Update 10.6.8 server to lion

What are the steps I need to follow to update my 10.6.8 server to lion server? My xservers are old and will only go to lion.

In order to install Mac OS X 10.7 you will need:
Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of RAM
Mac OS X 10.6.6 or later with the Mac App Store installed
At least 4GB of additional disk space to accommodate the download, but more is obviously recommended

Similar Messages

  • HT1338 Do you update Mac OS X Server 10.7.4 on the mini cube server  to the OS X Mountain Lion

    Please advise me, if you have the answer.
    Do you update Mac OS X Server 10.7.4 on the mini cube server to the OS X Mountain Lion.
    Thank You, in advance for your help. 

    Simply go into the App store and download Mountain Lion. Lion server is upgraded by the Mountain Lion install and after that you can install OS X Server.

  • I have just update my mac mini server to OX Yosemite, but now the iTunes is not working at all.

    I have just updated my Mac Mini Server (Mid 2011) to OS Yosemite ver 10.10, after the update, iTunes is not working, and i have tried to reinstall iTunes over and over again but it was not successful , please advise if you have a solution or share similar problems. Thank you.

    You have to upgrade to 10.6.8 to be able to download iTunes 10.7 or 11.  The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
    The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
    The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
    The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.

  • Clients Not Updating After Migration from Server 10.7 to 10.8 (update to cashing server)

    My school has been providing updates using Update Server on Lion.  With the update to Mountain Lion Server we switched to Cashing Server for updates and I removed the WG Manager (please no lecutres on WGM, I am transitioning) setting that pointed to the Update Server.  Some of my clients are not updating now.  My guess is that they are still looking to my update server. 
    Is this an accurate diagnosis and how can I clear out this pointer?

    My school has been providing updates using Update Server on Lion.  With the update to Mountain Lion Server we switched to Cashing Server for updates and I removed the WG Manager (please no lecutres on WGM, I am transitioning) setting that pointed to the Update Server.  Some of my clients are not updating now.  My guess is that they are still looking to my update server. 
    Is this an accurate diagnosis and how can I clear out this pointer?

  • How do I avoid having to re-download all the software updates for SUS after migrating to lion, I have all the snow leopard/Lion updates saved to disk already

    I have recently upgraded from Snow Leopard Server to Lion Server, all works well so far.
    I had Snowleopard Server supplying the updates to my Snowleopard and Lion clients with no problems.
    I now need to get Lion Software update server running on the Lion Server and would like to avoid having to re download all the updates from Apple
    (The updates are nearly 50Gig and my ISP limit is only 100gig for the month).
    How do I copy in, an rebuild the updates from my Snowleopard server backup?
    I have tried but I think I ran into a permissions problem.
    I'm not that experienced yet with the command Line/terminal but I'm getting there.
    Any help would be appreciated.

    It has to be 10.6.8 I believe, before you can upgrade to Lion. I found some more info, please check out: http://www.informationweek.com/byte/howto/personal-tech/desktop-os/231001728
    Be sure all your programms will work on Lion. Power PC programms do not work anymore (eg Nikon Scan 4 will not work from now on on Mac OS X). Some versions of Canon utilities for camera's do not work, Canon still have to upgrade. For an App Compatibility Table: http://roaringapps.com/apps:table

  • How can we update data in LDAP server using PL/SQL.

    Hi,
    How can we update data in LDAP server using PL/SQL program.
    Is there any sample code for refrence.
    Thanks,
    Tarun

    Hi Justin,
    Thanks for your help. You got my correct requirements.
    Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
    I have the following information:
    the admin user and password,server info , port and ldap_base for admin.
    I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
    Please help me.
    Thanks,
    Edited by: james. on Jan 12, 2009 5:39 PM

  • Login settings will not update the local testing server files

    When uploading to web server from local testing server, changing login settings in the control panel does not update the local testing server Restrict Access to page files. Causing login on website not to function.
    It does however update the Connections file and the login wizard form.
    What is the best way to change login settings before uploading site to web server?
    Thanks
    Dan

    Dan - I am having the same exact problem. I'm using the restrict access and user registration and login - when attempting to use the Update Record wizard to allow users to change their password or email address, it doesn't change the record.

