Update rules infocube 0py_c02 not found BI 7.0

Hello Forum,
By activating the infocube standard payroll (0PY_C02), I found the problem that the rules for updating the infocube not exist and neither are activated in the BI content version 7.0. I have written a note to Sap, and I say it is not a mistake that the rules in version 7.0 will have to manually create. But of course, I have a doubt. There are features and ratios that are calculated using ABAP and routines are not fed directly from the data source, therefore not as cargo and where can I get the code. Someone has an idea?
Thank you.

My mistake, I hadn't selected my system to view the metadata.  I also deleted the original source system client and will re-start the replication and migration with the new client

Similar Messages

  • Update Rules inactive-Log not found in main memory

    Hi
    I am trying to active update rules but it is failing with log not found in main memory. 
    I tried  update rules syntax check and system says no error when checking the update rules.
    What could the reason? How can I dig this further? Please advise ASAP as this is urgent.
    Regards
    Vennela

    Check out if there has been any update error in VA02 using transaction SM13.
    Lokesh

  • Log - hostapd trying to update accounting statistics, station not found , ] trying to deauthenticate to station, but not authenticated

    I am seeing log entries and want to see is security problem.
     Log Message from AP xxx.xxx.xxx.xxx
    TIME                Priority  Process Id                Message 
    Sep 18 2014 11:0       3        hostapd[941]            trying to update accounting statistics, station not found
    Sep 18 2014 11:0       3        hostapd[941]            trying to deauthenticate to station but not authenticated 

    Hi mbalbuena
    you are not mentioning what kind of authentication (WPA-Enterprise, WPA-PSK,..) are you using for your wifi network. That could be related to RADIUS accounting feature (in case of WPA-Enterprise with RADIUS accounting enabled/checked) but I am not sure.
    But nevertheless of that I hope this is just information that:
    Some client wanted to authenticate to your network, but it fails. This resulted to explicit deauthentication of that client by your WAP (regardless of fact if client was really authenticated or not at beginning). Forced deauthentication makes sense for example in case, that client was successfully connected to your Wifi, but it fails to reauthenticate (yes, every client is challenged to reauthenticate regularly after defined period of time) for some reason - in this case forced deauthentication ensures that user will get kicked off from your Wifi network. That's my explanation of second Log line.
    First line is just triggered action resulted "deauthentication" process - i.e. gather accounting statistics of that client. But in your case it fails, because that client was never really connected to your Wifi network and thus there are no records in statistics table for him.

  • "Old" update rule from ODS not working

    Hi Gurus,
    I need to set up the "old" fashioned update rule to load data from an ODS1 to another ODS2.
    The thing is that I need to set up an update rule because I need to implement a Return Table Routine that is not supported (as far as I know) by the new Transformation/DTP.
    When I select option (through the right mouse click over ODS1)  "Other Options" - "Create Update Rule" it takes me out of the RSA1 and leaves me in the main menu making it impossible to create a new update rule.
    The strange thing is that I have this working from and ODS to an InfoCube.....
    Suggestions, a workaround??
    Andrea.

    Hi Jerry,
    Just to confirm that this is not working. The tys_TG_1 structure only shows me the target infoprovider structure. Check that in the how to, to be able to derive employee first you need to assign eache source_filed to the result_field leaving employee blank.
    I need to have in the same place, the source_field structure (source infoprovider field structure) and the result_field structure (target infoprovider structure). That is what the "old" return table gives me as in the same place I can have the communication_structure (source infoprovider field structure) with the return_table structure (target infoprovider structure). 
    Just to understand, in the source infoprovider I have 12 Key Figures (1 for each period) and I have to split each incoming record to 12 records. If I work only with the result_field structure tys_TG_1 and the result_package tyt_TG_1 I'm not able the see those 12 KF.
    So... return table functionality is not fully supported by BW 7 as far as I know.
    Any other ideas why I'm not able to create the old Update Rules from an ODS?
    Regards,
    Andrea.

