Upgrade from 12.1 to 12.1.3 (forms not starting)

Hi all,
I just upgraded our server from R12.1 to R12.1.3.
I am able to login but forms is not starting. I get this error:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, ohs_admin@localdomain and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.I did not find an error in the adpatch.log.
Which error log do I need to check for this error? And where is it located?
Thanks.

Hi Hussein,
I'm a little confused and don't know what to do.
I have two backups. Before and after installing patch R12.AD.B.DELTA.3 (patch 9239089).
Is this a good starting point:
I installed the patch R12.AD.B.DELTA.3 (patch 9239089) and everything is working fine.
Now in DOC 1080973.1 I see that I am at at step 2 now: "Use AutoPatch to apply Oracle E-Business Suite Release 12.1.3 Patch 9239090 and follow the instructions in the patch readme file."
Should I do that or do I need to run an other patch first?
Thanks in advance.

Similar Messages

After upgrading from 4.6C to ECC 6.0 templates not working in smartform

Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
Abhishek

Hi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran

I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will let me update

I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will not let me update and closes Bridge down.
I have uninstalled and reinstalled 3 times and still no success. Any suggestions?

What system are you on? Did you run the Creative Suite Cleaner Tool inbetween your install attempts? If not, try that to produce a "clean" install with factory defaults. Other than that there could be some specific system issues at play, but again, we'd need to actually know what system you are on...
Mylenium

How do I upgrade from PS cs5 to CS6? I am not interested in the cload.

How do I upgrade from PS cs5 to CS6? I am not interested in the cload. Please tel me the URL.
[email protected]

You can only upgrade online from Adobe.
See http://www.adobe.com/products/creativesuite/upgradeinfo.html

After upgrading from ASA 8.2 to 9.1(2) not able to get web site

Dears,
ASA Version has been upgraded from 8.2 to 9.1(2). Since then, website is not accessible from outside.
Diagnosis:
Many web sites are deployed behind the ASA. When anyone accesses website from outside, the following error is reported: The page cannot be displayed. No issues have been reported with any other websites.
In the ASA, two different public subnets are in use in order to allow accessing the website from the public domain. No issues have been reported so far with the first subnet. The website is mapped to a public address in the second subnet. When the website is mapped to an IP address in the working subnet, the website is accessible from outside. As a workaround, this is applied and the website is up and running.
As the website is working fine with the second subnet, NAT and ACL configuration is fine. We have turned on logging in the ASDM, but no traffic was observed on the ASA for the non-working subnet. On the other hand, the traffic was noticed on the ASDM for the working subnet.
The working subnet is XX.YY.XX.X
Non working subnet is XX.YY.YY.X
The outside interface ip is XX.YY.XX.X (Working Subnet)
Tried to assign one ip address to the PC from non working subnet and connected to the Switch , its pinging from outside

Hi
Have you tried using packet tracer?

I would like to upgrade from 10.6.8 to Yosemite but am not able to install it. What should I do?

I would like to upgrade from OS X 10.6.8 to Yosemite. I went to the Yosemite web page but there was no download button which I could click. What should I do? Thank you.

Try using one of the 2 links in the right sidebar. One under Categories and one under Free.
Try booting into the Safe Mode. If that doesn't work, set up another admin user account and try from there.
Safe Mode - About
Safe Mode

I just purchased the upgrade from trial to full version. It does not work. It asks for my orginal serial key and when I paste in the trial key it says invalid??

Downloaded trial and then purchased the activate the full version option. The activation keys don't work. It wants an 'original' key. When I use the trial key it rejects it as invalid! Have I just been robbed of 75 quid?

lanceblack,
You know, I had seen your similar post in other forum with same issue. This itself is confusing for other participants including myself to keep track of forum discussion regarding same issue.
It would be nice if you keep your issue in proper forum in one place, less confusion for others.
Corky02 said better than I did yesterday. I am not quite sure why or what impresssion that you'd easily upgrade from try-out app into full-license. For many people are aware that what it means or what does this having to do with upgrading qualification with any applications. Why did you think you would get to upgrade that easily from trail try out app to licensed one?
I don't think the Apple's ads are misleading. I just think you got yourself confused. Sorry I can't help you. IF I am Apple employee, I would love to help you and get this resolved for you. I am just one of those participants helping others.
Once again, I am sorry that you get your view all wrong and lead into thinking that you are entitled to do so. But you need to understand that once if you had purchased a full license app from try-out app. Most people know what does that mean with try out app for the first time. And most people know that if they wish to purchase an application, this means purchasing a boxed (or electronic downloaded file) from Apple retail store (or online store). Plus, new venue at Apple offering Mac App store. I think that is a little confusion for some people who are not familiar with the difference.
I do believe that if you purchase from Mac App store, it doesn't require to put in license serial number. I think it is a different approach for some reason. I had bought some other Mac apps (not Aperture) from Mac App store few times. I haven't purchased Aperture updated version straight from Mac App store online. I bought mine from Apple retail store in Canada in person.
I still don't understand why you still think Apple is misleading you all the way. I don't think it is. In case if you haven't notice... there is way for you to get in touch with Apple called Apple Support Express Lane. Give it a try.

