Updates Pixi Problem

Hi everybody!
I'm living in UK and I bought new german O2 palm pixi qwertz without simlock on ebay.co.uk. After update on 1.4.5 didn't work "system sound's" properly (i didn't heard any of them like tap on phone app keys, new sms notice etc). I tried to put battery off, restart phone, but nothing helped me. WebOs doctor (on mac os x 10.6.4) was frozen after all: I install it ok, I prepared pixi in recovery mode (with volume up and turn it on) ok too, webos check pixi ok and started work but after 4hours webos show me still 2% done, so I turn webos doctor off.
Big suprise now is palm pixi is not just running but system sound's are working correctly after that.
BUT: I did same test in Device Information and Quick Test show me this like message error: Quick Test Report: Code: 20, Hardware Area: Modem. Also I see the indicator of GSM just 2/5 or 1/5 full in area, where I am sure about normal strong signal from every other mobile.
Is anybody here, who may tell me what does it mean, please? I need to now what is error code 20 and how big problem is it. And is this problem of firmware or version 1.4.5 and I potentionally can repare it with next upgrade or I have to found same way of guarantee...
Thanks for answers and sorry for my english.
Almaviva
Palm WebOs 1.4.5, firmware XU1.6.13(3125), model P121UEU, Palm Pixi qwertz.
the seller http://cgi.ebay.co.uk/BNIB-8GB-3G-PALM-PIXI-PLUS-FACTORY-UNLOCKED-SIMFREE-/300422498026?pt=UK_Mobile...
Post relates to: Pixi Plus p121ueu (02)

I got a new Pixi Plus recently and I have the same problem I think.
First it worked fine but then I changed to a new kind of SIM-card with two pin codes, one for the mobile number and one for the ordinary number. The 3G-connection then disappeared and instead there is an R indicating roaming even though roaming is disabled. I use this unlocked phone in Sweden with a swedish network provider.
The Quick test results in error code 20.
I have tried restarting and even hard reset.

Similar Messages

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

10.4.11 combo update install problem

Has anyone else had trouble installing the combo update from 10.4 to 10.4.11?? Mine almost finishes and says it encounters an unknown error and cannot finish the install. Says it moves the update to trash and says try again from the finder...
HELP!!

Updating
Certain steps appear to minimize the risk of an update producing problems.
Number one is to make sure you have a bootable clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
You can also go to the step of booting into safe mode to do the install.
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
Repair permissions again afterward.
It helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
Almost all of the above steps (except backup) have been questioned (e.g., [Permissons repair|http://www.macworld.com/article/52220-3/2006/08/repairpermissions.html] as to necessity. Probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe?
[BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
[Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]
[Klaus1's post on updating and removing updates|http://discussions.apple.com/message.jspa?messageID=10257902] and [another one|http://discussions.apple.com/message.jspa?messageID=10402175]

SQL Server 2005 Update mechanism problem

Hi Gurus,
      We're faced with one SQL Server 2005 update mechanism problem. Here is my problem:
      According to our requirement, an add_on interface program is designed to execute creation of production order by calling Bapi.
      There are 3 steps in this add_on program:
      Step 1: Create production order
      Step 2: Change the information of production.
      Step 3: Some other
      After the step 1 has finished immediately step 2 is called, Howerver the information which should have inserted into database table couldn't be found from database. (Maybe because the time between two steps is too short to finish inserting)
      In order to ensure the complete of the transaction, before the step 2 executed, the information in step 1 should have inserted into database.
       Is there any solution to solve this problem?
       I guess whether there is any parameter which control the time of writing buffer into database...
Any advice is appreciated.
Thanks & Best Regards,
Derek Yang

Hi
I have the same problem, but that post didnt help me
This is the error I have:
My snapshot agent hangs.. waiting for a response from the server.. and timeouts.
This only hapens for a publication that has a filter based on HOSTNAME()
The other publications work fine
Error messages:
Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Command Text: sp_MSsetup_partition_groups
Parameters: @publication = XXXXXXX
Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.SetupPartitionGroups()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoRegularMergeSnapshotPreparations()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPreArticleFilesGenerationProcessing()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: -2)
Get help: http://help/-2
Server XXXXXXXXX, Level 11, State 0, Procedure , Line 0
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Source: MSSQLServer, Error number: -2)
Get help: http://help/-2

Update/Insert Problem with Oracle Warehouse Builder

Hello,
i have update/insert problem with owb.
Situation: I have a source-table called s_account and a target table called w_account_d. In the target table are already data which was filled trough the source table inserts. Now anyone make changes on data on the target table. This changes should now give further on the source table with an update operation. But exactly here is the problem i can´t map back the data to source because that will create a loop.
My idea was to set a trigger but i can´t find this component in owb or is anywhere hidden?
Also i have already seen properties as CDC or conditonal loading in the property inspector of the table, but i have no idea how it works.
Give it other possibilities to modeling this case? or can anyone me explain how i can implement this eventually with CDC?
I look forward for your replies :)