  • Apple Software Update error- "Entry Point not found"

    I have had Apple Software Update/ iTunes on my PC for over 4 years. Today, randomly, when I went to update iTunes to the new 10.5 version, Software Update did not prompt me to update. That was odd, but I didn't realize anything was amiss yet at this point.
    In iTunes, I went Help > Check for Updates which indicated the new version was downloaded. When promted whether I'd like to update, I hit yes, which even more oddly took me to apple.com to download iTunes all over again. (Normally, updates download from within iTunes and it's an update, not a full hour-long re-download.)
    I didn't want to redownload iTunes (what would happen to all of my previously downloaded apps and music, set playlists?) so I opened Software Update, and got the following error message:
    SoftwareUpdate.exe - Entry Point Not Found
    The procedure entry point ?CreateProductsFromXML@CSUCatalogObject@@QAEXP6AIPAXIIJ@ZOIV?@CStringT@WV?$StrT raitMFC@WV?ChTraitsCRT@W@ATL@@@@@ATL@@@Z could not be located in the dynamic link library SoftwareUpdateFiles.dll
    Strange, right?
    So my questions.
    1.) Does anyone know why Apple Software Update would suddenly get errors? I've used it recently (this past weekend?) and everything was fine.
    2.) Is there a way to fix Software Update, since I'll surely need it in the future.
    3.) In the meantime, should I proceed with re-downloading the full version of iTunes again, and will it mess up anything I currently have in my iTunes library? Would I need to back it up or do anything to help ensure there are no further problems?
    Thanks for your help. To say I'm confused is an understatement!

    Well... after I posted this, some info from other posts came up and I found the answer!
    In case anyone has the same issue that runs across this... this worked for me perfectly.
    Correct Answer by Sposivo  on Aug 19, 2011 5:23 PM
    "Start, Control Panel, Add & Remove Programs, Apple Software Update, Change, Repair"  - this fixed it for me.
    See the answer in context

  • Business Rule Error: Fact not found in the rule engine working memory, rule

    I am trying to create a simple decision table with an input(ValidateInput) and a output(ValidateOutput). The input and output schemas have unbounded and nested elements(Parent-child relationship). When I create a condition(specific condition on input) and in the action I am asserting the output object. But when I run using EM it throws the following exception. It would be helpful if somebody could tell me what could be the problem. Please note when I set the output as ValidateInput object then it runs fine. Also it executes fine with ValidateOutput if it doesn't have unbounded(List) element inside it.
    Error Message: {http://xmlns.oracle.com/OracleRules10/OracleRules10_DecisionService_1}operationErroredFault
    Fault ID     rules:211
    Fault Time     Jun 18, 2011 10:45:13 AM
    Non Recoverable Business Fault :
    Fact not found in the rule engine working memory, rule session execution failed. The rule session 270013 failed because an instance of the fact com.example.customer.ValidateResponse could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. If the error persists, contact Oracle Support Services. 270013
    Edited by: reachsky on 18 Jun, 2011 9:57 AM

    It's working now..I had to use Global variable to declare child element of the output variable and use the same during action.

  • Can't update IPhoto because application not found?

    I have had the latest iPhoto until yesterday when I did something dumb? then I couldn't open iPhoto anymore. I did create a new library, but discovered that the version of iPhoto I can now open is only a 2. Whenever I try to update to iPhoto 5 or 6, the screen says "you cannot install iPhoto update on this volume. An eligible iPhoto application was not found in the location / Applications/iPhoto.app" when I try to install it onto the hard drive. I'm an amateur at this and would surely appreciate some help. I don't want to be stuck with a version 2! I would also like to be able to import all my pictures back.

    Hi lori,
    From the beginning: We just bought this intel two months ago. I believe it came equipped with the latest iLife and therefore the latest iPhoto. The technician at the store booted up everything from our old broken iBook, which had older versions of everything (though I don't think the iPhoto was THAT early of a version.)
    Recently, I set up a new user and I tried to copy (drag over) my old photo library from my iBook backup file, because this new user didn't have any pix on its iPhoto. When I tried to do that, I believe the computer asked me some questions, like I'm agreeing to certain terms of iPhoto. I thought this was required process under a new user. I really didn't pay attention to it and just clicked 'agree'. Then I couldn't open iPhoto anymore because it said I had done some changes to iPhoto and needed to reopen with a later version. I read some of your other posts and tried to create a new library, which I succeeded in doing. But now it's version 2. Really strange and frustrating.
    I'm assuming that the latest iLife is on my computer already? We don't think our computer came with the CD/DVDs.
    I SURE appreciate your help thus far! It's all new to me.

