Updating license data not possible [Maintenance Package]

Hi,
I want to activate Automatic Maintenance Certificate Renewal via solution manager system as per SNOTE: 1280660.
SOL MAN: ST400 SP 18
SCM : ST-PI 2008_1_700 SP 01
when i run Maintenance package in my managed (satellite) system i got the log as below.
Updating license data not possible [Maintenance Package]
No active master Solution Manager destination maintained. [Maintenance Package]
Updating license data completed from destination  [Maintenance Package]
Maintenance Package completed
when i run Maintenance package in my Solution Manager system i got the log as below.
Refresh sessions from destination SM_KSMCLNT000_BACK started [Maintenance Package]
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT000_BACK
> Logon not possible (error in license check)
> Sessions cannot be refreshed from destination SM_KSMCLNT000_BACK ( KSM , 0020472195 )
Refresh sessions from destination SM_KSMCLNT000_BACK finished [Maintenance Package]
Refresh sessions from destination SM_KSMCLNT001_BACK started [Maintenance Package]
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT001_BACK
> Logon not possible (error in license check)
> Sessions cannot be refreshed from destination SM_KSMCLNT001_BACK ( KSM , 0020472195 )
Please anyone facing the same or related issue, give me a suggestion..
Thanks,
Manikandan B

Hello Manikandan
The error indicates that there is an issue with the *_back RFC destination
itself.
Have you done an authorisation check within SM59?
Utilities > Authorisation check?
You can also do so by testing the connection in SDCCN.
Goto > Taskspecific settings > RFC destination > Backdestination
This problem is often caused by the user in the RFC connection
being locked in the Solution Manager.
Make sure the RFC user account is a communication user so the password does not expire. Sometimes the password expires and the RFC user locks the account as the old expired password is provided too many times.
The message also indicated "No active master Solution Manager destination maintained"
Please make sure the relevent Solution Manager system has been marked as Master in SDCCN Goto > Taskspecific settings > RFC destination >
These are things you will want to check.
I hope this information helps you resolve this problem.
Regards,
Paul

Similar Messages

  • Request does not contain any saved update rules; rollback not possible

    Hi,
    In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
    It failed due to activation error SID Generation.  But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
    Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
    If we try to delete, it shows job has been completed successfully with the following message:
    Job started
    Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
    Delete running: DataStore object ZREBATE, from 630,138 to 630,138
    Delete is scheduled; Selection conditions were substituted
    Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
    Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
    Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
    Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
    Job finished
    I went to the table RSICCONT and checked the mentioned request.  But I couldn't find delete option enabled.  Even our basis team doesn't have authorization to delete the  mentioned request from the standard table RSICCONT.
    Request you to please help me how to handle this.
    Regards,
    Antony Jerald.

    Hi Antony,
    Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
    1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
    2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
    3) change the records with respective values and active the request again
    Regards
    Jagan

  • Problem with smart Playlist after Upadte to 10.6 - PLEASE UPDATE SOON, Backup not possible

