Upgrade 10.2.0.4 32bit to 11.2.0.2 64bit on Windows 2008 64bit problem

I am on a remote machine logged into the console as a user in the admin group with 10.2.0.4 32bit up and running. I installed 11.2.0.4 64 bit, choosing to do software only. I then ran DBUA to upgrade the DB. In the Progress box, Perform Pre Upgrade and Upgrading Oracle Server are successful. However, on Upgrading JServer JAVA Virtual Machine, it runs for a while and then I get ORA-03113: end-of-file on communication channel. This is a test box in preparation for beginning to install on our customers. Has anyone else run into this?

Hi,
I am on a remote machine logged into the console as a user in the admin group with 10.2.0.4 32bit up and running. I installed 11.2.0.4 64 bit, choosing to do software only. I then ran DBUA to upgrade the DB. In the Progress box, Perform Pre Upgrade and Upgrading Oracle Server are successful. However, on Upgrading JServer JAVA Virtual Machine, it runs for a while and then I get ORA-03113: end-of-file on communication channel. This is a test box in preparation for beginning to install on our customers. Has anyone else run into this?I suggest you to log a service request with oracle.
Refer link: http://myracle.wordpress.com/2009/04/09/issues-with-java-virtual-machine/
Hope helps.
Regards,
X A H E E R

Similar Messages

  • Upgrade Oracle 9.2 in 32bits(WIN2K) into Oracle 10G in 64bits(WIN2K)

    Hi,
    I want to upgrade Oracle 9.2 in 32bits(WIN2K) into Oracle 10G in 64bits(WIN2K) all in 4.6D.
    I have installed:
    the Oracle 10.2.0.4.0
    a central instance with the template CENTRAL.R3S
    i started to install the database instance on the target system
    with the R3Setup template DBR3CP.R3S
    I try to apply the note 932722, I find myself in the same procedure
    point 6) c).
    The following error message:
    Tue Jan 26 21:52:45 2010 - Database service to be upgraded:
            Host = tirudev04
            Port = 1527
            Service = SAPServiceDEV
            ORACLE_HOME = E: \ oracle \ DEV \ 102
    Error: Database connection failed to
    sys / manager @ / / tirudev04: 1527/SAPServiceDEV
    Can you give me some help?
    Thank you.

    >Service = SAPServiceDEV
    This is probably the problem. you have to specify the Oracle network service name of the database you want to upgrade.
    SAPServiceDEV is an Windows account name under which the SAP System is started.
    Service = DEV will probably do the job.
    regards
    Peter

  • Upgrading R / 3 4.7 system to ECC6.0 with EHP4 along with windows 2008

    Hi All,
    I am looking for your feedback about the plan for upgrading our Landscape to ECC 6. with EHP4 from R/34.7E.
    Current Environment: R/3 4.7X110 with SQL 2000 in 32 bit windows 2003
    Planning to upgrade to the level of : ECC6.0 with EHP4 64 bit windows 2008, SQL 2005 Database
    Based on the previous experience in upgrade I have planned in the following ways.
    Since my basis component is in the level of 63, its possible for me to restore the SQL 2000 database in SQL 2005 (Using System copy tool )
    Step 1: Migration of OS / DB using system copy tool (R/3 4.7 with SQL 2005 in 64 bit Windows 2003 ), Then will leave the system for testing for some period and after the confirmation, planned to start the upgrade
    Step 2: By meeting all the prerequisites, Planned to upgrade to ECC6.0 with EHP4 on the OS / DB upgraded system.
    Step 3: Once the upgrade completed / With the confirmation from the functional and technical consultants, I planned to upgrade the windows 2003 to windows 2008 using system copy tool.
    Note: I am not using SQL 2008 - Project decision.
    The above mentioned plan is the only way(proper way) for doing such activities or is there any other way to shorten the project.
    I should not ask the below question (Even after reading PAM and SAP note 1054740), But kindly regret me for asking this one, out of own curiosity, i am asking the below one.
    1. Is there any possible to install SAP R / 3 4.7 in windows 2008 with 2005 (This will help me to shorten the project). I am completely aware that SAP wont support R/3 4.7 with windows 2008, if its not at all possible is there any other work around for me to shorten? Let me know your suggestions and thoughts
    Your valuable inputs will help me to proceed further with the plans (I surfed the SDN and read master guides already) . I really want to make sure , the way which i am going is the right one.
    Thanks and Regards
    Vijay Kumar

