Upgrade-phase "SYIDUP_EXTRACT/PROFREAD" error

We are upgrading SCC system.
While generating stack.xml file from solman 7.1 sp 10, we got error in the verification execution as Cannot recognize installed product instance in lmdb.
We referred the note - 1816146 - Correction of installed software information (CISI.
1. We run the report RLMDB_DOWNLOAD_INST_SOFT_INFO and created .xml file.
2. downloaded SUM sp10
While running SUM tools we got the error the phase "SYIDUP_EXTRACT/PROFREAD" as below.
Attaching files as -
1. All log file from directory 'S:\usr\sap\SCC\SUM\abap\log'
2. All profiles
We analyzed the issue. Error is coming the file PROFREAD.LOG as
1 ETQ201 Entering upgrade-phase "SYIDUP_EXTRACT/PROFREAD" ("20140409192228")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '', GwService = 'sapgw' Client = '000'
4 ETQ399 Environment variables:
4 ETQ399 auth_shadow_upgrade=<null>
1 ETQ200 Executing actual phase 'SYIDUP_EXTRACT/PROFREAD'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DDICPWD_ONLY'
4 ETQ399 Starting dialog 'Passwords' at 20140409192229.
1 ETQ359 RFC Login to: System="SCC", AsHost="dl5802" Nr="", GwHost="dl5802", GwService="sapgw"
2EETQ231 RFC Login failed
4EETQ399 Dialogue validator 'DDICValidator' failed with 'DDIC password does not work:
RFC login to system SCC ashost dl5802 nr gwhost dl5802 gwservice sapgw failed with code 1 key RFC_COMMUNICATION_FAILURE:
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR      partner 'dl5802:3300' not reached
TIME        Wed Apr 09 19:22:37 2014
RELEASE    721
COMPONENT NI (network interface)
VERSION    40
RC          -10
MODULE      nixxi.cpp
LINE        3285
DETAIL      NiPConnect2: 172.17.206.26:3300
SYSTEM CALL connect
ERRNO      10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER    1
4 ETQ399 Repeat dialog since input validation failed.
Please check the same and revert backup.
Thanks,
Kundan Gandhi
9930446697

Hi all,
Please check 4 ETQ399 System-nr = '', GwService = 'sapgw' Client = '000' in the log mentioned.
Why it is not picking up any value for System-nr = (It should get system no. 40 - as my system no is 40)
Please revert, if any body faced this type of issue.
Thanks,
Kundan Gandhi

Similar Messages

Error in start of phase PREP_INPUT/PROFREAD

Hi Team,
We are facing the follwing error while 'RESET PREPARE' and it is not accepting the DDIC and SAPServiceER4 password also...
>> 2009/09/29 18:31:04 START OF PHASE PREP_INPUT/PROFREAD
>>>> Passwords <<<<
Enter the password for SAP user DDIC in client 000:
DDIC PASSWORD [***********]: ***********
Enter the password for the operating system account .\SAPServiceER4:
OS PASSWORD [***********]: ***********
ERROR: DDIC password does not work: RFC call to failed with key RFC_E
NICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM DEST=ER4, GWHOST=hydhtc100381d, GWSERV=sapgw00, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner 'hydhtc100381d:3300' not reached
TIME        Tue Sep 29 18:31:38 200
RELEASE     710
COMPONENT   NI (network interface)
VERSION     39
RC          -10
MODULE      nixxi.cpp
LINE        3143
DETAIL      NiPConnect2: 10.136.175.23:3300
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed o.
Please suggest the solution...
Also please let me know that for upgrading ECC 6.0 can we use EHP Installer version more than 7.0 ?
Waiting for your response...
Vibhor

Hi Vibhor,
In resetting of upgrade you don't need DDIC user and sapservice<sid> password.
You can reset upgrade by using below command:
Change to the EHPI/abap/bin directory (Windows: EHPI\abap\bin)
Enter the following command:
./SAPehpi reset prepare (Windows: .\SAPehpi.exe reset prepare)
Delete the EHPI directory.
Start SAPehpi again.
Also, In order to upgrade ERP to EHP4 you cannot use EHPI of version higher than 7.0.
Thanks
Sunny