    Apple, Apple, Apple... (again)
    Is it so difficult to let things, that are quite good, just there where they are??
    After updating my iTunes, OS Lion and some other stuff 2 days ago, I have now a big problem with a smart Playlist in iTunes 10.6. Before updating all things was right.
    The problem: Now, AFTER UPDATE, my Playlist ist totally empty!
    Before they were over 2000 songs in it.
    And because this is my major-smart-Playlist, which is established to my whole other Smart-Playlists, the other ones are also empty.
    And this is not the first time Apple.
    It´s good, if you - apple guys - just added something like new categories to sort of music (like "iCloud-Status" or some others).
    BUT WHAT DID YOU THINK, WHEN YOU DELETED THE OPTION "VALUATION" - mh??? (I hope in english this is the word that used in Itunes - my iTunes is in German)
    So I don´t mean the "lines" - I don´t know the right english word - when you see the music. There you can fade in "Album-Valuation" - new -  AND  "Valuation" - old.
    But I mean in the options of the smart-playlists - THERE ARE ONLY "Album-Valuation"!!!!! What the heck....
    EVERYONE NEEDS THE NORMAL Song-"Valuation" - and not the album (because normaly you decide by each track how good he is and not by the whole album).
    You can let the Album ones in it, BUT PLEASE BRING THE NORMAL ONE BACK.
    So, in my case, I tried to go back to iTunes 10.5.3 with my nice Time-Machine-Backup. So, but I couldn´t because there came a bug-message that said something like "It is not possible because OSX need the Programm".
    What is that?
    I also couldn´t delete the iTunes app from my app-folder.
    So, and now?
    I had to totally restore my volume !
    What is that for a solution?!
    So please think before you delete any functions, who is needed by many people.
    And if you did, maybe ask some users, that uses  for example smart-playlists alot, if there is a problem about some changes, you want to add.
    I hope anyone from Apple read this and also answer me. Because I´m upset about that.
    In every iTunes-Update I am concerned about what will be after the update.
    For example in the past, there was more than one changes in iTunes with the Valuation. First, there was just whole stars to set for every song. Than, after a long time, Apple decided to give the options for also half stars. So I said to myself - hey that´s great, that I don´t have to use external apps anymore to set these. So I did this to many of my songs (and that´s many).
    Than - after an Update - wow, all half stars rating are gone ! Great Apple, really great.
    I was VERY upset.
    So after an other update, the opportunity to give half stars are back.
    I thought, my god, it is so difficult to talk with other guys, that worked before on iTunes if I am new or just to look if there was already a change in that part of the app???
    So, apple guys, please don´t think that I want to attack you. But please be more carefull in the future. I hope that I don´t have to worry too much about so stuff. I really have better things to do with my time.
    So, have a nice weekend.
    Greetings from Germany.
    Marco Blum

    Hi..
    Use Lion Recovery  to reinstall the Mac OS X.

  • Cannot purchase records/"processing of credit card data not possible"

    Since last Tuesday I cannot buy records at iTunes store (Austria). Whenever I click the "purchase" button the systems sends back the message that "currently the processing of credit card data is not possible".
    That's interesting as I have been handling my purchases since months using a Click and Buy account without any problems.
    The ITS support team did not yet answer to my request.
    Any ideas how to fix? Thx!
      Windows XP Pro  

    The security code is the 3 or 4 digit code outside of the actual card number (and NOT the same as your PIN). It is usually located on the front of AMEX cards and on the back of Visa and MC. You typically wouldn't need that for purchases in a physical store. Log into your AppleID, modify the payment method  and set it with the proper code.

  • Changes in Retroactive account time date not possible  error

    Hi
    This employee is joined on date 20.01.1969 after that this employee prejoin on  09/04/2009 and we are trying to change the join date by using transaction code PA41. i am getting the below error message.
    'Change in earliest retroactive accounting date time not possible!.'.
    I checked the table (T569R) and i changed the value in Time evaluation fields like 01.01.1900 through table level after that I am not getting error message I am able to create the employee but I want to do the configuration  level for that
    Please provide me the step by step procedures do to the configuration.
    before changes  in table T569R
    01 01 01.01.1990 Incentive wages
    01 02 01.01.1990 Time evaluation
    01 03 01.01.1990 Time statement
    01 04 01.01.1990 Pair formation
    after changes in table T569R
    01 01 01.01.1990 Incentive wages
    01 02 01.01.1900 Time evaluation
    01 03 01.01.1990 Time statement
    01 04 01.01.1990 Pair formation
    Please help me to resolve the above issue.

    This error comes due to 2 dates set in the system
    1> Employee level restriction - PU03
    2> Payroll Level restriction - PA03
    Since you are not going too retro (4/9/2009) so most likely it would be employee level.
    Check his IT0003 and edit the dates using tcode PU03 or PA30 -> Utilities -> Change payroll status.
    Also when you are trying to change the infotype, make sure you give the correct date as start date (04/09/2009)
    Regards,
    SC.

