Updating a table using a custom OM infotype

Hey gurus,
I have created a custom OM infotype HRP9608. I wish to use this infotype to update a table.
I marked it as an external, country specific infotype and blanked out the Database table from SM30 (table T777D)
I have also blanked out the FM. for tab name using SM30 (table T77ID) and added in Read Function and Primary Table.
The infotype gets created correctly, but when i add it as an external infotype the screen changes. Can someone please provide me with a solution.
Thanks.

Hi,
See the given link, It may help you.
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259392
Regards,
Shamma

Similar Messages

  • How to Update  crmd_customer_h TABLE Using CRMV_EVENT Through Funtion Module

    Hi
    How we can update customer_h table using the CRMV_EVENT Where i implemented logic below in the Funtion Module.
    data:     lt_doc_flow          TYPE crmt_doc_flow_wrkt,
              lw_cust_h_com        TYPE crmt_customer_h_com,
              lw_input_field_names TYPE crmt_input_field_names,
              lt_input_field_names TYPE crmt_input_field_names_tab,
              lt_objects_to_save TYPE crmt_object_guid_tab,
              lw_guid TYPE CRMT_OBJECT_GUID.
    DATA : lv_process_type TYPE crmt_process_type.
    data: wa_doc_flow type CRMT_DOC_FLOW_WRK.
    data: wa_customer_h type crmd_customer_h.
    *  Function module for retriving the Process type.
      CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
        EXPORTING
          iv_orderadm_h_guid     = iv_header_guid
        IMPORTING
          ev_process_type        = lv_process_type
        EXCEPTIONS
          admin_header_not_found = 1
          OTHERS                 = 2.
    if lv_process_type eq 'ZG01'.
    CALL FUNCTION 'CRM_DOC_FLOW_READ_OB'
    EXPORTING
       IV_HEADER_GUID                 = iv_header_guid
    IMPORTING
       ET_DOC_FLOW_WRK                = lt_doc_flow.
    read table lt_doc_flow with key objtype_a = 'BUS2000116' INTO wa_doc_flow. "gc_object_type-service.
                if sy-subrc eq 0.                    "set flag for service order
                lw_cust_h_com-ref_guid       =  wa_doc_flow-objkey_a.
                lw_cust_h_com-ZZTRAIL_FLAG   = 'X'.
                 lw_cust_h_com-mode           = 'A'.
                lw_cust_h_com-ref_handle     = '0000000001'.
                lw_guid = wa_doc_flow-objkey_a.
                INSERT lw_guid INTO TABLE lt_objects_to_save.
         endif.
                  lw_input_field_names-fieldname = 'REF_GUID'.
                lw_input_field_names-fieldname = 'ZZTRAIL_FLAG'.
              lw_input_field_names-changeable = ' '.
               INSERT lw_input_field_names INTO TABLE lt_input_field_names.
    Maintain Customer H
             CALL FUNCTION 'CRM_CUSTOMER_H_MAINTAIN_OW'
                  EXPORTING
                    is_customer_h_com    = lw_cust_h_com
                  CHANGING
                    ct_input_field_names = lt_input_field_names
                  EXCEPTIONS
                    header_change_error  = 1
                    header_create_error  = 2
                   error_occurred       = 3.
    ENDIF.
    *endif.
    *Clearing local variables
      clear: lv_process_type,
             lw_cust_h_com,
             lw_input_field_names.
    *Free internal tables
      free: lt_doc_flow,
            lt_input_field_names.

