Up gradeing from a gen 3 40 gig to a 80 gig video

i currently have a gen 3 40 gig ipod and bought a new 80 gig video ipod can i just plug the new i pod in and wiil it down load all my songs?
hp   Windows XP  

Make sure you update your Windows XP , with the latest updates.
IPOD Firmware = Ver 1.2.1
Use ITunes Version 7.0 or 7.0.216 the latest!!
Go to the IPOD setup/Summary /Music etc. and configure the settings that best suit your preference! Manual or Sync operation!
Hope this helps!!
Compaq PC / 1GB Ipod Nano & 80GB Video   Windows XP   Pent 2.53 GHZ 512MHZ MB RAM 120GB HD

Similar Messages

  • Have 2 IPods Want Transfer from First Gen to MacBook Pro but using 4th Gen

    Have old 1st gen Ipod with music on it. I have a 4th Gen Ipod that I use with MacBook Pro. Wont let me transfer music from 1st gen to new computer. Old computer sold to buy new one. Any ideas??

    Try Senuti.
    It's a program that transfers music from iPod to iTunes on a Mac.
    There's also a similar program called Yamipod which has a Mac version.
    I've used both these on a Mac with great success.

  • My hard drive suddenly went from 52 gigs free to 22 gigs- is there any way to figure out what happened?

    my hard drive suddenly went from 52 gigs free to 22 gigs- is there any way to figure out what happened?

    Perhaps this may be of help...
    Where did my Disk Space go?

  • What is the benefit of up grading from ATI Radeon 1900 to ATI Radeon 4870?

    What is the benefit of up grading from ATI Radeon 1900 to ATI Radeon 4870?. Will the average user that does not use video game see the difference? What programs would I see the benefit in?
    Thanks!

    Installing 3 NVIDIA GeForce GT 120 will allow you to use up to six monitors. Installing the Radeon 4870 will give you some benefits in certain video/graphic editing programs. If all you do is email, web surfing and non-graphic intensive stuff than the NVIDIA GeForce GT 120 is adequate.

  • I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

    I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

    artisttouch,
    If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
    To solve it, you may try the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save curent artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • How do I upgrade to 4 gen from 1 gen

    How do I upgrade to 4 gen from 1 gen?

    - Purchase a 4G iPOd
    - Make one final sync of the old iPod. The sync includes a backup
    - Connect the 4G iPod to that cmputer and restore the 4G iPod from the backup of the old iPod. Make sure all the apps and music that are on the old iod are on the computer since apps themselves (data is) and music is not in the backup.

  • Might be a dumb question, but I am moving from 1st gen to iPadair; on Safari, 1st gen to delete apps/sites just visited, you could double tap home key and apps would appear on bottom and one could delete from there. How does it work on ipadair?

    This may be a dumb question, but nonetheless, here goes:
    I just moved from 1st gen ipad to new ipad-air. Great and happy! But, one thing I can't figure out how to do is to delete the pages/sites/apps that I have just used? For example, on the 1st gen. you could double-tap home button and past actions would come up on bottom of screen. I could then delete them one by one, to keep things cleaned up. Am I missing something here? Does it keep a log irregardless? Not the same as deleting history - at least didnt' work for me.

    Close apps and not delete apps.
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen

  • 5th Gen iPod Classic won't play video

    I've been having a problem getting my 5th gen. iPod to play video podcasts. I'm using iTunes 9.2.1 and os 10.6.4. For about a month or so now my iPod will play a couple videos and then it just stops playing them. It usually finishes playing but then goes to black screen before the next video starts. If I click the pause button the battery indicator shows up at the top and three podcast titles quickly display and then disappear, and then the screen returns to the menu. From that point it won't play any video podcasts; until I resync the iPod then it will play three of four video and quit again until it's resync'd. Even after it stops playing videos it will still play audio podcasts without interruption.
    I've tried restoring my iPod, but I get the same behavior after the restore.

    I have an 80 classic and i started getting new movies and tv shows and my ipod stoped playing movie files. The time i experienced this was May 22, 2009. I loaded the free episode of the Glee Club offered by itunes. Did you ever find out how to fix that. Someone PLEASE HELP!!!!!!!!!

  • 2nd Gen Apple TV stream audio no video of iTunes rentals since updates

    Please advise. I've seen so many threads from numerous people having similar issues, but the few knowlegable individuals that have offered advise to others, has not helped in my situation.
    Everything I have is up to date to the latest software: computers, apple tv, remotes, iPad, etc. Home sharing is on. I have reset the apple tv numerous times. I have unplugged the high quality HDMI plug from both ends. The plug itself is fine.
    Do note, this worked fine before the 2nd to last update. I constantly stream music, videos, anything from my ipad to apple tv w/no issues ever. Once the update to the 3rd gen ipad activated, done, gone was video. Audio only.
    I currently have a rental that will expire in a few hours that of'course I didn't watch last night since I couldn't use the apple tv.
    Please advise.
    If the advise involves detail, step by step is always appreciated. Thank you in advance.

