UpdateContent issues,
Hi welcome to updateContent topic #894 ;)
Yes here it is again, another UpdateContent topic;
Ill try to explain what im trying to do.
I have a datapage wich is using spry data, and url params.
Im using the url params to choose from the dataset wich month
(for example) should be displayed.
when i gets the month it will fill up 3 dif tables with
information about the month. These tables are in a slidingpannel
div.
When all the data is loaded + html is almost loaded i use a
script to add the daynumbers to the TH's ( 1 to 31 depending on the
month ofcourse). So when the whole page is done with loading i have
a static page with all information i want to display.
Now there is a problem. this is what its all about.
the default spydata.js updatecontent doesnt read scripts. and
just gets the whole content from the page and stores it in the new
element.
So i used the new improoved version of
Spry.Utils.setInnerHTML (wich can be found in this topic:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadid =1306334&enterthread=y)
That spry Utils does read the scripts but it activates them
when the html is loaded in the new element. This is all nice and
stuff. But by doin this i cant use my spry utils to specify params
for dataset..
The solution is probly really simple, and infront of my
eyes.. i just need some1 who wants to smash my face to the monitor
and points me to the right direction ;)
If you reinstalled the OS again from Nokia, you may just have a defective phone and there could be something wrong with the hardware. I have two N9's and I haven't experience any of these problems.
Can you record these problems and post the link to youtube here so I can see what's happening?
I Choose Nokia!
Similar Messages
-
Issue with AutoSuggest + UpdateContent
Hi,
Using Spry.Utils.updateContent when I load part of a page
containing an AutoSuggest the AutoSuggest breaks.
Seems like the XML datasource is not fired in that case. If I
put the AutoSuggest code out of the destination DIV it works.
Click here to see what I
mean
I'm using v1.5. Any clue ? Thanks.I don't understand the actual results desired. But I would
make my cffunction returntype a string and get rid of the cfloop
that creates your array. One of my autosuggest cfcs is;
<cffunction name="getJobsearch" access="remote"
returnType="string" output="false">
<cfargument name="term" type="string"
required="false">
<cfset var Jqry = "">
<cfquery name="Jqry" datasource="taxsearchdb">
SELECT J.CompanyName + ' ' + J.CompanyCity + ' ' + C.State +
' ^' + cast(J.JobOrderNumber as varchar) as Jname
FROM jorder J, Companies C
WHERE J.CompanyNumber = C.CompanyRecordNumber and
J.CompanyName LIKE <cfqueryparam cfsqltype="cf_sql_var"
value="#trim(arguments.term)#%">
</cfquery>
<cfreturn ValueList(Jqry.Jname)>
</cffunction> -
Accordion - Ajax within accordion panel resize issue
Hi,
I'm in a little bit of a fix.
I have an accordion whose panels have ajax enabled regions
within them.
The ajax enabled regions have search forms which give a
search result within the same page (which is basically within the
panel as well) once a button is clicked.
My issue is that once I click search, my result set increases
the size of the page causing the accodion panel to enable a scroll
bar. Is there some way in which I can have spry resize the panel
instead of it enabling a scroll bar?
If I open and close the tab ofcourse, the region is resized
to cater to the search results as well with no scroll bar.
Incase this is not possible, is there a way to reopen the
selected panel on a page refresh event as all the tabs are closed
when a refresh occurs.
Thanks!