  • Update rule 0CFM_C11 0CFM_MARKET_RATES: not executable

    Hi BI friends
    We would like to activate the BI content for update rule 0CFM_C11 ->  0CFM_MARKET_RATES.
    After selecting this update rule in BI content area of RSA1 and simulating the installation we get errors:
    Chararacteristic 0CFM_AC_REF is available in version M but not in version D
    Chararacteristic 0CFM_BOOK_S is available in version M but not in version D
    Chararacteristic 0CFM_BT_CT is available in version M but not in version D
    Chararacteristic 0CFM_BT_ID is available in version M but not in version D
    Chararacteristic 0CFM_FLO_TP is available in version M but not in version D
    Chararacteristic 0CFM_FL_NR is available in version M but not in version D
    All of the mentioned characteristics are in a active version.
    Where is the problem for installing this business content? How can we fix it?
    thanks for your help!
    BEOplanet

    Hi Andreas
    I have tried your proposal no. 1 via RSA1: no success. I am getting the same error message:
    Regarding your proposal no. 2 via FM RSDG_IOBC_REORG: How should I set the fields after executing the FM?
    I_OBJVERS                       A
    I_PROGRESS                      R
    I_IOBJTP                        *
    I_ALL_IOBJ                      R
    I_T_IOBJNM                         0 Einträge
    I_BYPASS_BUFFER                 R
    Thanks
    BEOplanet

  • BIOS update for L50-B not found

    Hi there,
    I found out that there is a new BIOS update for my Satellite L50-B series but whenever i try to download the file it keeps coming with with 404 not found. Have toshiba pulled the update or something?
    I'm running Windows 8.1 64 bit.
    Thank you!

    You cannot download BIOS update if you don't know exact model part number. Part number is visible on the Toshiba sticker that you can find at the bottom side of your notebook.
    By the way is there some reason for BIOS update? Do you have some technical issue with your machine?
    I mean if everything is OK you must not change anything.

  • Update Rule in Q not active

    Hi SDNers,
             when i transported a update rule from D to Q, the update rule still remains inactive. I repeated the transport again and again still it wont change although in D it is active. Even other objects are fine. I did only necessary objects first time and in the repeats i did dataflow b4..Any help??
    Thanks
    Dave

    Hi Dave,
    You need to ask your BASIS Team help in this regard.
    First you have to identify which trnsports are to be reversed. For Example, The update rules were active until 17 jun 06. On 18 june 06 you transported some new changes to the cube or IS and the update rules were deactivated. Then you created several transports to activate the update rules and they are all failed.
    So you have to back the changes upto 17 jun 06.
    Once all the transports are reversed you can see the update rules active in QA.
    Then you create a fresh transport and apply the changes. Make sure,If you change a cube ot IS, you also have to include UR in your transport.
    Hope this helps
    Praveen

  • After software update wi-fi network not found

    Turned on apple tv (newest one) this morning and there was an update so I had it run, after restart, Apple TV cannot find wifi network any longer although it found it fine to update, my phone and laptop in the same room 20 ft from the router are having no trouble connecting. I have 2 wi-fi networks (linksys router and airport) and it won't find either.
    How do I trouble shoot this problem? Nothing has changed in my setup. I do not broadcast SSID, watched movies on netflix though it fine yesterday. Did the update change something?
    Any suggestion would be appreciated.
    Betsy

    Betsy, i just updated my second gen apple tv and the same thing happen to me. After some trial and error attempts to locate the network i ended up sending it to sleep then unplug it, wait a sec, and plug it back and voila!! Everythings back again. Hope this helps, good luck.

  • Iphone 5 will not update; no error code; not found; can't restore

    Tried to update my iPhone 5 to ios 8 yesterday via the phone's Settings.
    It hung, and gave me the iTunes/USB cord symbol, but iTunes is not recognizing it no matter what I do.
    It won't let me update or restore (it tries, but then comes out as not recognized). There is no error message.
    I also don't see it in "My Computer."  I am on Windows 7.
    I am traveling in two days and really need to fix this.
    I have tried several different troubleshooting steps with USB cord, rebooting, etc., to no avail.
    UPDATE: another try with a different laptop that I don't ordinarily use for iTunes gave me "An unknown error occurred. (3194)"
    Please help. Many thanks in advance.

