Updating to Lion on my macbook and not able to access iPhoto

I have updated my macbook (Mac OS X) to Lion but I can't seem to update iphoto. I have no access to iphoto and there is a wheel that continually spins saying it is updating, but it is now Day 7 and there is no update and there are no photos. Help!

You need to contact Sonos to get support.
https://sonos.custhelp.com/app/answers/detail/a_id/1049
MJ

Similar Messages

  • HT3258 I was on Snow Leopard and it allowed me to get into my hospital computer system and applications. I went to Mountain Lion on my Macbook and now I cannot access any of the applications. I need Java which is installed. It is called I 3 system and is

    I was on Snow Leopard with no issues accessing my Windows and Java based hospital computer system . I swithced to Mountain Lion and now I have NO access to any of the hospital applications remotely. Is there a way I can get back to Snow Leopard or manipulate Mountain Lion to allow me to access my hospital system?

    davidmarr wrote:
    Is there a way I can get back to Snow Leopard or manipulate Mountain Lion to allow me to access my hospital system?
    Restore the Snow Leopard bootable backup/clone or the Time Machine backup. As for making ML work, I've not a clue since I don't do windoze or access things remotely. You'll have to wait for one of those gurus to pop in or just post what's happening when you try at the ML forums.

  • I changed my wheel group properties to no access at top disk level.  I messed up, how can I change back in single user mode "command s" as I am now in Thailand and not able to access startup disks?

    I messed up, I changed my "Wheel group" properties to No Access ( or something other than the default) at the top level of my startup disk "Macintosh HD".   Now my computer won't start up, I just get the spinning wheel of death.    I also am in Thailand right now, so I cannot go to a Genius at an apple store, nor do I have startup disks available.
    So I was hoping there was a way to change back the properties of my disk (Volume) in single user mode (via Command +s) during startup, i.e. can I do a chmod command on the Macintosh HD listing under the Volume Directory.    Or where do i fix this?   Is it fixable without startup disks, etc...
    THANKS FOR ANY HELP!!!!
    If you could also please let me know you have an answer, I WOULD REALLY APPRECIATE IT!!! 
    thanks so much
    mark
    <Edited by Host>

    Thomas,
    Thanks for the info on command-R, didn't know about that!!!
    Yes I changed the sharing "Wheel Group" permissions on my hard drive via Get Info.    But that's all I did.    And then most of the apps wouldn't respond with anything.    So not knowing I did something stupid, I decided to re-boot, and then nothing but the Wheel of Death at startup.
    I was trying to limit access to my computer on this network, changed my public folder settings, and then I thought why not the whole hard drive, but at that time I had no idea what the "Wheel Group" was... so I shouldn't have touched it, BUT IT DID ...... argggggg....
    I managed to go to an internet cafe & research the problem yesterday.    I used the command +s single mode to get in, and then did the necessary steps to mount the drive so I could make changes.   I basically did this:
    Boot into single-user mode (boot while holding down CMD-S)
    Follow the on-screen instructions to mount the file system as read-write (a fsck command followed by a mount command)
    Type the following: "chmod o+r /" followed by "chmod o+x /"
    Type "exit" to leave single user mode and complete the boot sequence.
    I found it at this link http://forums.macrumors.com/showthread.php?t=416180
    It worked... thank God!!!   Well so far so good.   
    I was going to try my own fix by chmod on the Hard drive listed under Volumes directory, but that doesn't seem to match the info under Get Info Window.    So I just used the fix above.    I probably should now go and do "Disk Utility - repair permissions", however I am a little gun shy right now, so I will probably wait until I am back in the States so I can go to an Apple store if it messes up.   Right now I'm following the "if it ain't broke, don't fix it" MOTTO...
    So Thomas I just wanted to say THANKS for replying so quickly, and I really appreciate your help!!!
    (yes I know I shouldn't have used my email addresses, but I WAS DESPERATE, but that's still no excuse)
    Hopefully maybe this thread will help someone else out in the future....
    Okay, thanks again!
    Mark

  • Finder window: Grey spinning wheel in status bar and not able to access files?