When the accordion opens up, it showsHi kundalani,
If you are using Spry.Utils.updateContent() to load the
contents of the panel, you can pass in a callback that sets the
height of the AccordionPanelContent to "auto" after the new content
has loaded:
function LoadContent(ele, url)
ele = Spry.$(ele);
Spry.Utils.updateContent(ele, url, function() {
ele.style.height = "auto"; });
<a href="#" onclick="LoadContent('e1p2',
'../../data/frag1.html'); return false;">Frag 1</a> |
<a href="#" onclick="LoadContent('e1p2',
'../../data/frag2.html'); return false;">Frag
2</a></p>
<p> </p>
<div id="example1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
<div class="AccordionPanelTab">Panel 1
</div>
<div id="e1p1" class="AccordionPanelContent">
<p>Panel 1</p>
</div>
</div>
<div class="AccordionPanel">
<div class="AccordionPanelTab">Panel 2
</div>
<div id="e1p2" class="AccordionPanelContent">
<p>Panel 2</p>
</div>
</div>
<div class="AccordionPanel">
<div class="AccordionPanelTab">Panel 3
</div>
<div id="e1p3" class="AccordionPanelContent">
<p>Panel 3</p>
</div>
</div>
<div class="AccordionPanel">
<div class="AccordionPanelTab">Panel 4
</div>
<div id="e1p4" class="AccordionPanelContent">
<p>Panel 4</p>
</div>
</div>
</div>
<script type="text/javascript">
var example1 = new Spry.Widget.Accordion("example1", {
useFixedPanelHeights: false });
</script>
--== Kin ==-- -
Spry.Utils.updateContent & IE caching pls help
Hi -
so ive read quite a few posts about this problem but no
single - comprehensive solution. Basically im using updateContent
to show and refresh a mini basket display on my ecom site. works
great in firefox but in IE7 the shopping basket apparently gets
cached the first time it gets updated and and then only updates the
cached version thus making it appear as if you havent actually
added anything to your cart. I know it's a cache issue cause I
clear the cache, re-updateContent, and the most current basket
state renders.
It seems like this should be documented somewhere - hopefully
someone can offer up a straightforward solution.
Cheers
AndyHi Andy,
By default Spry.Utils.updateContent() uses the "GET" method
for requesting a fragment from the server. What this means is that
you are at the mercy of the Browser's caching system and the
caching rules specified for that fragment by the Web Server. IE6,
not sure about IE7, also had a bug where even though the server
says don't cache my page, IE still insists on caching the page ...
a workaround was to append a query param to your URL that made the
URL unique, for example the local time:
Spry.Utils.updateContent(ele, "myfoo.php?id=12&curTime="
+ Date.now(), myCallback);
The other workaround is to use the "POST" method. Most
browsers don't cache results from a "POST" because that is what
most web applications use to fetch data that changes.
Spry.Utils.updateContent(ele, "myfoo.php?id=12", myCallback,
{ method: "POST" });
--== Kin ==-- -
User report issues in 1.1.0.21.97
A couple of issues i'm experiencing with user reports on Mac OS X in the latest pre-releas build
first off, if I am asked for a password (first time I use the connection) there is no feedback if the connection fails (worng password for instance)
The second problem I'm facing is every time I try to rerun a certain master-detail report I'm getting an NPE
this is the stacktrace:
22-nov-2006 15:37:31 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
22-nov-2006 15:37:33 oracle.dbtools.raptor.controls.display.DisplayResultTable getUI
INFO: DisplayResultTable.getUI()
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.report.addin.ReportEditor$1.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5554)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5319)
at java.awt.Container.processEvent(Container.java:2010)
at java.awt.Component.dispatchEventImpl(Component.java:4021)
at java.awt.Container.dispatchEventImpl(Container.java:2068)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
at java.awt.Container.dispatchEventImpl(Container.java:2054)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
reloadBuffers(): 53 nodes checked in 0.006489 second(s)
reloadBuffers(): 53 nodes checked in 0.005422 second(s)
reloadBuffers(): 53 nodes checked in 0.004306 second(s)
22-nov-2006 15:43:17 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
only happens with master-detail report
Message was edited by: Barsema
barsemaWe have verified the connection error on the latest evaluation build is working as expected. i.e. if you supply wrong password you get alerted to that. This has been verified on the windows and Mac OS X. Please try the latest evaluation release 1.1.0.22.71.
Your reports issue has also been addressed.
Sue -
Caching issues with IE and HTMLPanel and DataSet
I have a div
<div id="liw" class="HTMLPanel"></div>
var liw = new Spry.Widget.HTMLPanel("liw");
liw.loadContent("/subscriber/subscriber.py/getSubscriberHeader");
A python method that lives at
"/subscriber.py/getSubscriberHeader" this returns dynamic data
based on logged in value.
def getSubscriberHeader(req)
if isLoggedIn(req):
return "<p>Welcome User</p>"
else:
return "<p>You are not Logged In<form> login
form here </form></p>"
In Firefox when the user logs in with the login form and the
pages reloads they get the welcome message. In IE even forcing a
new page load using "ctrl F5" or "Shift reload" doesn't get the
welcome message. Only closing IE and reopening it will get me the
welcome message.
