Update to 7.7 or 8.0 doesn't show up in available upgrades

Hi all
As far as i like to upgrade my four S370 Websecurity appliances running on version 7.5.2-303 to Version 8.0 i couldn't see any available upgrades on the list. Before that, I could do/see every update on version 7.5.xy but no further images from 7.7 or 8. At the moment there is still one update sticky on the list "Update for RAID controller firmware (For S360/S370/S660/S670 only, reboot required)". but this Update i already installed and also tolds me that it is installed.
How do i get access to the new software versions 7.7 or 8.0 for my security appliances ?
Thanks for a feedback.

Hello,
7.7.0 and 8.0.0 are both FCS releases and have not been provisioned for all customers. If you would like to upgrade your appliances to either of these versions you will need to open a support case with TAC to get them provisioned. When you open the case please make sure you provide the serial numbers for all your appliances you wish to upgrade to speed up the process.
Best Regards,
Michael Hautekeete
Customer Support Engineer
Cisco Content Security - Web Security Appliance
http://www.cisco.com/en/US/products/ps11169/serv_group_home.html
https://supportforums.cisco.com/community/netpro/security/web
https://supportforums.cisco.com/community/feeds?community=2091

Similar Messages

  • Used to zoom computer screen while using apple tv, since update, my screen is mirrored, but zooming doesn't show up

    I used to be able to zoom in and out on my computer screen while using apple tv. For example, zoom in on a certain URL or ribbon. Since the update, my screen is mirrored, but when I zoom in and out to show my Word ribbon up close, etc., the zooming doesn't show up. My zoom preferences are set on computer.

    You might try restarting your device, your router and your Apple TV.

  • HT4589 How do I get the update to 10.0.3? It doesn't show up in software update and I can't find it on the Apple site.

    I am stuck on 10.0 I have not received any updates since I installed FCPX last june. I can't find any links to the update on Apple's site and Software update doesn't show FCPX in its software list. What's the deal?

    If you don't meet the minimum system requirements, it will not allow you to download it:
    http://www.apple.com/finalcutpro/specs/

  • My iphone/itunes just did the complete new update with Icloud but the icloud icon doesn't show up anywhere on the iphone or my computer even though the install said it is all done and complete.

    The Itunes and Iphone just did the complete new update addiing on Icloud and new applications.  After all was done and it said all was completed - the Icloud icon is not on my iphone screen anywhere nor is it on my computer after I did go to the control panel and set up.   I tried repairing the download and it said all was fine.  What needs to be done to get this all to work.

    Hi there,
    Thanks for the reply.  I did think that could be the case but then other books would also show up as apps on phone but not counted as an app.  Maybe book apps downloaded from the app store work in this way whereas books bought from the ibooks app show in ibooks and not as apps.
    I guess that would make sense, it must be because they are books but downloaded from the app store rather than the book store so they are visible as an app but don't actually get counted as an app.
    Would you think that's the case too?
    Thanks
    Adam

  • ARD doesn't show all computers after upgrading to Yosemite

    Yesterday I upgraded my Air to Yosemite and after that I have issues with Apple Remote Desktop 3.7.2, the issue is that I can't see all the other Mac clients we have in the office, I have reinstalled ARD to see if that solved the issue but no.
    I also upgraded one of our iMacs to Yosemite which also have ARD installed (3.7.2) and it is the same issue on that one, we can see some of the clients but not all.
    But the thing is that the clients I missing in my Airs ARD I can see in the iMacs ARD and vice versa, but I can't find that iMac in my ARD and it can't find my Air.
    We are connected to the same netowrk and the same accesspoint.
    Everything worked fine when we runned Mavericks.

    Hallo,
    I have exactly the same problem. After installing  (update) Yosemite on my (2013) iMac, the system doesn't properly shutdown anymore.
    I have been waiting for hours, but nothing happens ... there is a black screen  and a rotating thing ... and the only option to physically shut it down is to hold the power button
    best regards,
    Jens

  • Knetwork doesn't show the networks available

    hi guys,
    I can see the all available networks around here by using the command iwlist wlan0 scan, but i'd like to use some gui networkmanager to make the configuration easier.
    I've installed knetworkmanager and networkmanager, when i press on knetworkmanager on system tray, it doens't show any network, am i missing something? what am i doing wrong ? what are the steps to get it work?
    Driver RTL8187b
    # zcat /proc/config.gz | grep CONFIG_RTL8187
    CONFIG_RTL8187=m
    t.i.a

    For KNetworkManager, you have to open the applet and then select "Create network connection" under your WLAN interface.  Then you'll get a dialog that lists available networks, or you can connect to a hidden one from there, too.

