Update of photoshop CC - trouble with NVIDIA Quadro 1000M display driver. PS freezes

Hey guys,
Since today I've got trouble with my PS CC.
I've updated PS CC yesterday 2014-12-12.
I was doing some drawings today and two times PS freezes during switching layers of or selecting a mask.
A message appeared that there was trouble with the display driver an PS switched off the GPU support because of that issue.
Ok, I thought let's update the display driver and so I've done today. I switched to actual NVIDIA display driver version 314.21
I'm working with an NVIDIA Quadro 1000M on a DELL mobile Workstation Precision M4600 with 8 GB RAM.
Now when I start up PS and press alt+k, my 2 displays showing a black screen for 1-2 seconds.
After closing the general setup window again black screen for 1-2 sec and the top menu bar is showing no entries.
When I move the mouse pointer over the bar, the menus appear again. But the bar is like transparent at the parts where no menues are.
When I unlock the window from the screen an put it back fitting to the screen everything looks like normal.
Till today I hadn't any problem with my notebook in that kind of way.
Maybe someone has or had similar problems.
Would be nice if someone can help me.
thanks

Oh, that sounds very bad. It's not that bad for me. It's not crashing that often at the moment, only black screens at start up or if setting dialog is opened. But I will see tomorrow how often it will crash, during today it crashed 2 times when doing some ridiculous simple actions like switchid to another layer  and the other time when trying to edit an mask layer. I will contact the support chat on monday regarding this issue. Maybe there is a solution or an update soon... I keep may fingers crossed for you.

Similar Messages

  • Video sync problem with nvidia quadro fx cards, edge blending on.

    when I start edge blending feature of my nvidia quadro fx 3500 driver on 2 projectors, quicktime goes out of synchronization between audio and display. it's not directly related with framerate cuz my own opengl application with quicktime sdk, renders with 300+ fps succesfully but still the video is out of sync...

    Hi there, welcome to forum.
    "*Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks."
    your PSU is good one and should be powerfull enough.
    Output    +3.3V@28A, +5V@30A, +12V@34A, [email protected], [email protected], +5VSB@2A
    can't be power related, since at 1st your PSU must be enough, 2nd same issue happend with your old mx 440 VGA. card malfunction are dismissed as possibility as well since its work fine in another machine.
    think its drivers mess. ATI drivers(or part of them) still exist, guess is not completely removed. same symptoms happend many times when switching between Ati to NV, lagging 2D scrolling lag and etc, caused by ATI Smart (part of ATI Drivers) sometimes remain(survive after driver cleaner).
    suggest you a new clean fresh OS installation. like Nv support already directed. also ensure in BIOS, in "Integrated Peripherals", "Init Display First" are configured to AGP.
    let we know how its going, if problem persist we a ready with a tips to resolve your issue.

  • T61 with Nvidia QUADRO: DVI on Advanced mini doc don't work

    Hello all,
    I have a very annoying problem with lenovo T61 with NVidia quadro nvs 140 (type 7664-1GG, 1400x900, 7200rpm wdigital hard upgrade, Vista Ultimate x86, 4 Gb RAM (2 Gb upgrade)). The external display (ViewSonic VP2030 20") on DVI does not work after turning reboot or undocking/docking again. Usually a reboot resolves the issue, but not now: finally it doesn't work even after rebooting. If I plug it (or another display) via D-SUB, it will work. The monitor's DVI definitely in excellent condition.
    It happend several times previously with various drivers and BIOS versions, better with one BIOS version and worse with another. Now I have the latest BIOS and latest NVidia driver.
    Please, help!!!!

    Hello all,
    I have a very annoying problem with lenovo T61 with NVidia quadro nvs 140 (type 7664-1GG, 1400x900, 7200rpm wdigital hard upgrade, Vista Ultimate x86, 4 Gb RAM (2 Gb upgrade)). The external display (ViewSonic VP2030 20") on DVI does not work after turning reboot or undocking/docking again. Usually a reboot resolves the issue, but not now: finally it doesn't work even after rebooting. If I plug it (or another display) via D-SUB, it will work. The monitor's DVI definitely in excellent condition.
    It happend several times previously with various drivers and BIOS versions, better with one BIOS version and worse with another. Now I have the latest BIOS and latest NVidia driver.
    Please, help!!!!