    It looks to be an issue with the video app. For now best to rent directly or you can mirror if it's iPad 2 (or later)

  • I have downloaded a movie from ITunes.  It shows up in my video app.  When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

    I have downloaded a movie from ITunes.  It shows up in my video app.  When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded".  Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

    Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • I have Mac pro and firefox 3.0.19.I am trying to download a video from youtube.? I can see the video. I want to download it and save in my computer to see it again. I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me t

    I have mac pro and firefox 3.0.19
    I am trying to download a video from youtube.?
    I can see the video. I want to download it and save in my computer to see it again.
    I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
    When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
    == This happened ==
    Every time Firefox opened
    == I want to download a video from youtube

    No, this reply is not helpful. It simply generates this little gem:
    "This service requires the conversion feature to be enabled.
    Configure conversion ?"
    And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

  • How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!

    How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!

    Im just guessing but it seems like you would have to get your movie into the correct folder on a computer then use iTunes to sync it to your iPad. If you've synced to a computer and have movies then on your computer should be a folder with the movie in it. You could export your iMovie to something like Dropbox then download from Dropbox to the folder you think it needs to be in the sync your iPad again. Again this is just a guess. Others may have a better answer.

  • Anyone know which render format I should use, my film will be used on a video wall (12 screens) and I need super quality. My footage format is 1080p HD resolution 1920x1080. I will be running the project from a mac with a direct line to video wall. Thanks

    Anyone know which render format I should use, my film will be used on a video wall (12 screens) and I need super quality. My footage format is 1080p HD resolution 1920x1080. I will be running the project from a mac with a direct line to video wall. Thanks in advance.

    I do some VJ-type work, involving playback of QuickTime files from the computer to projections, and I get good results using ProRes 422. That's convenient, because ProRes 422 is such a great editing codec, too.
    Traditionally, VJs use PhotoJPEG codec, which also works well, but it's a bad editing codec. So you would have to export an edited master, then convert.
    If you want it to look as good as possible, definitely schedule some time to test the footage on the wall. You may want to change the color correction of your footage to match the projectors. And if you feed the video wall some flat gray, you can see if any of the projectors need to be  adjusted.
    I'm not sure what application you're using for playback, but QuickTime Player 7 works well. It has an option to play fullscreen on an external monitor (View > Present Movie…).

  • How do I get the music back on my iPhone after manually deleting it from the device (to get space for photos/videos)?

    How do I get the music back on my iPhone after manually deleting it from the device (to get space for photos/videos)?  I can sync with iTunes but it doesn't copy these songs back, even though they still appear in my iTunes library.  I can click on the Music link  under 'On My Device' in iTunes and the missing songs all appear to still be on the device, but they are not.  I normally delete using iTunes and do not have this issue.  This time I was out and needed more space to shoot photos and videos so I removed a lot of music from my phone through the Music App.

    The songs I'm trying to reload on my phone are on my PC.  These we had loaded into iTunes.  I can remove them all from the library and then add them all back one by one I imagine.  The problem I'm having is that I removed them manually from the phone, they still appear in iTunes music library yet they won't sync.  I don't want to take the time to compare the phone to my library, remove from the library what's missing on the phone and then add them all back again.  64GB (mostly music) will take a while.

Maybe you are looking for

  • Time Capsule can't be found!

    I successfully connected my time capsule to my existing network. I managed to even backup my system. Onthe second backup run, it failed. An error message stated that the time capsule was disconnected. It was plugged into the wall and a solid green li

  • Urgent: Ultiboard consistently crashes on DRC check

    On my design that is several months in the working I've reached a point where I don't get DRC errors anymore (even though I know there are several) and if I press the DRC check button manually ultiboard crashes. I've tested this on three of my cowork

  • Multiple applications not showing up in "Application Support" folder. Help?

    In my "Library" folder there is an "Application Support" folder. And I had alot of applications in there. All of the information and things of ALL my applications was saved in there. After I updated to OSX Lion there are only a FEW applications liste

  • Corporate Account/Group Key field in SD Reports?

    Hi, We would like to start populating the Corporate Account field on the General Data > Internal Control tab of the customer master.  This field is available in FI reporting (FBL5N  - as Group Key) but does anyone know if it is available in SD report

  • Move Elements 9 to new computer?

    hi everyone, I got a new computer and want to move my Elements 9 to this computer, but I can't figure out how.  I would imagine I need to downlaod Elements 9 on the new computer using my old serial number? but I can't find Elements 9 to download, onl