Updated to lion usb devices not being recoqnized

After going to the apple store in Cardiff Wales i had a fresh computer OS wise ( its a early edition 2008 mac book pro )but cant seem to get the usb to pick up my Nikon camera. found the devises in Finder but it is not showing any thing plugged in ,,, this is a APple reload of the new Lion 10.7.2 and all updates. any one know what im doing wrong ? seems like theres a few things that dont work either ,, ie the back lite to the key board and the screen brightness.

I know you said you searched the wiki and forums, but have you seen this?
http://wiki.archlinux.org/index.php/Firefox#Fonts

Similar Messages

Is anyone using VMware fusion and having trouble with USB devices not being recognised

I have an Terratec Axon AX50 Guitar to Midi interface. The editor software is not Lion compatible so I have attempted to run that bit in Windows 7 on a virtual machine.
The problem is that the VM machine will not recognise the USB device, even though when it asks which machine I want to connect to it names the device correctly.
Any Ideas ?

Device not recognized by iTune
http://support.apple.com/kb/TS1591

USB Devices not being mounted

I have attempted to connect both my digital camera and iPhone, and neither have worked. Unfortunately, I can't find my camera lead, but I do have my phone. This is the output of journalctl:
May 14 20:11:34 anon kernel: usb 3-9: new high-speed USB device number 35 using xhci_hcd
May 14 20:11:34 anon kernel: usb 3-9: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon kernel: usb 3-9: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon mtp-probe[10722]: checking bus 3, device 35: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9"
May 14 20:11:34 anon mtp-probe[10722]: bus: 3, device: 35 was not an MTP device
May 14 20:11:34 anon baloo_file[814]: "/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9"
May 14 20:11:34 anon baloo_file[814]: QObject::connect: Cannot connect (null)::accessibilityChanged(bool,QString) to Baloo::StorageDevices::slotAccessibilityChanged(bool,QString)
May 14 20:11:34 anon kdeinit5[748]: QObject::connect: invalid null parameter
May 14 20:11:34 anon systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Input/output error
May 14 20:11:34 anon systemd[1]: Started Socket daemon for the usbmux protocol used by Apple devices.
May 14 20:11:34 anon systemd[1]: Starting Socket daemon for the usbmux protocol used by Apple devices...
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.696][3] usbmuxd v1.1.0 starting up
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.697][3] Successfully dropped privileges to 'usbmux'
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.698][3] Could not get old configuration descriptor for device 3-35: -5
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon kernel: usb 3-9: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon kernel: usb 3-9: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon colord[402]: (colord:402): Cd-WARNING **: CdMain: failed to emit DeviceAdded: failed to register object: An object is already exported for the interface org.freedesktop.ColorManager.Device at /org/freedesktop/Co
May 14 20:11:34 anon colord[402]: (colord:402): Cd-WARNING **: CdMain: failed to emit DeviceAdded: failed to register object: An object is already exported for the interface org.freedesktop.ColorManager.Device at /org/freedesktop/Co
May 14 20:11:34 anon kernel: ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached
May 14 20:11:34 anon kernel: ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.778][3] Connecting to new device on location 0x30023 as ID 1
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.778][3] Initialization complete
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.778][3] Enabled exit on SIGUSR1 if no devices are attached. Start a new instance with "--exit" to trigger.
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.779][3] Connected to v2.0 device 1 on location 0x30023 with serial number xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
May 14 20:11:34 anon baloo_file[814]: "/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:4.2/net/enp0s20u9c4i2"
May 14 20:11:34 anon kdeinit5[748]: QObject::connect: invalid null parameter
May 14 20:11:34 anon baloo_file[814]: QObject::connect: Cannot connect (null)::accessibilityChanged(bool,QString) to Baloo::StorageDevices::slotAccessibilityChanged(bool,QString)
May 14 20:11:34 anon systemd-udevd[10739]: Assertion 'path' failed at src/login/logind-acl.c:72, function devnode_acl(). Aborting.
May 14 20:11:34 anon systemd-udevd[214]: worker [10739] terminated by signal 6 (Aborted)
May 14 20:11:34 anon systemd-udevd[214]: worker [10739] failed while handling '/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:4.2/net/enp0s20u9c4i2'
May 14 20:11:34 anon systemd-coredump[10745]: Process 10739 (systemd-udevd) of user 0 dumped core.
May 14 20:11:35 anon org.gtk.Private.AfcVolumeMonitor[712]: creating volume for device uuid 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'