Upgraded from Iphone 4 to 5s and text iMessage not working

Hello,
I've just upgraded my phone from a 4 to a 5S. In the store the clerk called my
phone to make sure it was working. Before I got home my wife had sent me several
texts that went to my old phone. After getting home I went through iTunes and restored
my new phone with the contacts/apps etc from my old phone. I've tried logging out
of all iTunes, FaceTime, iMessage etc on old phone but still can't get new phones iMessage
to work. Also reset old phone and removed SIM card. Any suggestions to fix this?
Thanks for your help.

Chris,
Thanks for the speedy response. To answer you questions:
No- iMessage has never worked.
It recognizes my new phone number when I look in the cellular
settings. In the messages settings I can't find my phone #, just turn
iMessage on/off, sign in with Apple ID which I've tried, SMS and a couple
other items that's it. No send and receive options.
iMessage is not activated.
My wife sent the texts to my phone number not my Apple ID.
I'm not getting anymore messages on the old device.
I got one text on the new phone from a buddy with an iPhone but
it was just a SMS text.
I hope this info helps.
My phone works though, I just checked, just iMessage/FaceTime
and texts aren't working. My wife sent me a text that neither phone
has received.
Thanks

Just upgraded from Mountain Lion and now some programmes do not work. How to go back to Mountain Lion

Just upgraded to Yosemite from Moutain Lion. Want to go back as it refuses to run some programmes

Yosemite/ OS X Mavericks: Revert to a previous OS X version

Upgrade from Bootcamp 3.0 to 3.1 does not work - error 2229

Hi,
I´m running Snow Leopard and Win7 on my MBP 2008, each at 250GB HDD space. I installed both together. Before, I had Win Vista and Mac OSX Tiger installed and hardware worked in both OS´s. But I had to exchange my HDD and install everything from scratch. Ever since, I can´t use right click on Trackpad or Bluetooth properly in Win 7. In Snow Leopard, everything works fine.
I found out a couple of different ways trying to fix this, but nothing worked. Now I found the hint to install this here http://trackpad.powerplan7.com/ but this requires the previous installation of Bootcamp 3.1. Problem is that I have Bootcamp 3.0 installed (with bugs, as said before - meaning trackpad etc. is not working properly).
Anything I try fails - I can´t install single drivers from Bootcamp CD (it says it worked, but nothing happens), I can´t upgrade to Bootcamp 3.1 (still the error "2229")...
So I´m lost at the moment and try to always have an external mouse with me, that´s USB connected.
Does anyone here know better ?
Thx,
Simon

I dontknow if this will help you or not, ut back when the BootCamp v3.1 update came out, there were a number of people who could not get it to install. For many of them it was that they had a third-party software installed which added a display-adapter to their system (LogMeIn, etc.) If you have anything like that installed, try un-installing it first, then reboot, and try the bootcamp install. If that works, then you can easily re-install the other software again (although you may need to uninstall it again fr the next bootcamp update).

I upgraded from 10.3 and now "Connect to Server" not working!

yesterday I upgraded my co-worker's computer from 10.3 to 10.4, and for some reason he can connect to the internet but he can't connect to our server. We ususallly go to "Go to Server," type in our server address and then that window will go away and a new window will pop up showing that it is searching for that address. However, when I click on "Connect" the window remains and nothing happens. Thus we cannot connect him to the server, although he is able to connect to the internet with no problem.
Any suggestions?

what about trashing the finder preferences? did you try that first? I was thinking of trying that....

Upgrading from iOS 4 to iOS 6.1.2 not working

I regrettably jailbroke my 4th gen iPod touch back on iOS 4 and tried to upgrade to iOS 6.1.2 today but the iPod is stuck on the screen with the usb cable and the arrow pointing to the itunes icon.

Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

I upgraded from v2 and now newly created folders are not in recent list

I used to be able to create a new folder in v2 and see it immediately in the 'recent' list, but now it does not do that in the latest and greatest version. This is something I use all the time for filing new clients.
Thanks, Adrian

Hi Actually I never have needed support, it works perfectly for me. It's always a shame when an upgrade removes a feature you use all the time; I was genuinely surprised by that.
Anyway, I turned off my upgrade flag so I won't bother you again.
Thanks, Adrian

Trying to upgrade from Elements 10 to 11 on mac will not install.

Elements 10 works fine.
downloaded upgrade for elements 11 both photoshop and premiere. neither one will install.
it startsm and fails and says to run adboe support advisor. I have, it says no errors.
please let me know how to correctly update and install elements 11 over elements 10
thanks

If the Adobe Support Advisor was unable to locate the error then please manually review your installation logs. You can find details on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Upgrade from SQL 2K8 R2 to SQL 2K12 did not upgrade SSRS

I upgraded a SQL 2K8 R2 SP2 SQL Server which also had an instance of SSRS on it. Everything went fine with the database engine upgrade, however SSRS did not get upgraded. Upgrade advisor did not report any issues which would have blocked installation.
If I try to run the upgrade wizard again, it does not show SSRS as something that can be upgraded. Any thoughts or ideas on how I should proceed?

Hi KHLLC,
Are you sure RS did not upgrade? If in Native mode, you can check the versions of the binaries in the program files folder ..\Reporting Services\ReportServer\bin to see if any of the binaries were upgraded to the SP2 versions.
If you are in SharePoint mode, you also need to run the RS SharePoint add-in for SP2. This link might help.
http://technet.microsoft.com/en-us/library/aa905871.aspx
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.

Upgrade from 12.1 to 12.1.3 (forms not starting)

Similar Messages

Maybe you are looking for