Updated to Lion and can't access my own website?

I recently update to Lion and now I can't access my own website, no matter what browser I use.
I can access the site fine from my work PC, but can't from home and this started after I updated to Lion.
Help?

Shawnnafromwa wrote:
I created it using Wordpress.  It is hosted by Accuweb.
http://www.shawnna.org
I can't access my cPanel or just the website itself.  I can't access the admin panel for the Wordpress workings either.
And it all worked fine until I updated to Lion.
Any help you can provider would be very helpful.  My host is claiming they can access it fine so they aren't able to help.  They verified my IP isn't blocked on their end.
And I can access it straight away in Safari.Do you have any anti-virus or third party programs, especially secrity related installed?
Can you access any other sites you regularly go to?
Is your Wordpress program up to date to be compatable with Lion (check developer's site)
Pete

Similar Messages

  • HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works 

    Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works  can you help

    Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

  • I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine".  I need the back up data that I could access on my old mac book pro (that is now broken). Tnx so much

    I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine".  I need the back up data that I could access on my old mac book pro (that is now broken). I can only access time machine  back up data that I've obtained since starting the new mac book pro.  Tnx so much

    Try doing a click-and-hold on the Time Machine icon in the Dock, then select "Browse Other Time Machine Disks".
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • Updated to Maverick and can't access my iCloud email acct.  It keeps telling me I'm not logged on but I am when I open preferences.  Please help.

    Updated to Maverick and can't access my iCloud email acct.  It keeps telling me I'm not logged on but I am when I open preferences.  Please help.

    I too have the same problem. Can anyone help?

  • Can't Access My Own Website when using TMobile phone as Modem

    I am using my Nokia 5310 as a bluetooth modem through TMobile on my MacBook. When I try to access my own website, it redirects me to a address that says, "Great Success! Apache is working on your website..." and so on. However, when I disconnect the modem and use my airport bluetooth connection I can get to my site immediately. I've tried rebooting my MacBook, pulling the battery out of the phone, refreshing the browser, emptying the cache, all to no avail. I called Tmobile and got their "Tier 3" people who said it's not from their side but could not give me any real reason it's doing this. They reconfigured my settings to see if that would work but it didn't.
    I can access all other sites but my own website. I tried Firefox and got the same conclusion.
    If it's the computer why would I be able to get to my site when I use my airport? If it's the phone, why would I be able to access the site through the web browser on my phone?
    Does anyone have any suggestions on how to correct this problem? Thanks in advance for your help!

    Hi halacious, and a warm welcome to the forums!
    Airport & Bluetooth are two separate Interfaces, so that is a bit confusing.
    Where is this Website hosted? Locally on your own machine, or on the Internet?
    Any Router involved there?

  • I updated to Mountain Lion and can't access most of my photo libraries , both Aperture and iPhoto

    After updatiing yesterday I cant access my libraries, I get two different messages, one says :"Aperture can't access this Library' "to use this library , make sure its file permissions are set correctly".  The next one says "Unable to write to library iPhoto Library 2
    check that you have permissions to write to the library directory.Any ideas what I have to do tho get access again.

    I have been having the same issue, although the external drive is not an array. It's a multi-disk setup where the drives are manually duplicated using Super Duper, although it could be set up as an array. The suggestion to remove the external drive(s) from the system, spinning them down, then plugging them in worked ONCE. After that, the next time Aperture was relaunced, the problem resumed. And now spinning them down or taking them out and restarting them, even restarting the Mac, has no effect. I'm testing to see if moving the Libraries to another drive and reformatting the drives in this external enclosure before bringing the libraries back will have an remedy. It may be there needs to be a firmware update to the external enclosure in order to work properly with Mountain Lion.

  • Can't access my own website and manage it using Safari!! Very annoying! _

    If anyone can help me or give me an answer that would be great and highly appreciated! I am new to Mac!!!
    I am having trouble accessing my own online shop as Safari doesn't support Java Script or something like that (i know nothing about it)? I can see it but once logged into the site to manage it, the buttons wont click (am I making sense?)
    Even accessing Ebay is giving me trouble as well!!! Like I can't see what I am posting and how it looks in Ebay when writing up the description!! I have to use either Firefox or IE on another computer to write them and post them. I am really getting mad!!!! Can someone give me a solution??
    Please I need help desperately!!

