Upgrade to SCCM 2012 R2: WinPE 5.0 and Legacy system.

Hi,
When upgrade to SCCM 2012 SP1 we get WinPE 4.0 boot images, and the PXE-boot did not working with CPU's that do not support NX/PAE/SSE2.
SCCM 2012 R2 need "ADK for Windows 8.1" with WinPE 5.0. I think it is same with WinPE 5.0 that it dont working with CPU's that do not support NX/PAE/SSE2.
Is there something else to considerations with WinPE 5.0 boot with Legacy systems?
ref:
http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/03/03/winpe-4-0-boot-images-not-working-with-cpu-s-that-do-not-support-n
/SaiTech

I think the link you posted is broken, but this one works:
http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/03/03/winpe-4-0-boot-images-not-working-with-cpu-s-that-do-not-support-nx-pae-sse2.aspx
You can still use WinPE3.1, for those legacy computers:
http://blogs.technet.com/b/brandonlinton/archive/2013/06/21/how-to-create-and-import-a-winpe-3-1-boot-image-for-use-in-configmgr-2012-sp1-cu2.aspx
http://technet.microsoft.com/en-us/library/dn387582.aspx
http://technet.microsoft.com/en-us/library/hh397288.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Reports no longer work after upgrading to SCCM 2012 R2

I upgraded my SCCM 2012 SP1 environment to R2 and reports no longer work. I've removed the site role, waited a day, and added it. I've also verified the account (used by the reporting site role) has access to the DB and can logon locally. The
problem still persists. Here's a copy/paste of the error:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Cannot read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
Microsoft.Reporting.WinForms.ReportServerException
Conversion failed when converting the nvarchar value 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXscrubbed' to data type int.
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I've tried many other TechNet solutions as well with no improvement:
http://social.technet.microsoft.com/Forums/en-US/ae08aa43-054d-47e7-99fb-c4f101962478/reports-not-working-after-upgrade-to-sccm-2012-r2-?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/77bad9b6-de0e-42d3-ae9f-e7c9d26b4330/reporting-error-after-upgrading-to-sccm-2012-r2?forum=configmanagergeneral
Any other thoughts on this?

So to be clear you have Done both the Mofcomp and Added the correct account to the Windows Authorization Access Group?
What is version of SQL are you using?
Is SSRS remote or local to CM12?
What service account are you using for SSRS?
Bases on the error message you are getting this within the console, Does the native SSRS report work? BTW I never recommend accessing the report via the console.
http://be.enhansoft.com/post/2013/09/10/Should-Configuration-Manager-SSRS-or-ASP-Reports-be-Accessed-from-the-Browser-or-the-Console.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Upgrade from SCCM 2012 SP1 CU4 to R2 Fails - Unsupported Upgrade Path