Is there anything I can do about this?
Another issue I have is with an Add/Browse page.
I use a dataset to get me all the info on a bunch of cast
members
var ds2 = new
Spry.Data.XMLDataSet("/admin/manage_cast.py/getCastMembers",
"data/row",{sortOnLoad:"stage_name",sortOrderOnLoad:"ascending",distinctOnLoad:true,useCa che:false});
I have a form in the same page that will add cast members to
the same database that "/admin/manage_cast.py/getCastMembers" reads
from.... when they add a new cast member in FireFox I see the new
person added after page reload.... in IE I do not see the new
person and I have to shut it down and open it to see the new data.
Is there anything I can do about this? I am setting
distinctOnLoad to true and useCache to false.For my dataset problem on the Add/Browse pages I forgot to
mention I have tried using:
updateContent
Spry.Data.updateRegion
Spry.Data.updateAllRegions
Once that dataset is loaded I am unable to get it to fetch a
newer version of the file, even with page reloads. -
Loading Tabbed Panels with the updateContent Util function
Hey,
Just wanted to see if anyone has had any issues while running
ThickBox Javascript and the updateContent function at the same
time.
On my site only 1 or the other will work... very confusing,
as my Javascript skills are minimal. Not sure what the clash is, I
thought it might be conflicting div id actions not being unique
enough, but it wasn't.
Anyone else?HI Kin,
I appreciate your quick reply. Actually I was using your old
code to rotate my tabbed panels and not the new one you posted. The
new one from your website works well with regular tabbed panels but
when trying it with a Spry data, it still doesn't work, the tabs
doesn't play at all...
I use the spry:repeat, I don't know if that makes a
difference.
http://demiurgical.fluctuation.net/development/test.html
based on the original Tabbed Panels with Spry Data
http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_sample2.html
I really appreciate your help!
Thanks,
John -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani -
Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampathHi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath -
HP LaserJet Enterprise 600 M602 driver issue
Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
AnatolyI am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Windows 7 displays error message when exiting +cursor issue
Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Dougfunction(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel -
Issue in Creation of Periodicals for Contracts in CRM7.0
Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
DedeepyaHi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C -
Issue in creation of plant related data at receiving server using BD10
Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05 matmas05
E1MARAM Master material general data (MARA)
Z1KLART KLART----
My extention
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT)
E1MARCM Master material C segment (MARC)
Z1AUSPM E1AUSPMDistribution of Classification:----
My extention
E1MARC1 Additional Fields for E1MARCM
E1MARDM Master material warehouse/batch segment (MARD)
E1MFHMM Master material production resource/tool (MFHM)
E1MPGDM Master material product group
E1MPOPM Master material forecast parameter
E1MPRWM Master material forecast value
E1MVEGM Master material total consumption
E1MVEUM Master material unplanned consumption
E1MKALM Master material production version
E1MARMM Master material units of measure (MARM)
E1MBEWM Master material material valuation (MBEW)
E1MLGNM Master material material data per warehouse number (MLGN)
E1MVKEM Master material sales data (MVKE)
E1MLANM Master material tax classification (MLAN)
E1MTXHM Master material long text header
E1CUCFG CU: Configuration data
E1UPSLINK Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PMCREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ? -
Issue in Creation of new Value Field in CO-PA
Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
SafiThanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi
Maybe you are looking for
-
Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition. We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are r
-
Email configuration error in OBIEE 11.1.1.6.2
Hi, I am getting the below error, while running the agent in obiee Eventually succeeded, but encountered and resolved errors... Number of skipped recipients: 3 of 4 AgentID: /users/weblogic/test agent [nQSError: 75025] Handshake failed when connectin
-
Videos in email have sound but no picture since I updated to Lion
I recently updated to Lion and now when I open videos in email I have sound but no picture.
-
Is there any way to run abap program in dialog process with process chain?
Hi. I just want to run custom abap program in every 30min. so I made process chain and connect abap program. but it returns NOTHING when background running. the program has ABSOLUETLY no problem when it's running DIALOG process. custom program is mod
-
How to create a multiple existing users in exch 2013
Hi Do you know how to add a multiple existing users in Exchange 2013,only permits add one user at time. I need add 200 users. In exchange 2007 and 2010 this feature is possible through the management console It´s possible in Exchange 2013?