    Hi Faisal
    I think your not clear with what i am saying anyhow i will again explain you my requirement
    As per my requirement
    1)in the service order search report i need to add a field called "Has trail order with No Follow up" with values "Yes" & "Blank"
    For above Field i added  using the structure CRMST_QUERY_SRVO_BTIL and through configuration i am able to display the field in webui as per (Attachement Pic 1)
    2)When i  search with search criteria as  "Has trail order with No Follow up" with  "Yes"
    Then in result list i need to show the service order those having follow up as trail orders(sales order) only.if for  next document trail order  having any follow up then those service orders dont want to show in result list.
    For above requirement i implemented F.M using CRMV_EVENT & I configured for BUS2000115 And BEFORE_SAVE The Order
    The FM Will get trigger when i save the service order and for that service order if create any follow up and try to save the trail order then This FM Will trigger and in this i am doing validations.
    3)Add one AET Trail Flag field is added under CUSTOMER_H Table.
    4)in the FM I am validating for if the trail order having the preceding document as service order then i need to make flag as "X" For that service order in customer_h
    if suppose when i delete trail order from the service order then that flag must need to be "unset" from the CUSTOMER_H.
    Why bcoz we are doing above process is do show records in result list based on Flag values
    these flag checks are validating in the BADI Which we implemented for search logic.
    Please refer below Login for my requirement:-
    Proposal to have a custom “flag” field (background at table level,
         crmd_customer_h) linked to service order which gets flagged whenever at
         least one Trial order is created and saved from the Service Order.
    The flag value should be cleared when all the trial orders created and
    saved as follow up transactions are deleted from the system.
    Similarly for Trial Orders will use the same custom “flag” field
         which gets activated when at least one follow up is created and saved from Trial Order.
    The flag value should be cleared when all the follow up transactions from
    the Trial Order are deleted from the system.
    When the above search criteria “Has Trial order with no follow up”
         “is” “Yes” is applied then the logic derives all the service
         orders which satisfy additional search criteria applied in the search and
         for these Service orders checks if the custom flag field is checked to
         derive all Service orders which have Trial order. The custom flag values
         values are derived from crmd_customer_h table in CRM.
    4 )Further for all the Trial Orders determined in Step 3
    check if the Trial Order has a follow up by checking if the custom flag field
    is checked. The custom flag values are derived from crmd_customer_h table in
    CRM.
    5) If step 4 is not met populate the preceding Service
    Orders in the Result list

  • Updating EKKO table using E1BPPAREX

    Hi all,
    My requirement is to update ekko table using E1BPPAREX segement. I have gone through so many posts regarding this.
    In my case, PO number is not yet created. I am using BAPI_PO_CREATE1 for creating this . From PI side, if they pass the custom field value in the appropriate postion of VALUEPART field of E1BPPAREX, will it get updated to the ekko table automatically.
    Regards,
    Sajith

    Hi Sajith,
      you have to do is populate structure extensionin. You'll have to implement the fm DDIF_NAMETAB_GET to look for the right place (offset) in order to add the field on the structure extension in.
    Example:
      CALL FUNCTION 'DDIF_NAMETAB_GET'
        EXPORTING
          tabname   = c_ext_table   --> ''BAPI_TE_MEPOHEADER
        TABLES
          dfies_tab = lt_tab
        EXCEPTIONS
          not_found = 1
          OTHERS    = 2.
      CLEAR l_offset.
      LOOP AT lt_tab.
        CASE lt_tab-fieldname.
          WHEN c_yourfield.
            w_extin-valuepart1+l_offset = p_yourfield.
        ENDCASE.
        ADD lt_tab-leng TO l_offset.
      ENDLOOP.
      MOVE c_ext_table TO w_extin-structure.
      APPEND w_extin TO p_i_extin.
    Regards,
    Carlos.

  • Code to update a table using sqlldr

    Hi all,
    can anybody give the code to update a table using sqlldr with an example
    thank you