Hi everybody,
I'm currently upgrading our SCCM infrastructure to SCCM 2012 R2 after have finished with the upgrade from SCCM 2012 RTM to SP1 CU4, thus far everything works fine, but when I try to update any
of the site servers, whether CAS or Primary, I'm getting the following error message in the Prerequisites Check:
I've gone through the system requirements and prerequisites over and over again and I can assure you that every possible update, supported OS, feature set, SQL Server, check list, etc,
etc, have been followed as per the official documentation available, however I'm stuck in this point, and surely enough I haven't been able to find out a similar case.Additionally I'm adding
the ConfigMgrPrereq log (the relevant portion of it) in case someone could kindly take a look at it.
<04-25-2014 02:06:46> ******* Start Prerequisite checking. *******
<04-25-2014 02:06:47> ********************************************
<04-25-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade,
minimum supported installed build version is [7804].
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Unsupported upgrade path;    Error;
Configuration Manager has detected that one or more sites in the hierarchy are installed with a version of Configuration Manager that is not supported for upgrade.
<04-25-2014 02:07:00> INFO: This rule only apply to primary site, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Active Replica MP;    Passed
<04-25-2014 02:07:00> INFO: This rule only applies to primary or secondary site in hierarchy, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Parent site replication status;    Passed
<04-25-2014 02:07:00> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:00> ===== INFO: Prerequisite Type & Server: SQL:INFPROSCCMCDB.usersad.everis.int
=====
<04-25-2014 02:07:00> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;
SQL Server sysadmin rights;    Passed
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;    SQL Server sysadmin rights
for reference site;    Passed
<04-25-2014 02:07:00> INFO: CheckLocalSys is Admin of <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Site server computer account administrative rights;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server security mode;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: OS version:601, ServicePack:1.
<04-25-2014 02:07:09> INFO: Target computer is a Windows server.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Unsupported site server operating system version for Setup;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Domain membership;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Pending system restart;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: Return code:0, Major:10, Minor:50, BuildNum:4000
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server version;    Passed
<04-25-2014 02:07:09> INFO: Get Sql edition:Enterprise Edition.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Edition;    Passed
<04-25-2014 02:07:09> INFO: Checking Tcp is enabled to Static port, SQL Server:INFPROSCCMCDB.usersad.everis.int,
Instance:.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Tcp Port;    Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is limited.
<04-25-2014 02:07:09> INFO: SQL Server memory is limited.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Configuration for SQL Server memory usage;    Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<04-25-2014 02:07:09> INFO: Installing the central administration site or primary site, requires SQL
Server to reserve a minimum of 8 gigabytes (GB) of memory.
<04-25-2014 02:07:09> WARN: SQL Server minimum memory is 8000 MB.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;    SQL Server process memory allocation;
Warning;    Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by
using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio. For more information about how to set a fixed amount of memory, see
http://go.microsoft.com/fwlink/p/?LinkId=233759.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Case-insensitive collation on SQL Server;    Passed
<04-25-2014 02:07:09> INFO: Check Machine FQDN: <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFO: getaddrinfo returned success.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Validate FQDN of SQL Server Computer;    Passed
<04-25-2014 02:07:09> INFO:CheckSupportedFQDNFormat <INFPROSCCMCDB.usersad.everis.int>
<04-25-2014 02:07:09> INFO: NetBIOS <INFPROSCCMCDB>
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Primary FQDN;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:09> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:09> ===== INFO: Prerequisite Type & Server: SDK:INFPROSCCMCMS.usersad.everis.int
=====
<04-25-2014 02:07:09> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:09> INFO: The rule 'Administrative rights on site system' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: The rule 'Unsupported site server operating system version for Setup' has
been run on server 'INFPROSCCMCMS.usersad.everis.int', skipped.
<04-25-2014 02:07:09> INFO: The rule 'Domain membership' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> INFO: Windows Cluster not found on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Failover Cluster;    Passed
<04-25-2014 02:07:10> INFO: The rule 'Pending system restart' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:10> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Deployment Tools installed;    Passed
<04-25-2014 02:07:10> INFO: CheckAdkWinPeInstalled on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;    Windows Preinstallation Environment
installed;    Passed
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
SMS Provider machine has same domain as site server;    Passed
<04-25-2014 02:07:10> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:10> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:10> ***************************************************
<04-25-2014 02:07:10> ******* Prerequisite checking is completed. *******
<04-25-2014 02:07:10> ******************************************<04-25-2014 02:07:10> INFO: Updating
Prerequisite checking result into the registry
<04-25-2014 02:07:10> INFO: Connecting to INFPROSCCMCMS.usersad.everis.int registry
<04-25-2014 02:07:10> INFO: Setting registry values
If you wonder whether it might be related to this error:
-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade, minimum supported installed build version is [7804].
I confirm that this one site is a secondary one that's attached to a primary site and this log is from the CAS server, I managed to tall it and delete it from that site, but still appears listed
on the CAS management console, any idea how to force the removal of a secondary site that's attached to a primary from the CAS site when it has been removed already from said primary?
I've already tried the
Preinst /DELSITE XXX command but it only works when the site to remove it's attached to the local site and certainly not from a CAS
Finally, the version, build number and everything is correct, no idea what could be the problem, does anybody know a way to bypass this or force the re-evaluation of this rules, I've got
the impression that it's being cached somehow.
Any help would be highly appreciated,
Thank you.
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

Hello again everybody,
I've finally managed to fix this up, in the end I had to delete those entries manually from the database as Garry suggested. After this was done the upgrade has gone through as expected with no further ado and has finalized already, now moving on to the
primary sites.
If anybody out there is facing the same issue, what I did was to delete those "stubborn" records executing the following statements over the CAS database:
DELETE
FROMServerDataWHERESiteCode='XXX'
DELETE
FROMSC_SiteDefinitionWHERESiteCode='XXX'
And this is pretty much about it. I'd recommend to take a proper backup first though as best practice.
Thank you all anyways for your answers and comments,
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

Reports not working after upgrade to SCCM 2012 R2 -

I am having the same issue described in this post:
http://social.technet.microsoft.com/Forums/en-US/30f185ac-c34e-44ad-87eb-7d180a0d76b8/after-2012-r2-upgrade-some-sql-queries-wont-run?forum=configmanagergeneral
When running reports after upgrading from SCCM 2012 SP1 CU2 to SCCM 2012 R2 I get the following error:
An
error has occurred during report processing. (rsProcessingAborted)
Cannot
read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Conversion
failed when converting the nvarchar value
'S-1-5-21-1010966800-777871707-395339515-124623' to data type int.
I have removed the Reporting Services Point and reinstalled it with no effect. All reports I try get the error listed above.
Any suggestions?