So, I can view the files on the iphone when using an "Open" dialog in a GTK app, but not in Qt or any other apps. I'm using Plasma 5 desktop, accessing files and mounting with Dolphin
lsblk doesn't change, it remains as:
sda 8:0 0 232.9G 0 disk
├─sda1 8:1 0 512M 0 part /boot
├─sda2 8:2 0 67.8G 0 part /
└─sda3 8:3 0 164.6G 0 part /home
sdb 8:16 0 2.7T 0 disk
├─sdb1 8:17 0 1.8T 0 part /run/media/anon/c66655000
├─sdb2 8:18 0 488.3G 0 part
└─sdb3 8:19 0 488.3G 0 part
sr0 11:0 1 1024M 0 rom
Last edited by joshy_15 (2015-05-15 09:49:00)

USB Devices not being detected

I have a couple of problems i've been struggling with for a while, searching the forums to no avail.
1)
Firefox's UI font sucks.
Here it is compared to Thunar:
EDIT: Fixed. I had anti aliasing Disabled in .font.conf
2)
USB devices aren't autodetected after I start X.
i.e. if i plug my mouse before logging in (shell) and starting x, it works, but if i wait till later, it doesn't.
I don't think usb drives are being detected either, but I can't figure out how to try to mount them either. I would like to have automounting of usb drives and autodetection of usb peripherals.
Thanks
Last edited by underpenguin (2008-02-06 02:14:04)

I know you said you searched the wiki and forums, but have you seen this?
http://wiki.archlinux.org/index.php/Firefox#Fonts

Qosmio F10 - USB devices not being recognised properly

Hi there,
I've been having major problems with the USB ports of my Qosmio F10. When ever I try to plug in a USB device, the F10 recognises there is something there, but always categorises it as an unknown device. For example, everytime I try to attach a USB mouse, it does not instantly recognise it, even after previously having gone into the device manager and manually installing a driver.
This has been the case since I bought the laptop 5 months ago, but I cant ignore it any longer.
I have already tried :
- uninstalling all USB controller and hub drivers and reinstalling
- making sure that power save for the usb devices was not ticked
-ticking "install software anyway" in the driver signing options
When I open up device manager my USB looks like this
- Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller - 24CD
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C2
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C4
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C7
-USB Root Hub
-USB Root Hub
-USB Root Hub
-USB Root Hub
Any help on this is much appreciated as its driving me nuts :-)

Hi
I agree with Jack. You have suggested that the USB devices were recognized but as an unknown device. In this case the device drivers are needed.
Which USB devices did you connect?
Sometimes some USB devices cannot be recognised properly because of the low power of the USB ports. If the USB device needs more power than 500mA standard power the OS could has some problems with the recognition.
In this case you need a external power supply or a USB hub with the power supply.

Usb devices not being recognised

hello my external devices such as my printer or edirol sound recoreder are not appearing on my desktop when i plug them in. After seeking advice i have located them in the system profiler (usb part) and it can read and recognises them. however i do not know what to do next does anyone know what to do as i have no idea and really need it to work for my uni work, please help cheers

First welcome to the discussions.
Most USB periperals come with either Cd or software to run them. Printers, Scanners, Cameras, and some don't.
Each one can be a little differnt. I will use a Printer, If it is compatible.(OSX has some drivers installed to use these devices but not for all.)
First let's start from scratch pull the power on your printer, and wait a minute or so. Plug it back in and restart your computer.Make sure the USB is plugged in when you do this, This will reset the printer and the computer.
place the disc that came with the printer in and Install the software, as soon as you are done go to your printer manufactures site and search for the latest download for your Printer and Operating system. Download it.
Go to your Mac HD and then Applications folder and you will see a folder that matches your printer,drag the folder you downloaded from there site to this folder and double click it inside that folder. Depending this printer folder can be named different things, such as (HP952c Printer) or set up or Install. It can also be located in the Utility folder.
Open it and see if there is an Install option. click it and launch it.
This may seem a little confusing, but it's not really,
Most people have problems with one of a couple a different things.
Either there printer isn't compatibble,
Or they havent opend the folder in the Applications, or Utility folder to launch there printer drivers.
After you read this it should be pretty easy for you. Come back and tell us if this helped. Don