Error during the upgrade phase "start_shdi_first"

Hello,
We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
Here the error message goes....
starting system failed rc=0
to analyse the error during start of shadow instance
view files 'Startsfi.log' and 'devtrace.log'
in directory usr\..put
repeat phase until shadow instance is started
and u can logon instance no '01'"
We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
Appreciate your response
Startsfi.log
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399   dbs_mss_schema=de4
4 ETQ399   auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_mss_schema=de4
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399   default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2 ETQ353 Starting system
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
DEVTRACE:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        DE4
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    111
intno      20050900
make:      multithreaded, ASCII, optimized
pid        2272
Mon Feb 18 16:08:40 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 111 successfully loaded
     shared lib "dw_xtc.dll" version 111 successfully loaded
     shared lib "dw_stl.dll" version 111 successfully loaded
     shared lib "dw_gui.dll" version 111 successfully loaded
     shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Feb 18 16:08:52 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
Mon Feb 18 16:09:10 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MTW02SDEC01_DE4_01                      <
DpShMCreate: sizeof(wp_adm)          19976     (908)
DpShMCreate: sizeof(tm_adm)          3605136     (17936)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 065C0040, size: 4241064)
DpShMCreate: allocated sys_adm at 065C0040
DpShMCreate: allocated wp_adm at 065C1B30
DpShMCreate: allocated tm_adm_list at 065C6938
DpShMCreate: allocated tm_adm at 065C6968
DpShMCreate: allocated wp_ca_adm at 06936BF8
DpShMCreate: allocated appc_ca_adm at 0693B248
DpShMCreate: allocated comm_adm at 0693C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 069BD868
DpShMCreate: allocated gw_adm at 069BD8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069BD8D8
DpShMCreate: allocated wall_adm at 069BD8E0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2046 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12437]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Feb 18 16:09:13 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4724] Mon Feb 18 16:08:40 2008
[Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    110
intno      20050900
make:      multithreaded, ASCII, optimized
pid        5420
[Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c   1824]
[Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 4724] MsGetOwnIpAddr: my host addresses are :
[Thr 4724]   1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
[Thr 4724]   2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
[Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
[Thr 4724] HTTP logging is switch off
[Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
[Thr 4724] ms/icf_info_server : deleted
[Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
[Thr 4724] CUSTOMER KEY: >J1537289841<
trc file: "dev_rd", trc level: 1, release: "700"
Mon Feb 18 16:09:10 2008
***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c     1694]
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    110
intno      20050900
make:      multithreaded, ASCII, optimized
pid        2344
gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm)          19976     (908)
DpShMCreate: sizeof(tm_adm)          3605136     (17936)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06110040, size: 4241064)
DpShMCreate: allocated sys_adm at 06110040
DpShMCreate: allocated wp_adm at 06111B30
DpShMCreate: allocated tm_adm_list at 06116938
DpShMCreate: allocated tm_adm at 06116968
DpShMCreate: allocated appc_ca_adm at 0648B248
DpShMCreate: allocated comm_adm at 0648C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0650D868
DpShMCreate: allocated gw_adm at 0650D8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0650D8D8
MtxInit: -2 0 0
Mon Feb 18 16:09:14 2008
GwDpInit: attached to gw_adm at 0650D8A8
Thanks,
Vadi

Dear All,
The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
"basis05" during upgrade.we changed it back to welcome and it started working fine.
Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
Thanks for all your replies.