    Resolve iOS update and restore errors
    If you can't update or restore your iPhone, iPad, or iPod touch

  • Portege R700 - after Java update UMTS/3G is not found

    Portege R700 Win 7 Prof.Pro x64.
    After updating from java 6u20 to 6u23 the wireless manager isn't able to find the UMTS/3G device. Afterswitching back to pref system recovery point, the UMTS/3G device was detected by the wireless manager correctly and everthing works fine, but the recovered java 6u20 doesn't work in the system and even in the browser (ff 3.6.13 32bit).
    What can I do to get back correct function?

    Hey,
    >but the recovered java 6u20 doesn't work in the system
    What does this mean exactly? Do you get an error message?
    Maybe you have to update the 3G driver with new Java version. Have you already tried that?

  • When I go to run Firefox update popup says "application not found"!!!!!

    I am so sorry but I do not know what other information you require

    if you don't want to lose your Bookmarks then try following version:
    http://download.mozilla.org/?product=firefox-3.6.18&os=win&lang=en-US
    if you want to start from scratch then uninstall Firefox and download & install this version:
    http://www.mozilla.com/en-US/firefox/fx/

  • Error while copy of Update Rules from ODS 0SD_O03 to InfoCube 0SD_C13

    Hi all,
    I work on a NW04s SPS9 System I would like to simply copy Update Rules (from an ODS to an InfoCube) from the BCT to the 1:1 Z-Copies of these Objects.
    To do so, I copied the InfoProviders 0SD_O03 and 0SD_C13 to Z-Versions. In SAP BCT the InfoCube is updated from the ODS. The ODS itself is updated from InfoSource.
    After successfully copying the two InfoProviders as next step I tried to copy the Update Rules from the Content version Objects to the Z-Version Objects to link them.
    Similar to copying update rules in 3.5 I tried
    - right click on "ZSD_C13"
    - choose Additional Functions - Create Update Rules"
    - choose DataSource: ODS Object "ZSD_O03"
    - choose Copy from: InfoCube "0SD_C13"
    This result in the error "0SD_C13 is not suitable as a template for copying update rules".
    Some hints that might help:
    1. The very same error occurs if I try to copy the Update Rules from 0SD_O03 to 0SD_C13.
    2. I also tried to copy both Update Rules (to C12 & C13) on a BW 3.5 system where it worked fine: The update rules from both Z-ODSs to both Z-Cubes were copied correctly 1:1 and without any errors.
    3. In the NW04s System I was able to copy the Update Rules from the InfoSource 2LIS_11_VAITM to 0SD_O01 (as well as from 2LIS_11_VAHDR to ODS 0SD_O03). So I only cannot copy Update Rules from ODSs to InfoCubes while it is possible to copy Update Rules from InfoSources to ODSs.
    4. During copy of 0SD_O03 the system warned: "InfoObject 0FISCVARNT needs to be in key for DataStore object ZSD_O03". No matter whether I move this IO to the keys of the Z-ODS, the Update Rules copy does not work.
    - This warning does not show up on BW3.5 when I copy the very same ODS. Can anyone explain this?
    - This warning is not displayed during the copy of ODS 0SD_O01, just for 0SD_O03.
    5. Obviously during a preceding test I actually must have been able to copy the Update Rules for another copy of 0SD_C13 (as I can see the Update Rules in the SAPGUI). I stopped this first test as I was not able to do the Update Rules copy for 0SD_C12.
    Yet as of today I cannot copy Update Rules this for both cubes 0SD_C13 as well as 0SD_C12. So yesterday there was no error on copying the Update Rules to InfoCube ZSD_C13, but today there is. To my knowledge nothing has been changed in the System Setup / Customizing in the mean time.
    6. For both cubes ZSD_C13 as well as ZSD_C12 it is possible to copy Update Rules that map from the BCT ODS to the Z-InfoCbes. So I can copy Update Rules from 0SD_O03 to ZSD_C13 and from 0SD_O01 to ZSD_C12. This would point in the direction that the copied ODSes are the source of this behavior?
    I am not sure whether this is a special NW04s behavior and how to use it correctly so the Update Rules can be copied.
    Please could you help on how to copy these Update Rules in NW04s or share your experience if you had similar?
    Thanks a lot,
    Werner

    Hi Vinod,
    Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
    Hope this helps...

Maybe you are looking for