 8.0.2
When trying to create a PDF from multiple files, I am getting an error with each file as it is opened by Acrobat to create the PDF file. The error reads:
Invalid value for parameter 'using' of event 'exportFile'. Expected PDFExportPreset, but received "Standard".
The files are also left open in InDesign afterward instead of being closed. Does anyone have any idea what might be causing this?
Thanks.

Did you upgrade your Office / Word installation?
PDFMaker-compatible applications for Acrobat 7 with regards to MS Office:
--| Office 2000
--| Office XP
--| Office 2003
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Problem creating pdf from multiple files

Hello,
I'm running Windows XP SP3 with Adobe Acrobat Standard 8.2.1. When I try to create a one pdf from multiple files in Adobe Standard 8.2.1 the application just closes. The two files I'm trying to combine into 1 pdf file are word files. I'm able to create a single pdf of each word file by opening them separately in word and sending them to the acrobat printer. I've tried combining other files also, but had no luck. Windows events doesn't log anything under applications and no error message pops up when the application closes.
Anybody have any ideas how to troubleshoot this issue or what could be causing the applicaton to just close?

I've read many discussions about Acrobat and problems with server files, with the general solution being what you are doing... copy the files to a local hard drive

Creating PDF from Office files in Acrobat X for Mac

Dear All - I just installed the Mac version of Acrobat X (with the newest dot release upgrade). I was surprised to find (on my installation anyway) that the only way to create a PDF from an Office document is from within Mac Office, using the print command to create an Adobe PDF.
There is no way to use Create PDF from the initial screen or the menu bar of Mac Acrobat X to convert an existing .doc, .docx, .xls, .ppt, etc. file - the dropdown list of supported formats doesn't include any of the Office formats. Nor does dragging an Office file's icon onto Acrobat's icon work.
I know from the video tutorials on adobe.com that the Windows version of the Acrobat X product does support direct conversion of Office files without having to open them first in Office. Is there something screwy with my particular installation, or is the exclusion of Office conversion in the Acrobat application (as opposed to through Office) a "feature" of the Mac version for some reason?
Many thanks.
Bob

That's a good question, but I don't have a definitive answer. I know that Adobe has claimed to be working on providing PDFMaker capabilities (at least partially) for the Mac, but we haven't seen anything yet. PDFMaker was dropped as of version 9, but even before then, it was considerably less capable than the Windows version.
I believe there are techincal limitations on the Mac that prevent them from integrating it with Microsoft Office products. I know that on WIndows, Office needs to be installed for PDFMaker to work, so Acrobat (PDFMaker) relies in part on MS Office functionality. If the same APIs aren't available on the Mac, there's not a lot they can do apart from implementing a conversion process that does not rely on MS Office, which sounds to me like a considerable undertaking.

Acrobat 8.1 Crashing when creating PDF from webpage

www.sec.gov/Archives/edgar/data/910569/000091056909000016/form6-k15june09.htm
I have been trying to create a PDF from the above URL using Acrobat 8.1 using the "Create PDF from Web Page" function. The Download Status form opens and shows the progress as files are downloaded and converted. However Acrobat 8.1 always crashes before completing the task. Acrobat 5.0 successfully completes the task although the formatting leaves a lot to be desired but that's another issue.
I've tried various values for settings such as processing 1 level or getting entire site but the crash is consistent.
I have also tried a couple of other machines in the office with the same crashed result.
Can anybody suggest why Acrobat 8.1 would fail to render this URL into a PDF and what would cause it to crash so consistently? Is there an alternate method of creating a PDF from this URL aside from loading it into Word and printing to a PDF?
Any clues appreciated!

The problem is likely that the web page does not conform to standard HTML. AA8 crashed on me also. You can print the file from your browser. The only thing that would be missing would be the 3 links near the bottom and they are easy to add.

How to create PDF from text file with specific layout?

I wanted to create the pdf from text file in specific layout - Landscape orientation and JIS B3 Page size while at Adobe Acrobat Pro.
In past, I could do a right click on a text file (desktop area) and select print to print out the document into .pdf BUT only if I set the Adobe PDF to Landscape and JIS B3 Page size BEFORE. And I could only do 15 text documents at once.
I wanted to see if I could do the create the pdf from text file with specific layout in Adobe Acrobat without having to go to Control Panel to preset the Adobe PDF to specific layout at every time. I would have to set Adobe PDF back to normal layout after I'm done with these pdf print outs. I do lots of pdfs in normal layout. Sometimes I would forget to do that.
So, How do I do that?

No such luck. It would output the contents in letter size even in JIS B3 Page layout at MS word.
Is there a script or action where I could set the orientation and page size before creating PDF on these text files?

TOC not updating when creating PDF from Robo9

I have not really created PDFs from Robo before, so I might be missing something basic. I am trying to create Word and PDF documents from my Robo9 project. My problem is that some of my topics are not being generated, in either the Word output or the PDF output. The topics are indeed part of the TOC in the Robo project, but they are not part of the TOC in the Word and PDF output. The strange thing is, all of the TOC books make the conversion, but the one book I am having the issue with includes one topic, but all of the other topics in that book do not get converted. I tried recreating the TOC, and it still does the same thing. It's almost like the printed documentation generation is ignoring any new changes to the TOC, as it's the same every time no matter what I change. I tried making some changes to topics that are generated, and I can indeed see the changes in the printed output docs.
Anything glaring I am missing, or should try? Thanks.
Mark

Likely a common misunderstanding.
The first time you create printed documentation, the topics are based on the TOC. Thereafter there is no link.
When you add new topics to the project, they are not automatically in any of the TOCs. You have to add them to each TOC. It's the same with print, you have to add them in the print layout.
Easiest way is to simply use the double left chevrons to remove the topics in the print layout and then use the double right chevron to back in, the difference being it will add all the topics in the TOC and as you added the new topics there, they will be in the print layout.
There's more in Printed Documentation on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Unusual Bug when creating pdf from image files

Similar Messages

Maybe you are looking for