Update on Windows 7 Support in TVSU

I read all 51 pages of the diatribes on TVSU and did see that the forum moderators closed the thread (appropriate decision, I might add). 
I would just like to hear if things are still on schedule to release an update to TVSU that will enable support for Windows 7?  I have upgraded my T61P to Windows 7 Ultimate (the real RTM version, NOT any of the beta or RC versions) and most everything is working following an upgrade type of installation from Vista Ultimate SP2.  Very pleased so far, so I just wanted to check in since it is now "mid-August" to see if there is any additional insight into the TVSU release dates.
Thanks!
Toby Pennycuff
Dallas, TX

Hi,
yes there will be a release of TVSU, that will be fully Win7 compatible. 
However we need to have it fully tested before we release it. So I can not confirm the date as it might change a bit. 
Rgrds

Similar Messages

  • Control beats audio settings is not working after i update my windows 8 to windows 8.1

    i dont know what just happen after i update my windows. hp support software also not working. hardly i found nvidia driver as well.. Please help me asap.
    Notebook Model =   HP ENVY 15 - j039tx
    Thanks 
    Tahir

    anyone here!!! who can help me??

  • TS3212 Where is the support or updates for Windows 8??????????????????????

    Where is the support or updates for Windows 8??????????????????????

    What "support" or "updates" are you looking for? If you're having problems, perhaps if you post details, someone here can help you sort things out.
    Regards.

  • Nokia Software Updater Windows 7 Support?

    iI was using nokia software updater till Nokia has published a new update for the updater and Wnidows 7 is not supported. Where is Nokia windows 7 support???? I used it with my windows 7 what about now?
    Message Edited by incay13 on 21-Oct-2009 11:14 AM

    Yeah, but did you try to install it the normal way by either click run or just downloade and run the installer?
    These posts are from the time where NSU didn't have W7 support.
    If you haven't tried that, uninstall and install again.

  • System Update Problems - Windows XP 64bit with SP2

    Hi,
    I have been Googling away but can't seem to fix my error when running System Update 3.14 on Windows XP 64bit with SP2. I keep getting the following error at 9-10%:
    "An error occurred while gathering user information"
    Has anyone managed to get this working on this OS?
    I have tried uninstalling and reinstalling and also uninstalling .NET 3.5 but nothing has worked.
    Thanks.

    Hi,
    x64 Bit XP is not supported by TVSU, so I really doubt, that there is an official fix for this one.
    Cheers

  • Failure(s) to install a particular update for Windows 7

    Several times now, I've tried to use Windows update, but it keeps failing... giving the error code:
      "WindowsUpdate_80070103" "WindowsUpdate_dt000"
    I've searched the Windows website for an appropriate and useful answer, but so far I haven't found an appropriate answer :-(
     Windows help just gives the result:
        0 results for "WindowsUpdate_80070103" "WindowsUpdate_dt000"
    What's going on, and why I can't find an answer to this problem, I have no idea at all.
    This has been going on for several weeks now.
    So unfortunately, I'm now "forced" to ignore this so-called "important" update option :-(

    Hi,
    What exact Windows Update did you install? Have you tried to install it manually?
    Meanwhile, please follow this guide to reset the Windows Update component:
    How do I reset Windows Update components?
    http://support.microsoft.com/kb/971058/en-us
    Karen Hu
    TechNet Community Support