  • Library doesn't show up after attempted upgrade

    Error 1324 the path to my pictures contain invalid entry, is what it says when it gets ready to install 6. Now I can't access my library, any thoughts?

    hi Debi!
    hmmm. are you still getting the 1324 on the upgrade? or is it a new error?
    I took your advice and disabled anti-virus and my Itunes came back ... Will I have to disable every time I want access?
    just checking. what security package are you using? Norton Internet Security 2005, by any chance?
    love, b

  • Home cable wireless network doesn't show up in available networks

    Hi, I've just arrived in a new apartment with an iBook G4. I travel a lot and am able to easily pick up and connect to wireless networks. The apartment I've moved into has Time Warner Cable service, including a cable modem and a Belkin wireless router. The other three roommates all have PCs and connect just fine. I have looked at their computers, and they are connected to "WLAN", an "unsecured" wireless network. Although I am in very close proximity (i.e. 2 feet), I still CANNOT get the network to even show up on my list of available networks. It shows lots of other networks belonging to other apartments in the building, but it won't show the one for this apartment. I have tried all the other names that DO come up and they are not this one. I called TWC and they said I will have to buy an Airport wireless router if I want it to work with my Mac. Is this true? I don't know why the Belkin-based network wouldn't even *show up* in my list! It's not like it shows up and then I can't connect... it's like it's completely invisible. At the moment, the modem/router are unconnected to any other computer; they're just hooked up to the TWC cable. As an intermediate solution, I unplug the ethernet cable that connects the modem to the router, and then plug it into my computer. It works fine with ethernet connection between the modem and my computer, but I can't get my iBook to recognize the Belkin wireless router.

    You DO NOT need an Airport Router. That is a tech person that is pretending to know Apple computers.
    Your network might be "hidden" so that others (like your neighbors) cannot see it and use it.
    I would check the name of the network on your roomates' computers. The when you try to connect use the choose another network option. You will be prompted to type the network name. Type the name exactly as it appears on the other computers (case sensitive).
    If it is truly unprotected that should work.
    I could also be Mac Address sensitive which is another issue, but try this first.

  • SE07 doesn't show Import status after upgrade to ECC 6.0

    Hi,
    we were on 4.7 and we recently upgraded to ECC 6.0 EHP4. When we were on 4.7, after a release, we used to monitor the import status of all the transports going in, using transaction SE07. Looks like this transaction wouldn't work anymore in ECC6.
    I can access the transaction, but I cannot expand the "Execution" to see the status of the transports which went in today. 4.7 used to show all the transports which were impoerted on that day.
    I know we can check the import logs by pulling up each transport, but SE07 will show you a consolidated list with all the detail and will be very easy to find what we are looking for.
    We are on Oracle 11g on Solaris 10. Please help.
    Regards,
    Vijay

    Hi Tony,
    I donot think it is an authorization problem. I have tried with a test user with full permissions and also with DDIC user, but still the same.
    Regards,
    Vijay

  • SMS inbox doesn't show new messages after upgrading to OS 5.0.0.681. SMS format appears as IM.

    My SMS inbox doesnt show new messages and also my Curve 8900 doesnt prompt for any new messages. However, the Mobiso application (which logs calls, texts) shows messages coming in with its text lengths. I asked this to Blackberryhelp on Twitter but it said to contact service provider, but there is nothing wrong with it. The format of the SMS inbox should have something wrong otherwise the Mobiso application should not have logged all messages.
    Please help me, i am missing all my daily SMS since last 20 days.
    Will degrading the OS help? Which is recommended OS version for BB Curve 8900?

    Hi,
    Here are some good articles listing the available methods for organizing and displaying messages in device OS 5.0. If you can't set your exact preferences I suggest looking in AppWorld for custom programs.
    Let us know how it goes!
    Thanks,
    Bifocals
    What is new in BlackBerry Device Software 5.0    
    Option for separate SMS and Email message inboxes is missing
    How to integrate SMS text messages with BlackBerry Messenger 5.0
    SMS text messages received from multiple senders appear in the same conversation thread on the Black...   
    Organizing your inbox’s main Messages list
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • I purchased the Photoshop CC subscription but Lightroom 5 doesn't show as an available download

    I'm running a Dell XPS 17 with windows 8.1. Photoshop installed fine.
    Any help would be great.

    Try opening the Cloud app, signing out and signing in again.

