Update was terminated when we do commit work twice in short time
Hi Experts,
i have one Data bas update problem. My requirement is to create contracts in CRM with new item category(suppose ZSFT) than what is determined(ZSRT). i am using CRM_ORDER_MAINTAIN FM to create contracts after that i am calling CRM_ORDER_SAVE to save transaction then COMMIT WORK key word to commit in data base. Since transaction is created with Determined item category(ZSRT) i am calling change transaction bapi BAPI_BUSPROCESSND_CHANGEMULTI to change item category after that BAPI_BUSPROCESSND_SAVE to save transaction and BAPI_TRANSACTION_COMMIT to commit the work. but second commit is not happening instead error message "Update was terminated" recieved from author "XXXX". when i created test program with BAPIs to change already created contracts to change item category it is working fine.
Any body has any clue.
Thanks in advance
Siva
Hello Siva, Is your problem solved ? I have the same error and unable to update the partner info on Service confirmation.
Here is what I'm trying to acheive.. I'm working on an interface that creates a docflow and creates service confirmation against existing service order. In the confimation file when I have new ZAPP((partner function ZAPP) I need to delete ZAPP that gets copied over from service order into the confirmation in docflow. Right now, in my first CRM_ORDER_MAINTAIN call I have one entry for new ZAPP and I have It_docflow populated. This creates two ZAPPs on the confirmation. I need to delete ZAPP on the confirmation that is copied over from service order.
Right now I'm reading the confirmation and trying to delete the ZAPP but after my second crm_order_maintain,order save and commit call sequence I'm getting this error update was terminated.
Experts any help on how to get around this issue would be highly appreciated.
Thanks
Similar Messages
-
Update was terminated when creating document through FBR2
Hi,
I am getting the error "Update was terminated " when I try to change the GLcode and post the document through transaction FBR2. The ABAP dump error shows ASSERTION_FAILED in the program LGLIOA20 , form OBJECTNR_FIND_GLPCC. Moreover it's a V1 update.
I am not sure what data is missing during the posting. Can you suggest what would be the cause for termination occurred?
thanks
RengaWelcome to SCN.
Have you looked for notes on this problem?
Rob -
Update was Terminated when creating a Sales Order
Hiii...
When the sales order was created for the first time in the QAS System, it thrown a update error saying "Update was terminated user XXXXX". I checked the error message in SM13 and found that the error was in
RV_MESSAGE_UPDATE.
When i check the dump of this, there was a dump saying
" The length of COMMON PART "VEDACOM" in program "RVADOR01" is incorrect."
"Error analysis"
The structure of the COMMON PART "VEDACOM" in program "RVADOR01" is
different from the corresponding area in the calling program
"/SMB40/RVADOR01".
Length of the COMMON PART in program RVADOR01: 6600 bytes.
Length of the COMMON PART in program /SMB40/RVADOR01: 2840 bytes.
There is probably an error in the program
"RSNAST00".
This is for V1 Document type for ZA01 Output type.
Error occured at
896 * restore original NAST record (in case TNAPR-RONAM changed something)
NAST = TEMP_NAST.
The same thing is working fine in DEV. But problem in QAS. This is the first document generated in QAS.
Kindly help.
Best Regards,
Srikanth.SAP Note 1614849 addresses this.
Cause
There are two common reasons for the dump: a) Z-program or b) Incorrect
Program
Resolution
Replace the Z-programs with the standard output
Check the following customizing: SPRO > SD > Basic Functions >
Output Control > Output determination using the condition technique >
Maintain Output Determination for sales documents > Maintain output types.
Select Output type ‘BA00’, double click on “Processing Routines” and change for
medium 1 the program from ‘/SMB40/RVADOR01’ to for example‘RVADOR01’ -
How to rectify this error "Update was terminated" when i save the tcodeMe42
Hi,
I am working in Me42 transaction, after filling the messages when i give save its throwing an error message
"Update was terminated" received from author" Author name".