  • HT1338 I updated my MacBook Pro with Mountain Lion and now it is starting slow and opening with some of the programs. How can I fix the problem?

    I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?

    Have you tried starting in Safe Mode and see if the slowness still occurs?
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)
    If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
    Reboot normally and test.

  • Can't insert a CD/DVD into the disc drive.  Recently installed a new harddrive, and the CD/DVD drive hardware is no longer recognized. Also, with new harddrive,  OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP.

    Can't insert a CD/DVD into the disc drive.  Recently installed a new 1 tb hard drive, and the CD/DVD drive hardware is no longer recognized. Also, with new hard drive,  OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP (2.2 GHZ Intel Core 2 Duo.  4 GB 667 MHZ DDR2 SDRAM)

    Also, when I check out the hardware list, under Disc Burning - the following is reported:  No disc burning device was found. If the device is external, make sure it’s connected and turned on.
    The disc drive worked fine prior to the HD upgrade and OS update to Mt. Lion.

  • HT1338 when I updated my mac mini to mountain lion it gave me an icon on my desktop of a hard drive, can I delete this?

    when I updated my mac mini to mountain lion it gave me an icon on my desktop of a hard drive, can I delete this?

    Open the General tab of the Finder's preferences and set it not to be displayed on the desktop. Alternatively, if it's a disk image or external disk, just drag it to the Trash.
    (83576)

  • I have a free agent desk 500GB external hard drive.  Since updating my iMac OS to mountain lion recently, it will no longer backup, stating "an error occurred while creating the backup folder".  Can anyone help me with this?

    I have a free agent desk 500 GB external hard drive.  Since updating my iMac OS to Mountain Lion it no longer backs up through Time Maching like it did in the past.  Now, after completing its work it says, "Unable to complete backup.  An error occurred while creating the backup folder."  I cannot find any sites that help me fix this.  Do I need to purchase a new external hard drive?

    Hi Aaron,
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?

    How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?
    I run a personal Server at my office. It's configured under my own domain as server.mydomain.com. It's setup that it properly receives and sends e-mail for mydomain.com. I use my own mailbox [email protected] to get all my personal mail.
    I'm looking to add another domain as a secondary way for people to get to my content and information.
    I want the same address [email protected] and [email protected] to arrive in the same mailbox at my server.
    How do i do that?

    it does look like you can add virtual domains in the GUI of Server.app on at least some versions, but I don't have an OS X Server 10.8 version handy to check.
    I'd encourage spending some time to learn the command line.  In general, the payoff for learning the command line will be worth the effort expended.  You're running a mail server here and sooner or later the capabilities of the GUI will fail you.  This whether due to a configuration omission in the GUI itself, or due to the need to troubleshoot a malfunctioning mail server, a need to automate one or more of the Postfix-related sequences, or some other IT-related task.  Entirely FWIW, of course.
    Here's a cut-and-paste of the sequence just used to test the command line access to the Postfix configuration, first fetching the current value, appending example.com as the second domain, then displaying the new value, then restarting the Postfix server.  Don't enter the dollar signs; just the postconf command and following.  Adjust example.com to match your domain...
    $ postconf mydestination
    mydestination = $myhostname, localhost.$mydomain, localhost
    $ sudo postconf -e 'mydestination = $myhostname, localhost.$mydomain, localhost, example.com'
    Password: {your admin password here}
    $ postconf mydestination
    mydestination = $myhostname, localhost.$mydomain, localhost, example.com
    $ sudo postfix reload
    The Postfix and Postconf commands work irrespective of the OS X Server version; the tools reference the data files as needed.

