Updater Won't Install ?!

For months I keep getting messages that I need to install updates ... I use CS6 ... with my MacAir running 10.9.1 with it's Thunderbolt monitor.
But when I try to do that I get this message":
But after I download a new copy of App Manager ... it wont' install. It does nothing ?
I get this:
The I try to Install Support Advisor ... as advised ... and get this:
I've run through this a number of times over the last few months ?!
Reading about other's issues, most of you are a lot more tech savvy then me!
So ... what do I do ... in layman's terms?
THANKS!

Unbelievable! So I turn the error messages into jpegs so I can upload them to illustrate the issues ... because it won't allow me to upload the .png's ... but it won't allow me to upload the jpegs ... so I describe each message in Edit.
THEN when I hit Update I get ... "Unauthoried, You do not have permission to post in this forum." "It appears you're not allowed to view what you requested"
Is this a ploy to force people to use the cloud subscription service?

Similar Messages

Windows updates won't install

Hello,
I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
any more information.
I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
anything in Even Viewer or Reliability Monitor either.
What could it be?
Thanks.
Chris Hansen

Hi Chris,
Firstly, please check if those Windows Update have already installed:
1. Open Windows Update by clicking the Start button. In the search box, type
Update, and then, in the list of results, click Windows Update.
2.In the left pane, click View update history.
3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
If there is no any Windows Update installed, try to
reset the Windows Update component to check if it could resolve the issue.
Karen Hu
TechNet Community Support

Windows Updates won't install - Error 0x80072EFD

Question
Windows Updates won’t install. I’m receiving Error 0x80072EFD. What can I do to solve this?
Answer
This particular error means that your computer was not able to connect to the Internet when it tried to install updates. First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
To complete this method, follow these steps.
Step 1: Make sure that Windows Firewall is turned on
To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
Click Turn Windows Firewall on or off.
Click On (recommended), and then click OK.
Step 2: Temporarily disable third-party firewalls
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
Step 3: Try to install the updates again
If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
If this method did not resolve your issue, continue with Method B.
Method B: Temporarily disable third-party antivirus software
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Locate and temporarily disable your third-party antivirus software
Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
Look for the antivirus software in the list of programs on the Start menu.
Type the name of the software or the publisher in the Search box on the Start menu.
Look for the software in Action Center:
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
If Windows can detect your antivirus software, it will be listed under Virus protection.
If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
Note You may have to look in the application documentation to determine how to do this.
Step 2: Check for Windows Updates
As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
If this method did not resolve your issue, continue with Method C.
Method C: Disable software accelerator programs
Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Disable software accelerator programs
To do this, select from the following options:
See the documentation that was included with the program.
View the Help files for your program.
Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
http://support.microsoft.com/gp/vendors
Step 2: Install Updates
As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
If this method did not resolve your issue, continue with Method E.
Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
Start Windows Internet Explorer.
On the Tools menu, click Internet Options.
Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
Click the Security tab, and then click Trusted Sites.
Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
http://update.microsoft.com
http://windowsupdate.microsoft.com
Click OK two times.
Try to install the updates again.
If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

Mark, I've just been through this update issue with two installations. In my case, it seemed intertwined with authentification and indexing not working, either. Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it. Which is why I did a clean install of Win7 ultimate 64bit on my T61p. The install (including update) worked great until I ran the intel matrix storage manager update. This broke windows update. If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update. I tracked this down to a driver, iastor.sys, in windows\system32\drivers. I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed. To be clear: I couldn't get windows update or indexing to work. I overwrote* the "bad" iastor.sys with one that worked on another computer. Rebooted. Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated. I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p? Not listed anywhere on site, links on the web referring to it are all broken. Is the System Interface Driver now part of another driver program? Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

10.4 update won't install

latest iTunes update won't install correctly. Says to shut down iTunes for update to complete. I've made sure 3 times that iTunes was not opened.

I'm having the same problem with Windows 7 and cannot download direct from the website.

Updates won't install,billing info wrong

Updates won't install,keeps saying problem with billing info,then there was a problem with a previous payment,but I can't find out what is was.

You'll have to update your billing info from itunes, here's a guide on how to do it on iOS http://support.apple.com/kb/ht1918?viewlocale=nl_nl . It may be that there weren't suffecent funds at the time of the last purchase, in which case you'll just have to varify the three digit security code. Hope it helps!

Illustrator update won't install, even after uninstalling and retrying multiple times.

Illustrator update won't install, even after uninstalling (using the "Uninstall Adobe Illustrator CS6" app and retrying (using Adobe Application Manager}multiple times. Now I can't open AI CS6 at all.
The error message I get in Application Manager is:
"Application could not be found. Restore in case it was trashed/moved to a different volume. Reinstall the application otherwise (U44M1P2B)"
Help!