  • After updating to windows 8.1 the games I played wont start

    Good day,
    Im new to this stuff, i recently updated my windows 8 to 8.1. After updating the game that i was playing works just fine. After a few minutes an update was done on something(i dont know what that was) Then I closed the game becuase it froze or something.
    then when i open it again, it says " Rome: Total War failed to find DirectX 9, which is required for the game to run. Please reinstall directx"
    After that I tried to open another game that i was playing (The Asian Dynasties:Age of empire 3). A window pops up and says
    "Age of Empires III requires at least a 64 MB video card. This computer appears to have a 0 MB video card. If you wish to upgrade your computer, please contact your computer manufacturer for any necessary assistance.
    System information: 1900 MHz, 3968 MB, 0 MB  (vendorID 8086, deviceID 166)"
    There where two choices buttons in the window one says "attempt to run" and the other says "exit game"
     So i selected attempt to run then it says that "Initialization failed. Direct 3d initialization failed" and there list of possible causes to it.
    These two games work perfectly fine before i updated my laptop to windows 8.1. I tried measures to correct the problem on Rome total war like installing a directx package which it said to have installed previous versions of directx's but the game wont still
    work. i also tried troubleshooting it all it does is change its compatibility then it still says that directx 9 is missing. i read more furoms but i cant find a right answer.
    please help,
    JC

    Hi,
    In your situation, I think you should make sure that you have the latest version of the Age of Empires III software, just as the article talks about:
    http://support.microsoft.com/kb/907881
    Besides, after upgrade to Windows 8.1, I suggest to upgrade the graphic card driver accordingly from the official site of graphic card manufacturer. Meanwhile, download the DirectX End-User Runtime Web Installer(also for Windows 8.1) from the site below:
    http://www.microsoft.com/en-us/download/details.aspx?id=35
    The Microsoft DirectX® End-User Runtime provides updates to 9.0c and previous versions of DirectX — the core Windows® technology that drives high-speed multimedia and games on the PC.
    Regards
    Wade Liu
    TechNet Community Support

  • After updating to Windows 8.1 the Webcam in my Inspiron is gone and Imaging devices missing in Device Manager

    my webcam in my Dell Inspiron 3521 was working fine with Windows 8.  After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is  missing in the Device Manager.  how can I get the Webcam back? 
    thank you very much.

    I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
    http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
    The Dell Update utility will recommend drivers that are needed specific to your model.
    http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
    Good luck!
    bill
    Regards, Bill Moore @BMooreAtDell

  • After updating to windows 8.1

    I updated my notebook to windows 8.1 then my internet is not working any more on the notebook .. ichecked my router and found it working well without any problems and working on other pc's .. and i found a message in hp support assistant that after the update to windows 8.1 imay face some problems such as losing internet connectivity and i dont know how to rework it again .. Any help please .. thanks

    Hi @yehia741 ,
    Welcome to the HP Support Community! I hope you enjoy your experience with us.
    I saw your post regarding the problems with your wireless connection after upgrading to Windows 8.1. I will be happy to help you solve this. Let me start by getting some additional information from you; What is your product number? What do you have listed in your Device Manager under Network Adapters?
    You can also try the troubleshooting steps listed in this HP document Troubleshooting Wireless Network and Internet, which includes using the built-in Windows Troubleshooter.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently

    After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently .I am unable to predict the frequency or time
    period this is occurring.But now i am really struggling to use the internet.I have tried my laptop vendor support and Microsoft support both failed to provide a solution.Please help me to resolve.I have installed the Wifi driver from real tek site many times
    ,but that is not helping.kindly provide me the guidance.
    when i searched in internet i am able to see many people are struggling with this same issue .

    Hi, 
    You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results. Other suggestions can also be used to troubleshoot your issue.
    Windows 8.1 Wifi showing "limited" or "No Internet Access"
    http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
    Meanwhile, please check with the manufacturer of your router to update the firmware.
    If the issue persists, please help to collect following information for further research: 
    1)            Enable RAS Tracing on the client. 
    -              Over an Administrative command prompt. 
    -              C:\> netsh ras set tracing * enabled
    2)            On the client enable the following log as well:
    -              Over an Administrative command prompt. 
    -              C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
    3)            Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
    4)            Disable RAS Tracing on the client. 
    -              Over an Administrative command prompt. 
    -              C:\> netsh ras set tracing * disabled
    5)            On the client disable the following log as well:
    -              Over an Administrative command prompt. 
    -              C:\> netsh trace stop
    6)            Please provide the following files:
    From the Client:
    a)            ZIP folder of C:\Windows\Tracing
    b)            C:\Net.etl and C:\Net.cab
    Upload these files in SkyDrive and post back the shared link. 
    Keep post.
    Kate Li
    TechNet Community Support

  • Internet browsers do not work after updating to Windows 8.1.

