Update rules for 0PU_C02

I am working on the Funds Management and the Standard Business content cube 0PU_C02, which pulls the data from 7 ODSs through the Update rules. The update rules does not have characteristics fields that needs to passed on to the cube, but it has the Key figure fields (0Amount) to pull. However, On looking in the Infocube content, the data are availble for the Characteristics field along with the expected Key Figure value.
How is this situation possible, where we are getting the data (in the infocube) for the characteristics, which does not have any field specified in the Update rules. I checked other update rules too for getting to the bottom of this.
Thanks

Hi Saura,
In the update rules screen, click on an update rule for the key figure (in column Ty.) In the screen that opens up you should be able to see update rules for the chars on the char tab.
Hope this helps...

Similar Messages

  • Error when activating update rules for R/3 training and event management

    hi all,
    when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
    Message no. RSAU461".
    please guide me how to solve this issue.
    thanks & regards
    Vamshi D Krishna

    Hi Vamsi,
    Have you followed the following document to implement HR ?
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

  • Error while maintaining the Update Rules for the Infostructure

    Hi,
    I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
    Please guide me in resolving the issue.
    Thanks & Regards,
    Kumar.

    Hi,
    This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
    Solution provider for this will be rewarded with good points.
    Regards,
    Kumar.

  • Add update rule for new key figure in one info struc

    Hi, everyone
    I would like to know how to add update rule for new key figure in one info struc.
    Thanks ahead.
    Eric

    1)I have created the update rule for one info structure
    2)add one key figure in the info structure due to business requirement
    3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
    Can anybody tell me how to do with it?
    Any answer will be appriciated.

  • Missing Update Rules for 0IC_C03 in Business Content

    We had a problem with 0IC_C03,  so we decided to reload from Business Content and then migrate to 7.0 format again.
    However, when we try to gather all of the dependent objects for the InfoCube in Business Content, we only get one set of obsolete update rules (2LIS_40_S278), and the update rules for 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM do not show up.  They do not appear under update rules, either.
    I know they were there at one point because I activated and migrated the cube once already.
    Can someone help us find our lost update rules?

    Hi Dan,
    There are no update rules deliverd with BI 7.0 for 0IC_C03. There are only
    transformations Delivered as part of the content. In the new release
    Transformation replace the update rules and the transfer rules.                                                                               
    You have the 3 data sources and the associated transformations to  
    upload data to the infoCube.                                                                               
    Transformations installed                                          
    TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_BX_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_UM_TR -> CUBE 0IC_C03                                                                               
    DataSources installed                                             
    2LIS_03_BF                                                        
    2LIS_03_UM                                                        
    2LIS_03_BX

  • Error while installing 2LIS_03_BX update rules for 0IC_C03

    Dear experts,
    when i am trying to install the standard business content
    update rule for 0IC_C03 for the datasource 2LIS_03_BX,
    it throws me a error stating
    "Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found"
    I need the cause and solution for this error.
    With regards,
    Meiyappan

    Please choose to install the Update Rule between InfoSource 2LIS_03_BX to InfoCube 0IC_C03.
    You have probably not selected to install the Update Rule which is throwing an error.
    While Installing, after choosing the required Objects, please also change the Display to "List" to be able to view all objects clearly.
    Regards
    Anujit Ghosh

  • BW 3.5 update rules for master data

    Hi all,
             I create a dummy report in that report lifnr is charactics and name its att. after  this i create a application component and assign data source and create infopkg   data coming in lifnr and name field properly <b>i assign data source using direct master data update</b> after this i create infocube and assign dim.
    but when i rgt click on infocube and display dataflow it shows only one level and when i open bex and open that it shows no application data found why this happened after creating infocube it is nessory that i creat update rule for this am i right plz send your openion.
    thx

    Hi Ankit,
                  Yoy have to load data to the cube.For that you need update rules.
    Steps to load data to the cube
    1.Replicate the datasource.
    2.Assign Infosource
    3.Create transfer rules
    4.Maintain the update rules to the cube.
    5.Right click on the datasource and schedule an infopackage for it.
    Execute the Infopackage and pull the data to the cube.
    Hope this helps
    Regards
    Karthik

  • Update rule for COSTCENTER master data

    Hello All,
    Cost Center is not an attribute of 0EMPLOYEE, neither a field provided by the table PERSON.
    0COSTCENTER gets data from the MASTER Datasource 0COSTCENTER_ATTR. When writing an update rule for this characteristic, what code should be written?
    and Which fields should be considered from the table /BI0/MCOSTCENTER.
    Thanks in advance.
    Regards,
    KP

    Hello,
    Lets consider a ZINF infoObject with time dependent attribute as ZDEPART.
    When writing an update rule, I do a lookup on ZINF. Do  I have to write a code for this llokup (mapping this infoObject)?
    After writing a code for a lookup on ZINF, will this InfoObject be available for selection in "Master data attribute of"?
    Kindly reply.
    Regards,
    KP

  • RSAU461, problem with activating update rules for cube 0csrv_c01

    Hello,
    I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
    What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
    Regards
    Radek

    hi
    As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
    double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
    Khaja