Can you please try installing the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
If that doesn't work then the safest course would be to remove all Adobe Creative Software using the uninstallers located in Applications/Utilities/Adobe Installers. This should then remove the Adobe Application Manager folder also inside Utilities. Once the software is completely uninstalled and the Adobe Application Manager is removed then you should be able to reinstall from https://creative.adobe.com/.

New update won't install on my Dell Laptop Windows 7. Even tried from the iTunes website. Now all of my access is gone. What must I do?

New update won't install on my Dell Laptop Windows 7. Even tried from the iTunes website. Now all of my access is gone. What must I do?

Hello SandyJeanne,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

Jam Pack 4 update won't install

I've resinstalled *Jam Pack 4* 1.0 and went to Apple's site and downloaded the 1.0.1 update to correct some sound quality issues. However, the update won't install. I keep getting the message, "There is nothing to install," when I get to that step in the installation process. I see in an archived area others have had this problem as well with this Jam Pack 4 update. Why won't the update install?
Any help out there for this?

try repairing permissions:
http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions

IPhoto 9.1 update won't install

I just bought a new MacBook Pro. It came with iPhoto 11. The iPhoto 9.1 update won't install. It keeps saying that I need iPhoto 9.0 or greater, but I have iPhoto 11. I have not moved iPhoto from its default location. My computer is only 2 days old. I've seen others with this problem, but no real solution. Anyone have any suggestions?

Thanks for your response TD, but this App, iPhoto 11 came already installed on my computer. I registered my computer, but you can't register a product without a serial number. I don't have the iPhoto 11 serial number because it came installed on my computer already. I tried re-installing iPhoto 9.1 after registering my computer and got the same error message. However, I did find out that I hae 90 days of complimentary phone support. So I will be giving Apple a call.

10.8.4 Update won't install

I have tried numerous times to install this latest update. It downloads, installs, and then restarts - and then when it comes back up - it is still on 10.8.3 and it shows I have an update to install! What the heck - I have tried to get this update installed for two weeks now thinking it would get fixed somehow on the Apple site or something, but no, it still won't install properly.
Is anyone else having this issue or is it just me. Thanks.

Click here and download it.
(85195)

Reader update won't install--over and over

Adobe's install procedure fails numerous times over several months. I see no way to provide
feedback about the failure. Almost no information is given with the feedback. This strikes me
as amateurish software development & maintenance.
--Mischlbay

You need to install all previous updates before you can install this one. If you have done so and it still won't install. Then uninstall Reader. Run the Microsoft installer cleanup tool, then try to re-install all from scratch.

Addon updates won't install or uninstall with restart in 3.6.8

I updated Firefox to 3.6.8 and now it won't install or uninstall addons after a browser restart the way it should. It isn't just updated addons, I can't uninstall any either.

I updated Firefox to 3.6.8 and now it won't install or uninstall addons after a browser restart the way it should. It isn't just updated addons, I can't uninstall any either.

Itunes update won't install

I have Windows 7 64bit and the latest update for iTunes corrupted my computer. It won't install and I can not launch iTunes. I tried uninstalling iTunes and all of it's components but Apple Mobile device Support will not uninstall. I've rebooted several times and tried to install the latest version several times only to be met with the following error messages:
Install failed "APS DAEMON.EXE error. MSVCR80.dll missing" and "iTunes not installed correctly. Error 7 (windows error 1236)"
What do I do now?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you go to the general iTunes for Windows forum, where this subject has been addressed in a number of threads.
Regards.

My update won't install.

I'm trying to update my firefox but it won't install. There are no other versions firefox running. I get to the point of apply update, I have tried restarting my computer multiple times. I have an iMac. I use OS X 10.9.2

If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox application and save the disk image file to the desktop
*Firefox 28.0: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

5.3.1 in Software Update; Won't Install

I'm updating a computer to the latest software. It has AirPort Utility 5.2.2. Software Update shows the 5.3.1 update, but it won't install. When I launch a downloaded 5.3.1 updater, it shows no qualifying volumes. It seems that the updater only works with a computer that already has AirPort Utility 5.3. It strikes me as bizarre that Software Update shows an update that can't be installed on the computer.
By the way, the 5.3.1 update seems to be really an updater rather than a complete replacement for the application. It's only 1/4th the size of the application itself.

Some corrections to my prior post:
1) I tried again and was able to install AirPort 5.3.1 on that computer from the stand-alone updater. It's possible that earlier I was trying to install the Tiger version by mistake.
2) Maybe 8.8MB IS enough for a complete installation of the AirPort Utility...
The issue still stands of why Software Update presented an update that it wasn't able to install.

Updater Won't Install ?!

Similar Messages

Maybe you are looking for