  • Do I need to install Security Hotfix (KB2977319) after Cumulative Update 12 for SQL Server 2008 R2 SP2

    HI,
    I have installed Cumulative Update 12 for SQL Server 2008 R2 SP2 on my SharePoint instances. This was to resolve a known  issue faced with the instance. CU12 helped resolve the issue. My company is rather strict regarding security hotfixes. But I am
    not sure if this particular hotfix [Security Hotfix (KB2977319)] is required if the instance has CU12 applied.
    Tested this on a Lab server, the installation did run fine, the summary log also stated that the KB is applied. But the Build Number did not change. Hence the doubt.
    Overall summary:
      Final result:                  Passed
      Exit code (Decimal):           0
      Exit message:                  Passed
      Start time:                    2014-09-06 10:31:21
      End time:                      2014-09-06 10:55:49
      Requested action:              Patch
    Instance SPNTSQLTRN overall summary:
      Final result:                  Passed
      Exit code (Decimal):           0
      Exit message:                  Passed
      Start time:                    2014-09-06 10:48:08
      End time:                      2014-09-06 10:55:45
      Requested action:              Patch
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL2008
      Type:                          RTM
      Version:                       10
      SPLevel:                       2
      KBArticle:                     KB2977319
      KBArticleHyperlink:            http://support.microsoft.com/?kbid=2977319
      PatchType:                     QFE
      AssociatedHotfixBuild:         0
      Platform:                      x64
      PatchLevel:                    10.52.4321.0
      ProductVersion:                10.52.4000.0
      GDRReservedRange:              10.50.4001.0:10.50.4199.0;10.50.4200.0:10.50.4250.0
      PackageName:                   SQLServer2008-KB2977319-x64.exe
      Installation location:         e:\ac2af22d88ee645b5b32b5c178\x64\setup\
    Please inform if I need to apply the hotfix on CU12. Thanks in advance.
    John S

    Yes you must install Security update mentioned in KB 2977319 it is important for SQL Server to be patches with this security update. Without this it could allow an attacker to compromise your system and gain control over it.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • How to use webmail address book on Mac Mini Server with Lion Server.

    I have a Mac Mini Server with Lion Server installed; the webmail is setup and working but I can not get the address book to work.
    I have followed an instruction from this website on how to activate the address book icon in webmail but can not add any addresses.  Is there something that needs to be activatied before it will work?

    No, I didn't solve the problem. The monitor still goes to sleep with WIndows but not with my Mac Mini. About 8 months ago I basically wore out the power switch on my monitor so I bought a wireless power switch to shut it off at the outlet. The VX2835wm monitor itself is now starting to fail as well-- a couple of times it's gone through a weird sequence of flashing screen colors on power up and ended up in an overscan mode (that took me for ever to figure out how to fix). I have decided to replace my VX2835wm with a Dell u2412m once it fails for good partly because I really want to keep the 16:10 resolution (very hard to find these days) and partly because I want to see if a different make of monitor will go to sleep properly based upon my Mac Mini power down settings.

  • I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
    Also Time Machine does not back up a boot camp partition.

Maybe you are looking for

  • New Power Adapter Doesn't fit right

    The power adapter for my iBook G3 started only working when it really felt like it, so I check the discussion boards about buying a new one. I saw the link about Shentech.com, which indicated their power cord was the same as the one bought from the A

  • How to delete duplicate row in certain case

    Hi all,</p> <p>I need you help to delete my duplicate row.</p> <p>Sample Data in table (<b>table1</b>)</p> <p style="margin-top: 0; margin-bottom: 0"> </p> <p style="margin-top: 0; margin-bottom: 0"><b>Timein        DateIn            locationin      

  • TIMESTAMPDIFF  function in OBIEE Answers

    Hi experts, I have a Answers report, where I have included a column and changing the fx formula to find out the time diff .. TIMESTAMPDIFF(SQL_TSI_DAY, "Bank Transactions - Payor Aging".AccountingDate, "Bank Transactions - Payor Aging".AccountingDate

  • CS5 and ACR

    I use CS5 but the ACR version is not suitable for Fuji X-Pro 1 camera..... my options seem to be either convert RAW files to DNG (extremley slow) or join Adobe CC. Anybody else with same problem and bright ideas would be appreciated.

  • I deleted a very important pages file from my iPad and I need it back

    I deleted a very important pages file from my iPad and I need it back pronto! I just updated my iPad without a computer and it had the file there. I need to know how to get back the file very quickly. thx in advance