    You want add the new line and modified the existing line (based on empno) from file e:\scripts\sql\emp2_ext.dat into table emp2 :
    7782,CLARK,MANAGER,7839,09/06/81,80000,,10
    8000,ORACLE,DATABASE,,11/02/07,99999,,20Then :
    SQL> conn system/mypwd
    Connected.
    SQL>
    SQL> create directory my_dir as 'e:\scripts\sql';
    Directory created.
    SQL>
    SQL> grant read,write on directory my_dir to scott;
    Grant succeeded.
    SQL>
    SQL> conn scott/mypwd
    Connected.
    SQL> create table emp2_ext
      2  (EMPNO    NUMBER(4),
      3   ENAME    VARCHAR2(10),
      4   JOB      VARCHAR2(9),
      5   MGR      NUMBER(4),
      6   HIREDATE DATE,
      7   SAL      NUMBER(7,2),
      8   COMM     NUMBER(7,2),
      9   DEPTNO   NUMBER(2)
    10  )     
    11  ORGANIZATION EXTERNAL
    12  ( TYPE ORACLE_LOADER
    13    DEFAULT DIRECTORY my_dir
    14    ACCESS PARAMETERS
    15    ( records delimited by newline
    16      badfile my_dir:'emp2_ext.bad'
    17      logfile my_dir:'emp2_ext.log'
    18      fields terminated by ','
    19      missing field values are null
    20      ( empno, ename, job, mgr, hiredate char date_format date mask "dd/mm/yy",
    21        sal, comm, deptno
    22      )
    23    ) LOCATION ('emp2_ext.dat')
    24  ) ;
    Table created.
    SQL>
    SQL> select * from emp2_ext;
         EMPNO ENAME      JOB              MGR HIREDATE        SAL       COMM     DEPTNO
          7782 CLARK      MANAGER         7839 09/06/81      80000                    10
          8000 ORACLE     DATABASE             11/02/07      99999                    20
    SQL> select * from emp2;
         EMPNO ENAME      JOB              MGR HIREDATE        SAL       COMM     DEPTNO
          7782 CLARK      MANAGER         7839 09/06/81      24500                    10
          7839 KING       PRESIDENT            17/11/81      50000                    10
          7934 MILLER     CLERK           7782 23/01/82      13000                    10
    SQL> merge into emp2 a
      2  using (select * from emp2_ext) b
      3  on    (a.empno=b.empno)
      4  when matched then update set a.ename=b.ename,
      5                               a.job=b.job,
      6                               a.mgr=b.mgr,
      7                               a.hiredate=b.hiredate,
      8                               a.sal=b.sal,
      9                               a.comm=b.comm,
    10                               a.deptno=b.deptno
    11  when not matched then insert (a.empno, a.ename, a.job, a.mgr, a.hiredate, a.sal, a.comm, a.deptno)
    12                        values (b.empno, b.ename, b.job, b.mgr, b.hiredate, b.sal, b.comm, b.deptno);
    2 rows merged.
    SQL>
    SQL> select * from emp2;
         EMPNO ENAME      JOB              MGR HIREDATE        SAL       COMM     DEPTNO
          7782 CLARK      MANAGER         7839 09/06/81      80000                    10 --modified line
          7839 KING       PRESIDENT            17/11/81      50000                    10
          7934 MILLER     CLERK           7782 23/01/82      13000                    10
          8000 ORACLE     DATABASE             11/02/07      99999                    20 --added line
    SQL> HTH,
    Nicolas.
    Well, Hans has already give good explanation with docs links...
    Message was edited by:
    N. Gasparotto

  • Updating multiple tables using JDBC Adapter

    Hi,
    I am trying to insert/update multiple tables using one message via JDBC adapter. The following is the message being posted. However, only the first statement was executed. Anything wrong?
    Thanks in advance!
    Hart
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:DeliveryDBUpdate xmlns:ns0="http://test.com/r3_integration"><DeliveryData><DelHeader action="UPDATE_INSERT"><table>DelHeader</table><access><DelNo>0080000230</DelNo><DelType>LF</DelType><XOverwrite>X</XOverwrite><ShipTo>0000000026</ShipTo><SoldTo>0000000026</SoldTo><Priority>00</Priority><DocDate>02/17/2007</DocDate><GText>CIF Test</GText><DelDate>02/20/2007</DelDate><PickDate>02/20/2007</PickDate><ShipPoint>NO02</ShipPoint><PackCount>00000</PackCount></access><key><DelNo>0080000230</DelNo></key></DelHeader>
    <DelItem action="INSERT"><table>DelItem</table><access><DelNo>0080000230</DelNo><ItemNo>000010</ItemNo><GText>10# GRAN-GREAT VALUE</GText><Material>G04410G611</Material><Plant>6005</Plant><SLoc>6005</SLoc><RefDoc>mmenon32</RefDoc><RefItem>00000000</RefItem><DelQty>5.000</DelQty><UOM>BL</UOM></access><access><DelNo>0080000230</DelNo><ItemNo>000020</ItemNo><GText>25# GRAN- GREAT VALUE</GText><Material>G04025G611</Material><Plant>6005</Plant><SLoc>6005</SLoc><RefDoc>mmenon32</RefDoc><RefItem>00000000</RefItem><DelQty>5.000</DelQty><UOM>BG</UOM></access></DelItem></DeliveryData></ns0:DeliveryDBUpdate>