Why is error occuring what is the cause how to rectifyHi anitha,
1. This error is occuring
when the transaction data is being posted,
in the background via update task.
(using update FM)
2. goto tcode SM13
to analyse the error.
(u may take help of basis team)
regards,
amit m. -
Update was terminated when Dynamic modification rule is changed
Hi Gurus,
When short text is changed manually in Dynamic modification rules (QDR2), I saved it "Dynamic modification rule xxx was changed". Next I got the error message: "Update was terminated".
Detail:
System ID.... xxx
Client....... xxx
User..... xxxxxxx
Transaction.. QDR2
Update key... xxxxxx
Generated.... 06.11.2009, 11:54:46
Completed.... 06.11.2009, 11:54:47
Error Info... Processeur ABAP : RAISE_EXCEPTION
I think there is an incoherence in between tables QDDR & QDDRT.
How can we fix this error?
Thanks.
StéphaneHi
sometimes it happens that system takes some time to save & update the data in the background.
so wait for some time & again check .It will work.
The data which if changes do not have any repercation on existing system can be changed at any time.
check the tables
QDDR & QDDRT again
Regards'
Sujit -
How to resolve the problem of "Update was terminated" when posting
hello,
please give me a favor. I met a big problem when running FB01, the system give me the error message: Express document "Update was terminated" received from author. I test all clients, all of them have the same problem, how to resolve.
I use SAP ECC6.0 IDES, the error messages recorded by SM16 are:
DDIC_TYPE_INCONSISTENCY
SAPLGIVA
FGVALATT
16
//bas/700_REL/src/krn/runt/abucutil.c#2
ab_RxDdicTypeError
1053
20070528145604
8176
81920
0
37628064
3299600
879552
DG
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=5564)
When : 5/28/2007 14:56:4.843
Threads : 2
Computer Name : EXXEPT01
User Name : SAPServiceER1
Number of Processors: 2
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id d10
eax=00000201 ebx=00000484 ecx=00000210 edx=04bcf0de esi=00000484 edi=00000000
eip=7c82ed54 esp=053cd608 ebp=053cd678 iopl=0 nv up ei pl zr na po nc
eip=7c82ed54 esp=07e5fec0 ebp=07e5ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:07e5fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:29d6e4d3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
07e5ff04 010f51e5 000006e0 00000000 00000000 0613e580 ntdll!KiFastSystemCallRet
07e5ff84 7c349565 00000000 00000000 00000000 0613e618 disp+work!SigIMsgFunc [signt.c (594)]
07e5ffb8 77e66063 0613e618 00000000 00000000 0613e618 MSVCR71!endthreadex
07e5ffec 00000000 7c3494f6 0613e618 00000000 00000000 kernel32!GetModuleFileNameA
-cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:053cd608=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:272dbc1b=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
053cd678 77e6ba12 00000484 ffffffff 00000000 053cd6ac ntdll!KiFastSystemCallRet
053cd68c 0100a516 00000484 ffffffff 00000002 00000001 kernel32!WaitForSingleObject
053cd6ac 0055ab69 0055aba2 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess [ntstcdbg.c (449)]
053cd6b0 0055aba2 7c38b5c8 7c38b5c8 7c38b5c8 01d28c78 disp+work!NTStack [dptstack.c (1365)]
