Upgrade only Java stack to Ehp1 (SAPehpi)

Hi Gurus,
We are currently on PI 7.1, and is considering to upgrade to Ehp1 (primarily for IDoc packaging feature)
and since the IDoc packaging feature is delivered thru a Sender IDoc adapter, which means this seats on the Adapter Engine already (Java stack)
I saw the document for SAPehpi (Upgrading to Ehp1 for a PI 7.1 system) and if i understand it correctly there are two options,
one ABAP + JAVA upgrade and the other is JAVA only upgrade.
So does that mean I can upgrade my Adapter Engine (AAE) to Ehp1 using the JAVA only upgrade option?
My apologies in advance as i have no experience yet in upgrading 7.1 systems
Thanks

> So with that, if we stay on 7.1, then we don't have an option for IDoc packaging (IDoc package inbound to PI will be split into individual IDocs, then will have to use an integration process Collect to re-package it as 1) ?
Even when you apply EhP1, you can use IDoc packaging only, if your sender system is also on SAP BASIS 7.1 EhP1 or SAP BASIS 7.0 Ehp1.
So you should confirm this first.

Similar Messages

My Web AS has only Java stack

Hi ,
My MI server has only Java Stack installed. Can I still develop mobile application without an ABAP stack?
If yes, please suggest any helpful link or methods to go by.
Also please give me a link from where I can download MI Client SP13 because i have browsed through the SAP market place but couldn't find it.
Valuable suggestions would be rewarded!!
Padmarajan.

Hi Padma,
If you have WAS, that means you have both the Java stack as well as the ABAP stack. I am not basis person, but I think you need to configure them.
MI Client is not available on any website...you can only get it from servive.sap.com/swdc, your SAP cd or you can download it from the bsp link ( refer
http://help.sap.com/saphelp_nw04/helpdata/en/a7/893a5889e08b41b615688b1a93b559/frameset.htm )
Regards,
Rahul

Uninstalling only Java stack

Hi,
We have ABAP + Java stack on our PRD system. Can we uninstall only Java stack without disturbing the ABAP stack ?
Please suggest the procedure to perform this and also the post steps to be done if any.
Windows 2003 IA64+ ECC6.0 + Oracle 10.2

Hi
In principle, waht the UNINSTALL does is:
1. delete the relevant data from DB
2. delete the relevant files/folders from File System.
So if you do want to remove the Java add-in instance, you can do this manually even it is NOT recommended, main steps:
1. delete the Java DB schema, should be SAPDB<SID>
2. adjust the profiles to remove all the java stack relevant settings.
3. remove the j2ee and SDM folder from file system.
Probaly you want to uninstall the Java stack as you don't need and, by uninstallig it, the abap performance might be better,
but to achieve this, you just need to set the rdisp/j2ee_start to 0, or just comment out all the parameters used by the java stack
in the instance profile, and this applies to all the platform, not matter Windows or Unix.
Here is an example of the profile parameters in <SID>_DVEBMGSXX_<hostname>
exe/j2ee = $(DIR_INSTANCE)/j2ee/os_libs/jcontrol
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50000
jstartup/trimming_properties = off
jstartup/protocol = on
exe/jlaunch = $(DIR_INSTANCE)/j2ee/os_libs/jlaunch
jstartup/vm/home = /usr/java14_64
INSTANCE_PROPERTIES = $(DIR_INSTANCE)/j2ee/cluster/instance.properties
SDM_PROPERTIES = $(DIR_INSTANCE)/SDM/program/config/sdm_jstartup.properties
jstartup/instance_properties = $(INSTANCE_PROPERTIES);$(SDM_PROPERTIES)
ms/server_port_0 = PROT=HTTP, PORT=8100
Regards,
Thunder

Couldnt upgrade the java stack after upgrading the abap to ehp1

Hi
I have upgarded the system to ehp1 but i couldnt continue to upgarde the java stack to 18th patch.The reason is it coudlnt find the file JSPM02P-2-20002796.SCA. I couldnt find this file . i couldnt find only this file JSPM02P_4-20002796.SCA . I tried to put this file in inbox and tried to run the jspm but it is not recognizing this as a valid file and its expecting JSPM02P-2-20002796.SCA. I couldnt find this file can anyone suggest me where i could find this file.
Thanks and Regards
MA.Sreenivasan

When you download the files, be sure to select "Save As File", which next to the "Add to Download Basket" button. Copy that SPStab.xml file to your EPS/in directory. Without that, it won't recognize the files even if they are there.