Error in ecc upgrade phase

Hi,
while upgrading ECC 4.7 to ECC 6.0, I am not able to start shadow instance. Following error is giving .
Aditionally I can able to open the shadow instance from GUI lavel. But unable to login through DDIC password. The ddic password has been locked. Can anyone advice me how to unlock the ddic password in the upgrade phase.
Starting shadow system ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
      SAPup error message
SAPup> ERROR: Starting system failed, rc=0
              To analyse the errors during start of shadow instance,
              view files 'STARTSFI.LOG' and 'DEVTRACE.LOG'
              in directory '/dsttemp/put/log'
              Repeat phase until shadow instance is started
              and you can log on instance number '21'.
            - "continue"
            - "cancel"
Enter one of these options [continue] :=
===============================================
===============================================
ERROR in PHASE STARTSAP_IMP
================================
=================================
SAPup> CHECKS AFTER UPGRADE PHASE STARTSAP_IMP WERE NEGATIVE !!!
       It is recommended that you repeat phase STARTSAP_IMP
       You can exit and restart the phase after the errors
       have been corrected. Alternatively, if you know that
       the error is not of concern, you may ignore it
       and continue with phase REPACHK2
              You are urged to repeat phase STARTSAP_IMP !
            - "repeat"
            - "init"
            - "exit"
            - "ignore"
Enter one of these options [repeat] := init
14:50:31 UPGRADE/EUIM: END OF PHASE   STARTSAP_IMP
14:50:31 UPGRADE/EUIM: START OF PHASE STARTSAP_IMP
Starting system ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
      SAPup error message
SAPup> SYSTEM START failed, code -2
                    -2: the test rfc did not work.
                    Try to log on to the system with user DDIC.
            - "continue"
            - "cancel"
Enter one of these options or "help" [continue] :=
Enter one of these options or "help" [continue] :=
      SAPup message
SAPup> CHECKS AFTER UPGRADE PHASE STARTSAP_IMP WERE NEGATIVE !!!
       It is recommended that you repeat phase STARTSAP_IMP
       You can exit and restart the phase after the errors
       have been corrected. Alternatively, if you know that
       the error is not of concern, you may ignore it
       and continue with phase REPACHK2
              You are urged to repeat phase STARTSAP_IMP !
            - "repeat"
            - "init"
            - "exit"
            - "ignore"
Enter one of these options [repeat] :=
Appreciate for an immediate response ...
Thanks in advance

while upgrading ECC 4.7 to ECC 6.0, I am not able to start shadow instance. Following error is giving .
Aditionally I can able to open the shadow instance from GUI lavel. But unable to login through DDIC password. The ddic password has been locked. Can anyone advice me how to unlock the ddic password in the upgrade phase.
This doesn´t make sense. If you can´t start the shadow instance then you can´t logon to the system
Try the following:
cd <put-directory>/bin
./SAPup stopshd
set the parameter
login/no_automatic_user_sapstar = 0
in the instance profile of the shadown instance
then start the shadow instance
cd <put-directory>/bin
./SAPup startshd
Unlock the shadow instance using
./SAPup unlockshd
Try to logon with user SAP* and unlock DDIC.
Markus

Error during upgrade phase JOB_RSUPGCUA_SHD

Hi Everyone,
We are in the process of completing a combined ERP 6.0 Upgrade / Unicode Conversion. Our starting release is ECC 5.0 (ABAP only) and we are running Oracle 10.2.0.2 on AIX 5.3.
We are receiving the following error in phase JOB_RSUPGCUA_SHD:
1 ETQ201XEntering upgrade-phase "JOB_RSUPGCUA_SHD" ("20080812163717")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '56', GwService = 'sapgw56'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=1
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ010 Date & Time: 20080812163717
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ230 Starting RFC Login to: System = "ENP", GwHost = "aix12j1", GwService = "sapgw56"
4 ETQ359 RFC Login to: System="ENP", Nr="56", GwHost="aix12j1", GwService="sapgw56"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "10")
2EETQ261 Start of batchjob "RSUPGCUAGEN111" failed
1EETQ203 Upgrade phase "JOB_RSUPGCUA_SHD" aborted with errors ("20080812163717")
We originally had some issues with the shadow system not starting in phase START_SHDI_FIRST. The source of the problem was the value of paramter ipc/shm_psize_40 in the instance profile of the shadow system. When we ran "sappfpar check" on the profile, the output indicated that the paramter was too small. We backed up the profile, increased the parameter to the value "sappfpar check" recommended and then stopped the shadow system via "SAPup stopshd." We then repeated the phase. The shadow instance was started successfully and the upgrade proceeded with subsequent phases.
We encountered the error above several phases later. The shadow instance is started and I am able to login with user DDIC. As detailed in the error message above, function module SUBST_START_BATCHJOB is aborting with error code 10. Based on what I can interpret from source code of the function module, this seems to indicate that there is a problem with the program values. The SM21 log indicates that "Program name RSUPGCUAGEN111 is invalid."
What do we need to do to get past this error?
Thanks in advance for any assistance,
Tommye

for our case it was that the shadow instance was not completely stsarted, some processes were down, cause the ipc pool 40 was too small, i found the error in the killed work processes.
Probleme resolved as susch. i hope it will help someone.
Regards