053cd6cc 0055abd6 7c38b5c8 00000000 00852a87 7c38b5c8 disp+work!CTrcStack2 [dptstack.c (352)]
053cd6d8 00852a87 7c38b5c8 00000000 005f0059 00310030 disp+work!CTrcStack [dptstack.c (182)]
053cd6fc 00855dd9 00000020 a02899f8 a02b037c 00000000 disp+work!rabax_CStackSave [abrabax.c (6842)]
053cd7d4 007fa810 0141ec20 0141ebf0 0000041d 203ec5e0 disp+work!ab_rabax [abrabax.c (1213)]
053cd7ec 00a1d65f a0284050 0000007b 053cd868 00000000 disp+work!ab_RxDdicTypeError [abucutil.c (1053)]
053cd818 00a1d747 a02a4fe0 a02a4fe0 a02a4fe0 00000000 disp+work!FirstLevelChildCnt [scsypar.c (3423)]
053cd894 00a1dca1 053cd8cc a02a4fe0 053d0d20 053d0ce4 disp+work!UcTypeToTree [scsypar.c (3578)]
053d0d28 00a1dd69 053d0d44 a02a4fe0 00000000 a02a4fe0 disp+work!UcTypeToFragView [scsypar.c (3845)]
053d0d70 00a170f0 a02a4fe0 104e3ac8 00000000 00a0cfa7 disp+work!sc_tparUcFragView [scsypar.c (3897)]
053d0d80 00a0cfa7 a02a4fe0 00000000 0295d6d4 a01bc106 disp+work!sc_loadflds [scsytyp.c (813)]
053d0d9c 00a1aafa a01bc106 0295d6d4 00000000 0295d6d4 disp+work!sc_ddictab [scsyddic.c (166)]
053d0ef8 00a1b4f8 00000004 053d0f20 a01bc106 0295d6d4 disp+work!simple_type_find_1 [scsytyp.c (2999)]
053d0f24 00a1b762 a01bc106 00000004 0295d6d4 0000000b disp+work!sc_complex_type_find [scsytyp.c (2621)]
053d0f4c 00a13e2b a01bc106 0000000b 00000000 0295d6d4 disp+work!sc_ctypid [scsytyp.c (2447)]
053d0f6c 00b8c83a 00000001 00000005 00000002 053d7a1c disp+work!sc_typid [scsymb.c (1733)]
053d79d4 009d2f1d 000000d1 0294d7d4 02939df8 02939d94 disp+work!rs_expan_abap [rsabap32.c (1241)]
053d79e8 00a08072 000000d1 053d7b04 a01bc0f4 00000000 disp+work!sc_expan [rsyn6.c (2228)]
053d7adc 00a076df 00000000 053d7b04 00000000 00000005 disp+work!parse [rsyn4.c (1398)]
053d7b1c 00a5c027 00000076 00000000 00000001 00000001 disp+work!sc_check [rsyn4.c (402)]
053d816c 00b2b436 00000000 06474310 06495096 00000000 disp+work!sc_inclu [rsyn31.c (1675)]
053debd4 009d2f1d 00000076 0294d7d4 02939124 02939114 disp+work!rs_expan_abap [rsabap31.c
053debe8 00a08072 00000076 053ded04 a01ae0f0 00000000 disp+work!sc_expan [rsyn6.c (2228)]
053decdc 00a076df 00000000 053ded04 00000000 00000005 disp+work!parse [rsyn4.c (1398)]
053ded1c 00a5c027 00000076 00000000 00000001 00000001 disp+work!sc_check [rsyn4.c (402)]
053df36c 00b2b436 00000000 00000000 00000000 00000000 disp+work!sc_inclu [rsyn31.c (1675)]
053e5dd4 009d2f1d 00000076 0294d7d4 02939124 02939114 disp+work!rs_expan_abap [rsabap31.c
053e5de8 00a08072 00000076 053e5f04 a01a00ec 00000000 disp+work!sc_expan [rsyn6.c (2228)]
053e5edc 00a076df 00000000 053e5f04 00000000 00000000 disp+work!parse [rsyn4.c (1398)]
053e5f1c 00a08b07 0295ba90 053e9c88 053e64c8 009ce139 disp+work!sc_check [rsyn4.c (402)]
053e5f2c 009ce139 00000000 00000000 00000000 053e64a0 disp+work!sc_checkStart [rsyn4.c (24
053e64c8 007e0f7f 053e9c88 00000001 00000000 00000000 disp+work!cg_generate [cgmain2.c (65
053e6510 0057a552 053e9c88 00000000 00000000 053ec954 disp+work!ab_gabap [abgen.c (1592)]
053e9cf8 007e1558 00000041 a0828954 00000000 00000000 disp+work!dy_gen_abap [dynpabsv.c (2