    Hi Jitendra,
    Hope you should check the PAM again , Its supported for sure and also for upgrading to EHP4 - SQL 2005 is the Prerequiste.
    Hi Abhi and Others,
    Thanks for all your support.
    I have successfully completed the project for my landscape and it was a great success too.
    As you all said, since I had the hardware availability and time frame as well. Hence, I have tried both the possibilities.
    Note :I would prefer and stick with the SAP proposed and supported way and even for my project I have followed the same. So I would recommend to stick with SAP supported one.
    But for the own technical interest I have tried the other option as well which is not supported by SAP and also faced some typical issues as well / but solved on my own with some tricks and other activities. So, this option is also possible but highly risked one and of course(more importantly) which is not supported by SAP. So, i would recommend to go with the SAP recommended way.
    Thanks for everyone and I am closing the thread
    Regards
    Vijay

  • Upgrade from 10.2.0.1 32bit to 10.2.0.4 64bit windows

    This scenario i have planned to make an attempt of my own..
    1) Plan to Migrate existing database from ( 10.2.0.1 ) 32bit to (10.2.0.4) 64bit database
    2)Existing DB is No archive mode,
    3)OS windows server 2003 Enterprise sp 2(32 bit)
    Migrate DB config
    1)Os windows server 2008 Enterprise 64 bit
    I need help from oracle gurus!!! how to migrate existing DB Upgrade from 10.2.0.1 32bit to 10.2.0.4 64bit windows
    1)how to take backup?
    2)how to upgrade oracle version?
    3)proper step to follow completed this task successful
    For database migration and upgrade activity...
    share your suggestions please
    Regards,
    Venk@t

    How big is the database ? How much downtime can you afford ? One option is to install 10.2.0.1 on the target, apply the 10.2.0.4 patch, create an empty instance on target, then export the database from the source and import into target.
    Pl be aware that 10.2.0.1 thru 10.2.0.4 are on sustaining support and 10.2.0.5 is on extended support (if you have paid the extended support fees). Why not upgrade to 11gR2 ?
    HTH
    Srini

  • Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?

    Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?

    I have been researching the exchange message loss  problem on other forums, but not seen a link to browser as yet.  The message loss problem we have here is in a 32bit PB.

  • Upgrade + migration from nw04 on windows 2000 to nw04s on windows 2008

    Dear all,
    I need to upgrade and migrate my nw04 java system from windows 2000 to nw04s on windows 2008.
    From the PAM I can see that NW04 is not supported on windows 2008 and that nw04s (7.0) is not supported on windows 2000.
    So, which is the correct upgrade path? Do I need an intermediate win 2003 server which is supported from both the releases?
    Thanks and regards in advance
    Federico