Hi
thanks for your answer. I follow your suggestion and have set the constraints of both tables into the database directly.Nevertheless it doesn´t work to begin. In the next step i found by right click on a table the listpoint "configure" - I goes to "unique key" --> creation method and set here follow options: Constraint State = ENABLE, Constraint Validation = Validate. That error message that appears before by the deployment disappears yet. Now i start the job to test if the insert/update process works right. Finally it seems to work - but not really.
My Testscenario
1. Load the data from source table about the staging area to data warehouse table: Check - it works!
2. Change one data record in source table
3. Load the source table with changed data record once again to staging area: Check - it works!
4. Load new staging area table with the changed data record to data warehouse table: Check it works! BUT, BUT i can not recognize if it is insert or update operation, then under the design window by jobs execution windows is reported "rows selected 98", Rows inserted" is empty and "rows updated" is empty. So i think works not correct, then my opinion if it works correct it should show be "rows updated" 1.
What can yet now still be wrong or forgotten? Any ideas?
*By the way think not 98 rows there is not important if you make an update or insert which performance. It is an example table the right tables have million of records.*
I look forward for your answers :)

Tried to buy Aperture 3 and got an error message Aperture can't be installed on "Macintosh HD" because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update. Problem is, I had already updated my IMac to Lion OS

Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update. Problem is, I had already updated my IMac to Lion OS

iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)

Update installation Problems: Code U44M1P7 in Extension Manger 6.0.4 and Illustrator and PS CS6

Hello,
After the installation of several updates I find several errors in the error log:
" Update installation Problems: Code U44M1P7 in Extension Manger 6.0.4 and Illustrator and PS CS6"
I use a Mac Book Pro with Retina and MAC OSX 10.7.5.
What is the problem and how can I solve it?
Best regards
Frank

Follow the instruction given at the following link:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

HT4561 10.6.8 printing results in paused printers. Have applied 10.6.8 supplemental update but problems remain. Are there other known fixes?

After applying 10.6.8 Supplemental Update a network printer status turns to paused after a printing attempt. Have deleted and reinstalled printers after the 10.6.8 update but problem reoccurs. I have also installed the Repair10.6.8.dmg package but that suggested fix did not work either. Any other suggestions?

Wuzradioaman,
Thanks for your feedback.
Let me first correct myself. My aunt had bought the MBP from apple store USA for me 1 year ago, but she could have only delivered it to me 2 months ago. Its' a brand new computer. I run OSX Snow Leopard 10.6.7 and keeps warning me to update to 10.6.8. As I said, by the time I have received my computer, I tried to learnd and update it but created problems. So I had to go back to the original version which is 10.6.7. Now, for Mountain Lion I am expected of updating to 10.6.8. I am scared the problem would repeat again.
What can I do? Did Apple release any patch/update to fix the problem?

Apple TV after recent update has problems with Hulu Fall 2014 shows

In specific, ONCE Season 4 from ABC. The shows play about 15-17 minutes, up to the 2nd commercial - which fails almost immediately, the screen goes black and nothing. (I did find that the SUBTITLES come through - of all things.) If you try and re-start the episode with RESUME PLAYING, you'll just stare at a blank screen for ever.
I have notified HULU of this issue with their content - other shows (like Agents of Shield) play fine, just not ONCE Season 4.
Obviously, something is broken and needs to be fixed.
**** Update **** The problem seems to be caused by the subtitles. Turning the sub-Titles off seems to work-around the problem.

i dont have an ipad but ive had problems also, streaming music from my itunes off my macbook to my appleTV so i after seeing all these itunes 11 problems, im starting to think its the new itunes cuz my airplay was working fine until i updated also.

Update Termiante Problem in the VF02

Dear SAP Technical Guru's,
I am facing Update termiante problem in the VF02 Screen .
MESSAGE
Update was terminated
*System ID.... MRD
Client....... 100
User..... PWC
Transaction.. VF01
Update key... BE944DDDC5AEF1338261001635B0CD06
Generated.... 09.07.2008, 14:25:50
Completed.... 09.07.2008, 14:25:50
Error Info... 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC*
Also When I scroll through the Condition records in the billing screen the conditions are disapperaing.
I have a Userexit attached to it RV60AFZC
Please suggest the solutions of the problem.
regards,
Amlan Sarkar