    Hi,
    You need 2 STATEMENT level tags,
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:DeliveryDBUpdate xmlns:ns0="http://test.com/r3_integration">
    <b><DeliveryData1></b>
    <DelHeader action="UPDATE_INSERT">
    <table>DelHeader</table>
    <access>
    <DelNo>0080000230</DelNo>
    <DelType>LF</DelType>
    <XOverwrite>X</XOverwrite>
    <ShipTo>0000000026</ShipTo>
    <SoldTo>0000000026</SoldTo>
    <Priority>00</Priority>
    <DocDate>02/17/2007</DocDate>
    <GText>CIF est</GText>
    <DelDate>02/20/2007</DelDate>
    <PickDate>02/20/2007</PickDate>
    <ShipPoint>NO02</ShipPoint>
    <PackCount>00000</PackCount>
    </access>
    <key>
    <DelNo>0080000230</DelNo>
    </key>
    </DelHeader>
    <b><DeliveryData1></b>
    <b><DeliveryData2></b>
    <DelItem action="INSERT">
    <table>DelItem</table>
    <access>
    <DelNo>0080000230</DelNo>
    <ItemNo>000010</ItemNo>
    <GText>10# GRAN-GREAT VALUE</GText>
    <Material>G04410G611</Material>
    <Plant>6005</Plant>
    <SLoc>6005</SLoc>
    <RefDoc>mmenon32</RefDoc>
    <RefItem>00000000</RefItem>
    <DelQty>5.000</DelQty>
    <UOM>BL</UOM>
    </access>
    <access>
    <DelNo>0080000230</DelNo>
    <ItemNo>000020</ItemNo>
    <GText>25# GRAN- GREAT VALUE</GText>
    <Material>G04025G611</Material>
    <Plant>6005</Plant>
    <SLoc>6005</SLoc>
    <RefDoc>mmenon32</RefDoc>
    <RefItem>00000000</RefItem>
    <DelQty>5.000</DelQty>
    <UOM>BG</UOM>
    </access>
    </DelItem>
    <b></DeliveryData2></b>
    </ns0:DeliveryDBUpdate>
    Try with such a strcuture and let us know if it works.
    Regards
    Bhavesh

  • Update a table using MODIFY

    Hi,
    We need your help.
    We want to update a table using the MODIFY command but it does not delete the previous entries instead it INSERTs a new entry.
    Scenario:
    1. Upon calling the Screen for Editing the entry, the previous entry must be deleted
    2. When SAVEd, the new entry must replace the previous entry.

    Make sure that in the definition or your table you have specified the key. Otherwise, the system may "think" that all the fields are part of the key, therefore all lines are different.
    This is a extract from SAP's documentation:
    "The line to be changed is determined by the fact that the content of the table key matches the content of the corresponding components in the wa work area. For tables with a key that is not unique, the first entry that is found is changed. "
    Regards.

  • Updating a table using cursor is taking long time in oracle

    Hi,
    I am working on the oracle database 11gR2. I am trying update a table column which is newly added through cursor. below is the cursor.
    BEGIN
         FOR lcur_tab IN (select l.LOGIN_ID as login_id, lt.ERROR_CODE as error_code from LOGIN l INNER JOIN LOGIN_TASK lt ON (l.LAST_LOGIN_TASK_ID = lt.LOGIN_TASK_ID) )
         LOOP
                   UPDATE ACCOUNT SET LOGIN_ERROR_CODE = lcur_tab.error_code where ACCOUNT_ID IN (SELECT ACCOUNT_ID FROM LOGIN_ACCOUNT where LOGIN_ID = lcur_tab.login_id ) ;
         end LOOP;
         commit;
    END;
    In the cursor we are trying to copy the Login table error_code value to LOGIN_ERROR_CODE of ACCOUNT Table, for the accounts associated with that Login. Here newly added column is LOGIN_ERROR_CODE in account table. this account table have 11million rows in it. when i used the above cursor it took 3hours and still running. So we stopped after that. Is there any way i can change this cursor syntax to update those column values. How can we do this type of updates?
    Also i am planning to run thus update in the background . I don't have much knowledge on the PL/SQL stuff. So please help on this.
    Thanks in advance.
    Edited by: Hari on Mar 21, 2012 10:06 PM