053ec914 00656064 a0828954 00000000 00000000 00000000 disp+work!ab_genprog [abgen.c (1345)
053ec964 006566ab a0828954 00000000 00000001 053ec9a4 disp+work!newload [abload1.c (388)]
053ec990 0065673b a0828954 00000001 053ec9a4 00000000 disp+work!ab_LoadProgOrTrfo [abload1
053ec9a8 0072796a a0828954 00000001 00000000 00000000 disp+work!ab_LoadProg [abload1.c (77
053ecadc 00708d14 00000000 a016ff64 0000001e 00003623 disp+work!ab_link [ablink.c (381)]
053ecb04 0070c9c0 a016ff64 0000001e 00000000 a0828954 disp+work!perform_load [abperf.c (68
053ed0bc 0067af78 00000003 a080fd88 00000000 053ed124 disp+work!ab_jxper [abperf.c (478)]
a016ff64 80000000 005f004c 80000000 00000044 80000000 disp+work!ab_extri [abextri.c (552)]
005f0025 458bec8b b1908a08 56000000 8a0c758b 0000b18e <nosymbols>
005f0025 458bec8b b1908a08 56000000 8a0c758b 0000b18e <nosymbols>
55c3c95b 00000000 00000000 00000000 00000000 00000000 <nosymbols>
State Dump for Thread Id 14ec
eax=00000001 ebx=00000103 ecx=fffffffe edx=05580000 esi=00000000 edi=00000000
eip=7c82ed54 esp=07e5fec0 ebp=07e5ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:07e5fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:29d6e4d3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
07e5ff04 010f51e5 000006e0 00000000 00000000 0613e580 ntdll!KiFastSystemCallRet
07e5ff84 7c349565 00000000 00000000 00000000 0613e618 disp+work!SigIMsgFunc [signt.c (594)]
07e5ffb8 77e66063 0613e618 00000000 00000000 0613e618 MSVCR71!endthreadex
07e5ffec 00000000 7c3494f6 0613e618 00000000 00000000 kernel32!GetModuleFileNameA
-FAGLFLEXT
123
700 Windows NT 2x Intel 80686 EXXEPT01 ORACLE ER1 EXXEPT01
700
NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
OCI_10103_SHARE
GregoryHello Greg,
Thank you for this question. What you are reporting looks to me like requires deeper analysis in the system. The channel for such questions is the Service Marketplace <i>http://service.sap.com/.</i> Please post it there.
Thank you!
Kind regards, Kyoko -
Update was terminated when Post Goods Issue
Hi all,
When I post goods issue, I receive a message "Update was terminated".
Then, I use SM13 to check update requests, I see an error
900 USERNAME 20.11.2007 10:47:27 VL02N
double click on that line I see error at module
8 MB_POST_DOCUMENT V1 Error
more details:
Row 13 in report LMBMBU04
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Finally, Error occurr at line:
INSERT mkpf FROM TABLE zmkpf.
Can anyone help me to solve this problem?
Thanks.Hi Nam,
This probelm is becuase you are trying to enter a record for which primary key already exists in the table.
The insertion you are doing with a set of values which already exist and sap is getting this error that the "Duplicate record during insertion". try to check your insertion values and through se16 check if they already exist in the table mkpf.
To rectify the data or else change the table and add one more unique to the primary key.
Abhishek Purwar
http://abhishek.purwar.googlepages.com -
Update was terminated when trying to issue print output using VL02N tcode
Hi friends,
I am getting follwing error when trying to issue print output using VL02N tcode:
Error: Update was terminated.