  • Photomerge: no final image after 10.6.7 with Nvidia Quadro 4000

    Hi, as it was stated in similar thread I have this issue. / http://forums.adobe.com/thread/852821?tstart=0 /
    But in tha threat mentioned above, problem was solved:
    "3. May 18, 2011 3:50 PM in response to: Chris Cox
    Re: Photomerge Crashes
    I think the problem was that there was an "ñ" in the file names. Now it works!"
    My file names are: _MG_7975_1z3.psd
    So probably it is not a problem with the name. I have:
      Model Name: Mac Pro
      Model Identifier: MacPro4,1
      Processor Name: Quad-Core Intel Xeon
      Processor Speed: 2.93 GHz
      Number Of Processors: 2
      Total Number Of Cores: 8
      Memory: 20 GB
    with Nvidia Quadro 4000 installed.
    After I downloaded 10.6.7 I had a problem with my graphic card, new mac OS version erased something but I solved it when I found on Nvidia forum solution and downloaded new Nvidia 4000 drivers. But help me now with new problem: photomerge - no final image. I have a huge project with extensive using of that tool. Thanks in advance!

    I think that it is the answer:

  • With the latest update, i have some trouble with youtube. Every videos that i watch are shaking. Is there something to fix it?

    With the latest update, i have some trouble with youtube. Every videos that i watch are shaking. Is there something to fix it?

    Instantly worked, found this on other thread!!
    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
    2. Safari > Preferences > Privacy
        Press the button “ Remove All Website Data”.
    *Dont forget to restart Safari

  • Hello, i have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please??

    hello, i have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please??

    jasonf18090788 wrote:
    i saw in the site Adobe that the video card is compatible with AE and Pr, but not work.
    Where did you see that? It's not on the list for AE: System requirements | After Effects
    Keep in mind that After Effects only uses the GPU for one, obsolete thing. GPU matters very little for AE. See this: GPU (CUDA, OpenGL) features in After Effects CS6 and After Effects CC

  • Set Nvidia Quadro 1000M as primary card.

    Hello all. I have issue with Nvidia Quadro card 1000M on Windows 8. I set discrete graphic in bios and saved settings.
    But on Windows startup at login screen it goes black and only helps to restart and set it back to optimus or integrated.
    How to setup discrete graphic card as primary video card.

    Hey there iThinkSL,
    To get some clarity to best direct you, what machine are using? If you could, give us your machine type and model number?
    Additionally, have you made sure that your Nvida Quadro Card 1000M has the latest Windows 8 Driver? (I wasn't sure of your machine, so I linked the Driver Matrix page)
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

    Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
    Hi all,
    When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated.  However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
    Thank you!
    HN

    Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG?  Show the same area of the photo and zoom to 100%.
    It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
    The amount of grain depends on the ISO sensitivity setting on the camera.

  • Trouble with mobile site. Displays for a second then screen goes black.

    Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/

    I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
    At first:
    Two seconds later:
    I noticed this on 4/7/12. Does anyone NOT have this problem?
    Matt