    Is there a reason that you don't want to do this with a single `UPDATE` statement? That should be quite a bit more efficient.
    Something like
    UPDATE account a
       SET login_error_code = (
          select lt.error_code
            from login_task lt
                 join login l on (l.last_login_task_id = lt.login_task_id)
                 join login_account la on (la.login_id = l.login_id)
           where la.account_id = a.account_id )
    WHERE EXISTS (
          select 1
            from login_task lt
                 join login l on (l.last_login_task_id = lt.login_task_id)
                 join login_account la on (la.login_id = l.login_id)
           where la.account_id = a.account_id );Justin

  • Update Mseg Table using MB_MIGO_BADI

    Hi Experts
    I had a requirement to add an additional tabstrip at the item level of MIGO transaction .
    I have implmeented the same using MB_MIGO_BADI .
    I have also added a field quantity on this tab.
    The problem now is i'm not able to update this field in the MSEG table.
    I have extended the MSEG table using append structures.
    Regards,
    Sunitha.
    Edited by: sunitha j on Mar 1, 2009 2:34 PM

    check whehter the added field is getting the data that you enter in the trnasaction in debug mode and whether the move of the data is happening...
    Regards,
    Sravan.

  • Updating lookup table using merge query

    Hi Experts,
    My requirement is, we have total 4 tables called x,y,z and a_lookup table. join column between all these tables is deptno.
    I need to update a_lookup table based on below conditions
       condition1 :   Update a_lookup table with matched records of X and Y
       condition2:    If there is any record in X is not matching with Y, then we need to compare with Z and update the a_lookup table accordingly
    Here is the table scripts and my attempt as well.
    Only doubt is,  is my MERGE statement looks fine or is there any other better way to update the a_lookup table ?
    Please share your thoughts on this.
    create table x(empno number, deptno number);
      -- sample data
      insert into x
        select level, level * 10 from dual connect by level <= 10;
      create table y(empno number, deptno number);
      -- sample data
      insert into y
        select level, level * 10 from dual connect by level <= 5;
      create table z(empno number, deptno number);
      -- sample data
      insert into z
        select level, level * 10 from dual connect by level <= 10;
      create table a_lookup(empno number, deptno_lookup number);
      -- sample data
      insert into a_lookup
        select null, level * 10 from dual connect by level <= 10;
      -- Merging records into a_lookup based on X,Y,Z. Used right outer join on X and Y
    merge into a_lookup a
    using ( (select  x.deptno,x.empno   from x,y where x.deptno=y.deptno)
               union all
               (select z.deptno,z.empno from z, (select x.deptno from x,y where x.deptno=y.deptno and y.deptno is null)  res1
                  where z.deptno = res1.deptno)
               ) res
    on( a.deptno_lookup = res.deptno)
    when matched then
      update set a.empno = res.empno;
    Cheers,
    Suri ;-)

    Assuming empno is unique in X, Y and Z:
    merge
      into a_lookup a
      using (
             select  nvl(y.empno,z.empno) empno,
                     x.deptno
               from  x,
                     y,
                     z
               where y.deptno(+) = x.deptno
                 and z.deptno(+) = x.deptno
            ) b
      on (
              a.deptno_lookup = b.deptno
          and
              b.empno is not null
      when matched
        then
          update
             set a.empno = b.empno
    10 rows merged.
    SCOTT@orcl > select * from a_lookup;
         EMPNO DEPTNO_LOOKUP
             1            10
             2            20
             3            30
             4            40
             5            50
             6            60
             7            70
             8            80
             9            90
            10           100
    10 rows selected.
    SCOTT@orcl >
    SY.

  • Updating a Table using Spreadsheet

    Hi,
    There are a couple tables that I would like to update regularly, like once every week. Instead of adding new rows, how can I update the tables by uploading CSV files using the Upload Utilities?
    Thank you very much for your help in advance!