  • IPod doesn't show up in My Computer/iTunes

    I tried the Driver thing with updating even deleting and reinstalling still it doesn't show up in My Computer or iTunes.
    I did show up like a week ago but then it said it needed a restore or something but now if I plug it in I hear the sound a device is plugin but nothing happens if I open iTunes I don't see the iPod.
    I also tried resetting didn't work either
    The iPod itself still works listening to music on it everyday but I want it to work in iTunes because I want to put new music on it.
    Please someone help me

    Have you tried these pages:
    *[iPod Missing in My Computer or iTunes for Windows|http://support.apple.com/kb/TS1369]*
    *[Ipod not recognized properly|http://support.apple.com/kb/TS1538]*
    If you can't see the ipod in disk management or the device manager, before you connect the ipod, open itunes, select edit/preferences, leave this window open and click on show desktop. This will make itunes busy. Then connect the ipod, and try the above help pages.

  • My java applet doesn't show up in Firefox

    We have a new Mac running OSX 10.8.4 and installed with Firefox 21.0 and Java 7 update 25. The web applet/plugin doesn't show up in Firefox, if we go to java.com and do the tests it just comes back 'We are unable to verify if Java is currently installed and enabled in your browser'
    The same test in Safari comes back fine and shows Java 7 Update 25 installed and working.
    The plugin does not show at all in Firefox add-ons. Browser functionality is enabled in the main Java control panel.
    We have completely removed and reinstalled both Firefox and Java.
    Thanks

    Hi iNerd
    Thanks for the link but neither of the two options that are discussed are presented to the user. Instead the user just gets the message 'We are unable to verify if Java is currently installed and enabled in your browser'. I know it is installed and enabled for general browser use as it all works fine in Safari. We would obviously just use Safari except the key site the user needs to link to works better with Firefox.

  • Battery doesn't show up on top menu

    There is a black "X" at the top of the screen and when I run the cursor over it, it says something like "Battery not found". I tried the Apple-suggested fixes such as downloading the updates and so forth, but it still doesn't show up and I can only start the computer with the AC adaptor. The cord from the adaptor has a green light when it is plugged in. I even tried taking out the battery, pressing the "on" button and reinserting the battery, but that didn't work either. Any help is appreciated.

    Hi Warren,
    If all suggestion from here:
    http://docs.info.apple.com/article.html?artnum=305364
    failed to fixed your battery, consult your apple care or apple store, and they will examine both your battery and macbook and might give you new battery under warranty if needed.
    Good Luck.

  • RMBP doesn't show correct 'available HDD space'

    Hi,
    I'm using rMBP 15" early 2013 with OSX 10.9.5. My problem is (for a while) OSX doesn't show correctly my available HDD space. It is internal 256 GB SSD. How can i know that it doesn't show correctly? Because my Disk Utility says 69.64 GB free space but my Finder says 92.14 GB (Huge difference) ! Also my PC partition tells about different story but i don't care it (Who cares silly billy Windows? ) My guess is Disk Utility says correct.
    This problem started with Diablo III. I installed it (13 GB download for a patch !!! c'mon Blizzard) and after that my Finder starts to lie to me (Before installation, both Disk utility and Finder says 101 GB approx.
    Any idea?
    p.s : İ did several times Repair disk permissions and repair disk. Please don't advise it..
    Thanks

    Go step by step and test.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Empty Trash.
       http://support.apple.com/kb/PH13806
    3. Disk space / Time Machine ?/ Local Snapshots
      Local backups
       http://support.apple.com/kb/ht4878
    4. Re-index Macintosh HD.
        This will take a while. Wait until it is finished.
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409
    5.Try OmniDiskSweeper. This will give the storage size details of the items.
       Select Macintosh HD and click  “Sweep Selected Drive” at the bottom.
       Delete the files yo don’t want to keep.
       Be careful. Delete only the files that should be deleted.
       https://www.omnigroup.com/more

Maybe you are looking for

  • Photos not showing up right! Please help!

    I imported some photos into iPhoto, and when I put them over a clip and hit play in iMovie, you can see the video playing underneath (where the two black bars are above and below like on widescreen). I don't know what to do!

  • How to Show Who Checked Out Proj Documentation

    When a document is Checked Out on the Proj Documentation tab, is there a field to query and report on to show who Checked Out the document? Also in cases when the person authorized to check out the doc hands the document to an editor, is there a fiel

  • Mac Pro 2013 fan speeds up to maximum after restart.

    My brand new Mac Pro 2013, hanged on shutdown.. so I had to restart by using the button on the cylinder, when it restarted it sounded like a vacuum cleaner, the fan started to spin fast and didn't stop anymore and my mac was suddenly very slow :S. Af

  • Keynote doesn't work!

    Keynote jumps to the iPad home screen when importing ppt. file from my email. What.s wrong?

  • Need Toshiba tools and utilities for my Satellite A660-149

    Hi friends I have formatted my Toshiba Satellite A660-149 and I didnt create recovery CD/DVD. I have installed Windows 7 but now thing is that I dont have any of Toshiba features like eco utility, HDD protection, face recognition, NVIDIA graphic cont