  • Problem with NVidia Quadro FX 4000 on MSI K8T Master2-Far

    Hello everyone, I am new to the forums here.  I cannot figure out what is causing my problem.
    I have been having performance issues with my new Quadro FX 4000 on my system.  I have been in communication with Nvidia tech support for a while now.  Here is the discussion I have been having with them.  It explains my problem in detail.  Be sure to read it from bottom to top though.
    *Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks.
    Response (GL)
    Pat,
    I have checked the NVBug Database and although there has been Bugs submitted where a MSI Master2-Far motherboard was used, none of the issues were caused by the motherboard. They just happened to have a MSI Master2-Far motherboard.
    We have seen conflicts when both ATI and NVIDIA drivers are both installed, but I would hope that the Driver Cleaner software removed the lines in the registry as well.
    Did you try the FX4000 in the other system (the one that had the MX 440) ?
    I believe you are taking to right steps in resolving this issue.
    Looking at the Windows Error Reporting, it seems you have had some app problems.
    Looking forward in hearing your results
    Best regards,
    NVIDIA Customer Care.
     Customer (Pat Miller) 02/07/2007 12:19 AM 
    OK I completed my tests and got some interesting results.
    -I installed the GeForce Mx 440 on my computer and it yielded similar poor performance just like the Quadro did (terrible window scrolling, stuttering, horrible gaming).
    -I then installed the Quadro on the computer I yanked the Geforce MX 440 from.  I installed the most recent drivers, and it worked WONDERFULLY.  There was no stuttering, no lagging, and Open GL gaming seemed even better than the MX 440 (I know the Quadro is not designed for gaming, but some Open GL counter-strike served as a nice little test.)  Unfortunately, that computer does not have Adobe Premiere or any high-end applications for me to really test the card with.
    -After those two tests, I uninstalled the MX 440 from my computer and re-installed its ORIGINAL ATI 9600 SE.  It worked just like it did before I first received the Quadro.  No window lagging, no stuttering, and adequate gaming.
    All of these test yield a few conclusions to me:
    1. The Quadro FX 4000 card is not defective, it does indeed work.
    2. My computer seems to dislike Nvidia cards and/or drivers (seeing as the Quadro and GeForce gave me terrible results while the ATI worked fine.)
    It would seem to be a driver issue, almost like my original ATI driver files are still running.  That would explain everything.  However, I completely removed the ATI driver AND ran Driver Cleaner to clear all ATI files from my system before attempting to install the Nvidia card.
    I cannot think of a reason for these inconsistencies. Tomorrow I plan on preparing to completely crash my computer. Backup my files and completely format my HD's and reinstalled Windows XP Pro, my Mobo software, all drivers, ect.
    I will await any ideas or suggestions before I format my computer.  I hope these tests along with my system info helps.  Thank you very much.
     Customer (Pat Miller) 02/06/2007 07:51 PM 
    Ok,
    Here is my system info.  I realize that the Quadro FX 4000 has a conflicting IRQ with my onboard gigabyte ethernet, but my old ATI card was the same way, and it never caused a problem.  Also, I am unsure how to fix that anyways.  Hopefully this info helps us determine the problem.
    I am going to try a few tests of my own.  I am going to install a GeForce MX 440 AGP card(from my other computer) and see how it performs.  Then I will try re-installing my old ATI 9600SE card.  If I get similar low performance, than it must be something else besides the card.  Otherwise, the card is the issue.
    Thanks for the help.
     Response (GL) 02/06/2007 12:15 PM 
    Pat,
    Maybe the system info will shed some light.
    Please perform the following steps:
    1) Click on the Start button
    2) Select Run
    3) In the Open field, type in "msinfo32" and then press the OK button
    4) This will bring up the Microsoft System Information Utility. 
        Click on File and then Save to save this information to your hard drive. You may give it any name you choose.
    5) Once the file has been saved on your hard drive, attach it to this support request so that we may review your system configuration.
    Looking forward for your response.
    Best regards,
    NVIDIA Customer Care.
     Customer (Pat Miller) 02/02/2007 05:19 PM 
    I completely uninstalled my old ATI and Nvidia drivers.  I went into safe mode and ran Driver Cleaner also.  I freshly installed the new Nvidia driver and I still have low performance.
    I am trying to download Viewperf, but it is downloading at about 30k/s, which will take about a day to finish.  What else could be causing this?  It is possible its a bad card? I got it new on Ebay from a legitimate seller, but it came with the card only.
     Response (GL) 02/01/2007 06:00 PM 
    Thank you for contacting NVIDIA Customer Care
    There should not be any performance drop browsing the internet or moving windows across screens.
    Since you did have an ATI card installed, you may want to verify that all files have been removed.
    This also includes the registry since there are applications known to leave files behind.
    Once all ATI files have been removed, please run a benchmark software such as ViewPerf.
    Viewperf 9.03 can be found on the following location:
    http://www.spec.org/gpc/downloadindex.html
    Best regards
    NVIDIA Customer Care
     Customer (Pat Miller) 02/01/2007 01:35 PM 
    I recently upgraded to a Quadro FX 4000.  I do a lot of video editing on Premiere, and from what I read, it seemed like the best card to get.  However, I am getting very poor performance with this card.  For example, just browing the internet and moving windows around yields a very stuttery picture.  And I do not notice any different using Premiere.
    I uninstalled my old video card (ATI 9600 SE) and uninstalled the drivers for it as well.
    I have tried 3 different versions of drivers for the Quadro 4000, including the most recent.
    I have checked the power connections, and the card is receiving power on both the ports.
    I really have no idea what could be causing this bad performance.  Is this how the card works?  Did my ATI 9600SE yield better performance for internet browsing than this card does?  The only thing I can think of is that the card is not getting enough power because it connects to 2 seperate power cables from the PSU which already power lots of other things (HD's, Disk Drives, Fans).
    Any help is greatly appreciated.  Here at my system specs:
    Custom built PC
    MSI Master2-Far Mobo
    2x AMD Opteron 244
    2G Transcend DDR 333 Registered Ram(1 stick)
    2x WD 74G Raptors (RAID 0)
    1x Maxtor 250G
    2x DVD burner
    1x DVD Rom
    Quadro FX 4000 AGP
    *Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks.