    Hello my friend
    This will be a very interesting project for sure. As you know, kernel 640 is not supported on win2008 and 700 is not supported on win2000, so here there must be a win2003 as a transition platform for this upgrade+ migration, not to mention migration from 32bit to x64 is also involved. You didn't mention the DB versions in source and target systems, as well as the SAP product you're trying to go with. Here's a brief checklist right now for what I can think of, once you're back with more details then let's make it intact:
    I assume your source OS/DB is win2000SQL2000 32bit, target one is win2008SQL2008 x64.
    1. Install a win2003 x64 server and SQL2000 32bit;
    2. Install a new SAP instance same as your source system release in 32bit compatible mode;
    note: if the system being migrated is BW, then be aware of that you might want to bring new features in SQL2008 of row compression and table partitions.
    3. Detach the source DB from old SQL2000, and attach it to new SQL2000; some post configuration for DB copy will be required (STM tool). Now you've finish a migration from win2000 to win2003 32bit;
    4. Start upgrading NW04 to 7.0, 640 to 700, find details in upgrade guide; Now you have your 700 instance on win2003 x64+SQL2000 32bit;
    note: since release 701(700 EHP1) is available now, which you might want to upgrade instead of 700.
    5. Change the collation 850BIN2 for SQL2000 32bit, detach DB;
    6. Since migration from 32bit to x64 cannot be done smoothly, now you have to uninstall everything and reinstall win2003 and SQL2008 x64, followed by a new 700 or 701 instance;
    7. Attach the source DB, post configuration for DB copy will be required (STM tool); Now you have your 700 or 701 instance on win2003 x64+SQL2008 x64;
    8. Detach the SQL2008 DB;
    9. Now go to your target win2008 OS, install SQL 2008 x64 and new 700 or 701 instance;
    note: there might be some restrictions for NW 7.0 on win2008, go with the latest release (SR3 or newer).
    10. Attach DB to this final OS/DB version: win2008 x64+SQL2008 x64, post configuration for DB copy will be required (STM tool).
    Helpful?
    Regards,
    Effan

  • Upgrade of Integation Services (Windows 2012 R2) on Windows 2008 R2 with Exchange 2013 SP1 DAG fails

    Here is the scenario:
    Legacy Host: Windows 2008 R2
    Guest VM: Windows 2008 R2 with Exchange 2013 SP1 DAG cluster.
    After importing the VM (2008 R2 and Exchange 2013 DAG) into a 2012 R2 host (Cluster).  (copy VM files to new 2012 R2host) Everything works fine.
    Then upgrading "Installation Services" (for Windows 2012 R2 host) on the imported VM runs fine with no errors to the "Restart" prompt. VM than shows: "Configuring Windows updates 32% complete. Do not turn
    of your computer." Hangs there for about 20 minutes until is says "shutting down". Hangs there for 20 minutes until power off. Restart to normal start; "Preparing to configure Windows. Do not turnoff your computer." proceeds slowly
    to "Configuring Windows updates 32% complete. Do not turn of your computer." hangs there again indefinite. Sometime hangs at shutdown cycle and "Configuring Windows updates 32% complete. Do not turn of your computer." indefinitely.
    I moved 20 other machines from a 2008 R2 host to new Windows 2012 R2 hosts all of these machines install the 2012 R2 Integration services just fine on the 2008 R2 VM. Just the 2008 R2 VMs clustered (DAG) and Exchange 2013 SP1 do not take the Integration
    Services upgrade.
    Any advise from Microsoft? I know I could decommission the DAG and Exchange machines and install Integration services on the native box before Exchange and DAG and that would sure work, but I'd rather avoid that amount of work for a simple integration layer
    upgrade.
    Thanks
    Gerhard Waterkamp ACSLA Inc.

    Hi,
    Could you try use the following method to fix this issue first?
    1. Run the System Update Readiness Tool, then check if there is any error in the Checksur.log and checksur.persist.log.
     1. Please run the System Update Readiness Tool on this affected server. Please download this tool from the following Microsoft article:
     Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7
     http://support.microsoft.com/kb/947821/en-us
    2. The System Update Readiness Tool creates the log files that captures any issues that the tool found or fixed. The log files are located at the following location:
    %SYSTEMROOT%\Logs\CBS\
    3. Please paste the checksur.log here for analysis.
    If there is no error found, please try the following step.
    ==================================
    2. Use Fix it tool to reset the Windows Update components.
     1. Open the following link.
     http://support.microsoft.com/kb/971058/en-nz
     2. Select Windows 8.1, Windows 8 and Windows 7 in the product selection box.
     3. Click “Run Now” to reset the Windows Update components.
    Note: We can reset the Windows Updates manually by following the steps in the KB above.
    3. Use the System File Checker tool to repair missing or corrupted system files
     1. Open the command promote with Administrators.
     2. At the command prompt, type the following command, and then press ENTER:
         sfc /scannow
    Any errors are found in the steps above, please let me know.
    Hope this helpful.
    Best Regards,
    Jason Zeng
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Windows 2008 Server upgrade