EHP Upgrade Issue - Java Stack

Hi,
Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
Error log:
Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
I went through the following link , proceeded with option 2, But still getting same error.
Portal Upgrade Issue
Please advise the resolution for the issue I have.
Thanks in advance
Regards
Srinivas
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

Issue resolved

EHP4 Upgrade ABAP+JAVA stack

Hi SDN Team,
We are in the proceess of EHP4 upgrade,now we are at the road map configuration where we got stuck,I is looking for JAVA sca files in XML file but could not found the same and it throw an error,
Trouble Ticket Log
===============
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: SE1
Hostname...........: NA00SAPSAND02
Install directory..: g:/usr/sap/SE1
Upgrade directory..: G:\EHPI\EHPI\java
Database...........: Microsoft SQL Server
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
More information can be found in the log file G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
We have added the system in SMSY and download the stack properly and I could see SCA files listed in XML file but still iam stuck the above error
PREPARE_JSPM_QUEUE_CSZ_02
===========================
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jul 27, 2010 3:48:22 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jul 27, 2010 3:48:22 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml.
Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jul 27, 2010 3:48:22 AM [Warning]:    com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Warning]:    com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
Jul 27, 2010 3:48:22 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.141.
Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
Not sure what to do now.please advise.
Regards
Uday

Hi Uday,
> Jul 27, 2010 3:48:22 AM [Warning]:    >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Warning]:    >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Info]:                      >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of >stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
> Jul 27, 2010 3:48:22 AM [Error]:                       >com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception >has occurred during the execution of the phase.
> Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) >[Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no >components for this system.
I can see in the log that stack xml you are using is not for the system to whom you are upgrading. That is the reason system is rejecting stack file. Please check above extract of logs.
I would suggest you to please generate stack xml file for this system from MOPZ after correctly configuring SMSY and use it. Then your problem will be resolved.
Thanks
Sunny

BRF+ Upgrade from JAVA stack to ABAP stack. Tutorials Required.(Beginer)

Dear All,
We are Proceeding with and Upgrade on our JAVA based Stack to ABAP Stack of EHP6.
The new System extensivly uses BRF+ Techonolgy and SAP Workflows.
Could you please Provide certain Basic links to Start of with it? As of now its totally new CONCEPT to start with in coming time for us.
We have skill set avilable in ABAP developemnt,PI,Worklfows and other ABAP object but not so far in BRF+ concept.
If any Tutorails are avaialble then please share across.
PS: I have not been able to Procure " SAP Press Book Availability (BRFplus - Business Rule Management for ABAP Applications)"
Thanks a lot.
Regards
Vishal

Read the papers etc on the Business Rule Framework plus.
Especially take a look at the online training. But be careful with papers for NW 701. This is an old version and you may find stuff in there that is not relevant for you as you are on a much higher release.
There is also a paper that explains how BRFplus can be used in combination with SAP Business Workflow.
Why can't you get the BRFplus book? On the SAP Press page there is also an online version´