    Can anyone help with this issue which has utterly perplexed me for 24 hours now.
    I have all of my photos and videos stored on an external hard drive. Yesterday the hard drive started misbehaving and when I tried to access files it would simply not load them, the folders would appear empty (even though the files were there) and a grey spinning wheel would appear at the bottom of the finder window. This would then cause the finder to (sometimes) slow down and require restarting.
    This has continued today, the drive seems to be okay according to Disc Utility, Disk Warrior and TechTool - all of them showing no errors but the drive continues to behave very strangely. To be safe I am transferring everything to another drive as we speak.
    In the finder status bar a grey spinning "wheel" will appear in the bottom right corner whenever the drive tries (and subsequently fails) to load content. Here's a screenshot, notice also the icon for the drive changes to a blue icon with a series of wavey lines:
    I've no idea what is causing this or why its happening. It's very odd and the drive will act okay until you try to access files, then it will just indefinately show the grey spinning wheel.
    Strangely a moment ago all of my drives became "read only" (including the Macintosh HD) and were ALL doing this. The problem only occurs when my current Media external hard drive is plugged in, so I'm transferring everything off it (which I hope will be successful). It does this on any machine its plugged in to, yet it's not got any problems according to various tests with disk utility etc.
    Any help?

    i was getting the spinning grey wheel in status bar, with no files displaying.
    this thread describes re-launching Finder - which did the trick for me - though my issue was with the internal hard drive, not an external
    https://discussions.apple.com/thread/3649473?start=0&tstart=0

  • Not able to access ACS 5.1.0.44

                       Hi
    I have two ACS appliance ver 5.1.0.44. I configured with replication and it was working fine. Last month my primary was down and not able to access but able to ping. I tried and Google it in Internet I couldn't find any answer to resolve the issue after reimage the appliance its starts work fine. Again now I am facing the same issue. Please advice without reimage how to resolve the issue.
    Thanks and Regards,
    Hameed

    Please ssh into the appliance and issue a show application status acs:
    ACS role: PRIMARY
    Process 'database'                  running
    Process 'management'                running
    Process 'runtime'                   running
    Process 'adclient'                  running
    Process 'view-database'             running
    Process 'view-jobmanager'           running
    Process 'view-alertmanager'         running
    Process 'view-collector'            running
    Process 'view-logprocessor'         running
    if you need to start any of these services manually for example the management service:
    admin# acs start management
    Thanks,
    Tarik Admani

  • I want to update to LION,on my Macbook Pro duo core, (october 2006) because Adobe CC needs at least that. I know my computer is old, but works perfect to me and I do not want to stay in Adobe CS6 since I have access to Adobe Cloud CC. Please help.

    I want to update to LION,on my Macbook Pro CORE 2 DUO, (october 2006) because Adobe CC needs at least that. I know my computer is old, but works perfect to me and I do not want to stay in Adobe CS6 since I have access to Adobe Cloud CC. Please help.
    I probably dont want to go to Mountain Lion either because I've heard that it will slow down my computer, So, Lion 10.7 will be the perfect OS X for me.
    I have ne newest release of Snow Leopard installed and works great.
    Thank you ALL for your help.

    you will be ok updating to the new software but there will be some trade off. i have 3 macbooks 2006 that are all running the latest versions.
    some of the trade off are
    1-2 less of battery life
    slow wake ups from sleep
    slower start up time about 30-40 seconds longer then what you have now
    the operating system will use high % of your processer while idealing
    these are not the things you want to hear about a new os compared to the old one but this is how it is even with a new macbook pro. but it's not the end of the world. just make sure you have at least more then 2GB of ram and have a good harddrive and you will be ok.

  • I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

    I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

    iCloud should still help you reduce some hard drive space. Just select "optimize" in the icloud tab in Mac Photo App preferences.
    Granted, not the same as completely offloading your library to a back-up drive at your location.
    Good Luck!

