Update 7.6 wont work for windows

I was trying to purchase new music on iTunes and it said that I needed to upgrade my iTunes before I could purchase. I went to upgrade, downloaded the file, and started to run it when I received this error: "This iTunes installer requires that your computer is running Windows XP or Windows Vista"
Any ideas on what to do because I am running Windows?

Since you have Win 2000, you are stuck between a rock and a hard place. Apple stopped supporting new iTunes releases on Win 2000 a while back.
SO the message you are getting, is telling you that iTunes won't install because it is only supported now on XP and Vista....not Win 2000.
On the iTunes download page, here are the requirements in fine print:
Windows Requirements
32-bit editions of Windows XP Service Pack 2 or Vista
64-bit editions of Windows Vista
What you CAN do is go to a friend's house who has the latest iTunes, buy the song on that PC and then put it on a USB drive. Then take it off the USB onto your Win2000 machine.
Message was edited by: Katrina S.

Similar Messages

  • Quicktime 7 wont work for windows 98...

    does anyone know where i can download an older version of quicktime or an email i can use to contact these people to ask something similar. i have gone to download.com to find and older version of quicktime but cant find one.

    You can get QT 6.5.2 for Windows here. That's the last version supported on Win 98.
    (-:

  • After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue?

    After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue? I did the audio troubleshooting and it says everything is fine. I have a Toshiba Satellite L75D-A7280.

    Download/install an app is a know possible solution.
    3. Install another app from the App Store
    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    Above from Apple's :
    iOS: Troubleshooting applications purchased from the App Store

  • Updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts

    updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts

    I called Vodafone corporate help desk as I have a company phone :-
    I was told to hold down the off button at the top of the handset at the same time as holding down the round menu button at the bottom of the handset for 20 seconds - the phone went off, then restarted and it all seems OK now.
    Def something with the ios 6.1.2 upgrade :-((

  • TS2774 hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistic

    hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistics

    They are not a supported carrier. You'll have to take it up with them.

  • M1522 nf scanner is not working for windows 8.1

    till windows 7 scanner & printer is working.
    windows 8.1 scanner is not working.
    i tried all the softwares in page http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3442754&spf_p...
    please update your softwares that are not working for windows 8.1

    Hello Nani134,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet M1522nf is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim

    I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim

    Hello Aaron1658,
    It sounds like you are unable to activate your phone with the SIM provided to you by your carrier. Try these steps in the following article to help you troubleshoot what it happening, named:
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/ts3424
    Symptoms
    Your iPhone may display one of the following messages when you attempt to activate it:
    "Your iPhone could not be activated because the activation server is temporarily unavailable."
    "The SIM card inserted in this iPhone does not appear to be supported"
    "The iPhone is not recognized and cannot be activated for service."
    "iTunes was unable to verify your device."
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
    If this is not what you are referring to, would you provide some more information about what is happening? Any error messages, prompts, etc.?
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP

    I just reinstalled a T60 from scratch TWICE  to the point of updating  - Intel Wireless Wifi Link for Windows XP -
    Just after that very latest Update (3.1.1.1 or so?)  there is no WLAN possible and I had to find out, that  a system restore is impossible either! (Simply does not work and asks me to get another point and try again)
    I have a full backup done by acronis 2010 so that does not bother me so very much.
    The point is that I like to WARN everybody to install that Update to their T60  e.g. 2008YWJ !!!
    (contains 3945AGB WLAN Module!)
    After Updating U HAVE NO CHANCE TO REPAIR IT! U get always the problem signature 
    szAppName: AcSvc.exe  szAppVer: 5.6.1.33  szModName: PfMgrApi.dll
    szModVer : 13.0.0.2  offset: 000d4912
    and the System wants to report that stuff to MicroSoft...again and again...every time u
    start AccessConnections.
    U can DEinstall AccessConnections and Intel Wireless Wifi Link for XP completely, reboot
     and REinstall it....just 2 get the same messages and NO WLAN anymore.
    I could not get out of this Driver Installation Hell until I did a complete Recovery Install and
     I got back to Hell when System Update REinstalled Intel Wireless WiFi Link for XP
    automagically...;-(((
    And again NO CHANCE to roll back, No chance to get rid of that annoying bug. This time I have an ACRONIS-Image so I can spare some time....
    Somebody shoud really CHECK this, because it should not be possible to break down an completely NICE RUNNING Thinkpad THIS WAY just by updating it! As it took me abaout 12 Hours of Administration by now I
    really would apreciate to help whomever to find out what the hell is responsible 4 this !!!
    Why is XP System Restore not working on an T60 to roll back to Point b4 installation of this Update???
    (I could  not use that Thinkvantage-System Recovery because it did not even get all its updates by the 
    time the system went in limbo during install! What i defintely can say is that it breaks at exactely
    same point when Intel Wifi Updates is installed...
    I do my Acronis Restore now and try 2 avoid this Update....;-(
    if anybody KNOWS how to get that system 2 an earlier point of an install orgy i whould be thankful to get that information...
    I am keeping alive 12 Thinkpads here R40 R50 T42 T43 T60 T61p T400 T500 and  NEVER
    experienced problems like this in many  years!
    cheers
        GAL9000

    gal9000, welcome to the forum,
    have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
    Hope this helps.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Usb & sdcard port wont work in windows 7