Upgrade-phase "CONFLICT_CHECK" fails with error

Please help, I am trying to run the prepare for our BW 3.5 to BI 7.0 (SR2) upgrade and am running into an error in the CONFLICT_CHECK phase:
Conflict check failed, rc = "-2", reason = "Internal error: OCS_COLLECT_ADDON_TASKS: MISSING_CMD_IMPORT SAPK
INBC9D"
When i ran this in our beta and dev environment I wasn't updating as many support packs and plug in's; and I did not run into this error. Here are the addon's I am updating
Addon       current version           upgraded version       how I am updating
PI_BASIS     2005_1_640     2006_1_700     UPG With ADDON CD
BI_CONT     353                     703                     UPG WITH SAINT PACK
ST-A/PI     01F_BCO640     -                     DELETE
ST-PI     2005_1_640     2005_1_700     UPG WITH SAINT PACK
Here is the output file:
more CONFLCHK.LOG
1 ETQ201XEntering upgrade-phase "CONFLICT_CHECK" ("20071011155952")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '30', GwService = 'sapgw30'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPBWS
4 ETQ399   auth_shadow_upgrade=0
4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
2 ETQ160 Starting conflict check
4 ETQ010 Date & Time: 20071011155952
4 ETQ230 Starting RFC Login to: System = "BWS", GwHost = "sapbws", GwService = "sapgw30"
4 ETQ233 Calling function module "SPDA_CONFLICT_CHECK" by RFC
2 ETQ161 Conflict check failed, rc = "-2", reason = "Internal error: OCS_COLLECT_ADDON_TASKS: MISSING_CMD_IMPORT SAPK
INBC9D"
4 ETQ010 Date & Time: 20071011155952
As you can see it is looking for SAPKINBC9D. This is not an addon package I selected. The PI_BASIS uses SAPKINBC9A. I checked SEPS (EPS admin) and do not see this. I also tried to search for this file on service.sap.com and do not see it. I have no idea what could be causing this. Please help!
Erika

Hello,
If I remember correctly it was the version of PI_BASIS. I ended up upgrading the following addon's during the upgrade follows:
PI_BASIS     2005_1_640     2005_1_700     Inst/UPG with STD CD
BI_CONT     353     703     UPG WITH SAINT PACK
ST-A/PI     01F_BCO640     -     DELETE
ST-PI     2005_1_640     2005_1_700     UPG WITH SAINT PACK
After the upgrade, I applied the PI_BASIS upgrade and support packs.

Upgrade stoped in phase "RFCCHECK_INI". Error: " RFC_ERROR_SYSTEM_FAILURE"

Dear friends,
Please take a look of this case. Is related with a SAP 4.6C (I386/Oracle) upgrade process to SAP ECC 6.0 (I386/Oracle).
Thanks for any help.
Xavier Pol
Case:
====
"RFC_ERROR_SYSTEM_FAILURE" raise in phase "RFCCHK_INI" running the Upagrde Asistance. This is the error show:
Error: RFC of "subst_get_uvers" failed.
Key : RFC_ERROR_SYSTEM_FAILURE
message:
User not authorized. Sesion terminated.
Aditional Information:
========================
- SAPup version (SAPup -V):"This is SAPup version 7.00/2, build 24.067"
- The logon in client "000" with user DDIC, was succesfull
Log RFCCHECK_INI.LOG
===================
1 ETQ201XEntering upgrade-phase "RFCCHK_INI" ("20070605161205")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
4 ETQ220 Reading table "UVERS" via RFC
4 ETQ359 RFC Login to: System="PRD", Nr="00", GwHost="sapupg", GwService="sapgw00"
4 ETQ359 RFC Login to: System="PRD", Nr="00", GwHost="sapupg", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_GET_UVERS" by RFC
2EETQ360 RFC of "subst_get_uvers" failed:
2EETQ361 code/exception : SYSTEM_FAILURE
2EETQ362 key             : RFC_ERROR_SYSTEM_FAILURE
2EETQ364 message         :
2EETQ399 User not authorized. Session terminated
4 ETQ359 RFC Login to: System="PRD", Nr="00", GwHost="sapupg", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "SUBST_GET_UVERS" by RFC failed (error-status "-2")
4 ETQ239 Logging off from SAP system
2EETQ217 Reading UVERS entry via RFC failed
1EETQ204 Upgrade phase "RFCCHK_INI" aborted with severe errors ("20070605162847")