When seen in SM13 i saw following info for function module RV_MESSAGE_UPDATE,which was showing error:
Error Info: MC 601: Object requested is currently locked by user RAMU.
When seen in SM12,i don't find any lock by above user RAMU(which is my user id itself).
I request please give me some inputs on how to avoid this error.
Thanks & Regards
SeshagiriHi Nam,
This probelm is becuase you are trying to enter a record for which primary key already exists in the table.
The insertion you are doing with a set of values which already exist and sap is getting this error that the "Duplicate record during insertion". try to check your insertion values and through se16 check if they already exist in the table mkpf.
To rectify the data or else change the table and add one more unique to the primary key.
Abhishek Purwar
http://abhishek.purwar.googlepages.com -
Update was terminated on WSM8 " POSTING_ILLEGAL_STATEMENT"
Hi all
our system is ecc6 with IS -retail activated. support Stack level is 12 and database is oracle , os is windows.
We are getting express document error " Update was terminated " when executing WSM8 . on ST22, we are getting following error
POSTING_ILLEGAL_STATEMENT . We applied note 1053491
which is similar to the issue but it does not solve.
Here are the st22 dump details
Runtime Errors POSTING_ILLEGAL_STATEMENT
Date and Time 24.04.2008 19:03:48
Short text
Statement "COMMIT" is not allowed in this form.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSYDB" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
There is probably an error in the program
"SAPLSYDB".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"POSTING_ILLEGAL_STATEMENT" " "
"SAPLSYDB" or "LSYDBU27"
"DB_COMMIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
this is sm21 error log
Time Type Nr Clt User TCode Grp N Text
18:09:55 UP1 006 600 SAUGATA AB 0 Run-time error "POSTING_ILLEGAL_STATEMENT" occurred
Run-time error "POSTING_ILLEGAL_STATEMENT" occurred
Details
Recording at local and central time........................ 24.04.2008 18:09:55
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
05460 V1 Update Task No. 006 SAUGATA LB-TULIP 1 T Transaction Problem SABP
Further details for this message type
Module nam Line Error text
thxxvb 1346 ThVBCheckCommit
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. POSTING_ILLEGAL_STATEMENT
Technical details
File Offset RecFm System log type Grp N variable message data
66 160740 l Error (Module, Row) AB 0 ThVBCheckCommit thxxvb 1346
Please check and let me know if you need more details.Hi Jelena,
Here is the source code extract where error is . Will this be a standard sap program or a program modified by abaper?.
Source Code Extract
Line SourceCde
1 FUNCTION DB_COMMIT.
2 *"----
3 ""Lokale Schnittstelle:
4 *"----
5
6 EXEC SQL.
>>>>> COMMIT WORK
8 ENDEXEC.
9
10 ENDFUNCTION.
Can you share some more tips on this.
Thank you once again for that help full answer. -
Express document update was terminated in mm02
Dear experts:
when i use MM02 to change the material master,after saving,i get the error message'Express document update was terminated'.
The ID has working period of time and the authority is enough to do this,pls give some advice.
Thank you very much!Hi Stephen,
This error message comes when ur transaction doesn't get the proper system resources or when the load on the server is too much. Becuase of which tables dont get update and u get the error .
basically it is performance issue of the system. U can try after some time if proble persists u can contact ur BASIS team.
Regards,
AM -
Error 'Update Was Terminated' - While clearing an open item
Hi,
We are facing a problem where we receive an error - "Update Was Terminated" when we try to clear some entries for 3-4 vendors (posted in period 12 of year 2006. it happens only for those 3-4 vendors). We have identified the problem as follows:
1) We ran program SAPF190 and found that there is a defference in the 'debit balance' and Total of line items' for these vendors. I ran program SAPF71 (in Quality server) which rectified some entries. However, some entries still remain incorrect and these entries that still remain incorrect are ones - "which have a posting date of 10 oct 2006, but the posting period picked up by the document header is period 12, instead of period 7". Now, some other documents posted for the same vendor on the same date have picked up the correct posting period i.e. 7. I am really baffled at how this actually happened and howcome the system allowed it??