I am attaching the code of the userexits:
***INCLUDE RV60AFZC.
This include is reserved for user modifications                      *
Forms for invoicing                                                  *
The name of modification modules should begin with 'ZZ'.             *
      USEREXIT_NUMBER_RANGE_INV_DATE                                 *
      USEREXIT_FILL_VBRK_VBRP                                        *
      FORM USEREXIT_NUMBER_RANGE_INV_DATE                           *
      This userexit can be used to determine the numberranges for   *
      the internal document number. This userexit can be used when *
      the number_ranger should impact the invoice date via table    *
      TVFKD.                                                        *
      If this userexit is active the USEREXIT_NUMBER_RANGE is not   *
      processed anymore, that means this userexit has priority.     *
      US_RANGE_INTERN - internal number range                       *
      This form is called from form LV60AU02 and LV60AU11           *
FORM USEREXIT_NUMBER_RANGE_INV_DATE USING US_RANGE_INTERN.
Example: Number range from TVFK like in standard
US_RANGE_INTERN = TVFK-NUMKI.
ENDFORM.
      FORM USEREXIT_FILL_VBRK_VBRP                                  *
      This userexit can be used to fill fields in VBRK and VBRP     *
      Be aware, that at this time the work areas KUAGV KURGV        *
      KUWEV and KUREV are not filled.                               *
      This form is called from FORM VBRK_VBRP_FUELLEN.              *
FORM USEREXIT_FILL_VBRK_VBRP.
Example: change Tax country
VBRK-LANDTX = T001-LAND1.
*{   INSERT         MRDK900206                                        1
*if sy-tcode = 'VF01'.
read table xkomv with key kschl = 'ZTOD'.
if sy-subrc <> 0.
   clear xkomv.
   xkomv-kschl = 'ZTOD'.
   append xkomv.
endif.
*endif.
*----Commented
READ TABLE XKOMV WITH KEY KSCHL = 'ZTOD'.
IF SY-SUBRC <> 0.
   CLEAR XKOMV.
   XKOMV-KSCHL = 'ZTOD'.
   APPEND XKOMV.
ENDIF.
*----End of comment
*}   INSERT
ENDFORM.
*eject
regards,
Amlan Sarkar

Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.

Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.i can't chat,compose mail nothing accessing.

Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

Updated Apple security update No Problems, cant update imovie,getting STATUS_CODE_ERROR

Updated Apple security update No Problems, cant update imovie ,getting STATUS_CODE_ERROR Living in Ireland

Apple’s having trouble with the iTunes Store servers right now. Wait for them to fix it.
(123861)

Update rule problem - validation of "sales/cost w/ tax" keyfigure

BW Gurus,
    Hi to all, i have this update rule problem at "sales/cost w/tax" keyfigure here is the senario.
    Our Goverment mandatory implemented an additional 2% tax from the original 10%, this will affect our report on sales, and also the BW "sales/cost w/ tax" key figure.
    My question is How can I validated the effectivity of the new tax? i have tax 10% from previous sales and 12% on the current sales. What "date field" can I use to validated this. I am using /BIC/CS2LIS_13_VDITM stucture to get the data i need.
Thanks in Advance
Joven

Hi,
Till to day how are extracting the data for tax(original 10%) is it available directly in 2LIS_13_VDITM ?
Usually all taxes( condition types) can be extracted by the data source 2LIS_13_VDKON.Discuss with SD team, they may give the condition type used for different taxes.
With rgds,
Anil Kumar sharma .P

IOS 8.0.2 update causing problems with wifi connectivity..please help

latest update having problems ...please help..!!!!!!!!!!

Just a quick snapshot of my chain of events. I’m currently on my fourth iPhone 6 Plus 64GB here in London, UK. Every time I have spoken to AppleCare and told them that I have gone through all the Wi-Fi troubleshooting methods possible they have asked me to get a brand new retail replacement as I’m within my 14 day return period. I’ve been experiencing the following issues:
Wi-Fi disconnects and switches to 4G (Restart required for temp fix)
Wi-Fi is still active but there is no traffic or activity– often when in sleep mode for long periods of time. (Toggle Wi-Fi on/off for temp fix)
Wi-Fi disconnects and cannot find any networks (restart required for temp fix)
This has been occurring on both iOS 8 and 8.0.2
The issues are the same on both my 2.4Ghz and 5Ghz networks
This is affecting my ip6+ and 5s (5s used to work perfect on ios7 on same networks) – My MBP-R and all other devices run perfectly on my network.
I spoke to AppleCare again yesterday and asked for their advice as its now my fourth iPhone in just under a month. This time they said that apple were fully aware of the Wi-Fi problem and that new repair tickets were not being raised for their engineers as they are already working hard to get this resolved. They also said they could see all the issues raised on the apple discussions boards which they usually don’t admit too! I asked what to do next and the advisor apologised and said this is clearly a software glitch and will be resolved in the next update. I asked for a timescale but unfortunately none was given.
As stated above I have tried all the troubleshooting methods discussed on forums and on tech websites but the only thing that gives me a stable connection without any disconnects (especially on my 6 plus) is turning cellular/mobile data off when I know I’m going to be on Wi-Fi for a sustained period of time (e.g. at home or work). I appreciate this is annoying but it’s the best temp fix until an update comes out.
Hope it helps everyone who is having issues with their devices that have cellular functionality.
Any comments welcome

After update iOS8 problem on iPhone 5

After update iOS8 problem on iPhone 5:
- rapid discharge of the battery!
- flying from the application calls, configure and new special game for iOS 8 "Epic Zen Garden" /

I had the same issue with my battery but figured out what was causing it. I had an email account - an exchange account - that was stuck in a "loading" status for the "Auto Reply." I uninstalled the account and reinstalled and now my battery is back to it's old self.

Updates Pixi Problem

Similar Messages

Maybe you are looking for