Wmdc usb device not recognized

I am have a 800w and when o connect to my computer withing the 1sync it get disconnected error message on my computer
USB device not being recognized due to a malfunction
has anyone got the error message ? is there a fix for this
Post relates to: Treo 800w (Sprint)

Hi phonedrn8,
The only think I can think of is if you don't have the right version of WMDC. The WMDC package has the USB driver bundled with it. If you're using Vista 64-bit and you use the 32-bit WMDC, this error would likely occur. To check your version of Vista, click the Start Menu, right click Comptuer, and select Properties. About 2/3 of the way down the new window, it'll tell you 32 or 64 bit.
Then, head over to http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx#download and make sure you download the version that's correct for your system.
Post relates to: None

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

Work through all the suggestions in this Apple support document first.
iPod: Does not appear in Windows or iTunes and Device Manager is empty
B-rock

I was updating my iPhone 5S, suddenly the screen went black and now it won't turn on. Plugged it into my computer and it said "USB Device not recognized..." HELP!!

I just went to update my iPhone 5S as it asked me to, and it got to the point with the apple logo on the screen and the black loading bar underneath, but then the screen went black and the phone now won't turn on? I went to plug it into my computer and it said "USB Device not recognised"..
PLEASE HELP ME! It's 1am here in england, I need to be up at 6am for work and won't be able to get up without an alarm... my only option is so stay awake!

Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?

HP G60-630US Notebook - Webcam is unknown device + USB device not recognized pop ups [update]

My webcam and everything was working fine last night. I even used my webcam on the new yahoo I had installed a few days before. When I got up this morning and turned on my laptop, I kept getting pop ups every 3 minutes stating USB device not recognized despite not having anything plugged. I check out device manager and see an unknown device and Imaging Devices missing. When I try to go into youcam, it tells me that the cam isn't detected.
My laptop is HP G60-630US Notebook PC, Windows 7 Home Premium 64 Bit.
There were no changes made last night. Although after all this I tried removing all of the usb and rebooting, but nothing worked. I am still getting the frequent pop ups. PLEASE any help would be appreciated.
Update: I just ran the Bios update and instead of unknown device, it says USB composite device
This question was solved.
View Solution.

Try this
Use device manager to manually install the webcam driver, Open Device Manager, right click on the unknown image device and select "Update Driver" then "Browse my computer for driver software", then "let me pick from a list of device drivers on my computer" then click the "Have Disk" button, then click the "browse" button, browse to "C:\Windows\inf" folder and find "usbvideo.inf" and select it , then hit OK, drivers should load.

USB Device Not Recognized - Caused by iTunes Update???

I have been reviewing the posts associated with USB Device Not Recognized and many persons have had this problem, but most are within the past 10-12 days. My problem started after installing an iTunes update.
Can Apple please advise if the latest iTunes update interacts with Windows to cause this problem (which remains even after iTunes is uninstalled).

Check if any of the tips in this thread can help you.
http://talk.sonymobile.com/message/328564#328564
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Itouch - USB device not recognized and Itouch now no longer works

I'm now on my 3rd Itouch since December all due to the same problem. All seemed to be going well with my 3rd replacement Itouch. Having loaded most of my cd collection into ITunes the night before I was going on holiday I synced my Itouch. Some sort of automatic download took place I think from Microsoft and suggested my drivers were being updated. Next thing I got message to restore my Itouch to factory settings. I did this and all the problems I had with my previou Itouch's started again.
When I now plug my Itouch into my laptop it says "USB device not recognized" and the Itouch will not switch on. I've done everything including reinstalling Itunes, holding down the power and home key but to no avail. Looks like I'm going to have to send my Itouch back again. I have a suspicion that a Microsoft download is corrupting the drivers. If anyone can help I would be very grateful. I really like my Itouch but the fact it keeps failing leads me to wonder if I should opt for something else.