    I have spent several hours researching my issue, performing fixes that have worked for others, but to no avail. I have talked with 3rd party tech supports, in addition to Microsoft tech support. I also recently spent 3 hours under remote access with a helpdesk
    employee. To no avail.
    My issue:
    Recently updated to Windows 8.1. Immediately following, none of my browsers work. Internet Explorer is entirely out of commission. Firefox and Chrome, however, interestingly, are able to open simple google pages: gmail, google maps, google search - I can
    even search things that I want and results will show up... they just will not load if I click on them. The error message when I click on "More" says something along the lines of "maybe it's your firewall or antivirus wrongly detecting Chrome...",
    and I think maybe something similar for Firefox. Explorer simply says that it cannot display the page.
    So, how am I writing this? I am currently booted up in Safe Mode, with networking. Apparently it works here, which I'm hoping indicates that the issue to resolvable.
    Remedies I have attempted:
    I have restarted my computer over 60 times in the past 2 days.
    I have troubleshooted the internet connection via the button that says "troubleshoot". It says it cannot identify the problem.
    I have executed various command prompts executed as administrator: i.e. netsh winsock refresh, advfirewall refresh, something to do with ipv4, ipv6, a bunch of "IP stack resets", etc, etc.
    I have manually added chrome, firefox, and explorer to my firewall exceptions, both via McAfee and via the Windows firewall system. Both simultaneously, one at a time, etc, every combination of this.
    I have uninstalled the web browsers and reinstalled them.
    I have unintalled my antivirus and reinstalled it, and checked in between.
    I have turned my firewall off.
    I have manually inputted some kind of DNS address (8.8.8.8 and 8.8.4.4) and/or IP address (forget exactly what was asked of me to input).
    I have gone to my "Manage Devices" and updated all of my network drivers, and attempted to revert to old versions of drivers.
    There are probably more things that I have tried, I just don't remember exactly and cannot list them. Most things you can find on Google pertaining to this issue, I've tried.
    Is there anything at all that anyone can think of to fix this situation? I am about ready to refresh my computer/do a systems restore/whatever to erase everything, factory reset, even (hopefully it works, because I've read that some people have issue, i.e.
    no previous partition found or something, or no recovery media present, etc, etc).
    Before I resign to this, PLEASE FOR THE LOVE OF GOD HELP ME.
    Also, may I please note here that given the sheer frequency of this issue around the web that I've found, I think it is absolutely ridiculous and irresponsible of Microsoft not to rectify the issue. This is even 3+ months following the release of the
    update; I always lag on updating such that bugs like these are fixed before I get on the train. This update has essentially reduced my multi-hundred dollar computer to an infantile calculator/solitaire/checkers/Microsoft office LCD screen. Not to mention wasted
    2 full days of my time. 
    Sorry, just saw red there at the end and had to vent my anger. Please help.

    Hi,
    I can imagine the inconvenience you have experienced. I will try to help you in fixing the issue.
    Please test this issue in the Clean Boot environment to check if there is some conflicts with network.
    If the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
    How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
    http://support.microsoft.com/kb/929135
    Also, to find where your problem is, I suggest you use Network Monitor tool to capture a network package:
    http://www.microsoft.com/en-in/download/details.aspx?id=4865
    Then, please upload the package here for further research.
    Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing, privacy, and collaboration:
    http://skydrive.com
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Windows Intune support deployment for windows phone (8.1) *.appx files

    Hi
    We are trying to deploy a windows phone 8.1 appx file with intune (over sccm console). the appx file is signed with a valid symantec certificate.
    the installation of the app fails, either when we upload the file as "Required" (so pushing it automatically to the devices) or when we make the app on the company portal app available. 
    in the sccm console the deployment status says failed -> unkonwn error.
    when we use .xap file of an windows 8.0 app, it works like a charm and the xap file is signed with the same certificate.
    My question is, is there no support for publishing windows phone 8.1 appx files on Intune? Or what can it be?
    Thanks for any hints

