Unzip file using operating system command in file/ftp receiver adapter

Hi,
I'm wonderdering how to unzip a zip-file in the receiver file/ftp adapter. I know it is possible to do it using the 'Operating system command' feature, but somehow the command I use seems to be ignored! (I'm using SP14, unix).
The command I entered is quite simple: unzip %F (also tried the %f, but i guess it doesn't really matter wich on I use).
Is it possible that I'm unzipping to another directory than the one i expect? the unzip should be performed to/in the current directory, and assumingly current directory is the one stated in the 'Target Directory', right?
Hope someone can clearify this issue for me.
Best regards,
Daniel

Hi Daniel,
It seems to me also, that the files are being unzipped to a different location than what you are expecting. The OS command might getting executed in some default location(i am trying to fnd that out)on the server and not in the target directory of the channel(It seems logical to me)....
If you have time...pls try this out & see whether this would help...
Have a shell script written with the following commands in them
cd <path to target directory>
unzip $1(filename from the channel)
and in the OS command in the Channel give....
<absolute path to the .sh file> %F
Thanks,
Renjith.

Similar Messages

Using operating system command on file receiver comm.channel

Hi,
I pepared a XI 3.0 message generating .txt file.
I must append content of this file to the and of the file with same name but different extension(.bak extension).
I know it is achieved with copy name.bak+name.txt it appends txt file to the .bak file.
My problem is: How can i supply name of .txt file to use as name of .bak file?
How can i do that?
Thanks.

/usr/sap/SID......./../../../Server0
Put the java program there.
Regards
Ravi Raman

Operating system command in file adaptor

Hi,
I am doing file to Idoc scenario, can i use the Operating system command in file adaptor to compress the file at FTP server and decompress the file at IE. I dont know is it possible and if yes then how or is there any other way to handle the big files as the network speed is very low.
Any clues!!!!!!!!!!!
Thanks in advance
Regards
Swatantra

Have a look into these threads - they seem to have the solution u need (i havnt tried it though)
Unzip file using operating system command in file/ftp receiver adapter
How to zip and unzip xml files dynamically by XI

Is it possible to call operating system command after file receive?

Hi expert,
I'm trying to call operating system command after file receive comm.channel receive a txt file.
operating system command uses txt file name as parameter.
Is it possible? How?
Thanks.

Hi,
It should be possible, actually we have two options that are
1.RUN OS command before message processing
2.RUN OS command after message processing.
So you can give the commands in the RUN OS command after message processing.
Check this links for more info
http://wiki.sdn.sap.com/wiki/display/XI/SAP%20XI%20File%20Adapter%20OS%20Command%20Line%20Feature
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/556cb799c93677e10000000a114a6b/content.htm
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID1690747750DB11724434094963199241End?blog=/pub/wlg/10392
Regards
Ramesh

How to use Operating System Commands while using define in sqlplus

How to use Operating System Commands while using define in sqlplus . The Host OS is Linux
define report_name=PROD_${host date "+%b"}.html
The above is not working.
The output should be
define report_name=PROD_JAN.html
Regards,
DB

of course I was talking nonsense: the problem here is the mixing of bind variables and DEFINE variables.
With the following changes the script should work (the conditions for begin_interval_time are perhaps not what you want):
variable snap1 number
variable snap2 number
variable rptname varchar2(20)
begin
SELECT min(snap_id) into :snap1 FROM dba_hist_snapshot WHERE CAST(begin_interval_time AS DATE) >= SYSDATE-1;
SELECT max(snap_id) into :snap2 FROM dba_hist_snapshot WHERE CAST(begin_interval_time AS DATE) >= SYSDATE-1;
end;
col file_name_value new_value report_name noprint
select 'PROD_'|| to_char(sysdate,'MON') || '_' || to_char(sysdate,'DD') file_name_value from dual;
define report_type = 'html'
define num_days=2
define begin_snap=:snap1
define end_snap=:snap2
@@?/rdbms/admin/awrrpt.sql

Operating system command in file receiver adapter

Hi,
How to use the Run Operating system command after message processing option in the parameters tab of the file receiver adapter.
I am working on a scenario wherein a batch file needs to be invoked after the file is written on the file system.
So how do i invoke this batch file from the file reciever adapter ( Run Operating system command after message processing ).