    Here is an easier solution..
    1) Have you DBA create an Oracle directory on the server (it is created in Oracle and maps to a operating system directory.
    2) Create a external table in that directory, have it have the same layout as your spreadsheet
    3) Now when you build the external table, give it the name of the spreadsheet file
    4) You can then copy the file to the directory
    5) Write a small pl/sql script to select from the external table and do a merge of the data selected into the existing table (See merge command syntax here: http://www.oracle.com/technology/products/oracle9i/daily/Aug24.html)
    Thank you,
    Tony Miller
    Webster, TX

  • Update sap table using a function module call by php code

    Hello,
    I m trying to update the table VBAP using a function module ZZ_SET_DISTANCE  call by a php code.
    But I have this problem:
    the saprfc seems to work well but when I look to the table VBAP the fields have not been update.
    I tried the function module in debug mode and it work good. The fields are update.
    I also handle the saprfc call function and the return SAPRFC_OK
    This are the function module ZZ_SET_DISTANCE, and the php code
    //PHP CODE
    $fce = saprfc_function_discover($sap,"ZZ_SET_DISTANCE");
                  if (! $fce ) {echo "Echec d'ouverture du module fonction "; exit;}
                   saprfc_import ($fce,"COMMANDE", '0000001998');
                   saprfc_table_init($fce,"TBLE_CMDE");
                        $val=array();
                        $val['NUM_POST']='000030';
                        $val['HN_EXP']='';
                        $val['ST_EXP']='';
                        $val['PC_EXP']='';
                        $val['CI_EXP']='';
                        $val['CO_EXP']='';
                        $val['HN_REC']='';
                        $val['ST_REC']='';
                        $val['PC_REC']='';
                        $val['CI_REC']='';
                        $val['CO_REC']='';
                        $val['DIST']='popo';
                        saprfc_table_append ($fce,"TBLE_CMDE", $val);
                 $rfc_rc = saprfc_call_and_receive ($fce);
                 echo "\n".$rfc_rc;
                 if ($rfc_rc != SAPRFC_OK) { if ($sap == SAPRFC_EXCEPTION ) echo ("Exception raised: ".saprfc_exception($fce)); else echo (saprfc_error($fce)); }else{echo '/execution de la function ;}
                 saprfc_function_free($fce);
    //FUNCTION MODULE ZZ_SET_DISTANCE
    FUNCTION ZZ_SET_DISTANCE.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(COMMANDE) TYPE  VBELN
    *"  TABLES
    *"      TBLE_CMDE STRUCTURE  ZADD_COM_LOXAN
    DATA : NUMC TYPE VBELN.
    NUMC = COMMANDE .
    WHILE STRLEN( NUMC ) < 10 .
      CONCATENATE '0' NUMC INTO NUMC .
    ENDWHILE .
    DATA tble_addrcomm LIKE LINE OF TBLE_CMDE .
    LOOP AT  TBLE_CMDE INTO  tble_addrcomm.
      DATA : NUMP TYPE POSNR.
      NUMP = tble_addrcomm-NUM_POST.
      WHILE STRLEN( NUMP ) < 6 .
      CONCATENATE '0' NUMP INTO NUMP .
      ENDWHILE .
      UPDATE VBAP SET ARKTX = tble_addrcomm-DIST
      WHERE VBELN EQ COMMANDE
      AND POSNR EQ NUMP.
    ENDLOOP.
    ENDFUNCTION.
    Is anybody can help me?
    thank.

    Marie, create a Blog please, about more details for dummies....
    1) how to connect to sap system?
    2) you run the php code where? in a webserver or where?
    3) wich is the url for run the FM: ZZ_SET_DISTANCE
    4) you placed some dlls files on the web server?
    please is interesting this...
    Thanks

  • Help on Updating master table using SAP NetWeaver 2004s

    Dear BSP ians,
    I need to edit,modify multiple records and has to be updated in the master table using MVC. We are using SAP NetWeaver 2004s.
    We have gone through the sample codings which is present in the forum already, and we have worked out using Pages with Flow Logic on ECC 6.0 and those are not getting exexcuted for "SAP NetWeaver 2004s".
    Help me in this issue.
    Points will be rewarded for helpful infos.
    Gokul.N

    My issue is, the sample codes present alreaady in the forums works in ECC 6.0
    But we are using  "SAP Netweaver 2004s"