    Hi all,
    my usb & sdcard port wont work in windows 7, also i cant install drivers for coprocesor and the sm bus controller,   I have a macbook pro 13" A1278, 
    I have tryed to install the drivers from the osx cd,  but to no avail it just wont work, 
    Please can anyone help

    the reason i ask is base system device can be a few differant things but about 90% of what i have seen it show up is the card reader. try to uninstall anything in device manager that has to do with the mic and restart the laptop. this will allow windows to try to find and install the correct drivers. also open realtek HD audio manager and make sure the mic is not muted.
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • Indesign wont work in windows 7 now, what do i do?

    Im getting all kinds of not supported information for Indesign and it wont open.

    Hi,
    Please try to download the latest updates for Indesign application through the link below:
    All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
    Regards,
    Sheena

  • Digital card reader no longer works for Windows 7 Pc, 3yrs old

    Help, my digital card reader no longer works for Windows, 32bytes, on my 3 year old pc.  HP does not have any any down loads for this.  Any suggestions where else I can find them that would not interferre with other functions of my pc

    Hi,
    What is your machine ? The following devices may help:
       http://www.ebay.com.au/bhp/usb-card-reader
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can't get itunes to work for windows xp 64 bit

    I can't get itunes to work for windows xp 64 bit. It won't even download.

    These are the Windows requirements according to the iTunes dpownload site http://www.apple.com/uk/itunes/download/http://:
    Windows XP Service Pack 2 or later; 32-bit editions of Windows Vista, Windows 7 or Windows 8
    64-bit editions of Windows Vista, Windows 7 or Windows 8 require the iTunes 64-bit installer
    xp 64 bit is not mentioned but it doesn't seem to be supported for the latest ITunes so it seems that you're out of luck.

  • I installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank

    i installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank- does anyone knw how to fix this?

    Looks like blame is incorrectly placed. Turns out my iSCSI connector is struggling with Mavericks. When I placed the iTunes library on a local drive, everything came back to normal.

  • Help with PDF formsmaking them work for Windows users

    I'm using a new user of Acrobat 8.0.0 and having a helluva time figuring out how to make PDF forms that work for Windows users.
    I can make the forms okay and Mac users can fill them out (using either Preview or Reader), and I get them emailed to me just fine. But all of the PC users that I send them to tell me that they "can't save them."
    Here's a test PDF I've created (with just a few plain fields in it):
    http://www.braintoniq.com/dropbox/test.pdf
    Can someone who's got XP tell me what I'm doing wrong? Or what I can tell my XP users how to save it and be able to email it back with their text.
    thank you!

    tuqqer;
    Worked on my Firefox browser PDF plug-in running XP on my MBP. Opened the completed form in Adobe Reader 9 Windows and all looked fine. Just a note on your fields; date field not properly formatted and once filled, it has the same name as the NAME field. Just make sure our fields are named separately.
    Best.
    P.

  • When I try to login to icloud I get a message that says my appleid is valid but it wont work for icloud. What do I do?

    when I try to login to icloud I get a message that says my appleid is valid but it wont work for icloud. What do I do?

    Hi ljzimprich!
    To have a better understanding of your issue, please let everyone know which model printer you own and what operating system you are connecting it to. That way, community will be able to assist you with suggestions appropriate for your product.
    Thanks!

Maybe you are looking for

  • A better way to run a 7 day report?

    Using Crystal Reports 11 I am hoping there is a better way of running a seven day report that i have to run weekly In the report i have it set when refreshing the document, the "Prompt for new parameter values" comes up and there is a date field for

  • More than 5 tabs in tab bar controller

    Hi, I'm totally at a lost trying to get 6 tabs connected to my tab bar controller, which was created using the tab bar controller template.  Everything thing works fine with 5 view controllers.  When I add a 6th view controller I get the "More" tab i

  • FF_5 - Import Bank Statement, Err: Formatting error in the field COBL-KOSTL

    Hi When importing the bank statement I'm getting the error Error: (00 298) Formatting error in the field COBL-KOSTL ; see next message Why is it doing this? In OKB9 I have the GL Account and the cost center assigned. It is the ne GL that is giving th

  • What format should I use

    Wondering if anyone knows the quicktime compression format used for movie trailers. I'm looking for a great looking streaming video compression. Got about 40 videos to post. Thanks

  • Identity Service 6.2 with ALI 6.0 SP1 - error

    Hello, I have installed Identity Service 6.2 on top a portal server. Trying to sync it with AD is not working. It keeps bombing on try to create an authentication source and profile source. I checked the ISS logs and it keeps throwing 500 errors. 200