I had success with the holding down the keys and connecting to usb and using itunes to restore firmware like they show here
http://support.apple.com/kb/HT1808
the showing the usb thingy on the screen part

4th generation shuffle "USB Device Not Recognized"

After a trip to the Apple Store with my iPod in which they diagnosed my iPod as being a "dud," I happily came home to plug in my new iPod, which...LOW AND BEHOLD...displayed the same issues. Here is what is happening:
1. I plug in my iPod Shuffle to my HP Pavilion running Windows 7.
2. I hear that noise (boo-boop)recognizing that a device has been plugged into my USB drive.
3. A message pops up in the right-hand corner of my computer that reads, "USB Device Not Recognized" at which point I click for more information.
4. The detailed view shows the following message: "Windows has stopped this device because it has reported problems. (Code 43)"
What I've already tried:
1. Uninstalling and Re-installing all of the drivers under the Universal Serial Bus Controller in the Device Manager.
2. Running updates on iTunes and on my Windows Operating System.
3. Updating iPod drivers.
PLEASE HELP! I am frustrated. I had a 2nd generation Nano that was stolen out of my car, but it worked fine for years. Also had an old shuffle (2nd generation) that worked fine with this computer/operating system. Any advice helps, I don't want to wait another 2 hours at the Apple Store only to be sent home with another device that doesn't work with my computer.

Did you try this:
http://support.apple.com/kb/ht1925
It sounds like the Apple USB stuff is your problem. I would just do the full uniinstall and reinstall.
Make sure you connect directly to computer, not through a USB hub.
If none of that solves the problem, try creating a new user and see if it works when you log on as that new user. If it does work, you know you have something installed on your normal account that is fooling with the iPod.
i

Ipod not recognised by Windows, USB device not recognised

Hi hope someone can help
I have recently received my ipod back from Applecare who have sent the ipod back in ' working order ' but it will no longer be recognised by my windows. It says USB device not recognised and i cant find, nor will it install drivers that i located on the ipod updater etc.
I have tried several methods on this forum but none seem to work.
The letter from mycare says the iPod is formatted for a computer operating Mac OS X. Although i stated wi use Windows. But the leter states this can be changed bu installing the updater, but this wont make a diff as comp still wont regonise the device after i have followed there instructions. Any advice?
Thanks

I'm not really up on the complexities of the Windows OS but try this tip I picked up a while back, hopefully it might help.
"USB Device not Recognized in Windows".
1. On the Start menu, click Control Panel.
2. Double-click the System icon.
3. Click the Hardware tab.
4. Click Device Manager.
5. Scroll down the list of devices to the Universal Serial Bus controllers
6. Click the plus icon next to the Universal Serial Bus controllers.
7. Double-click one of the indented USB Root Hub entries.
8. Click the Power Management tab.
9. Deselect the "Allow the computer to turn off this device to save power" option.
10. Click the OK button at the bottom of the window.
11. Restart the computer.

USB Device Not Recognized

Operating system: Windows Vista
Error: USB Device not recognized
While actively on the computer, we suddenly got a message stating that the USB Device was not recognized. The only thing plugged in to the USB port was a mouse. Tried all the ports, same message. Tried another mouse, same thing. Tried a thumb drive, and low and behold, 2 of the 3 USB ports worked. Tried a URL from MS which is supposed to help with this exact problem and possibly fix it: http://windows.microsoft.com/en-us/windows-vista/Tips-for-solving-problems-with-USB-devices
This didn't work.
Contacted HP support and they wanted me to restore back to a restore point as well as updating my BIOS. After searching the issue more extensively using Google, I found that several people said to do this:
Shut down the computer
Remove the power plug
Remove the battery
Put the battery back in
Power up the computer (without the power plug)
This forces a hard reset.
Almost as if by magic, the problem disappeared. A much simpler and less technical solution to the problem than what HP recommended!!!!

Hi @yani1015,
Welcome to the HP Support Forums! I see when you were installing your HP Printer you got a message on your Computer saying 'USB Device not Recognized.' To better assist you can you leave me with the following information:
1. What is the Exact model of HP Printer you are using?
2. What is your current Operating system, Windows or Mac and which version?
3. Were you able to install the printer?
4. Did you plug in the USB prior to the software prompting you to?
Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know what the PSDR finds, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Updated to lion usb devices not being recoqnized

Similar Messages

Maybe you are looking for