Update decimal places in sales and use tax percentage rate [FTXP]

i need to update the decimal places in the tax percentage rate. i've gone through all of the tax configuration in the img several times and it is not there. have searched the internet for an answer to this, and am not finding it. need to update from four digits to the right of the decimal to five digits to the right of the decimal point.
for example, adjusting a tax rate field of 5.1234 to 5.12345, where the field will allow 5 digits.

Hi,
SAP has hardcoded in the program MF82TI00 to pick only the three places after decimal. Rest will be ignored.
In case this is your legal requirement, I will suggest to rather create an OSS message with SAP.
Regards,
Gaurav

Similar Messages

Sales Report for US Sales and Use tax

Hi,
I'm looking for t-code to extract detailed sales report having Gross sales, Exempt sales , Ship to state, Ship to County\ City, Sales Tax collected. If I'm getting this report i can verify what my sales tax software is updating.
When i extract tcode - ZINVLIS i don't get much detail.
Please help me in extracting complete sales detail which can be used for sales and use tax verification process and audit purpose.
Thanks,
Karthik

Hi Karthik,
There is no standard report available as per my knowledge.You may develop Z report to achive your requirment. Check some LIS report can give data (MC01 is transaction where you can check all type of key figure reports)
Regards
Mani Kumar

Error while posting to Tax Journal Entry for sales and use tax

Hi,
I am trying to post a journal entry (FB50) to cleanup and correct the liability on our sales and use tax. All lines are giving warnings and messages.Give me a suggestion on how to get it to post . Or if needed, another solution to correcting the balances in the sales and use taxes.
But the entry to a/c # 226530 is giving an information message but still wouldnu2019t save.
The Error message is
Enter the tax base amounts for account 226400 in company codeAFCO
Message no. F5A375
Diagnosis
You are posting directly to a tax account. Enter the tax base amounts per item using the function "Tax Amounts".
Kindly help me how to fix the above issue.
Thanks
Suvarna

You may want to check out the following notes... they may shed some light on your problem.
681930 - Posting on tax account possible w/o specific. of base amount
1090096 - FB60 / MIRO - Checking direct tax after change (F5A375)
944978 - FB60 / MIRO - check of direct tax after change

Sales and Use Tax Packages

Here at KeySpan we are in the process of upgrading to Oracle 11i. We are also evaluating software packages for calculating sales
and use tax in conjunction with Oracle Purchasing and Payables modules. How are other organizations doing this? Did you use
the existing functionality in Oracle or purchase a package like Vertex or Taxware?
- Mike Stankard

Did you comeup with any solution for this??

Texas Sales and Use Tax - SAP Automatic Tax Code Assignment

We are an end user industry of materials and services - Refining. We are also using SAP - 4.6C platform. What are others in the SAP environment doing to address proper taxing assignment to purchased materials and services in the great state of Texas? As you may be aware the Texas State Sales and Use tax rules are probably the most difficult to understand and comply with that exist. I am embarking on developing a custom solution to automatically assign the proper tax code on purchase orders depending on key indicators associated with maintenance orders and material groups, etc.

The Sales and Use tax code assignment can be handled at the creation of the purchase order for plan purchases of goods and services, and at the accounts payable level when the invoice is process. At each step the necessary tax code must be populated on the jurisdiction field.

US: Tax-setup of Sales and Use Tax in a company located in Michigan, US

Dear all!
Below it's described how the A/P-taxes have to be handeld in our company in Michigan, US. We want to use a very simple TAXUS-setup (No Jurisdiction). Actually we have problem in setting up the tax-scheme of TAXUS with the following cases:
In the US, there are four situations for our Sales/Use Tax. All four are for A/P only. All four are related to the State of Michigan. The applicable tax rate is either 0% (exempt from tax) or 6% (taxable).
The first two involve invoices that are correct from the vendor and nothing special needs to be done. The
payment is made to the vendor and the full amount of the invoice is booked to the expense account (i.e. 123456 Telephone).
1. The vendor DOES NOT charge sales tax on items that are EXEMPT from sales tax.
2. The vendor DOES charge sales tax on items that are TAXABLE.
The second two situations involve invoices that are incorrect from the vendor and our company must account for the sales/use tax.
3. The vendor DOES NOT charge sales tax on items that are TAXABLE. Our company must accrue for the tax due to the State of Michigan and pay it at the end of the period.
4. The vendor DOES charge sales tax on items that are EXEMPT from sales tax. Our company must either deduct the sales tax on the invoice from the payment and reduce the amount paid to the vendor OR pay the invoice in full and book the overpayment of tax against the accruals from item #3.
Especially case #3 is actually the biggest challenge to be setup in the system in order to get the amounts correctly calculated. To our opinion the SAP has to create an additional tax-line item.
Thanks a lot for a helpful answer or solution!
Regards,
Bernd

Hi Bernd,
Did you get a solution for your query? If so, can you please share that? I have the same scenario for Geismar, Louisiana.
Please let me know how did you configure the Accrued tax. Really appreciate your response.
Thanks, Reji.

Sales and use tax or self assessed tax

Hello,
I am supposed to configure Use tax for a client.
I have checked metalink note on configuring use tax, somehow it is not complete.
If someone could help me find a document that speaks about use tax, it would be a great help.
Regards,
Shilpa

the below note helped resolve my requirement pertaining to Use tax:
How to Configure a Tax to Self-Assess in R12 E-Business Tax (EBTax) and Payables (Offset, Use Tax) [ID 948414.1]
Thanks.