  • Change description general ledger master data not possible for some languag

    Hi all,
    We have a lot of language translation on tab Key word/translation for all G/L accounts. English is our log in language. When we want to change the description in Finnish, Norwegian and Danish this is not possible (this lines are grey, only display mode). We can´t remove these lines and we can´t change them. It is possible for all other languages except this languages and English. Does anyone have a clue why this is not possible?
    Thanks in advance!
    BR L

    Hi Lisa,
    I was asking if you can maintain a new description (for an account number where no description in one of the mentioned languages is entered) so the message "Description already exists in language XX" should not appear in that case...
    In general, account descriptions are stored (for chart of accounts / language key) in table SKAT thus you can check the entries already available.
    Did you contact the user-authorization responsible which authorization objects are assigned? FS00 contains authorization objects for account auth. group (F_SKA1-BES), company code (F_SKA1_BUK) and the whole chart of accounts (F_SKA1_KTP), maybe some change authorization (activity 02)  is missing?
    Best regards, Christian
    Edited by: Christian Ortner on Nov 22, 2010 1:06 PM

  • Raw update needed but not possible

    Lightroom 5 keeps complaining that I need to update Pshop's raw app to 8.3.
    In Photoshop CC, the Update menu results in "everything is up to date"  -- even though Raw 8.2 is there.
    -- I tried the super-secret Raw update installer. It resulted in an "illegal operation" type message.
    -- I deinstalled and reinstalled Pshop CC. It installed Raw 8.2!
    -- FWIW, Premiere Pro is also outdated but CC app also says it's up to date.
    -- Isn't Creative Cloud supposed to replace Adobe Application Manager? Why does the CC app and AAM take turns popping up to offer (erroneous) information?
    Surely there is a way to tell the Creative Cloud to reset my application list.
    I have spent hours trying to resolve this over the past few weeks.
    If you tell me to de-install and reinstall the entire Creative Cloud, I'll request a $100 credit. I have already lost at least a day of production trying to troubleshoot this.
    MacPro, OS X 10.7.

    A reinstall of CC Desktop does not rebuild the inventory folder. That is the issue. An uninstall and reinstall does appear to rebuild the Photoshop part of the inventory, but Camera Raw has is a separate component as far as the inventory is concerned. There is no Camera Raw uninstaller that I have been able to turn up. If the Camera Raw data in the inventory folder is for the wrong version or is not there at all, the Camera Raw installer will not run. That is what makes it unrecoverable. It took me all of 7 months to get past the India based support (who really don't have the training to even understand the problem) to somebody who did. A couple of weeks with him did not really resolve the issue either, but now I at least know what the issue is. We will see tomorrow when the 14.2.1 update is release whether or not the reinstall of Photoshop actually resolved the problem I was having with that ifailing to update too. I've reinstalled the CC Desktop Application at least a dozen times, and Photoshop CC at least 4 times, but tech when I contacted tech support on the failure of Camera Raw to update, they always had me delete the whole inventory flder, which kills pretty much any updates. It's a really ugly situation. I'm told that the day before I actually got through to an American support person, the notice went out to India to stop deleting the Inventory folder. The real solution is a simple check  that inventory matches reality, but as of now Adobe doesn't do that. If there was a Camera Raw uninstaller that could be made to work (if there is one in the installer, it craps out before the uninstall option is available). Without the uninstaller, there is no way to get the installer to run, which mens that the only way to install the updated Camera Raw plugin is by drag & drop from the installer package or from another installation. This does not update the inventory folder, so the next time an update is available for Camera Raw, CC Desktop will not see it. If it doesn't see what it is looking for, it announces that everything is up to date and offers no install option. It's sloppy programing for sure. Why it hasn't been fixed already is beyond me. Hopefully it will be in the near future. But as of now, if there is a way to do it, nobody at Adobe seems to know what it is. As I noted I have an experiment planned for the next Camera Raw update, which as far as I know isn't tomorrow. At the moment I am medium sure that Photoshop will update properly tomorrow but even that is an unproven assumption at this point. You will almost certainly think this makes no sense, and no one could agree more than I do, but that is the situation as it stands. As for time wasted, I have spent many full days working with tech support at verious levels getting told to do exactly the things which will make it worse, or letting them take control of my computer and do the make it worse thing themselves. At one point they even had me uninstall the CC Desktio app WHILE IT WAS RUNNING AND IT ACTUALLY DID REMOVE THE FILES WHILE LEAVING IT RUNNING IN MEMORY!!!! The resulting crash caused a huge amount of corruption on my HD which took another full day to recover from. Adobe promise me credit for time lost due to failure to update, but so far I haven't seen a dime. A happy camper I ain't, but there may be a light at the end of the tunnel.

