Update to NW04 SP27: J2EERT file only 17KB?

Hello,
we want to test SP27 for NW04 (now we have sp21) and we download all files down from SAP MP, but J2EERT file is only 17KB. Is that right? Normally file is about 350MB to 400MB. and when we use sapcar for extraction, error is shown (Package damaged). failure in file for download, wrong file or do we we overlook something?
thanks

yes, you are right the file size should be more than 300 MB. You need to raise an OSS call for this issue.If you try to download the old SP26 J2EERT26_0-10001982.SAR which is more than 300 MB.

Similar Messages

I have just downloaded the latest "Office" update, and now my xls files only open in "Numbers". Can this be fixed?

I have just downloaded the latest "Office" update, and now my xls files only open in "Numbers". Can this be fixed?

You can try right clicking on one of your xls files select get info then select open with, select other then choose office excel and check the box to say always open this file type.
Hope this helps

Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried

Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.

Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.

.avi files only play sound after update

I have a few .avi videos that used to play both audio and video before the 7.13 update yesterday, and now these .avi files only play audio, and the video is non-existant.
I re-installed my DivX codecs, and I'm not sure what to do next.

I am having the same problem.
Does anybody have a resolution to this issue?

My updated help file only opens the TOC/Index/Search

I have to update an old project that uses WinHelp, so I installed RH X5 on an old XP machine. The original help file always opened in a 2-pane window with the ToC on the left and the default topic on the right. My "updated" help file only opens the ToC/Index/Search screen in a single pane. How do I get the 2-pane window to appear?
This is what I'm looking for

I have edited the topic title. The idea is to spell out the problem in the body.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

[svn:bz-3.x] 15191: Minor update to the build. xml and only make files write protected with chmod.

Revision: 15191
Revision: 15191
Author:   [email protected]
Date:     2010-04-01 07:06:21 -0700 (Thu, 01 Apr 2010)
Log Message:
Minor update to the build.xml and only make files write protected with chmod.
Modified Paths:
    blazeds/branches/3.x/modules/sdk/build.xml

DyNamic I agree that is sounds like you may be facing a network configuration issue. Please let your network people know that you need access to the following servers and ports to download Adobe applications through the Adobe Application Manager:
ccmdls.adobe.com:443
ims-na1.adobelogin.com:443
na1r.services.adobe.com:443
prod-rel-ffc-ccm.oobesaas.adobe.com:443
lm.licenses.adobe.com:443
In addition for updates to download properly you will also need access to the following servers:
http://www.adobe.com/:80
htttp:///swupmf.adobe.com/:80
http://swupdl.adobe.com/:80
http://crl.adobe.com/:80

I recently lost my windows laptop due to a virus. I had backed up all files onto a drive(files only). However no itunes playlists. i have all my playlists on my iphone and pics etc however when im trying to sync to my new computer itunes deletes all data

I recently lost my windows laptop due to a virus. I had backed up all files onto a drive(files only). However no itunes playlists. i have all my playlists on my iphone and pics etc however when im trying to sync to my new computer itunes wants to deletes all data off of my iphone so i click cancel
i want to update to iOS 5 and still have itunes be able to copy my playlists from my iphone. for free. why does apple provide a recovery from iphone option?

If you have a backup, restore the ENTIRE iTunes folder to the computer. This restores the library and device association files. If for some reason you chose to only back up the media and not the entire iTunes folder, then the only option is to let iTunes wipe the drive and re-sync.

ACS v5.2 - Unable to update User integer attributes through File Operations

Hi,
I have created some internal users on ACS v5.2 and added some Unsigned Integer attributes for each user. I am trying to do a bulk update of these integer attributes using the File Operation facility. However no matter what number I put on the import template it doesn't get updated and displays a "0" in the user config.
The import template is validated successfully with no errors and also the string attributes are updated correctly.
There is a sort of work around of deleting the users and adding them back in with the updated values. But this is not feasible as it would reset their passwords. I have also tried saving the csv file in Open Ofifce instead of Excel
Has any one else come across this problem?
(I am unable to see this issue in the Release notes or Bug tool kit although there is a similar issue when updating devices in CSCth68051)

Hi,
Thanks for the reply. I have managed to recreate the problem to show you but it is a bit more complicated than I first thought. The problem only occurs when the integer attributes are added after the user is created.
I created a dummy user. The MTL and TLS attributes were present before the user was added. I then added the XXX and ZZZ attributes afterwards and assigned them default values. The default values show up in the GUI config.
However when I export the database to a csv file only the values of the MTL and TLS attributes show up in the export file:
I then downloaded an import template and updated the integer values for TLS,MTL, XXX and ZZZ for the dummy user:
The file imports successfully with no errors. However, when I display the user config only the MTL and TLS attributes have changed. The XXX and ZZZ attributes have stayed the same.
I thought it might be because I was assigning a default value of 0 to the new attributes but I assigned ZZZ a default value of 1 and the same thing occurred.