  • Update rule for cube 0PY_C02

    Hi ,
    Please let me know the update rule for cube 0PY_C02 as I am not able to locate it in the Business content data flow or meta data repository.
    thanks

    Hi,
    Check the output in the transaction LISTCUBE it will give you better picture of the data coming in the multicube.
    Check whether the char in the rows of the report is coming from one of the cube only and the key figure which you are looking is coming from different cube.
    Also check for the selections on the report if the selection variable is on a char having identification from only of the cube.
    this can cause the filtering of data from one of the cube and you will get all the value as # for that particular field.
    Take DESG characterstic into the cube 0PY_C02 also.in the update rule(of cube) for this Infoobject take Master data lookup concept.
    Make the Identification mapping for the IO DESG of Multiprovider iwth the chacterstic DESG of both cubes .
    Then activate the Master data 0Emlyoee_ATTR.
    Reupload the data into 0PY_C02.
    Hareesh

  • Program to activate update rule for master data (info objects)..very urgent

    Hi all,
    I have an info provider(A0CUSTOMN). For this the update rules are not active.In production system i am not able activate.Please let me know if there is any program to activate the update rule for masterdata(info object).
    Thanks=points
    Manjula

    Hi Manjula,
    Leave the id and infocube field blank.  Just provide the infosource name.
    BTW is this a direct update master data object?  In that case all this is not relevant.
    Check if it appears as an Infoprovider. 
    I did not ask enough questions to start with.
    BR/
    Mathew.

  • Can routine replace "master data attribute of" update rule for performance?

    Hi all,
    We are working on CRM-BW data modeling, We have to look up agent master data for agent level and position for each transaction data. So now we are using "Master data attribute of" update rule. Can we use routine instead of "Master data Attribute of" ? Will it improve the loading performance? Since we have to load 1 lack transaction records , where as we have 20,000 agent details in agent master data.My understanding is, for each record in data package the system has to go to master data table and bring the agent details & store in cubes. Say one agent created 10 transactions, then this option "master data attribute of" will read the agent master data 10 times even though we are going to pull same details for all 10 transactions from master data. if we use routine, we can pull the agent details& storing in internal table removing all duplicates and in update routine we can read the internal table.
    Will this way improve performance?
    let me know if you need further info?
    Thanks in advance.
    Arun Thangaraj

    Hi,
    your thinking is absolutely right!
    I don't recommend to use the standard attribute derivation since it will perform a SELECT to the database for EACH record.
    Better implement a sorted table in your start routine; fill it with SELECT <fields> FROM <master_data_table> FOR ALL ENTRIES OF datapak WHERE OBJVERS = 'A' etc...
    In your routine perform a READ itab ... BINARY SEARCH.... I believe that you won't be able to go faster...
    hope this helps...
    Olivier.

  • Currency conversion error in Update rules for 0SD_C03

    Hi All
    I have freshly installed Sales Overview cube 0SD_C03 from BI Content(3.x version) and when extracting data from datasource "2LIS_13_VDITM" there is an error "Error: Conversion foreign curr. -> local curr.: 0090000000 20080516 M -> SGD".
    Till PSA data is loading fine, there is error while loading from PSA to cube(ie. in Update Rule).
    Checked in the PSA for the errored records, all the records which have 0(zero) as amount are green and the rest of them are errored with the above message.
    When checked in the manage cube there are added records but the request is red.
    Please let me know if some one as the clue.
    Regards
    Jayant

    Hi
    You will find the transfer global settings for the source system where you are extracting the data.
    Select the source sytem, right click,go to transfer gloabal settings, (select the currencies in this)
    Then Reload the data into the cube,
    After, Reloading the data into the cube replicate the master data, and activate the mappings,and load the data.
    I think, this will work....
    Regards
    Sudheer

  • Update rules for infocube

    hi all,
    i am new to SAP BIW. i am trying to extract transaction data. i have assigned my data source to a certain structure in SAP DR3 500 client. this structure is also replicated in the source sysytems of the BW client. however, when i go to create update rules, it asks me for an infosource. then when i give my data source as my entry, it says that 'the name of my data source is not maintained.
    can you please suggest how to maintain an infosource in such a case???
    regards,
    kaustubh

    Hi Kabre,
    i think u know that the steps to be followed?
    please follow this steps:
    1) replicate the data source( in ur case, replication is already done)
    2) create application component and create infosource under application component and give your infoobjects and activate your communication structure.
    select infosource 3.x, if you are using older versions
    3) right click on infosource, create transfer rules in that map the objects and activate transfer rules.
    if you want to write transfer routine for a particular info object, you write accordingly.
    4)go to ur datatarget(ODS or Infocube) rightclick you will find additional functions, create update rules.
    there you can create ur update rules and activate
    Thanks & Regards
    Swathi

