Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
Thanks fo rall yor help!

Similar Messages

  • TS3899 When i check my email I get the message "Cannot Get Mail.  The user name or password for "Gmail" is incorrect".  The user name and password are definiately correct, I can log on through safari.  This worked fine this morning!

    My gmail account has stopped working on my iphone, saying the user name or password is incorrect, but both are definitely correct.  I have tried restarting the phone, deleting the account and setting it up again, and checked that I can log on through safari.  It had been working fine until this morning!  Any ideas how to fix this?

    Turn off 2 step authentication on your gmail account in a browser.   It should work fine afterwards.

  • After using a certain payed wifi, now always I open another wifi feature, the old window for the paying wifi ask for the user name ans password. I'd already delete the old wifi conection, clean the cookies, restart laptop, clean the historic, etc etc

    This happens with Firefox, or even IE...

    It shows Peter's doing its jobs properly.
    Anyway there is no more communication from Sony since awihle. If you can have any news.
    Anyway good job Zero!

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Keep showing "the user name or password is incorrect after changing pwd

    after i changed my gmail password, i change it correspondingly on my ipad.
    however it keeps showing "the user name or password is incorrect.
    i even deleted the account and create again but not work.
    it worked perfectly good before i changed my gmail password.
    please help.

    additional information:
    my another gmail account on ipad mail app work fine
    checked google imap setting and caps log.

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
    Do a reset
    restore with back up and if required as new

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • HT4906 I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto?

    I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto? To be honest I'm not even sure what type of Mac I have and don't know how to find out what kind it is
    I'd also like to make address labels and don't know where to find that either

    You would make address lables with the Contacts app.
    If you don't have the user name and password used to set up the machine then you need to purchase the apps for yourself.

  • I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

    Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

    Try this:
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

  • Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Hey there sarunelis,
    It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • How can I hide the user name and password from the url address?

    Good afternoon every body,
    I have a form running with Oracle9i Developer Suite Release 2 and when I run the form on the web it shows the user name and password of my data base. Can anyone of you please help me to hide the user name and password, if there's any way of course?.
    Thanks a lot!!.

    Luis,
    Then, as inolau's notice, create logon screen (or use the default one) and force the users to logon at runtime. Do not pass username/password as parameters.
    inolau,
    True that if the connection is specified in the config it will be the same for everyone. However, every case is different. For example one of our apps gets S3 credentials (from non-Oracle S3) as session parameters. It uses this common db connection to validate some stuff with the database, read security definitions and then it re-connects the forms using the credentials.

Maybe you are looking for

  • Exchanging Values with JFrames

    Hello everyone, I have a problem to face with a swing application containing two JFrames.The problem is how can i pass a value from one Jframe to another without using the new operator. For Example i have a jbutton in the first jframe and a jlabel wh

  • Outline Mysteriously Around Images

    Every image i use in dreamweaver seems to have a silver outline around it. The images in all other programs do not. Can anyone tell me how to undo this? screenshot1 screenshot2 Thanks, -Dan screenshot1 screenshot2

  • Error in HTTP Server , OAS 10g

    Hi all, i'm not sure this is the right forum to post this question... i keep getting this error in HTTP Server of OAS10g middle tier: [Thu Jul 28 15:51:47 2005] [error] [client 10.42.48.237] [ecid: 1050719549026,1] MOD_OC4J_0080: After calling Apache

  • There are gray lines across my mac book, what do I do?

    there are gray vertical lines across my mac book, what do I do?

  • Video playback being affected by events outside of flash

    I have created a video player which functions pretty well. The problem I am encountering is that while a video is playing, if I move the mouse around the rest of the any instance where I hover over a link causes the video playback to be interrupted.