    Hi,
    I would like to upgrade one of my Servers from Windows 2008 R2 Enterprise to Windows 2012 but I am not sure if I can and if I do what the implications would be.
    The server in question is my Hyper V server host and has several other servers running from it that are stored on an external storage unit.
    Will I be able to upgrade this server?
    If not what are my options as far as reinstalling goes? The virtual servers are mainly production servers so I want to reduce the down time.
    Thanks for your help.
    alamb00

    Hi alamb200,
    You can upgrade your Windows Server 2008 R2 Enterprise with SP1 to Windows Server 2012/2012 R2 Standard or Windows Server 2012/2012 R2 Datacenter with no problem.
    Upgrade Options for Windows Server 2012 R2
    http://technet.microsoft.com/en-us/library/dn303416.aspx
    However, please note that VMs will not work after you upgrade the Hyper-V 2012
    R2 host, you need to take additional steps to move/migrate the VMs.
    How to Migrate/Move Virtual machines from 2008R2 Host to 2012R2 Host ?
    http://curah.microsoft.com/38398/temp
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition.  I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

    I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition.  I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

    No easy fix for a few reasons:
    1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
    2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
    I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
    Win7 x64 booting natively via EFI (no bios emulation)
    Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
    My recomendations:
    1) Install on a second smaller hard-drive; or
    2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
    3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

  • Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3

    Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3

    Hi,
    Upgrade steps
    1. Install 11.2.0.3.0 rdbms software
    11.2.0.3 patch set is a full release.
    Beginning with the release 11.2.0.3 patch set, you have two ways to apply a patch set
    i)Out-of-place upgrade (Recommended) -- 11.2.0.3 will be installed as standalone at another location. So there is no impact on source oracle home and also DB upgrade will take less time
    See Note 1276368.1 : Complete checklist for out-of-place manual upgrade from 11.2.0.1 to 11.2.0.2 , it is applicable for 11.2.0.3 as well
    ii)in-place upgrade - 11.2.0.3 will be installed on top of 11.2 installation, So source oracle home will be replaced, Downtime will be high comparing out of place upgrade
    for more info, Please refer to
    Note 1189783.1 Important Changes to Oracle Database Patch Sets Starting With 11.2.0.2
    11.2.0.3.0 software can be downloaded from My Oracle support: patch 10404530
    https://updates.oracle.com/download/10404530.html
    Please select your platform before downloading (Click on "Platform or Language" drop down menu)
    if the platform name contains (32-bit) then it's 32-bit 11.2.0.3 client version
    To install 11.2.0.3, you must download both p10404530_112020_<platform>_1of7.zip
    and p10404530_112030_<platform>_2of7.zip
    <platform> = your platform( ie for linux x86, download p10404530_112030_LINUX_1of7.zip and
    p10098816_112030_LINUX_2of7.zip )
    Note 1194734.1 : Where do I find that on My Oracle Support (MOS) [Video]
    Note 549617.1 : How To Verify The Integrity Of A Patch/Software Download? [Video]
    Note 169706.1 : Oracle Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2)
    2) Finish the post installation steps as per the patchset README (readme.html).
    3) upgrade the database to 11.2.0.3
    Kindly ensure source database has all Valid DB components(dba_registry) and there are no invalid sys/system objects
    Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
    Note 837570.1 : Complete Checklist for Manual Upgrades to 11gR2 (applicable to 11.2.0.3)
    Note.870814.1 : Complete checklist to upgrade the database to 11gR2 using DBUA (applicable to 11.2.0.3)
    4) After db upgrade, you can apply PSU patch of 11.2.0.3, it will give latest bug fixes of 11.2.0.3
    The latest PSU patch is (Reference: Quick Reference To Patch Numbers For Database PSU, CPU And Bundle Patches (Doc ID 1454618.1))
    14727310 (11.2.0.3.5) Jan 2013 DATABASE 11.2.0.3
    Patch readme file has Installation instructions.
    Oracle Database Upgrade Path Reference List (Doc ID 730365.1)
    Thanks,
    Krishna