  • Update EKKO table for the custom field through BAPI

    Hi Experts,
    I need to create an Custom field in EKKO table through Include Structure.
    Now I have to update that custom field in my program.
    I have gone through the following but could not solve my question.
    Update EKKO table
    User Exit for ME21 PO Creation at the time of saving--Urgent
    I don't need to update when I hit the save button or any thing
    I have the PO's which needs to be updated with that field...
    Any suggestions would be greatly helpful.
    Thanks,
    Chaithanya...
    <removed_by_moderator>
    Edited by: Julius Bussche on Jul 7, 2008 10:47 PM

    Hi Patrick,
    Sorry Patrick you are right.. The structure is at header level.
    I have made the changes still I could not achieve it.
    I have made the following
    In EKKO table I have append the structure with a custom field ZZBUY.
    Now I have also appended BAPI_TE_MEPOHEADER and BAPI_TE_MEPOHEADERX with the custom field
    ZZBUY.
    Here is my program
    Data: wa_bapi_poheader  type BAPIMEPOHEADER,
             wa_bapi_poheaderx type BAPIMEPOHEADERX.
    Data: it1_bapi_poheader  like BAPI_TE_MEPOHEADER,
             it1_bapi_poheaderx like BAPI_TE_MEPOHEADERX.
    CALL FUNCTION 'BAPI_PO_GETDETAIL1'
      EXPORTING
        PURCHASEORDER            = wa_DATA-ebeln
    *   ACCOUNT_ASSIGNMENT       = ' '
    *   ITEM_TEXT                = ' '
    *   HEADER_TEXT              = ' '
    *   DELIVERY_ADDRESS         = ' '
    *   VERSION                  = ' '
    *   SERVICES                 = ' '
      IMPORTING
        POHEADER                 = wa_bapi_poheader
    *    POEXPIMPHEADER           =
      TABLES
        RETURN                   = it_bapireturn
    it1_bapi_poheader-ZZBUY = 'X'.
    it1_bapi_poheaderx-ZZBUY = 'X'.
    it_extensionin-structure = 'BAPI_TE_MEPOHEADER'.
    it_extensionin-valuepart1 = it1_bapi_poheader.
    append it_extensionin.
    Clear  it_extensionin.
    it_extensionin-structure = 'BAPI_TE_MEPOHEADERX'.
    it_extensionin-valuepart1 = it1_bapi_poheaderx.
    append it_extensionin.
    Clear  it_extensionin.
       CALL FUNCTION 'BAPI_PO_CHANGE'
         EXPORTING
           PURCHASEORDER                = wa_data-ebeln
           POHEADER                     = wa_bapi_poheader
           POHEADERX                    = wa_bapi_poheaderx
    *      POADDRVENDOR                 =
    *      TESTRUN                      =
    *      MEMORY_UNCOMPLETE            =
    *      MEMORY_COMPLETE              =
    *      POEXPIMPHEADER               =
    *      POEXPIMPHEADERX              =
    *      VERSIONS                     =
    *      NO_MESSAGING                 =
    *      NO_MESSAGE_REQ               =
    *      NO_AUTHORITY                 =
    *      NO_PRICE_FROM_PO             =
    *    IMPORTING
    *      EXPHEADER                    =
    *      EXPPOEXPIMPHEADER            =
         TABLES
           RETURN                       = it_bapireturn
    *      POITEM                       =
    *      POITEMX                      =
    *      POADDRDELIVERY               =
    *      POSCHEDULE                   =
    *      POSCHEDULEX                  =
    *      POACCOUNT                    =
    *      POACCOUNTPROFITSEGMENT       =
    *      POACCOUNTX                   =
    *      POCONDHEADER                 =
    *      POCONDHEADERX                =
    *      POCOND                       =
    *      POCONDX                      =
    *      POLIMITS                     =
    *      POCONTRACTLIMITS             =
    *      POSERVICES                   =
    *      POSRVACCESSVALUES            =
    *      POSERVICESTEXT               =
           EXTENSIONIN                  = it_extensionin
    *      EXTENSIONOUT                 =
    *      POEXPIMPITEM                 =
    *      POEXPIMPITEMX                =
    *      POTEXTHEADER                 =
    *      POTEXTITEM                   =
    *      ALLVERSIONS                  =
    *      POPARTNER                    =
    *      POCOMPONENTS                 =
    *      POCOMPONENTSX                =
    *      POSHIPPING                   =
    *      POSHIPPINGX                  =
    *      POSHIPPINGEXP                =
    *      POHISTORY                    =
    *      POHISTORY_TOTALS             =
    *      POCONFIRMATION               =
    It gives me messages saying that
    Please also populate interface parameter POHEADERX
    No data changed
    Where am I going wrong..
    Waiting for your replies....
    Thanks,
    Chaitanya