Service PO Sales and Use Tax Conditions

I'm trying to located where the details of the tax condition JP1I is located. Its not konv. In there you see the NAVS but this is a sum of all levels of tax.
Does anyone know where to find JP1I. It might be BSET but I need the link.
Any help will be rewarded.
Thanks,
Richard

HI,
First find the condition type in the tax procedure which is in FI - Tax on goods movement - define calculation procedure
If you want to check the condition type then go to MM - purchasing - Conditions - Define price determination - Define condition type and check for the funtionality of this condition type.
Thanks & Regards,
Kiran

How we can increase decimal places in Sales Order for Qty

Hi,
In Sales Order qty field now its 3 decimal places for MON unit of measure but we want 4. how we can increase decimal places.
Thanks in advance
Thanks & Regards,
PM

To elaborate better.
Again, use Tcode CUNI - Unit of measurement : Initial Screen.
At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
And click on UNIT OF MEASUREMENT button.
In that you will find MON - Month.
There go for details by selecting MON or select MON and press F5 from Key board.
For MON unit maintain following parameter as per your requirement:
-Number of decimal places for number display
Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
-Base ten exponent for floating-point display
Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
And deselect commercial meas. unit in application parameters section.
I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
Thanks & Regards
JP

Difference between Decimal places for Quatities and Units

Can anyone please explain the difference between the followings -
1. Number of Decimal places for Quantities, and
2. Number of Decimal places for Units
In SAP B1 2007B General Settings.

Hi,
The Decimal places in the general setting indicates
Amounts:Display of row and document details
Prices:Display for price fields in documents,item data,price lists
Rates:Display of decimals in currency calculation
Quantity:Display of quantity in documents and item data
Percent:Display used in calculation of tax amounts and discounts
Units:Display used in units(UoM) of items.
Also refer these note:[737880|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000737880]
Hope this is helpful

Error while updating decimal places in general settings

Hii All
         I have got an error while updating Decimal places in General Settings
Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
Note : there are no postings yet, a fresh database for a new client
         what could be the possible reason
                                                             thanks
                                                                     RIYAZ

Hiii All
      As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
          would be helpfull if there is any other way..
                                            Thanks
                                                     RIYAZ

Getting the default zero-rated sales and purchase tax codes

Hi,
Does anyone know how to obtain the default zero-rated sales and purchase tax codes? ie the tax exempt sale and purchase tax codes. The OADM holds the default sales and purchase tax codes but not the default zero-rated sales and purchase tax codes. Is this set by region?
Lita

Hi Lita,
I don't know much about the zero rated tax codes or where it is set up, but what I can suggest is if you know where the system retrieves it (say on an Invoice) that you use SQL Profiler to possibly investigate where the queries are pulled from.
Where in SBO is the zero-rated tax codes used?
Hope it helps,
Adele

Is it possible for Apple Time Capsule place iphoto library and use it with my macbooks

Is it possible for Apple Time Capsule place iphoto library and use it with my macbook pro & macbook air? How about the simultaneous use? Will I as well open it in my ipad and iphoto?

How Come? I thought that to an external drive move iphoto library is not a problem - https://discussions.apple.com/thread/3012995?tstart=0. And Apple Time Capsule including the an external drive.

Which table stores the Tax percentage rate of commercial invoice?

Which data base table stores the tax percentage rate of the items in a commercial invoice? Or which FM can return the tax percentage rate?

HI,
Don't post the duplicate threads for same requirement...it against to the SCN rules. Moderator can delete this thread.
Report to Moderator!!!

Cannot Update Decimal Places in General Settings

When I try to update the decimal points in the Administration > System Initialization > General Settings > Display path, SAP B1 gives me the following error:
"Cannot update while another user is connected to the company."
I am the only one on the system as "manager" with "Super User" and "Full Authorization"...
The SAP B1 Guide titled "How to Make Initial Setting in Business One - US" says "you can change these settings at any time".
QUESTION: What might be stopping this change, and more importantly, how do I get around this error to be able to change the decimal points?
Thanks all - Zal

Hi Zal,
I agree with you about the strange messaging used by SAP.
But blocking the possibility to decrease the decimal places is extremely important.
Suppose you have inserted a sales document with two items in this way:
Item 1 ___Qty 1,234 ___Unit price 1,22 ___Line total 1,51
Item 2 ___Qty 5,756 ___Unit price 3,15 ___Line total 18,13
____Document total 19,64
Then, someone wants to change the number of decimal places of the quantity from 3 to 2.
What happens would be:
Item 1 ___Qty 1,23 ___Unit price 1,22 ___Line total 1,51
Item 2 ___Qty 5,75 ___Unit price 3,15 ___Line total 18,13
____Document total 19,64
If you try to do the calculations manually you will see that the results are not correct. In fact all the document would have to change in:
Item 1 ___Qty 1,23 ___Unit price 1,22 ___Line total 1,50
Item 2 ___Qty 5,75 ___Unit price 3,15 ___Line total 18,11
____Document total 19,61
Also if the document total will show correct (in the case of rounding the second decimal position of item 2), the totals of any line is wrong. In fact there is no recalculation at all in SAP (and must not be done).
Imagine such a modification over thousand of documents and all of the descendants (mainly if the have lead to printouts - as say confirmations - sent to customers or vendors).
None of the economic figures will match.
BR
Antonio

Update decimal places in sales and use tax percentage rate [FTXP]

Similar Messages

Maybe you are looking for