Unable to upgrade PI JAVA stack from 7.10.4.0 to 7.11.6.0

Using JSPM and choose the Business package option, getting this error. How do I find out which are the pre-reqs for LM-SLD?
There is plenty of disk space.
Details message(s): Archive /usr/sap/trans/EPS/in/LMSLD06_0-20002693.SCA for component sap.com/LM-SLD was admitted for deployment Deployment of archive /usr/sap/trans/EPS/in/LMSLD06_0-20002693.SCA --> sap.comtcdescsclm-sld.sda for component sap.com/tcdescsc~lm-sld is rejected because it depends on missing components Detailed message: 1. The specified software type 'CONTENT/SL-SDA' is not supported.
See Deploy Controller log /usr/sap/PID/DVEBMGS00/j2ee/JSPM/log/log_2011_02_07_17_20_27/deploy_2011-02-07_17-23-53.log for details.
The deloy log:
Feb 7, 2011 5:23:55 PM   [Path ]:component version handling rule is UpdateLowerVersionsOnly.[ deployerId=1 ]
Feb 7, 2011 5:23:55 PM   [Path ]:deployment workflow strategy is normal deploy strategy.[ deployerId=1 ]
Feb 7, 2011 5:23:55 PM   [Path ]:life cycle deploy strategy is disable LCM deploy strategy.[ deployerId=1 ]
Feb 7, 2011 5:23:55 PM   [Path ]:Error strategies[ deployerId=1 ]:
Feb 7, 2011 5:23:55 PM   [Path ]:error action 'DeploymentAction' is 'OnErrorStop'
Feb 7, 2011 5:23:55 PM   [Path ]:error action 'PrerequisitesCheckAction' is 'On ErrorSkipDepending'
Feb 7, 2011 5:23:55 PM   [Debug ]:deployer initialized successfully:[id:#4, elapsed: 188 ms.].[ deployerId=1 ]
Feb 7, 2011 5:23:55 PM   [Debug ]:Total time:[#4: 0.189 sec].[ deployerId=1 ]
Feb 7, 2011 5:23:55 PM   [Info ]:Start validating.[ deployerId=1 ]
Feb 7, 2011 5:25:56 PM   [Path ]:Validating completed. Preparing the validation result.
24.10:name 'tcdescsc~lm-sld', vendor 'sap.com', location 'SAP AG', version '7.1106.20101110134329.0000', software type ('CONTENT', sub type 'SL-SDA'), dependencies :[none]
                                Deploy status is 'PrerequisiteViolated'
                                Description:'1. The specified software type 'CONTENT/SL-SDA' is not supported.'.
All other LM components are status ok in the EPS/in folder:
-rw-rr   1 tstkh    nobody       276 Jan 26 18:08 LMCFG06_0-20002729
-rw-rr   1 root     root     6939470 Feb 3 16:09 LMCFG06_0-20002729.SCA
-rw-rr   1 tstkh    nobody       283 Jan 26 18:08 LMCORE06_0-20002600
-rw-rr   1 tstkh    nobody   25634418 Jan 26 18:08 LMCORE06_0-20002600.SCA
-rw-rr   1 tstkh    nobody       290 Jan 26 18:08 LMCTC06_0-20002694
-rw-rr   1 root     root     4054479 Feb 3 16:09 LMCTC06_0-20002694.SCA
-rw-rr   1 tstkh    nobody       196 Jan 26 18:08 LMHOSTAGENT06_0-20002732
-rw-rr   1 tstkh    nobody      1281 Jan 26 18:08 LMHOSTAGENT06_0-20002732.SCA
-rw-rr   1 tstkh    nobody       288 Jan 26 18:08 LMINTERNALAGENT06_0-20002690
-rw-rr   1 tstkh    nobody    368324 Jan 26 18:08 LMINTERNALAGENT06_0-20002690.SCA
-rw-rr   1 tstkh    nobody       287 Jan 26 18:08 LMNWABASICAPPS06_0-20002687
-rw-rr   1 tstkh    nobody   23608584 Jan 26 18:09 LMNWABASICAPPS06_0-20002687.SCA
-rw-rr   1 tstkh    nobody       281 Jan 26 18:09 LMNWABASICCOMP06_0-20002688
-rw-rr   1 tstkh    nobody   2358391 Jan 26 18:09 LMNWABASICCOMP06_0-20002688.SCA
-rw-rr   1 tstkh    nobody       290 Jan 26 18:09 LMNWABASICMBEAN06_0-20002733
-rw-rr   1 tstkh    nobody   2090683 Jan 26 18:09 LMNWABASICMBEAN06_0-20002733.SCA
-rw-rr   1 tstkh    nobody       267 Jan 26 18:09 LMNWACDP06_0-20002691
-rw-rr   1 tstkh    nobody   2201617 Jan 26 18:09 LMNWACDP06_0-20002691.SCA
-rw-rr   1 tstkh    nobody       273 Jan 26 18:09 LMNWATOOLS06_0-20003137
-rw-rr   1 tstkh    nobody   1002819 Jan 26 18:09 LMNWATOOLS06_0-20003137.SCA
-rw-rr   1 tstkh    nobody       289 Jan 26 18:09 LMNWAUIFRMRK06_0-20002689
-rw-rr   1 tstkh    nobody   3265868 Jan 26 18:09 LMNWAUIFRMRK06_0-20002689.SCA
-rw-rr   1 tstkh    nobody       192 Jan 26 18:09 LMPLUGINS06_0-20002734
-rw-rr   1 tstkh    nobody   1743049 Jan 26 18:09 LMPLUGINS06_0-20002734.SCA
-rw-rr   1 tstkh    nobody       254 Jan 26 18:09 LMSLD06_0-20002693
-rw-rr   1 tstkh    nobody   9095831 Jan 26 18:09 LMSLD06_0-20002693.SCA
-rw-rr   1 tstkh    nobody       199 Jan 26 18:09 LMTOOLS06_0-20002705
-rw-rr   1 tstkh    nobody   19399248 Jan 26 18:09 LMTOOLS06_0-20002705.SCA