Greetings All
I am doing a CRM upgrade and I get this exact same error. The DDIC passwords were changed in the 000 client and 001 clients from the default. (question how do I check the shadow system?) I updated the parameters in the SAPup via
set DDICpwd
set shdDDICpwd
and yet I still get the error
Should I reset the DD pwd to the SAP default then update the SAPup parameter with the new password?
I check the function module SUBST_GET_UVERS on se37 for execute the test and execute and the table returns with 0 entries under Tables.
TT_UVERS Value 0 entries
Is this the problem? If so how can this be resolved?
Please help, any feedback is much appreciated.
ps...how and where do I find the RFCCHK_INI.LOG file?

SEVERE ERROR in Upgrade Phase ADDON_SPEC2

I`m trying to upgrade R/3 Release 4.6C to SAP ECC 6.0 SR3 (7.0) Abap:
Unix - Oracle.
I found no errors in log files.
I have successfully completed all the PREPARE PHASES.
Source System:
SAP release: R/3 Release 4.6C
DB version: 10.2.0.2
S.O. version: HP-UX B.11.23 U ia64
Kernel: 46D_Ext
Target System:
SAP release: ECC 6.0 R/3 (7.0)
DB version: 10.2.0.2
S.O. version: HP-UX B.11.23 U ia64
Please help,
Regards,
Erick

more SAPup.log
UPGRADEPHASE ADDON_SPEC2
...started at 20090219124818
Phase log file: 'ADDONSPEC2.LOG'
..finished at 20090219124818 with SEVERE ERROR(S).
...begin dialogue at 20090219124818
...end dialogue at 20090219135001
..answered at 20090219135001.
-> decided to exit.
more ADDONSPEC2.SAV
#---- MASKING file ADDONSPEC2.LOG from /usr/sap/put/log
#---- TIME: 20090219124818
1 ETQ201XEntering upgrade-phase "ADDON_SPEC2" ("20090218183020")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPSP1
4 ETQ399   auth_shadow_upgrade=0
ADDONSPEC2.SAV: END
more ADDONSPEC2.LOG
1 ETQ201XEntering upgrade-phase "ADDON_SPEC2" ("20090219124818")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPSP1
4 ETQ399   auth_shadow_upgrade=0
Some idea,
Erick

Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors

Hi ,
Need some assistance. Logged message with SAP AG, still waiting for response.Anyone that can assist will be appreciated. Error from logs.
/usr/sap/put/log# more SEDCORG.LOG
1 ETQ201XEntering upgrade-phase "SQLSCREXE_ALI_ORG" ("20061108125644")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=1
4 ETQ380 computing toolpath for request "TP_EXECDBSCRIPT_NEW"
4 ETQ381 request "TP_EXECDBSCRIPT_NEW" means "execdbscript with 46A feature"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ276 Executing SQL-script "ALORDC.XQL"
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/exe
4 ETQ399 ext. env.: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131
/jre/bin:/usr/java131/jre/bin/classic
4 ETQ399 2006/11/08 12:56:44: put_execute: (tp) forkpid:97258
2EETQ278 Errors during execution of SQL-script "ALORDC.XQL"
1EETQ203 Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors ("20061108125645")
Checked TPSQLSTD.OUT log
/usr/sap/put/log# more TPSQLSTD.OUT
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 97258 at 20061108125644
ENV <0x2ff22d14>: dbms_type=ORA
ENV <0x2ff22d22>: dbs_ora_tnsname=BB1
ENV <0x2011c290>: dbs_ora_schema=SAPR3
ENV <0x2ff22d4b>: ORACLE_PSRV=BB1
ENV <0x2ff22d5b>: ORACLE_SID=BB1
ENV <0x2ff22d75>: ORACLE_HOME=/oracle/BB1/102_64
ENV <0x2ff22d94>: ORACLE_BASE=/oracle
ENV <0x2ff22da8>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
ENV <0x2ff22ddf>: NLS_LANG=AMERICAN_AMERICA.US7ASCII
ENV <0x20147368>: DIR_LIBRARY=/usr/sap/put/exe
ENV <0x2014864c>: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131/j
re/bin:/usr/java131/jre/bin/classic
ENV <0x2011be90>: auth_shadow_upgrade=1
EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL
This is /usr/sap/put/exe/tp version 370.00.09 (release 700)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
2EETP000 sap_dext called with msgnr "2":
2EETP000 -
db call info -
2EETP000 function:   db_ntab
2EETP000 fcode:      NT_RDTDESCR
2EETP000 tabname:    TADIR
2EETP000 len:        5
2EETP000 key:        TADIR
2EETP000 retcode:    2
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 97258
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0200
tp finished with return code: 200
meaning:
ERROR: see tp's stdout (Standard Out may not be available)
Process with ID 97258 terminated with status 200
History : Original problem was related to environment variables for DIR_LIBRARY. Resolved that issue; UaGui was started as root and not the <sid>adm user. UaServer was started as correct user. Killed session and logged on as <sid>adm restarted UaGui as the correct user. Now this error comes up, SAPup won't allow me continue or retry
Replaced tp, r3trans and SAPup tools. Also when I run the cmd /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL in a seperate session, it completes successfully and creates the necessary views as described in ALORDC.XQL. I checked the ALORDC.LOG to confirm this.
Kind Regards,
Ricky Padayachee

Hi John,
The problem I had was wrong environment when starting the Uagui and Uaserver, must be started as adm user. I also restarted the installation from scratch...
I had an issue with a duplicate database object, SVERS in my case. I dropped the object not required and restarted phase, went through fine.
Let me know, how it goes.
Regards,
Ricky

G580 Upgrade to Windows 10 failed in the SAFE_OS phase with an error during BOOT operation

0xC1900101-0x20017 I could not successfully upgrade from windows update, nor from the straight download site. The installation failed in the SAFE_OS phase with an error during BOOT operation. I see w10 bios updates for other models. Has anyone been successful in upgrading to W10 from W8?

2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:21, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >:uspend(1066): Result = 0xC18001042015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteInstallMode(656): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::Execute(222): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupHost::Execute(370): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216
2015-07-31 21:36:36, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:36:40, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:37:02, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:03, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:11, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:15, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:18, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]

Reg: Upgrade Phase RUN_UACC_POST

Hi All,
We are in process of upgrade fro 4.7SR1 to ECC6.0 SR3 ( O/S Sun Solaries & Database is Oracle)
Right now we are facing issue in the Phase RUN_UACC_POST. The Log file shows
geupg:updadm 12% more UACCUPG.LOG
1 ETQ201XEntering upgrade-phase "RUN_UACC_POST" ("20081214225715")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPUPD
4 ETQ399 auth_shadow_upgrade=0
4 ETQ010 Date & Time: 20081214225715
4 ETQ265 Starting report "UACC_UPG_STEPS" with variant "SAP_UPG_POST" in batch
4 ETQ359 RFC Login to: System="UPD", Nr="00", GwHost="geupg", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
2WETQ360 RFC of "subst_start_report_in_batch" failed:
2WETQ361 code/exception : BATCH_SCHEDULING_FAILED
4 ETQ359 RFC Login to: System="UPD", Nr="00", GwHost="geupg", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
2EETQ261 Start of batchjob "UACC_UPG_STEPS" failed
2EETG890 Exception "BATCH_SCHEDULING_FAILED" raised, job scheduling failed with error code -1
1EETQ204 Upgrade phase "RUN_UACC_POST" aborted with severe errors ("20081214225717")
Please check and update the solution.
Regards,
Venu