Hi,
did you see this page?
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/556cb799c93677e10000000a114a6b/content.htm
it shows all you need to know
Regards,
Michal KRawczyk

Operating System Command After File Processing in Sender File Adapter

Hello guys,
actually we have different interfaces, and the client to take all the files from only one directory, for example D:/DPI.
Unitl now we had one adapter for every file with the content conversion, so we didn't have problems with that. Now we have the problem that we sould maintain an order processing files.
We thougth that an idea could be to execute one file pointing to D:/DPI and at the Operating System Command put like: copy D:/DPI/file.txt D:/DPI/outbound/file.txt, so when file is executed, we move the next file to another directory where is pointing the adapter. Doing this we have an error on the adapter giving us the message: Could not process due to error: java.lang.NullPointerException
We are using a Windows.
There is anyway to do in our way, or there is a better solution to resolve this problem?
Any other idea to do this?
Many thanks in advance.
Regards,
Xavi.

Helo Guys,
maybe I haven't explained well.
We have one directory with different files. We have one adapter for every file( we need for the content conversion ) using NFS and all the adapters are pointing to the same directory.
The problem is that if we have files A.txt, B.txt and C.txt we need to process in an order.
And the problem we see is that for every file we have one adapter, so for example if we process file A.txt with one adapter, when this part is finished, we want to process file B.txt with another adapter, and the same for the rest of the files.
So the idea we had is to create another directories, and when A.txt has finished move file B.txt to another directory.
However this way is not running, if we log on the PI machine and execute cmd, we can do a copy of one file from one directory to another, but when we put this sentence in the adapter in OS command if we see the adapter log we see an error executing the OS command, but we don't know what is the error, there is no more information.
There is any way to do this or maybe we have to manage in a different way?
Many thanks in advance.
Regards,
Xavi.

Execute external operating system command

Hi Friends,
I have a requirement to run a script file with extention '.PL' on the application server using ABAP.
i have sample how to run it in XI.
XI3.0 provides a very simple way of handling this using the "Operating System Command" in the File Adapter.
I post my output file in the following folder,
/usr/sap/sapout/test/
The shell script is available in the following path,
/usr/sap/bin/convert.pl
The figure below explains as to how we call the shell script using "Operating System Command".
File Acess parameters
      Target Directory      = /usr/sap/sapout/test/
      File Name Scheme = TestOutput.txt
Processing Parameters
     File Construction Mode          = Add Time Stamp
     File Type                              = Binary
     Operating System Command = /usr/sap/bin/convert.pl %F
I have to do the same thing in ABAP as it has been done for XI as mentioned in the above example.
My operating system is UNIX.
If any one can give me a sample it would be really helpful to me.
Thanks in advance,
Arundhathi.

Hi Arundhati,
You can run operating system commands from ABAP.
e.g. If you want to change UNIX right for any file, you can use following code.
lv_ucomm = 'chmod a+rwx 123.txt'.
CALL 'SYSTEM' ID 'COMMAND' FIELD lv_ucomm.
whatever command you provide in Field parameter ( lv_ucomm in the above case ), ABAP run that command at operating system level.
In your case, you can provide command in lv_ucomm to run script at operating system level.
Hope it will help you.
Regards,
Naren

Run operating system command for sender File adpter (NFS)

Hi All,
iam doing a file to RFC scenario, using 'Run operating system command' in sender file adapter to change the file name while archiving (after processing completed).
I mention OS command like this:
sample_server\scripts\Test\Rename.bat"
Rename.bat file calls a 'perl script' code.
when i run interface, could see below statement in adapter log ->
"Execute OS command "
sample_server\scripts\Test\Rename.bat"
but the script was not run and file name was not changed.
Please advice what could be the problem?
Does this mean script executed successfully?
Do i need install perl software on XI server, even perl script (.bat file) is executing on sample_server?
Thanks in advance..
Regards,
Rajesh

Hi,
Just check the following URL and give it a try again :-
Executing Unix shell script using Operating System Command in XI
Hope this info Helps..
Regards,
Aditya

Operating system command to zip the file

Hi Experts,
I got proxy to file scenario, i can place the text file successfully in reciever side, i want to zip the file in reciever side using operating system command option in reciever Communication Channel.
Can anyone please give me the operating system command to create the zip file in reciever side.
Kind Regards,
Praveen.