I resolved it by skipped the deployment of component LM-SLD Continued with deployment of others including JSPM. Went back and restarted JSPM and LM-SLD deployed with no error.

How to enable ping service on java-stack only system

I have installed SAP NetWeaver 7.0 - Java Trial on local host.
How can you activate the ping service there?
It should work under "http://localhost:50000/sap/bc/ping"
(I know how to activate it with transaction SICF in an abap system, but I have java-stack only here, so I can't call transactions. I can only use the Visual Admin, right?, but there I could not detect a ping service so far)
More detailed:
I created system "SAP_WebDynpro_XSS". (this is necessary for connecting to ECC abap backend for ESS Packages) and set following parameter:
template:"SAP system using connection string"
     category: Web Application Server
          Web AS host name: chrisSAP:50000
          Web AS path: /webdynpro/dispatcher/
          Web AS protocol: http
But when I test the "SAP Web AS Connection" for this system, I got following error:
7. The Web AS ping service http://chrisSAP:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
8. An HTTP/S connection to http://chrisSAP:50000/webdynpro/dispatcher/ was not
obtained successfully; this might be due to a closed port on the Firewall.
I guess step 8 did not pass because step 7 failed, and not because of a closed port or firewall (I made sure everything is open.)
The strange thing is that the connection test fails, but the connection seems to work fine!
I mean I can see the front ESS page in the portal when logging in with an ESS-user, and there are no errors in the log. If I change the SAP_WebDynpro_XSS parameters to some other made-up values, then the front ESS page does not come up and some errors appear with "SAP_WebDynpro_XSS" inside.
That proofs that the connection is working despite the failed connection test, right?. But what can I do that the connection test passes? It seems that somehow SAP has hardcoded the path "/sap/bc/ping" which usually exists on an abap system. But I have java-stack only, so how can I tell that the function that runs the test?
A system connection test fails, but the connection is working fine!
If someone could explain that to me...

Dear Srini Nookala,
thank you for your answer. Unfortunately I don't understand the relation of my question to your answer.
>> check with OSS note 1019335 SAP NetWeaver AS Java 6.40 SP21
I have Version 7.0 SP14. I read the OSS note, but there are around 100 changes listed. I read them all, but couldn't figure out one that has to do with ping and system test. So which sentence inside the note are you referring to?
>> The problem is due to JCo parameters configuration not properly, Ask Basis team, they will do it.
I am basis team. I configured the JCo properly as described in manual and tested them afterwards. They run successful. Also all the links that you gave refer to JCO connections about how to set them up and test them. But what have JCO connections to do with System-connection tests? As far as I know JCO-connections are not used for system connectivity tests. You can set them up independent. I understand that JCO-connections are used for getting data from backend servers. But the system "SAP_WebDynpro_XSS" is defined for determing the webdynpros on localhost (frontend, not backend).
So please can you explain me what JCO-connections which refer to remote hosts have to do with a ping service on local host that cannot be reached? And which part would be not configured "properly"? Timeouts? user?
To define my question more properly:
Is it possible to make the connection test work on a java-stack only host for a system that refers to itself (localhost)? Or is it a known bug?
Some sub-questions
Am I using the right system template (I am using "SAP system using dedicated application server")
I have no abap on local host (chrisSAP). Only java stack. Usually path ..sap/bc/ping refers to an abap system, right? So in my opinion I have 3 possibilities:
- install abap-stack on local host (portal) and activate ping service.
- somehow install a ping service that runs under the given URL in Visual Admin (how?)
- somehow tell the connection test to skip pinging and continue test. (How?)
Any additional advice would be highly appreciated.