Hi All,
The issues has been resolved by applying Support Pack ST-PT 2005_1_700 (SAPKITLQI6)
Regards,
Venu

ECC6 upgrade phase XPRAS_UPG running for long time

Hi,
I am performing a Downtime minimized upgrade (MODPROF_TRANS) from R34.7ext2 to ECC6.0 / Windows2003/MSSQL2005
Currently i am in the phase XPRAS_UPG .It is running for really long time.I tried to reset the phase but still went on for more than 10 hrs. I initialized the phase now its running for more than 7 hours. There are no processes when i check in SM50 and no log files updated. There is no log file called XPRAS_UPG.ELG.SM37 no jobs running.
Though if it takes long time , How do i confirm that my upgrade phase is running ??????????as its not updating anything
In PARDIST_SHD phase when there was en error , i have manuall deleted the DB trigger acording to the note 956198. And the phase went on.
Now after reading few messages reg this error , i checked DB02 but no locks on any table . Have cheked note 558197,1292069,1142410,1138351,1062559,597885,551298. But nothings applicable in my case.
Please suggest ...
will really appreciate your help.
Chandra

Dear Chandra,
Regarding long runtime for XPRAS phase kindly note the following:
1. The reason of slow performance of XPRAS phase can vary differently.
Basically during XPRAS phase, there're a lot of reports to run. These
reports are inlcuded in the transport requests(both upgrade
requests and support packages). If there's a performance problem,
it very likely the database performance problem, such as wrong
access plan was chosen, or missing index, etc.
2. To find out the performance problems in the XPRAS, you can always
logon into the system. During the XPRAS phase, the system has to be up and running.
In SM50, usually you can find which report is running, and/or which table is being accessed.
If you find some table accesses take unusually long time, please
record the table name and find the SQL statement. Sometimes a simple
index can solve the problem, sometimes you need help from Oracle
to get the solution.
3. If you want to shorten the downtime, you can select less support
packages since all SPs have a lot of reports to run in XPRAS. But
remember you need to import them soon or later. But if you prefer
import them later it's fine.
Currently if you check in SM37 then you can see RDDEXECL job in active status.
Check for the job log, if there are any errors reported?
Thereafter check the SM50 and see if its taking unusually long time for some particular table.
If so then it might be because you might have not updated the statistics for that particular table.
Also check what was the parameter value of Number of batch processes defined by you
for upgrade. If you have defined very less number of batch processes for upgrade then also
it will take more time.
Check accordingly and let me know for further help.
Regards,
Abhishek
Edited by: Abhishek Srivastava on May 9, 2010 10:57 AM

ECC 6.0 Enhancement Pack 5 upgrade phase ADJUSTCHK faillure

When I run the Enhancement Pack Installation, I get a hard failure at the MAIN_SHDCRE/ADJUSTCHK phase. The error message says "No lines found in logfile matching "UMODPRO\.INX". The log follows...
1 ETQ201 Entering upgrade-phase "ADJUSTCHK" ("20111006131443")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_SHDCRE/ADJUSTCHK'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'SAP_MOD_EHP'
2 ETQ399 Arg[1] = 'ADJUSTCK.ELG'
2 ETQ399 Arg[2] = 'ADJUSTMT.INF'
4 ETQ010 Date & Time: 20111006131443
4 ETQ265 Starting report "RSUMOD01" with variant "SAP_MOD_EHP" in batch
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RSUMOD01" with job count "13144400" scheduled
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20111006131819
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ248 Missing log file(s) of report "RSUMOD01", matching "UMODPROT\.INX"
What does this mean?
Is the backslash supposed to be in the name UMODPROT.INX?

Hi,
Please check in SM37 if there is any job failure in the system. And also check if there is any dump.
Thanks
Sunny

I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs.

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.

Upgrade-phase "SYIDUP_EXTRACT/PROFREAD" error

Similar Messages

Maybe you are looking for