Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.
Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Similar Messages
-
I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files. Big problem. What to do?
Simple:
File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
Regards
TD -
I have updated my iOS and now my hotmail will not verify my password through apple mail app. I have reset password - tried new password and old password and it still gives me password incorrect. Hotmail works fine on Mac. Has anyone had this difficulty and been able to resolve it?
Did you try deleting the mail account, then adding it back? I've read a lot of times that is what needs to happen in order for it to work properly.
-
hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.
- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Good Morning,
I just did a software update on my phone (finally) last night and now my phone will not come on. It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYONE help me please???The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.
-
I have a new wireless router and now my laptop will not recognize the printer.
I recently installed a new wireless router,Linksys E2500, and now my laptop will not connect to my OfficeJet 4500 wireless printer. Operating system is Windows XP. Says it does not recognize the printer. It was working fine with my other Linksys router and I have been able to connect all of my other electronic equipment. Thanks.
You must reinstall the full feature software and drivers again to be sure it will work with the new router. This is the fastest way. Simply follow the instructions that came with the printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
HT4528 I installed the update on my phone and now my phone will not turn on
I installed the update on my phone and now my phone will not turn on
I installed the update on my phone and now my phone will not turn on
-
Did a restore, and now my iPhone will not activate, though the iOS activation server seems to be "green"
SIM card is inserted, connected to wifi, and connected to iTunes though it tells me it is "unable to continue at this time"
Any other solutions?Hi JG14usa,
Welcome to the Apple Support Communities!
I understand that you attempted an update on your daughter’s iPhone but the update will not complete. For this type of situation, it may be necessary to place your iPhone into recovery mode and restore. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe -
Hello all
I upgraded from Snow Leopard to the latest Mountain Lion OS and now my Wifi will not work. When I try and insert the password to my Wifi network states either 'connection timed out' or 'password and/or user name not recognised' please help...!Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
From the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain. -
I updated my iOS system 2 Days ago. App store says I have 20 updates, when I click update all, they all go in to "Waiting" mode and its been like that for 24 hours now with no sign of updating. Do I have to delete them all and reinstall ? any help much apreciated.
Snafujafo wrote:
Dear ED3K:
First: I hope you don't work for Apple as you have some poor communication skills in assistance. That said, I would never in a million years pay you 45 dollars to help me. I think I would sleep with Satan first!!
No one here works for Apple. This is a user-to-user technical support forum. Everyone here is a volunteer. You tend to get from this forum what you bring to it. If you come in ranting and raving and saying you're going to throw your iPhone out the window and that Apple is mean, people are not likely to respond to you with sweetness and light and puppies and kittens.
If you really want help, I'd suggest you take a deep breath and then start a new thread in which you explain the problems you're having, the steps you've taken to resolve the problems, any error messages you've gotten. Stick to the facts. Check the attitude and emotion at the door. People will do their best to help you.
Best of luck. -
How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.
Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual. -
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
1. Shut down the computer
2. Reboot and open firefox
3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
6. Once it finally opens, backup your bookmarks,
7. Download a copy of firefox from there website
8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
9. install the new copy and BOOM! it works
If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck! -
I had 3 versions of FF and had to redo the HD and now no version will install says "Can't open output file" i have winddows 7 64 bit 8 GB memory and 1T HD but i have it on my other desktop and laptop with less memory and HD space and works fine laptop has windows 7 64 bit and other desktop hook to my 32" tv has win 7 32-bit i lso did clean removal of all versions of FF and did new DLs with screen shots of it DLing, complete of DL and after i got the error again.
i am posting this as a reply due to it would not allow me to attach screen shots except for this way
-
I just updated my iPhone to the 5.0 OS and now all of my calander events are gone. How do I get them back?? Any help/advice is welcome!
Did you restore your phone with itunes or check new phone. You can always reconnect with itunes and restore your phone to old settings and it should replace everything because it is on your computer
-
I just did a restore to my new iPhone 6 from iTunes and now my phone will not turn on at all. How do I get it to re-start?
Hi denise mfrompalatine,
If your iPhone won't turn on, try the steps in the resource below:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
Hope that helps ...
- Judy
Maybe you are looking for
-
How do I save a scanned document as a PDF file?
How can I save a scanned document as a PDF file. I'm using a Photosmart C6280. This question was solved. View Solution.
-
Standard IDOC for Account postings
Hi Guys, As of now we are using the Standard program RFBIBL00 for posting the accounts into SAP and RSBDCSUB for executing the Session.I would like to know if we have any Standard IDOC which acheives the same functionality for posting the accounts in
-
I am used to doing color correcting in Photoshop with the color info/eyedropper set to CMYK. Converting a RGB image to CMYK that has purple or orange is always disappointing. So I like seeing the orange and purple slider, but why doesn't Lightroom ha
-
Brand new just out of the box(that's me and the Ipad). I have carried out sync process to PC Itunes. All present on PC but not now on IPad. Status bar showing audio and video content on device, but when entering folders they are empty. What did i do
-
I purchased the Education Edition CS6 software. How many computers can I put it on? Thanks.