Upgrade from SCM 5.0 to SCM 7.0 without Java Stack

Hello,
My query is we have a SCM 5.0 system which has a java stack in it. But now we are going to upgrade it to SCM 7.0. - Is SCM 7.0 has a java stack ?
If it doesn't have , can we upgrade SCM 5.0 to SCM 7.0 without Java Stack ? Is it posssible to upgrade without Java Stack or not ?
Is it possible that we can convert Java Stuff into ABAP web dyn pro ? If yes , how shall we can achieve it ? If not, how shall we proceed in an alternate way ?
Thanks for your help in advance.
Madhu

Hi Manoj,
Yes the system is running okay and I can login without problem. The question I have is that the upgrade program started with default system number 00 loaded, where I don't know how to change it to match our system setting. Our system is currently having system number 01.
Thanks,
Eric

Error during Java Stack upgrade with SAPINST Tool for Netweaver 04

Hi,
I have updated all the ABAP stack support packages fine. But when i try to upgrade the Java Stack for the BW server using the SAPINST tool, i received an error in the 17th step "Starting J2EE Engine".
The error log says:
CJS-20057 Starting Java engine DVEBMGS05 of SAP system <SID> failed:
after 165 seconds the state of the engine changed from "Starting" to "Stopped".
Please help.
Thanks
Vijay

Hi Vijay,
Please check the link for some initial troubleshooting:
http://help.sap.com/saphelp_nw70/helpdata/en/69/430841a6e1ef6fe10000000a1550b0/frameset.htm
Regards,
Siddhesh

ABAP+Java Kernel and only Java Kernel

Hi Friends,
Is there any difference in ABAP+Java Kernel and only Java Kernel?
Can we use the kernel for above both from the same location as below?
1#
Support Packages and Patches> Additional Components> SAP Kernel> SAP KERNEL 64-BIT UNICODE> SAP KERNEL 6.40 64-BIT UNICODE
Following Files
DB Dependent - ORACLE
          SAPEXEDB_175-20000227.SAR
          DBATL640O92_44-20000227.SAR
Database Independent
          SAPEXE_175-20000226.SAR
Assuming above SAR files contain R3trans, R3load, tp ,... also.
2#
As per my knowledge SAP has given one more path to download J2EE SP's which contains Kernel and J2EE Support Packages.
http://service.sap.com/patches --> Support Package and Patches -> Entry by Application Group -> SAP NetWeaver -> SAP NetWeaver -> SAP NetWeaver 04 -> Entry by Component -> Application Server Java -> SAP J2EE Engine 6.40 -> J2EERT19_0-10001982.SAR/J2EERT20_0-10001982.SAR (OS Independent) and CTRLDB219_0-20000114.SAR(OS Dendependent)
What is the difference between above two kernels?
1# contains R3trans, R3load, tp ...etc which is exclusively used by ABAP Stack related functions. The startsap script used here would check R3trans -d authentication successful before starting database and then only it starts the database from sidadm. I observed OPS$ users available in only ABAP schema SAPSID but not available in SAPSIDDB. If I use the kernel downloaded from 1# for Java Stack only system, startsap would fail as R3trans authentication fail as there is no ABAP schema in Java systems.
This applies well for ABAP+JAVA or only ABAP based systems.
If I use only JAVA Stack based system can I use the kernel downloaded from 1# . What is the kernel and SP available in 2#? Is this also contains the same kernel given in 1# or it is different. I also observed in JAVA they are not calling Kernels by Patch No like 154, 175... they call it by SP19. Please correct me if I am wrong.
Did anyone come accross this type if issue? I would appreciate if anyone can clarify my questions given above.
My main target is to have clear strategy for ABAP+JAVA, ABAP, JAVA kernels to avoid mess up. Which one to download? What is best practice? Differences?
Thanks and Regards
Prasad