2) After running program SAPF190, there were some entries that got corrected (these entries were just not captured by the system in the balance field, and did not have the same problem as the entries mentioned above where the wrong posting period was picked by the system). When i tried to clear the line items for the vendors whose entries had been rectified, it still gve the update error. When i checked the number range status, i noticed something very odd:
"The number range status shows a number much higher than what the system is automatically picking for the documents (e.g system picks 230 as the document number when posting, but the number range staus in FBN1 shows current number as 256). Also, once 256 is reached (i posted 26 documents for it) and we post the 257th document, the error remains and the status number now moves up 100 places to 356). At this time if i post another document it picks the number 258 instead of 356...and if i keep posting documents till 356 is reached, im sure when i post the 357th document, the status will jump to 456)
Can someone please help me here!! I dont understand how and why this is happening!!
Thanks!!
Regards,
Angad>
Ravi Sankar Venna wrote:
> Hello,
>
> Please let me know the ERROR name you are getting and what is the transaction code you are using to clear. (F.13 or F-44)
>
> Try to analyze the dump in ST22.
>
> Regards,
>
> Ravi
Hi,
The error is "Update was terminated" . It sends this message to my inbox!! After searching a bit i found about the two reports - SAPF190 and SAPF071. After running them i found some balance mis-match. I ran the two programs and it rectified those mis-matched entries!! However, even after that, it is giving me the same "update was terminated" error. We are using F-44 for clearing.
This error is coming only for those entries which we had posted using a user-exit. Basiaclly these are entries for late payment which were programmed to be posted directly at the time of invoicing. I just checked the code of the exit, and these entries were (astonishingly) made directly into the BKPF and BSEG tables (infact the posting period was hard-coded to '12', which is why even when my posting date for these documents is 10.10.2006, it still enters posting period '12' in the header instead of '7'.). Therefore, there were balance mis-match when we saw the monthly balance in FK10N and compared it with the line items total for that month. However, on running report SAPF071, it corrected those entries, but the update error problem still persists!!
The exact error:
Update was terminated
System ID.... QAS
Client....... 100
User..... MOHGYA323233
Transaction.. FB1K
Update key... 4A206A2D00E5001202000000C0A80A35
Generated.... 04.06.2009, 11:24:59
Completed.... 04.06.2009, 11:24:59
Error info... F1 805: Clearing: Line item 001 -
Error 'Express document "update was terminated" from the author'.
Dear All,
I have created a delivery doc(PGI) with ref to sales doc, it gave the
del doc no. while creating billing do with ref to this del doc I am getting
an error " update was terminated". when I cheched Vlo2n it says that the doc does not exist.
Even I have done PGI the stock is not deducted( MMBE).
Please help me to rectify this error.
Thanx and Regards
Narender.NCheck if number range is maintained for accounting document to be generated at PGI level. You will have to consult an FI consultant for the same.
Also check the document flow & there is high possibility that PGI is not saved, but number range utilized during the transaction.
Regards,
Rajesh Banka
Reward points if helpful -
Update was terminated for MIRO t-code
Hi ,
When I am posting using MIRO it is giving error saying that 'update was terminated'
when i check in SM13 following message
Function module SD_REV_REC_VBREV_TABLES_POST
Status Update was terminated
Error Text : ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Thanks & Regards,
Sateesh.
Edited by: sateesh kumar on Mar 18, 2010 4:46 PMSo, is this a question or comment? If you search for SAPSQL_ARRAY_INSERT_DUPREC, I'll bet you'll find quite a few postings...the message says it all...an attempt was made to insert a record into a table with key column values that duplicate an entry that is already there. If the problem is repeatable, search SAP notes for relevant Notes, or find out if someone has done some enhancement/exit coding that is causing the problem.