    Hi
    Welcome to Apple Discussions and Mac Computing
    Safari does support Javascript. However, it's possible the coding for your Online shop is using a version of JS not compatible with Safari and possibly the Mac Platform.
    To be sure Safari is set up to access JS content, go to your Safari Menu (next to the Apple logo in the upper left of your monitor)>Preferences (a short cut for preferences for most applications is pressing the Command and , keys). When Safari Preference opens, click on the Security panel (if you don't see multiple panels listed, click on the small pill button in the upper right of the Preference panel). Make sure the 4 WebContent boxes are checked.
    Try your web site. If no success, post the URL of your web site here and I'll be glad to try it.
    eBay is a different story. The site is not the friendliest for Safari due to their odd approach to site coding, especially for Sellers. From what others have posted in this forum, using Firefox is a better alternative when listing/posting product.
    Safari is quite strict about following industry standards promulgated by the Web Standards Project. In part, this endeavor strives to create uniformity and better security on the Internet through specific guidelines for site coding.
    Unfortunately, sloppy coding practices exist on some sites, creating functional challenges for browsers. Also, as Microsoft's Internet Explorer is used by a majority of PC owners (certainly not because it's a quality product), some web developers tend to code sites specific to IE without considering whether other browsers can render the content. Besides being very short-sighted, this type of work devalues the use of the Internet as a viable and secure structure for communication and commerce.
    The good news about owning a Mac is the lack of viruses, spy and malware, and poorly constructed operating systems such as Windows Vista and XP. Working around Mac-bias, when encountered, is the primary challenge.

  • Weird wrt54g problem-can't access my own website

    I maintain a website through hosting service go daddy.  I use Frontpage XP to maintain this website.  My computer is WindowsXP pro.  I have the wrt54g version3 router with v4.30.5, Apr. 27, 2006 firmware.  Now for the weird part, I can access all web addresses fine, except for the website I maintain.  If I bypass the router, the website loads perfectly.  If I have the router installed, the website doesn't load at all, or if it does load, it doesn't load correctly.  I have tried resetting the router back to factory defaults,rebooting and praying.  I have called both my ISP and Go Daddy and they both say I am having a router issue. I have called thre of my freinds and they are all able to access the website without any problems.
    Any Ideas?
    DR_K

    Check the MTU on the Status tab. Open a command prompt and ping your website with a packet size 28 lower than the MTU. If your MTU is 1454 then 1454-28=1426. Thus type:
    ping -f -l 1426 www.uawlocal1485.org
    It should go through. Then try to increase the value in the ping by 2.
    ping -f -l 1428 www.uawlocal1485.org
    It should not go through. If the first one does not go through, you have to lower the MTU in the router. Decrease the value in the ping until you find a value that works. Increase that value by 28 and use that as MTU in your router.

  • Using FF 3.6.13 and get 406 error and can't view my own website, other browser work fine

    All of a sudden I get this error, 406 Not Acceptable
    An appropriate representation of the requested resource /postersschool.html could not be found on this server.
    Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

    Hi halacious, and a warm welcome to the forums!
    Airport & Bluetooth are two separate Interfaces, so that is a bit confusing.
    Where is this Website hosted? Locally on your own machine, or on the Internet?
    Any Router involved there?

  • Updated to OSX Lion and about 3 days later I can't acces my own website

    Updated to OSX Lion and about 3 days later I can't acces my own website from my computer, but it works on other computers. Using a java wordpress site, can't even access my admin panel. Anybody else have this problem. What might have caused this. Even tried reinstall Lion, no success

    Shawnnafromwa wrote:
    I created it using Wordpress.  It is hosted by Accuweb.
    http://www.shawnna.org
    I can't access my cPanel or just the website itself.  I can't access the admin panel for the Wordpress workings either.
    And it all worked fine until I updated to Lion.
    Any help you can provider would be very helpful.  My host is claiming they can access it fine so they aren't able to help.  They verified my IP isn't blocked on their end.
    And I can access it straight away in Safari.Do you have any anti-virus or third party programs, especially secrity related installed?
    Can you access any other sites you regularly go to?
    Is your Wordpress program up to date to be compatable with Lion (check developer's site)
    Pete

  • I updated to Lion, and all of my events show up, but I cannot "add invitees" to any event. I can accept/reject invites, but cannot create them myself.

    Help!  updated to Lion, and all of my events show up, but I cannot "add invitees" to any event. I can accept/reject invites, but cannot create them myself.

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • Cannot backup since updating to Lion: sparsebundle can't be accessed

    Since I updated to Lion, I can no longer back up to my TimeCapsule. All I get is this message
    "Time Machine could not complete the backup.
    The backup disk image “/Volumes/Data/xxxxx’s iMac.sparsebundle” could not be accessed (error -1)."
    And the Time Machine indicates latest backup as "Delayed" citing a "Time Machine error", and the same detail as above, "error-1".
    I have another Mac that I have NOT upgraded to Lion, and it continues to backup to the same TimeCapsule drive unimpeded. I can't find a solution for this problem in Lion. I hope somone has an answer. I'd really like to re-access my old backups, but I'll be happy enough if I can just make a new backup.
    Lion seemed great but this is a pretty serious problem. If my iMac crashes without a working backup - I'm completely hosed.