  • Error Upgrading ICM from 7.2.4 to 8.5.2 on Windows 2008 R2

    Hi,
    I am trying to upgrade from ICM 7.2.4 to ICM 8.5.2 on Windows 2008 R2 in lab. I am using the following procedure.
    Old system
    Domain controller Windows 2003
    Sprawler Windows 2003 ( Icm 7.2.4)
    New System
    Domain Controller Windows 2008 R2 Standard Edition
    Sprawler Windows 2008 R2 Standard Edition (SQL 2005 with SP4)
    Taking the registry backup of the old system using registry utility.
    Running the EDMT tool on the new 2008 Sprawler machine for technology refresh.
    Running the ICM installer for Technology Refresh and selecting the registry and ICM patch (8.5.2)
    System finishes the setup without any error and after reboot tries to install the patch.
    At this point I get the attached error.
    Has anyone faced such error while upgrading.
    Regards,
    Amir

    Hi Amir,
    As per the attached screenshot, it prompts out that your system has not went through the MR of 8.0. I suspect that you cannot upgrade your version from 7.2.4 directly to 8.5. Instead you would need to upgrade yur current version to 8.0 and from 8.0 you can upgrade to 8.5
    Hope this helps!!!
    Cheers,
    Dass
    Please rate useful posts

  • Upgrade from a two tier EBS 11i 11.5.10.2 on Windows 2003 Apps and Windows 2008 R2 DB  tier to two Tier R12.2.3 both on Windows 2008 R2

    Hi,
    Any ideas about the best practices for the migration/upgrade reflected with the below question?
    I have a source EBS11i 11.5.10.2 running as a two tier configuration ( apps tier on server  ora10 on Windows 2003, DB tier 11.2.0.2 on server ora1 on Windows 8 R2. Can I use the Note 1377213.1 for a migration to a two tier configuration ( apps tier on server T10 running Windows 2008 R2 and EBS 12.2.3 and DB tier running 11.2.0.4 on Windows 2008 R2 )? What alternative approach could you suggest? As far as I know EBS11i is not certified on Windows 2008 R2 and R12.2.0 is not certified on Windows 2003.

    Yes you can by following "Application Tier Upgrades and Migrations" section -- Install 12.2 apps tier on 64-bit Windows and proceed with the upgrade.
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Microsoft Windows x64 (64-bit) (Doc ID 1330706.1)
    Thanks,
    Hussein

  • In place upgrade Windows 2003 to Windows 2008 R2 fails, how to troubleshoot?