H61MU-E35 (B3) Updating BIOS....File Not Found Error

I have MSI H61MU-E35 (B3) Motherboard with Intel i3 CPU.
I downloaded latest BIOS File 7680vC3.zip (on web page it's says Version: 12.3 from -> -www.msi.com/support/mb/H61MUE35_B3.html#down-bios
Using Windows XP OS From 7680vC3.zip => Extracted E7680vC3.exe => Placed on USB Drive (I did not format USB Pendrive, and used by just making it empty by deleting files) ==> Ran this exe file on the computer where this motherboard is....
Inside Windows XP, when BIOS Update process started, In a green window, it shown me current BIOS old version and New Version side by side. (I did not given much attention to notedown from which number to which number it's updating).
In Windows XP after BIOS Process completed, it restarted computer (I kept USB File as it in the computer as I had read that, I have to keep USB in computer after restart).
When computer restarted...nothing came on the screen and just blank screen for long time and on the right side on screen bottom corner only letter like: A2 stayed for long long time. I waited for 15 minutes but nothing was happening except blank screen...
So, I restarted computer....and kept USB as it is in the computer....but Nothing comes on the screen...
After I concluded that, something is wrong, to resolve the issue...
--- What Try and Experiments I have done ----------------------------------------------------------------
(1) I placed Restarted computer without USB: and Message comes on the screen is:
BIOS Update is not yet completed, please insert the USB pen drive and reset system.
(2) I refered some forums, and also contacted MSI Support. As suggested, I formatted USB Drive with FAT32 and placed E7680IMS.C30 file (only one file) on USB placed in computer and started computer.. Now Message is coming:
Updating BIOS...... File Not Found..
Note that: E7680IMS.C30 File was given to me by MSI Support Staff as I did not kept Original files during formatting USB PenDrive.
But computer is not looking for .C30 Rom File, Computer is looking for .BIN File
(3) I have remove the battery and waited for 5 min. and placed again, to reset BIOS, but not difference on result or on message...
Renamed: file E7680IMS.C30 to EIVB.BIN
Result: Just Blank Screen with A2 text on right side bottom corner, No other message
In some other same issue post, they recommand to change ROM File name to: EIVB.BIN which worked for others, so I also tried and renamed: file E7680IMS.C30 to EIVB.BIN, in this case, I was able recreate original Issue: When computer boots, Screen stays completely Blank, and on the right side bottom corner, only 2 digit tect comes is: A2. Computer does not give any other message and nothing happens...even I waited for 30 minutes...
Also, by looking at USB Pendrive light, I can tell that, motherboard is reading file on the Pen Drive...
Renamed: file E7680IMS.C30 to E7680IMS.BIN
Result: Message comes on the screen: Updating BIOS...... File Not Found..
(5) What I am thinking is: When motherboard power-ups, it's giving me two different type of Valid message based on if USB is in the computer or not, based on if file name is .BIN or not, so I believe motherboard is still not dead and there are hope to feed the file which motherboard is looking for. But issue how to find what specific file which it's looking for... Even sometime I have seen at screen right side bottom area, 2 Digit numbers are changing just like system is doing internal healthcheck before booting up...
(6) Note that, I would like to put old version file on USB to feed, but one of the biggest issue with MSI is, once you download EXE from their website, to Extract EXE file content it needs to be run on the same motherboard computer, so in my case, if your motherboard is not in bootable cituation then you can not extract any other BIOS File to try...
Please help me...by havin this computer down....I am suffering everyday...
(By profession, I am electronics Engineer and have worked with programming Microcontroller and bootloaders, but in this case, I do not have SPI Programmer to program BIOS chip externally.)