Hi Sacha,
Thank a lot for your answer I am clear now. Before rewarding points to you.
I have final question.
You mean that there is not seperate kernel for Java Stack Systems.. When we apply SP11 or SP19 by default it applies Kernel and also support packages w.r.t the SP. Do we have option to seperate Kernel and Support package while applying SP's for Java System?
If we take for example SAP NW 2004 (WAS 640) latest kernel is 175 (I mean ABAP+JAVA). If I want to know the latest kernel for Java Stack system, Do I need to say it is at level SP19 or check the sapwebdisp -V (Resepctive patch level)?
For ABAP system we check disp+work -V to get the source kernel version. How to justify the source kernel version for Java System?
As per SAP Note: 710914 - Upgrading the J2EE Engine Startup Framework after applying SP for Java System, Do we need to upgrade J2EE Startup Framework?
Thanks and Regards,
Prasad

Activating ADS in ERP for only ABAP stack is possible???/

Hi frnds,
Our ERP system is standalone ABAP stack only.
is it possible to use ADS in only ABAP Stack????
Regards,
Balu

ADS is a service that runs on top of the JAVA stack. The ABAP stack communicate with it on a low level via messaging (SOAP). Therefore, ADS requires a JAVA stack.
However, this is NOT a bad thing. Typically, because:
(1) ADS requires high system and OS resources, you will run it standalone
(2) Running on a separate server (or distributed server) allows you to upgrade ADS/Java stack independently of your other servers if need be
(3) allows for high volume and batch printing/access
Sooooo...you can install a NW AS Java stack by itself and run ADS from there. Once registered in your SLD, your ABAP server can "find" ADS.

Java Stack Vs Dual Stack in Pi 7.3

Hi experts.
I open this thread because I'd like to know your opinion about the newJava installation option in SAP PI 7.3. In previous realeses (7.0,7.1) I felt more comfortable and safe in abap stack and I'm a little afraid about working only with java stack.
I'd like to know advantages and disadvantages to choose java stack instead of dual stack, why you'd choose one of two options or both in your nexts customers.
Thank u so much and happy new year!!!!

Java Stack or Dual Stack in 7.3
Java Stack alone: Almost all standard adapters including HTTP, IDOC and Proxy are all available in this stack. you need to use Integrated Configuration object for this. You are basically going to use Advance Adapter engine alone for the entire processing.
Pros:
No persistance steps here. So you would improve performance many folds for sure.
Throughput is also improved very much.
since 7.3, Solution Manager is available for monitoring inaddition to RWB and NWA. So monitoring would not be issue.
If you are looking for real performance improvement, Single stack Java to go.
Cons:
Abap mapping is not supported.
Message split to multiple receivers are not completely supported.
BPM interfaces are not seamless migration here. SAP 7.1 and lower versions support BPEL wheras 7.3 supports BPMN standards. So you might have to tweak a bit to modify existing interfaces here
Dual Stack:
Your option is pretty open. If you need some specific interfaces to handle only java stack, still that is possible and increase the performance. Also if you have lot of existing interfaces that requires BPM interfaces, ABAP mapping , Multiple split /branching etc.
still dual stack is the better option now. Here developer decides according to the requirement.
Still safe mode is going for Dual Stack for now and change in the future to single java stack alone.

How to install java stack pathes

hi friends
i have installed EP and DI in a box and sp level is sp09. now i want to apply upto sp13. i got sp 11 java stack with the softwaer its in dvd and its having lable.asc file . i would like to know how apply it .
my question is
1 . how to install the java stack sp 11 dvd which contains (lable .asc).
2 . do i need to fallow the sequence to apply the stacks. like (sp 10,11.12,13) only java stack
3. what is the processor to apply stacks .
4 . can i install the stacks when the system is down.
its urgent
regards
raja

Hi,
You can apply stacks when server is running. Make sure server is up and running. You can then start installing the stack 13 directly. (No need for 10, 11,12 etc).
Regards,
Harini S

Upgrade only Java stack to Ehp1 (SAPehpi)

Similar Messages

Maybe you are looking for