-
Update was terminated occured when using different id
hi all,
when im using va21, when to save the document, i got update was terminated
System ID.... EN5
Client....... 801
User..... RAFIDAH_M
Transaction.. VA21
Update key... 4AA079B64CEA4392E1000000AC200115
Generated.... 04.09.2009, 10:52:09
Completed.... 04.09.2009, 10:52:10
Error info... TD 423: CONTROL_FORM
but why the other user not get the error message when he using the same document?
it is control by user id??
how to check?? please assist me...i click at SM13
User: RAFIDAH_M Client: 801 Transaction:VA21
Date: 08.09.2009Time: 11:49:47Report: SAPMV45A
Update key: 4AA4B237B9FE228BE1000000AC200115Status: Error (no retr
Number Module name (function) Type Status
1 HANDLE_TEXT_ARRAY_AFTER_COMMIT V1 Initial
2 RV_SALES_DOCUMENT_ADD V1 (no retry) Initial
3 SWE_EVENT_CREATE_IN_UPD_TASK V1 Initial
4 MCV_STATISTICS_UPD_V2_ORDER V2 Initial
5 STATUS_UPDATE V1 Initial
6 OBJECT_NUMBER_INSERT_VB V1 Initial
7 RV_MESSAGE_UPDATE V1 Error (no retry)
then double click at line 7
it showed
Function Module RV_MESSAGE_UPDATE
Status Update was terminated
Report LSTXCU05
Row 37
Error details Class: TD Number: 423
TD 423: CONTROL_FORM
i got to the program, line 37
i put the breakpoint at here but when to do again VA21 its not going here
if rstxc-tddebug = true.
perform debug_control_form using command.
endif.
if rstxc-tdopen = false.
call function 'SAPSCRIPT_MESSAGE_DEF'
exporting no = 423
v1 = 'CONTROL_FORM'.
perform exception.
message a423 with 'CONTROL_FORM' raising unopened.
endif.
if rstxc-tdclose = true.
call function 'SAPSCRIPT_MESSAGE_DEF'
exporting no = 443
v1 = 'CONTROL_FORM'.
perform exception.
message a443 with 'CONTROL_FORM' raising unstarted.
endif.
please xpert how should i do? -
Getting Express document 'Update was Terminated' in Call Transaction AS02
Hi All,
I've written BDC for changing the Asset Master using Call Transaction Method. After the Call Transaction it it showing me the Success message that 'The Asset has been Changed'.But it is not reflecting in the Database table.When i navigate back from th e screen I'm getting the Express document as 'Update was terminated'.
Please help me in this regard.
Thanks and Regards.Hi,
have you used commit statement after the call transaction statement, or if there is any enhancement for AS02 transaction remove the commit work statement from the enhancement.
Regards, Qamar
Maybe you are looking for
-
Where in migration process does old server stop functioning as primary server?
I am migrating from a SBS 2003 box to a new WS 2012 R2 Essentials box - following the instructions from "Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience". What I need to know is where in
-
Php mysql math error when using format(somenumber,2)
osx 10.5.2, php 5.2.5, mysql 5.0.51 (standard leopard desktop os install) Select format(myField,2) as someNumber from myTable ... returns data i would expect, formatted as you would expect. while looping through the data returned i am calculating a r
-
Why will MSN Live Mail not open in Safari
I can not get MSN Live Mail to open in Safari. I can MSN, but when I click on Hotmail it just keeps trying to load without getting anywhere?????
-
Sold to Party from Ship to Party
Hi, We have a requirement that when creating a service order, we need the sold to party to be determined when the ship to party is entered. Can someone pls tell how this can be achieved Points will be given Prachi
-
CS6 and EDGE : the SUITE question
Alright, sorry I posted a quesiton this morning and found the answer, i have to have CS6 to use lateste Edge Animate. What bugs me is that here it says (document created in May but updated lately it seems) http://www.adobe.com/devnet/digitalpublishin