  • Java platform and Java Deployment should be updated but there is no other version, always the warning to update but thats not possible

    Java Platform 7u9 and Java Deployment Kit plug-ins are yellow and asked to be updated.
    The problem is that there is no other version than I have already installed.
    Even if I try to instal this latest version again I've get the message that I already have the latest version.
    The same problem was with Flashplayer where I installed the latest version but three days Firefox asked to update the plugin.
    The last one is now ok but Java Platform and Java Deployment Kit is hopeless.
    Why it ask for an update if there is none?
    What should or can I do? I always be careful and patch my pc if necesserry.
    All my friends who are working with Firefox have the same problem.
    Can anybody tell me whats going on here?
    greetings, Mimi321

    Hi
    There is still an issue for me. When i check to see if add-ons are up to date it identifies "Java(TM) Platform SE 7 U9" as out-of-date and gives me an orange "Update" action. When i hit this it takes me to the Java website giving me "Recommended Version 7 Update 9". This is the one i've already got so i cannot get rid of the orange Update action buttons.
    Furthermore, if i try the link earlier in this thread to test to see which version of Java i should be using it says "Congratulations! You have the recommended Java installed (Version 7 Update 9)" so i'm not sure what this talk of version 7.10 is about?

  • Material Staging/Availability Date not possible to change

    Hello,
    If I create a sales order with a configurable material and I got subitems related to the main material, into the "Procurement" tab I cannot modify manually the field Material Staging/Availability Date (VBEP-MBDAT) for the subitems.
    I only can change the date related to main item.
    Do you have any suggestions why I cannot change those dates?
    Thanks
    M.

    Hello,
    I checked it and it is not set ("Do not form delivery groups") ... and it should be ok, isn't it?
    if I add manually the same sub item with the same item category, than I can modify the Material Staging/Availability Date ... but this is not what we want do.

  • How activate Camera Raw for Elements 11.Update button is not possible!!!

    Hi @all,
    i have Elements 11 and can not activate the update for Camara raw . At the moment is version 7.1 active.....but i need a higher version for my cameras. So what can i do now?

    I downloaded DNGConverter_7_4.exe but i have the same problem ....Element can not open the raw files of my camere because Camera raw 7.1 is active....how can i change it? Sorry for my bad english ....anybody here for german?

  • First update ok, second not possible...

    Hi all,
    Got my Nano recently (my first iPod).
    I have the latest iTunes (5.0.1) and have the latest Nano firmware (1.0).
    I have found when connecting my Nano it updates fine. If I then go to update again (right click and select update) it tries but then I always get the message:
    "The disk can not be read from or written to"
    If I maually disconnect the Nano and re-connect it it again syncs fine the first time but not the second.
    This is both an annoyance and a major problem as if I wish to change the iPod properties - i.e. add a photo dir or change my podcast settings - it looses these changes when I disconnect. The only way around this that I have found is to quickly make the properties changes whilst it is still updating - then it keeps them.
    I have reset and restored the Nano, tried different hubbed and non-hubbed USB ports, re-installed iTunes. Nothing works.
    Has anyone else had this - can you help?
    Rich

    You might want to enabling Disk use to see if this acts as a workaround in the short-term. Typically Disk Use requires you to manually eject the iPod prior to disconnecting it from the computer. Perhaps this will keep the connection live for you.
    My Shuffle has a very similar behavior since applying the lastest firmware update (iPod Update 2005-09-23).
    My hope is that another update is coming soon that will correct the problem.
    Best Regards-
    Randy