    Hi there, welcome to forum.
    "*Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks."
    your PSU is good one and should be powerfull enough.
    Output    +3.3V@28A, +5V@30A, +12V@34A, [email protected], [email protected], +5VSB@2A
    can't be power related, since at 1st your PSU must be enough, 2nd same issue happend with your old mx 440 VGA. card malfunction are dismissed as possibility as well since its work fine in another machine.
    think its drivers mess. ATI drivers(or part of them) still exist, guess is not completely removed. same symptoms happend many times when switching between Ati to NV, lagging 2D scrolling lag and etc, caused by ATI Smart (part of ATI Drivers) sometimes remain(survive after driver cleaner).
    suggest you a new clean fresh OS installation. like Nv support already directed. also ensure in BIOS, in "Integrated Peripherals", "Init Display First" are configured to AGP.
    let we know how its going, if problem persist we a ready with a tips to resolve your issue.

  • T61 will not boot with nvidia quadro 140m driver

    Hi all,
    A couple of weeks ago, after allowing MS update to install some FTDI driver updates, my system will not boot up and hangs shortly after the initial vista loading screen. The screen goes black with some HD activity and eventually reboots. After trying a couple of restore points with no luck, I started to remove the latest driver updates and other software to my system again with no luck. 
    If I uninstall the nvidia driver and use the Standard VGA driver, it will boot and come up properly. I've done a bunch of web searches and searches on this site and can't find my exact circumstances. Its hard to believe that it could be a  hardware issue since it started after a software update, but since it hasn't been a problem for anyone else, I'm just not sure at this point.
    I've tried earlier versions of the nvidia driver, removing other drivers and services trying to find a coincidence, but nothing seems to work. I'm kind of at a loss at this point. Does anyone have some suggestions?
    Thanks in advance,
    Dave

    More info on my system:
    OS Name    Microsoft® Windows Vista™ Business
    Version    6.0.6001 Service Pack 1 Build 6001
    System Model    6459CTO
    System Type    x64-based PC
    Processor    Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz, 2401 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date    LENOVO 7LETC5WW (2.25 ), 11/14/2008
    SMBIOS Version    2.4
    Installed Physical Memory (RAM)    4.00 GB
    Also, does anyone know if using the Standard VGA Display driver without problems on this system means that the video card hardware is working? In other words, I'm trying to rule out a hardware problem with my nvidia quadro 140m card, so if the system works fine with the standard vga driver, would that mean the hardware on the card is ok? 
    Thanks,
    Dave

  • Missing GPU Acceleration With NVIDIA Quadro 4000

    Hi -
    I have a PC running Windows 7 with an NVIDIA Quadro 4000 card and 16GB of RAM. I have both Premiere Pro CS6 v6.0.5 and Premiere Pro CC v7.2.2 (just installed).
    When I create a new project in CC, my only option under Video Rendering and Playback is Mercury Playback Engine Software Only. However, when I open a project in CS6, I get that option and also Mercury Playback Engine GPU Accelerated (CUDA).
    Any thoughts on why the GPU option would not be available to me in CC?
    Ed

    Hi Mesmer3001,
    I will suggest you to do a clean uninstall of all NVidia drivers and then re-install the latest one from the NVidia website. So, please follow the steps mentioned below.
    Go to Device manager, right click on the graphivs card and select update driver software.
    Select Browse my computer for driver software option.
    Then on next screen choose Let me pick from a list option
    Choose standard VGA graphics adapter which will choose VGA mode for your machine.
    Then go to Control Panel and uninstall all the NVidia drivers. Restart the machine once it is done. Then go to the below link and re-install the Drivers again.
    Hope it helps and please update if you need further assistance.
    http://www.nvidia.com/Download/index.aspx?lang=en-us
    Regards,
    Vinay