    UPDATE
    According to these links and the comments from Mitch Denny, can somebody confirm that .appx files (company apps) cannot be deployed/installed on windows phone 8.1 yet?
    http://blogs.technet.com/b/windowsintune/archive/2014/05/12/what-s-coming-next-with-windows-intune.aspx
    http://blogs.technet.com/b/windowsintune/archive/2014/04/28/availability-of-update-to-windows-intune-for-windows-phone-8-1-and-samsung-knox-standard.aspx
    I would really appreciate if someone can confirm me this, because im struggling with this since days and there is no official statement from MS.
    Thanks

  • Microsoft all ready has an update for Windows Phone 8.1 Verizon customers still don't have WP 8.1. UGH!

    Microsoft has all ready released an update to Windows Phone 8.1. Us Verizon customers don't even have WP 8.1. *** Verizon?  My contract with Verizon is up in November this is the tipping point.  I am not going to renew my contract.  I will just buy the phone out right and sign up for Straight Talk.  Then I don't need to have the "Nanny service provider (Verizon)" telling me when I am able to obtain a device update.  Thanks for nothing Verizon.

    On one side, I can understand that maybe (and that's a BIG maybe) Verizon wants to make sure they have enough data (pardon the pun) regarding the successful adaptation of the update for it's customers in order to make sure everything goes smoothly.  However, I find that Verizon likes to keep customers in the dark regarding time frames.  It's interesting to see on some of the similar titles message boards entries on this topic have Verizon monitors ready to wipe out entries if they violate terms of service on the forums.  But, when asked directly about time frames for Windows updates, you either get a link to some Verizon news page (which is of no help), or nothing at all.  A number of people called Verizon customer service and get varied answers like: "Sometime this summer", "Soon", or even an "I don't know, they don't even tell us either"...which is the answer I got one time.  Very discouraging.  I had a choice between the Windows Phone, or a Samsung Galaxy phone.  I chose Windows because of it's features.  Beginning to regret it now, since support for it on Verizon appears to be dismal at best.   

  • Error code 2343 when trying to install update on windows 7

    When trying to install the updates to Itunes get this error message. Have tried the downloads direct method, turning off the firewall with same result.
    How can I get it to accept the update

    Hello Mota21,
    Welcome to Apple Support Communities.
    Try following along with the troubleshooting suggestions in the article linked below, they should help you resolve the issue installing the latest version of iTunes on your PC.
    Issues installing iTunes for Windows - Apple Support
    Cheers,
    -Jason

  • My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

    My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

    Work through all the suggestions in this Apple support document first.
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

Maybe you are looking for

  • Enable / Disable a Step in GAF

    I have an application with 4 steps. In the step 1 I want to disable the step 3 and 4. How do I do that? I use GAF in FPM for the web dynpro application. Thanks!

  • Embedded Youtube videos not working on Chrome 23 / Flash player 11.5.31.2

    For the past couple of weeks, I've not been able to play any Youtube videos that appear as embedded videos on other websites.  The small player appears with the still frame from the video and all the controls, but on pressing play, the video goes bla

  • Database moved to different machine

    Hello all, I have built an xMII application that connects to a SQL database. This SQL database that xMII currently accesses has now been moved to a different machine. What are the changes that I have make in xMII to refer to this new location? Do I o

  • Why macbook can't upgrade to mountain lion

    i was wating for this upgrade since you guys anounce it and today that i woke up expecting it to b in store already well guess what i tried to buy it but it keeps appearing a box saying sorry but this upgrade OS X MOUNTAIN LION is not compatible with

  • Customizing the Sharepoint 2013 inbuilt "SearchResult" webpart

      Acutally am working on the requirement,where i need to display the search results using Sharepoint 2013 inbuilt "SearchResult" webpart and where the results can be filtered by placing refining control in other Refiniment webpart in the same page. h