  • I updated to Lion OS10.7.5 and I have duplicate contacts that will not merge.  How do I fix this?

    I updated to Lion OS10.7.5 and I have duplicate contacts that will not merge. The duplicates were created when I synced my phone (which I have done a hundred times!) How do I fix this?

    Try the 10.7.5 supplemental update.
    http://support.apple.com/kb/DL1599

  • Lsince update to lion osx my imac will not mount windows created video dvds my othe imac running snow leopard will

    since update to lion osx my imac will not mount windows created video dvds my other imac running snow leopard will

    You could've backed up your iPad prior to the "forced" upgrade which, by the way, you could have cancelled. iTunes doesn't upgrade your iPad, automatically, on its own. You had to click the Upgrade button to initiate the upgrade. You didn't have to do anything with that button. You can just leave it be.
    iOS 8 is garbage on iPad 2 and 3 and even though iTunes keeps giving me the Update button option, I continually choose to ignore it.
    Ignoring the Upgrade/Update button doesn't affect the normal iTunes/iDevice syncing/backing up operations.
    You could've just left that button alone.
    When was the last time you backed up your iPad?
    While there is no way way to revert to a previous iOS version once you upgrade your iDevices iOS, iTunes saves multiple backups of your iDevice and if you backed up your iPad previously to this latest activity, you should be able to restore your iPad from an older  backup that should appear by date when  you plug your iDevice into your Mac, was for iTunes to launch and sync your iPad, then cancel the backup in progress and use the Restore function in iTunes to restore your iDevice from another previous backup version date.
    If your current version of iTunes doesn't recognize your iPad2 under iOS 8, you need to check the iTunes update feature, in iTunes or in OS X Software Update feature in OS X Preferences panel to see if there is a iTunes update available for OS X 10.6.8 Snow Leopard.

  • Since I have update to Lion I have my print not scanning .My classic FTP not supported anymore

    Since I have update to Lion I have my print not scanning,.  My classic FTP not supported anymore!!!! what is goin on with this update??????

    Recover the backup you made before you installed.  If you didn't backup, make a backup down, and selectively recover pieces of the backup that will work with the older operating system after erase and reinstalling 10.6.  See my backup FAQ*:
    http://www.macmaps.com/backup.html
    Before you do, you may find your scanner preferences in your printer just need to be set in the Print & Scan preferences in Apple menu -> System Preferences, or some open source scanner and printer drivers can work better*: http://www.macmaps.com/printersx.html
    http://www.macmaps.com/macosxnative.html#SCANNER
    And in the future ALWAYS backup your data before you install anything.  That way you can recover where you went before.  Don't cross post in the forum if you can avoid it.  Remember this is a user to user forum, so responses may take awhile if you didn't post in an area that really is related to your question.  Issues with Lion are best handled in the Lion forum.  But as long as I have a chance, I'll respond to this thread.

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • I purchased Mountain Lion on my MacBook and want it on my mac desktop as well. Can I download the same purchase on my desktopMac? and how do i do that?

    I purchased Mountain Lion on my MacBook and want it on my mac desktop as well. Can I download the same purchase on my desktopMac? and how do i do that?

    Welcome to the Apple Support Communities
    When you purchase Mountain Lion, you can install it as many times as you want on all your computers for free. To install it on the desktop, open the App Store, go to Purchases tab and download OS X Mountain Lion.
    Another option is to redownload it on the MacBook, put the installer onto a USB drive and connect it to the desktop in order to upgrade

  • HT203163 I am not able to access to iphone updates/store; as secure link to itunes store failed. I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works.....

    I am not able to access to iphone updates/store; it displays the message under diagnostics 'secure link to itunes store failed'.
    I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works......
    Please help.

    Update:  I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
    I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
    How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure?

  • I have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any sugg?

    i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?

    This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.

  • I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

    I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

    Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
    Just go to the Library module, search for the desired photos, and resume working on these photos.

Maybe you are looking for