    I found out that this particular error has nothing to do with Lion 10.7.1. My TimeMachine is simply trying to access a backup sparsbundle from a different account on this computer that is no longer used and it can't do it (I suspect because the data and user doesn't match up). I deleted that one. TimeMachine then tried to "inherit" the sparsebundle backup from another computer which I migrated to this computer (its all the same data, just from a different Mac), which also failed. So, I had to try to transfer the sparsebundle to save it, but it's too big to put anywhere (if I had an extra 900 GB drive laying around I could do it...), so I simply deleted it (which took all night to process) and am running a new backup now (which is supposed to take "about 7 hours"! - and by the way, the large sparsebundle is still in the process of deleting after 8 hours, so if you do this too, be very patient). Success!

  • HT1386 I updated my daughters iPod Touch and now the music states is it now stored on iCloud and can be accessed on WiFi or cellular.  There is no music stored on the iPod and she listens to it outside of the home without WiFi.  I will not let me sync.

    I updated my daughter iPod touch.   Now the music states that it is on iCloud and can be accessed using WiFi or cellular.   I need to move the music back on the iPod so that she can listen to it without WiFi.   I tried to Restore backup but still does not work.   I tried to sync, still does not work.

    Is the music in your iTunes library?
    Why can't you sync?
    You said "Now the music states that it is on iCloud and can be accessed using WiFi or cellular."
    where does it state that?
    Just redownload them from iCloud to the computer and the iPod by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • After updating to Lion (and 10.7.1) I can't use my external CD/DVD writer (samsung SE-S084D).  iTunes says no cd software installed?  What to do?

    I recently updated to Lion and now my external CD/DVD player (a samsung SE-S084D) won't work.  I can't burn CDs and iTunes says no cd software is installed.  The drive worked like a top in all flavors of 10.6.  Anyone know what do to?  The drivers for the drive--which I didn't need in 10.6--are all .exe files, so I'm out of luck there.
    Thanks!

    No.  The only way I finally got it to work was after about 5 restarts.  I've never seen iTunes flip out like that before.

  • I downloaded the recent software update Mountain Lion and now my microsoft word, powerpoint, etc. are no longer supported. Why is this? What can I do?

    I downloaded the recent software update Mountain Lion and now my microsoft word, powerpoint, etc. are no longer supported. Why is this? What can I do?

    Depending upon how extensive your library of legacy Microsoft Office data files are, you may want to consider continuing to use Microsoft Office 2004.
    Microsoft Office's 2011 version is compatible with Lion and presumably either works with Mountain Lion or an update will make it so.  The problem with this approach is that Office 2011 will "convert" your earlier data files and there lies the rub!  For example, I have the need to weekly open a chart created in Excel 2004, but Excel 2011 trashes the chart in its "conversion."
    So I have approached the overall problem differently.
    The reason your applications do not work in Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006.  When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
    Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
    The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
    So for those of use that need to run Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
                             [click on images to enlarge]
    And now Mountain Lion:
    Full Snow Leopard installation instructions into Parallels 7 are here:
    http://forums.macrumors.com/showthread.php?t=1365439
    Snow Leopard is $29 and Parallels 7 is $79 retail (cheaper from competitive sources) and Parallels offers a 14 day free trial of Parallels 7 on their website:
    http://www.parallels.com/download/desktop/

Maybe you are looking for

  • Can you delete some conversations in imessage and not all?

    Can you delete some of the conversations in Messages from one persons. Or must you delete all?

  • Moving music and photos from external drive

    Bought a new 27inch iMac for Xmas this week. Today my G5 imac wouldn't boot and has a video RAM error code 2NYD/1/4:2103 and I can't boot in safe mode or from and external drive with carbon copy cloner backup. I am resigned to the G5 being toast. Thi

  • How can I have IMessage and SMS in the same thread

    My boyfriend has an iPad mini and a non Apple phone that sends SMS.  I know have two separate threads in messages, one for iMessage and one for SMS.  Even though I have added his email that is used to send iMessages to his contact on my phone, it is

  • Can we render EP on mobile devices?

    We are planning to build a Mobile Portal (EP6) for hand-held devices. Can the Enterprise Portal be configured to be viewable on mobile devices? Currently it displays a message that 'iView is not compatible'. Are there some specific documents that can

  • ChaRM Project Phases - configuring what can be done during phases

    Hi This is a pretty simple question. Where do I change what actions can be completed during phases? For example, a ZMCR for a Maintenance Project can be created in Development with Release phase but it cannot be created in Go-Live phase. Where do I v