    Hello,
    I'm upgrading in place Windows 2003 R2 to Windows 2008 R2 and upgrades rolls back on it's own with no indication for reasoning. 
    Below is setuterr.log which is full of errors but I can not figure out which specific one is curlpit. Any ideas?
    2014-07-21 15:44:29, Error Number of Enumerated Devices = 6[gle=0x00000103]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=00000002x[gle=0x80092004]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=00000002x[gle=0x80092004]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=00000002x[gle=0x80092004]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=00000002x[gle=0x00000003]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=00000002x[gle=0x80092004]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
    2014-07-21 15:44:30, Error Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
    2014-07-21 15:47:51, Error [0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-07-21 15:47:53, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:47:53, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:47:53, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:47:53, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:47:53, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:47:53, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:47:55, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:47:55, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:47:55, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:47:55, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:44, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:44, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:44, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:44, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:44, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:44, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:44, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:44, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:49, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:49, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:49, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:49, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:49, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:49, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:49, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:49, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:49, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:49, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:49, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
    2014-07-21 15:48:49, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-21 15:48:53, Error [0x08071d] MIG Mig::CDownlevelOCStore::AddOCsFromManifests: Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man.: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-07-21 15:48:56, Error [0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-07-21 15:48:56, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:48:56, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:48:56, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:48:56, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:48:56, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:48:56, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:48:56, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:48:56, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:48:56, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:50:14, Error [0x0808fe] MIG Plugin {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}: BthMig: Failed to migrate bthport keys, bailing out
    2014-07-21 15:50:14, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:50:14, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:50:14, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:50:14, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:50:14, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:50:14, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:50:17, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:50:17, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:50:17, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:50:17, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:50:17, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:50:17, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:50:17, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:50:17, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:50:17, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:50:17, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:50:17, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:50:17, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:53:14, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:53:14, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:53:14, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:53:14, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:53:14, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:53:14, Error [0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2014-07-21 15:53:14, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-21 15:57:06, Error [0x0803db] MIG IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\sankap\NTUSER.DAT; giving up (2).[gle=0x00000003]

    Hi,
    Most probably these kind of errors pop up if the drivers are not compatible. Do you find any .dmp files under folder C:\$WINDOWS.~BT\Sources ? If so
    open it with debugger and check for the affected .sys file name.
    Check the DVD media, or try a different media.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/691bb048-f63f-41fd-a152-e502671fb27e/upgrade-to-from-windows-server-2003-r2-x64-to-windows-server-2008-x64-failed-4-times-so-far?forum=winserverMigration
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Mac os x wiki server can't authenticate user password from active directory recently after we upgraded to windows 2008 server.

    after upgraded to windows 2008 server, our  mac os x wiki server can't authenticate user password anymore. How can I re-bind the wiki server to the AD again? thanks in advance.

    Solved it by deleting the user and creating a new one with the same userID.
    Maybe it occured because I marked the "user has to change password after first login" box when resetting the password but didn't yet allow him to do so in the webpages menu?!?

  • After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work.  I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

    After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work.  I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
    Can anyone recommend a solution?

    If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
    My Acrobat version is 11.0.10
    I am running Windows 7 Professional with Service Pack 1
    My Internet Explorer is Version 11.0.9600.17691
    Update Versions 11.0.17 (KB3032359)
    I am running Microsoft Office 2013

Maybe you are looking for

  • Some share buttons don't work on my tablet

    I have a Samsung tablet, model GT-P3113 and its Operating System is Android. In some websites when I click share buttons like addthis and sharethis, they don't work and are inactive. I refresh the page and it doesn't help. For example, none of share

  • Max No. of Records in a Table

    Dear Sir/Madam, I have the Transaction table with 10 Million records. While Tuning the table it takes 5.8 seconds to fetch records from it with Cost based optimization. I have Partitioned my table based on months and necessary index is been created.W

  • Help with z-55

    I cant seem to get my speakers working right! I really have no idea what is causing it. I have plugged in my logitech z-5500 5. speakers into my sound blaster audigy value soundcard correctly (following all diagrams), yet the sound only comes out the

  • Which Mac is better for programming purposes (IOS, Android, etc..), Mac Pro or Air?

    Hi, i would like to buy a new Mac notebook, however i cant decide at all on whether to get Air or Pro. i would like to use the notebook for programming purposes. i would bascially be developing IOS and Android Apps as well as some python and ruby. so

  • Field Symbols - STRING to CHAR

    Hi Friends, I have a STRING data type declared and Iam trying to pass this data to system function 'C_RSTS_WRITE' for some requirement as below. But it gives me SY-SUBRC as 16. But it works for CHAR datatype which I dont want to use as I have some ot