  • Updating Z table using BADI CUSTOMER_ADD_DATA_CS

    Good morning guys,
    I need to update some tables Z through some information that I put in a new tab. The problem is I do not know which method I should use.
    If anyone can help me I appreciate it.

    Lucas,
    Just a thought -- BADI CUSTOMER_ADD_DATA_CS seems to be more at a screen flow level. Need caution while updating Z table here.
    I would recommend using BADI CUSTOMER_ADD_DATA-CHECK_ALL_DATA/SAVE_DATA methods.
    Method CHECK_ALL_DATA will be executed right before saving and has access to all tables which are ready to be updated. Final validations before updating Z tables can be performed here. Develop a FM to update Z table and call it in an UPDATE TASK in this method.
    Thanks,
    VM.

  • Try to update a table using resultset and nothing happens

    I am trying to update a table in my database.
    I already know the row I want to update by the reporttrikid in the where clause.
    Nothing happens when I run this code. It does not fail but my table never gets updated.
    I have done inserts and selects with no problem, but I must be doing something wrong when it comes to an update.
    Can someone please help?
    try
    conn = XCConfig.getInstance().getConnection();
    logger.debug("connection: " + conn);
    sql = "UPDATE " + REPORTTABLE + " SET " + REPORTTRKMISC + "=?" +
    " WHERE " + REPORTTRKID + "=?" ;
    logger.debug(sql);
    stmt = conn.prepareStatement(sql);
    logger.debug("sql TRKID: " + "");
    Iterator it = List.iterator();
    while (it.hasNext()){
         XCDocPriceFilter filter = (XCDocPriceFilter) it.next();
    //filterTrkId = filter.getTRKId();
         //trkid = Integer.parseInt(filterTrkId);
    trkid = filter.getTRKId();
    logger.debug("Update trkid: " + trkid);
    stmt.setString(1,trkMisc);
    stmt.setInt(2,trkid);
    rs = stmt.executeQuery();
    }//end iterator
    rc = true;
    }

    I am still not getting anything updated.
    I am using the following code.
    int updateCount = stmt.executeUpdate();
    logger.debug(updateCount + " records were updated!");
    The logger says it has been updated, when I go to the
    table the table has not changed.Is your connection in auto-commit mode? Maybe it hasn't committed it (yet). Did you also remember to close your JDBC resources (rs, stmt, conn)?

Maybe you are looking for

  • Import Corruption in Lightroom CC?

    Can anyone suggest what is going on with this import corruption in Lightroom CC?  Reinstall LRCC?  First photo imported with LRCC; second imported with Nikon Transfer.  Both imported in NEF and these are SOOC jpg conversions.  Thanks. LR CC Nikon Tra

  • Illustrator CS3 not responding message

    Mac OX X 10.4.11 G5 2 GB RAm Recently message when opening files Illustrator CS3 not responding.Takes forever but finally opens up. Deleted Prefs,com.adobe.illustrator.plist etc Plse Help

  • Trouble with BDK Installation over J2SE 1.4

    Hello I am having trouble with installing Bean Development Kit 1.1. The BDK 1.1 can't seem to be getting installed on the J2SE 1.4 Java VM. The LaunchAnywhere installer runs and then reports the following error. "Can't Launch Executable (Windows erro

  • Upgrade to elements 11 - how to find photos from elements 3

    My new computer runs windows 7.  All files have been transferred (by computer store staff) to the new one. I have elements 3 which worked fine on my old computer.  But the application won't open on the new computer; I get "lack of or invalid registra

  • I was installing the latest version of Flash player for IE.

    I received an error message that said Script Error saying that an object was expected.  I have the latest version for Google Chrome but I can't get Internet Explorer updated to the latest version.  Help!