  • Update Rules for 0SD_C03

    Hi,
    There are 6 KF in 0SD_C03 infocube which comes from update rules with routines e.g. "Subtotal 1 from Pricing Procedure in Statistics Currency". I cannot understand what the routine brings. anyone have an idea?
    Thanks,
    <b>the routine is:</b>
      DATA: VALUE LIKE COMM_STRUCTURE-NET_VALUE.
      DATA: US_RATE_TYPE LIKE COMM_STRUCTURE-RATE_TYPE.
      CLEAR RESULT.
      IF NOT COMM_STRUCTURE-SUBTOTAL_1 IS INITIAL AND
         COMM_STRUCTURE-DOC_CURRCY NE COMM_STRUCTURE-STAT_CURR.
        US_RATE_TYPE = COMM_STRUCTURE-RATE_TYPE.
        IF US_RATE_TYPE EQ SPACE.
          US_RATE_TYPE = 'M'.
        ENDIF.
      ENDIF.
      IF COMM_STRUCTURE-DOC_CURRCY NE COMM_STRUCTURE-STAT_CURR.
        CALL FUNCTION 'CONVERT_TO_STAT_CURRENCY'
             EXPORTING
                  DATE                 = COMM_STRUCTURE-ST_UP_DTE
                  DOCUMENT_AMOUNT      = COMM_STRUCTURE-SUBTOTAL_1
                  DOCUMENT_CURRENCY    = COMM_STRUCTURE-DOC_CURRCY
                  LOCAL_CURRENCY       = COMM_STRUCTURE-LOC_CURRCY
                  STAT_CURRENCY        = COMM_STRUCTURE-STAT_CURR
                  LOCAL_RATE           = COMM_STRUCTURE-EXCHG_RATE
                  STAT_RATE            = COMM_STRUCTURE-EXCHG_STAT
                  LOCAL_TYPE_OF_RATE   = US_RATE_TYPE
                  STAT_TYPE_OF_RATE    = US_RATE_TYPE
             IMPORTING
                  STATISTICAL_AMOUNT   = VALUE
             EXCEPTIONS
                  LOCAL_RATE_NOT_FOUND = 1
                  STAT_RATE_NOT_FOUND  = 2.
        CASE SY-SUBRC.
          WHEN 0.
            RESULT = VALUE.
            RETURNCODE = 0.
          WHEN 1.
            CLEAR MONITOR.
            MONITOR-msgno = '005'.
            MONITOR-msgid = 'SDBW'.
            MONITOR-msgty = c_msgty_e.
            MONITOR-msgv1 = COMM_STRUCTURE-DOC_NUMBER.
            MONITOR-msgv2 = COMM_STRUCTURE-ST_UP_DTE.
            MONITOR-msgv3 = COMM_STRUCTURE-DOC_CURRCY.
            MONITOR-msgv4 = COMM_STRUCTURE-LOC_CURRCY.
            append MONITOR.
            RETURNCODE = 4.
          WHEN 2.
            CLEAR MONITOR.
            MONITOR-msgno = '006'.
            MONITOR-msgid = 'SDBW'.
            MONITOR-msgty = c_msgty_e.
            MONITOR-msgv1 = COMM_STRUCTURE-DOC_NUMBER.
            MONITOR-msgv2 = COMM_STRUCTURE-ST_UP_DTE.
            MONITOR-msgv3 = COMM_STRUCTURE-DOC_CURRCY.
            MONITOR-msgv4 = COMM_STRUCTURE-STAT_CURR.
            append MONITOR.
            RETURNCODE = 4.
        ENDCASE.
      ELSE.
        RESULT = COMM_STRUCTURE-SUBTOTAL_1.
      ENDIF.
      IF COMM_STRUCTURE-DOC_CATEG CA DEB_CRED.
        RESULT = RESULT * ( -1 ).
      ENDIF.

    Is the question what are the subttoal 1-6 or what does the routine do?
    Sub totals 1-6 are user defined fields in the SD pricing block - if the SD consultants haven't already used them for their purposes it is a good idea to use them to denote surcharges etc that you want in BW (without having to use the condition extractors or user exits to get the sales order breakdown)
    What does the routine do?
    Exchange rate conversion then multiple by -1 if it is a credit note (or similar)

Maybe you are looking for

  • [SOLVED] Something's wrong with my start menu..

    Hey, Suddenly, with no apparent reason, though after a pacman -Syu, I lost most entries in my KDE kickoff start menu (I am using the package kdemod-kdebase-kickoff). For example: Although openoffice and firefox are still installed on my computer, I c

  • SAP Netweaver gateway in solution manager

    Hi , We have a solution manager 7.1(netweaver 7.02) and ECC IDES EHP 6 system for which we need to configure Netweaver gateway. We have installed netweaver gateway 2.0 components in solution manager system. Now is it possible to configure gateway on

  • How to Manage Archive Files in Oracle 10g

    Dear all I have 10g Database server running in Archive Mode, there are huge number of archive files have been increased , (1) how can i find old and obsoleted Archive files that will not be needed for recovery in future.so that i can delete them inor

  • Cannot open the team project page under browse

    Hi After I create a team project in DefaultCollection, then I modify the name of the collection, which are all successful. I open http://localhost:8080/tfs/ under Browse, I click the team project name, an error page is displayed: "Error The page you

  • HT4097 my i-pad fall and and it stopped working right away! what should i do? please help if u can

    my i-pad fall and and it stopped working right away! what should i do? please help if u can