Hi Praveen,
>>Can anyone please give me the operating system command to create the zip file in reciever side.
Why OS commands and not the PayloadZipModule?
If you need OS commands check this blog of Michal /people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
Update
You can try this command too
cmd /C "jar cMf \\<folderpath>test1.zip \\<folderpath>*.*"
Regards
Suraj

File Adaptor....... system command after file processing

i am creating 2 files with file adaptors..
lest say a1.txt and a2.txt..
in the file adaptor i am specifying the path of a batch file which is located at the same location where these 2 files are created......this batch file should run after message processing
i am using this .bat file to create a file by combining these 2 files and delete these 2 files after that...
but nothing seems to be happening..after the 2 files are created.
seems like the command is not getting triggered which it is suppose to after message processing.
please help

Hi Tarun,
Check this blog, Might give u some idea as well...
<a href="/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions: Command line sample functions</a> By Michal Krawczyk
<a href="/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi Command - Executing Unix SHELL scripting</a> By Sameer Shadab
Regards
San
Where there is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way.

How to execute operation system commands by using TSQL without enabling xp_cmdshell.

Hi Experts
Looking for advise if one can use operation system commands using TSQL without enabling xp_cmdshell.
actually using xp_cmdshell requires sysadmin privs which I am unable to provide (directly or using proc) to a user but the user needs some operating system commands to execute for file manipulation from sql server session. Please share your thought.
Best Regards
khalil

>but the user needs some operating system commands to execute for file manipulation from sql server session
See article here
http://www.mssqltips.com/sqlservertip/2014/replace-xpcmdshell-command-line-use-with-sql-server-agent/:
"Problem
I need to run something from the command-line, but based on best practices xp_cmdshell has been disabled. The task that needs to run is an internal process that will originate from within SQL Server. Is there a way to do this without using xp_cmdshell?
Solution
The use of xp_cmdshell is generally frowned upon and is now recommended to be disabled, unless it is absolutely necessary. There is a solution that works around this restriction via the use of SQL Server Agent.
Wherever SQL Server is installed, SQL Server Agent is installed with it (except for SQL Express). SQL Server Agent has the ability to run job steps which invoke the command shell. And in the case that the job is owned by a member of the sysadmin fixed server
role, the job will execute as the service account under which the SQL Server Agent is running. "
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Operating System commands in FTP adapter

Hi
I have a requirement to use "Operating System Command" option in the Sender/Receiver side File Adapter.
And in help.sap.com they have brief notes on this.
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
When I tried to execute some valid DOS commands like MKDIR,RENAME etc it didn't work at all.
But process has been sucessfully completed without any error!!!
System : XI 3.0 SP 11
Can anyone has any inputs on this ? Pls share me some ideas with example. Is there is any limitations on this feature?
Note: When I tried to give invalid commands hfjkhfkasdjfh,asdjdhas etc, still it is not giving any error!!. Still my File Adapter as well as entire process is successfully completed.

Hi,
A couple of cautionary notes.
The OS command is executed after the file has been processed, e.g. read successfully by a sender adapter or created successfully by a receiver adapter.
The file name processed can be accessed using %f in the OS command.
The OS command must include the full directory path, or XI will assume the current directory which may not be where your command resides.
Regards,
Bill

Run Operating Systems command.

Hi Experts,
Please provide information on Run Operating Systems commands for File adapter.
I have gone through t he below mentioned link already:
[http://help.sap.com/saphelp_nw04s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm]
Also , please provide links for OS commands whch can be used for windows OS.
thanks,
Neha

Hi Neha,
pls do chk this linkfor windows OS commands
http://webtools.live2support.com/windows/
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapXIFileAdapterOSCommandLine+Feature
An interesting usage of Variable Substitution in XI
Solution to the problem encountered using Variable Substitution with XI-SP12
Copy a file with same filename using XI
thanx
Sampath
Edited by: venkata sampath on Jul 8, 2008 7:20 AM

Run Operating System Commands

Hi,
There is an urgent requirement, i want to know about Run Operating System Commands in file adapter. What are all possible commands for windows operating system? and how it works? Kindly send me your suggestions and links at the earliest.
Your help will be appreciated.
Thanks,
Sadhna.

Hi,
Run Operating System Command Before/After Message Processing
●      Command Line
An operating system command specified here is executed before or after the message processing of a file that was found in a run. The default value is an empty character string (no command).
When the operating system command is called, the file name currently being processed can be specified with the following placeholders:
●        %f (file name)
●        %F(absolute file name including path)
●      Timeout (secs)
This specifies the maximum runtime of the executing program in seconds. When this time interval is exceeded, the adapter continues processing. The executing program continues to run in the background.
●      Terminate Program After Timeout
Set this indicator if the adapter is to terminate the executing program when the timeout is exceeded.
The adapter writes the output (STDOUT and STDERR) for the operating system command in the system trace.
Regards,
Phani

Unzip file using operating system command in file/ftp receiver adapter

Similar Messages

Maybe you are looking for