Thank you flobelix and Nichrome.
Quick Result Summary: 128MB USB Key formatted FAT32 with HP Tool, made MS-Dos Bootable and placed EIVB.BIN file given by flobelix, but final result is: Screen comes Blank and only shows "A0" Code at right side bottom corner. nothing else.
Detail
Since Flobelix proviced ROM BIN File, I was too exicited to try it out and here is what I did...
(1) As per Nichrome link for HP USB Format Tool, I installed it on "Win XP" machine, and formatted 128MB USB key by selecting "FAT32" and selected option to make "MS-DOS Bootable" and shown Win98 source files as per the instruction.
-128MB USB drive made bootable with FAT32.
(2) I downloaded EIVB.rar given by flobelix and extracted and copied EIVB.BIN file on USB root.
Inserted USB in MSI and powered up...
As soon as I give power: Imidiately one normal beep and Screen comes completly Dark Blank. No message about "File not found". only at right side bottom of screen, it shows "A0".
I inserted USB key in each and every USB slot, but result is same: Screen stays Blank and on right side corner only "A0" letter.
I given around 3-5 minutes time to see something changes on screen, but no change.
- If I power-up computer without connecting any USB Drive: then message comes on screen that: Bios Update has not completed, please insert USB Key and Reset System.
- On USB Key, If I put ROM File with any other name (except EIVB.BIN) then Message comes: Updating BIOS... File Not Found...
- I have removed battery to give a try for resetting BIOS, but not change.
Question:
(1) Is it possible that, motherboard is looking for specific version of File or some different version of file ? and just staying silent and not complaining for existing EIVB.BIN ?
Here is I experiment: I simply created empty text file (0 Byte) on USB Drive and given name EIVB.BIN and booted up computer and same result: Blank Screen and just "A0" on right side bottom corner.
So, it tells me that, when power is given, the program which executes in motherboard for BIOS, it is not able to identify real or fake EIVB.BIN. I think, it's looking for some specific file and when not found, it's getting confuse on what to do....and not saying anything on the screen....
Has anyone old version BIN file of H61MU-E35 (B3) ?
Is there any trick so I can download older version Packaged EXE from MSI website and extract it ? I can give a try....

Files only load partially

In PS CS6 (trial version for windows - I use windows 7) ordinary photo files only load partially. Huge pixel blocks seem te be absent. Only after a second attempt they load as should be.
My hardware is rather up to date (6 GB work memory); I 've never had this problem in CS 5.

Thanks for reacting, but I don't think that's the problem, according to this message:
Product
Current
Installed Driver
Latest Driver
Update
GeForce GT 320
301.42
Your PC currently has the latest driver installed for your GPU. No driver update is necessary at this time.

When I import my files only the audio plays back not the video. If I export the sequence its there?

When I import my files only the audio plays back not the video. If I export the sequence its there?
I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
Any help would be appreciated and if theres any more info I can provide please let me know.
Thanks
Drew

Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
Also, More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

I downloaded Acrobat Pro 9 to a new computer and once a download has been completed i cannot see a file, only a grey window

I downloaded Acrobat Pro 9 to a new computer and once a download has been completed i cannot see a file, only a grey window

The updates are available via this FTP site: ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/
You need to download and install them in order.

I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi ‏729 KB

Unable to upload the updated/modified Report template (rtf file) in siebel

Hi,
I am unable to upload the updated/modified Report template (rtf file) if already exists in the local database.
Initially I have uploaded a rtf template, generated xliff, registered it and can view the report from the registered view. Later I have made few changes to the rtf template, in the reports template view, I have uploaded this. When i run the report in the registered view, I am able to see the earlier version and it doesnt show me the updated changes.
I am using 8.1.1.3 siebel and BIP 10.1.3.3.1 on local.
Looking at the metalink found "How To Upload Modified RTF Template Files In The Siebel Application For BI Publisher Reporting [ID 1136418.1]" which is related to server but I am working on local database
Please find attached the template, xml file. can you please look into this and update me ASAP
Thanks,
RV

Hi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean

When I update a cell in one file folder I want that same cell

When I update a cell in one file folder called (X) I want that same cell to updated in a different file folder called (Y). Can this be done?

Question asked and answered many times.
There is no link between Numbers documents !
I already posted an AppleScript filling this hole.
Yvan KOENIG (VALLAURIS, France) dimanche 7 août 2011 15:44:03
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Update to NW04 SP27: J2EERT file only 17KB?

Similar Messages

Maybe you are looking for