  • Data collection task in Update mode is not posible with Original list

    Hi Friends,
    When I try to Execute the Task for data collection in sa38.I am getting the Error with in 9 sec.
    UPDATE MODE IS NO POSSIBLE WITH ORIGINAL LIST
    Message No. UCS0111
    Diagnosis :
    If you select the indicator"original list"the current task status is ignored.In this case,the system simulates a task run in with all of the organisational units are not yet blocked.Thus,setting this indicator is meaningful and valid only if the task is executed in test mode at tthe same time.
    procedure : select the original list & Test run together.
    My problem is I can not select the Test run in production  server.
    Can any one please help me to solve the Issue.

    I Thank you all for Responding to me.
    Hi Dan,
    SA38 provides all the needed parameters- Con.Group,Company,Version,Fis.Year,Period,Group currency.
    Iam trying to run the task with SA38 for Data Collection.
    Hi Lucio,
    When I Check the Fields Both the  Log & Original list . The programe gives an error message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
    Even when I tried with Log,Test Run & Original List Iam getting the Same error Message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
    I can run the task Successfully with selecting the Log option only. But my Client need  to Use both Log & Original list ( as they used to run in BIW 3.5 ) Now it we are using BI 7.
    Hi Christopher,
    We are running the programe UCBATCH01,with the T code SA38.
    Hi Eugene,
    I will look in to the link and i will Discuss with the Basis team.
    Once again Thank you all for responding
    Suraj.

  • CIF queues - Lock not possible error in application log

    hi,
    Below is the application error log from SLG1
    Looks when R3 is sent CIF queue, could not be processed at APO, due to lock not possible. It looks, the object is already locked.
    This happens only certain hours only. We searched in batch jobs etc across landscape, but no luck.
    We are currently checking, if this could be due to some issues with LiveCache processing.
    Any input would be helpful.
    SLG1 - Application log errror:
    Source system: sapapp80 user: R3CIFRFC transaction: function module: /SAPAPO/CIF_CLAF_INB
    Access block: data from system CLAF updated again
    Lock not possible for charc at FM claf_inb:000000000100020361G21C02244Z
    Object is locked at present
    Thanks,
    RajkS

    Hi Raj,
    Pls check the table CIF_IMOD details in R3 System,if 2 IM running with the same object we use to get these kind of
    locking issue.
    also check the workprocesses details during those time. whether you have enough space to process the reqd the
    t-data.
    Regards
    DPS

  • Posting with trans.type 200 not possible

    Dear Gurus,
    when I try to scrap the asset,  I am getting an error as below
    Posting with trans.type 200 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 200 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    Thanks in advance and Regards

    Tried all Transaction types. 
    Sometimes I get this error
    Retirement of old assets data not possible (No existing old assets data)
    Message no. AA416
    Diagnosis
    You have tried to post an retirement based on amount, using a transaction type which refers to old assets data (acquisitions from previous years).
    However, the sum of the APC at the start of the fiscal year and the transactions, related to the past, equals 0.
    Procedure
    Check the transaction type entered and the asset.
    When I tried for other company code it is working
    Compared the configurations of both the company codes.  Everything is same.
    We are using Group Assets.  Group Asset is a required field in Tax Depreciation Area.  I am giving that. 
    Is there anything else I need to check?
    Please help.
    Regards

  • Updating operands: Not possible to maintain before a certain date

    Hello,
    When I try to insert an operand value in ES31, I got the following returned message "Not possible to maintain before XX.XX.XXXX", where XX.XX.XXXX is the End Billing Period of the last bill. In my understanding, SAP does not allow updating an operand before the last bill, right? I need to maintain an operand value. Is there a way to insert an operand value before the last bill?
    Thanks so much,
    Sukasom

    The problem is that we can not reverse the bill, because the customer had paid already.
    We have a case where the orginal bill was incorrect, so we did the manual bill to either return the money or charge the customer more,
    and then we need to insert operand value to maintain the past consumption.
    Thank so much

Maybe you are looking for