  • Mac Photoshop CS6 crash with NVIDIA GTX470 graphics card

    Hi there,
    I don't know whether this is an Adobe bug or NVIDIA driver problem.
    I've recently upgraded my Mac Pro's graphics card from an Asus 256MB 8400GS to a 1GB NVIDIA GeForce GTX 470. Everything seems to work fine in CS6 suite apart from a weird anomaly where, dragging the 'Depth of Field' slider on a Photoshop 3D layer, Photoshop crashes. All of the other 3D controls appear to work fine, just the 'Depth of Field' causes the crash.
    I've tried disabling 'Open CL' and using the lowest settings, but I still get the crash. When I reinstalled the less powerful Asus card, I didn't get a crash and could use the slider fine. Would this be an NVIDIA driver issue, or Adobe bug with NVIDIA GTX cards?
    Thanks in advance :-)

    Thanks for both replies. I've sent an email to EVGA (who make the card) and I'll see what they say. Seeing as PS worked with my previous card, I guess you're right about it being a driver issue.

  • Apple 27'' Cinema display issue with nvidia quadro 1800 - Win 7 64bit

    Hello,
    I'm trying to help out a buddy of mine with his cinema monitor.
    He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
    Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
    I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
    The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
    What am I missing? 
    Thanks!

    Hello,
    I'm trying to help out a buddy of mine with his cinema monitor.
    He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
    Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
    I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
    The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
    What am I missing? 
    Thanks!

  • November 2007 Mac Pro with NVIDIA Quadro 5600 Win only

    Hi,
    so I have a NVIDIA quadro 5600 graphics card (PNY model) from another machine and want to use it with my late 2007 Mac Pro since my ATI XT1900 is slowly dying, has some temperature issues.
    I am only gonna use this machine for Windows and I am aware that the card won't work in MAC OS but I thought it should work just fine otherwise.
    So I installed the card and connected a second PCI Express 6 pin power cable (in addition to the one that was there from my ATI card) from the mainboard (so from the unoccupied 6-pin connector next to the other one) to the card.
    When I was switching on the machine, a buzzer sounds and apparently it means not enough power:
    http://www3.pny.com/QuadroPDFs/5600PowerRequirements.pdf
    so I thought there is something wrong with the mainboard 6-pin power connectors and used a molex y-adapter to directly connect the card to the power supply but with the same effect.
    Next thing I tried to connect an external 200W power supply directly to the card, guessing that the MAC's power supply won't be enough (which it should...think 900W?) but still getting the buzzer sound.
    Anyone tried this setup before or has some hints to how to resolve this issue?
    If not, I guess I have to sell the card and look for an alternative - which card would be compatible for Windows use in my MAC Pro?
    thank you all in advance,
    Johannes Kohnle

    I would concur, XP/Vista firmware reads two versions and most PC graphic cards have two versions embedded.
    So hopefully with Mac's technical experience they should be able to do what Microsoft have been doing for years.
    This is a well covered subject, we are all expecting something soon. Mr jobs told us so.
    The reality is I guess, do Apple want to do it?
    History dictates that they are not exactly ones for making Mac's upgradeable.
    I too and I expect many others will seriously consider whether to upgrading again if the 8800GT for the Mac Pro 2006 /7 never materialises, mind you we could always place a pillow on it and use it as a seat.

Maybe you are looking for

  • HP Officejet Pro 8600 e-All-in-One Printer - N911a printer assistant

    Hi!  So, I replaced an HP Officejet Pro 8600 e-All-in-One Plus with an HP Officejet Pro 8600 e-All-in-One Printer - N911. Subsequently the HP Printer Assistant desktop shortcut disappeared from my computer --  and apparently from the computer entirel

  • How do I perform a screen capture to print or save?

    How do I perform a screen capture to print or save?

  • Best practices to design OWB Process Flows

    Hi All, I am using OWB to develop historical data warehouse. For this I have created few mappings that load data from source tables to staging tables and then from staging to target tables. Now I am designing process flows to execute these mappings.

  • OS X Lion

    Hi there i just got this MacBook Pro second hand from someone... i formated it and it needed install OS X Lion so i bought that. it says that it will take from 1 to 3 days and Apple will sent it from E-Mail so i checked my email and only got an E-Mai

  • Anyone having trouble with Photoshop CS6 with Intuos3?

    I've been using CS6 since just after the Beta was released and I like many of the new features. I would probably love the software if not for one huge problem I'm having... no pressure sensitivity with my Intuos3. My Intuos3 works fine with CS2 and C