The issue has been resolved. For anyone experiencing a similar issue I will post the fix that worked for us below:
I ended up opening a PSS case and in this instance the problem was the required SQL management provider was not properly registered in WMI, which ultimately meant the reporting point upgrade/install was not able to complete successfully after the upgrade.
As a result the updated reports were not properly being redeployed to the Reporting Service Point.
To diagnose this on the Reporting Service Point look in the srsrp.log for entries indicating of an
Invalid Class, as seen in the example below:
Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Could not retrieve the reporting service name for instance 'RPSERVER' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Could not stop the reporting service '' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Next security configuration at [11/6/2013 5:52:12 PM] SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Root Folder exists SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Successfully checked that the SRS web service is healthy on server SERVERRP.AD.DOMAIN SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
SRSRP registry key change notification triggered. SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Timed Out... SMS_SRS_REPORTING_POINT 11/6/2013 5:48:13 PM 6096 (0x17D0)
The important part is the lines saying Invalid Class and then it timing out, so the RP installation was not completed.
As mentioned earlier the WMI class that was missing or corrupt was the SQL management Provider. To re-register the class we need to compile the MOF file that is available in SQL. In our instance the command to run was:
mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
Once that was done, monitoring the srsrp.log shows that it could properly detect the SSRS service, stop it and start coping the updated reports and such. After a few minutes the deploy completed, and all the broken reports started working
correctly.
Hope that helps someone else.

Reporting Error After Upgrading to SCCM 2012 R2

After upgrading from SCCM 2012 SP1 CU2 to SCCM 2012 R2, some users receive an error whenever they open a report. This occurs in both the SCCM console and the SSRS web site. What's odd is not all users receive the error. In fact, for two
users with the exact same permissions, running the console on the same computer, 1 gets the error and the other doesn't. Anybody else see this or have any ideas to troubleshoot or fix it? I'm thinking this may relate to the fix for permissions
in reporting included in R2.
The error message from the console is:Microsoft.Reporting.WinForms.ReportServerException
The DefaultValue expression for the report parameter ‘UserSIDs’ contains an error: The user name or password is incorrect.
(rsRuntimeErrorInExpression)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
The following error is logged in the SSRS logs:
processing!ReportServer_0-1!12d0!10/31/2013-15:28:48:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Exception of type 'Microsoft.ReportingServices.ReportProcessing.ReportProcessingException' was thrown.;

I just wanted to share my last upgrade experience with you, in case, someone is running into the same problem:
I've just upgraded to SCCM 2012 R2 CU4 (from CU3).
Guess what? It broke the Reporting, error message as above!
So I've put the computeraccount of my SCCM/SSRS server (SSRS service is running under local system account) into the WAA group, reboot - but it didn't help. Tried also the Pre-Win2000-Compat-group. Didn't help. A colleague was not experiencing the problem.
Hmmm. So what is different between our accounts?
The difference found: My account's userPrincipalName was set to the same as the sAMAccountName, but missing a domain. The account was obviously created by a bad script.
Solution 1: Delete the userPrincipalName attribute, or
Solution 2: Make the userPrincipalName complete by adding a valid domain, i.e. [email protected]: In the Active Directory Users and Computers mmc, User Properties, Account tab, select a domain for the "User logon name".
The problem seems to be only for user accounts, that are in a different domain than the SCCM server's account, i.e. server in example.com, user account in sub.example.com. Always multi-domain problems...
Thorsten Lau - IT-Lösungen http://blog.system-center.de

Upgrade to SCCM 2012 R2 Failed - Can I Simply Move SCCM Database to Replacement SCCM 2012 R2 System?

I started with SCCM 2012 RTM and attempted an upgrade to SCCM 2012 R2. The upgrade failed and left the the system unusable. I was able to recover the entire system (single server) from backup.
Rather than risk another failed upgrade can I simply build a new server and move the existing SCCM database to a new SCCM 2012 R2 system?

Hi,
Here is an official article talks about Upgrade for your reference.
Planning to Upgrade System Center 2012 Configuration Manager
http://technet.microsoft.com/en-us/library/jj822981.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Upgrade to SCCM 2012 R2

Which download do I choose in Microsoft Volume license to upgrade my SCCM 2012 SP1 to R2?

Mine looks like this:
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Duplicate Reports after upgrading to SCCM 2012 R2 CU1

Single Primary Site with SCCM 2012 R2 CU1.
Upgraded from SCCM 2012 SP1.
Duplicate Reports after upgrading to SCCM 2012 R2 CU1
SCCM 2012 R2 CU1
SQL 2008 SP3 CU 14

This is known to happen if you modified any of the default reports
I've seen that happening even in my lab (and and customers) where I am sure that I did not modify them. Just delete them (they should be prefixed with "_").
Torsten Meringer | http://www.mssccmfaq.de

¿Is it possible to upgrade from SCCM 2012 a domain controller in Windows Server 2008 R2 TO 2012 R2?

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.
Anything is possible if you can script it. You could create a task sequence to do the following (with scripts):
1. Demote 2008R2 DC to member server
2. Remove 2008R2 member server from domain
3. Build new 2012R2 member server and join to domain
4. Promote 2012R2 member server to DC
You can do this. However, why would you? Just because you can doesn't mean you should. In my opinion it's more trouble and testing than it's worth. How many times would you need to do this?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 R2 client version 1101 and 1104 queries

There are several samples of collection query code for SCCM 2012 R2 client version 5.00.7958.1000, which is the base R2 client version. Patches can change this to 5.00.7958.1101 and 5.00.7958.1104. But there is a problem. These two patches
display as 1101 and 1104 when you go to Control Panel\Configuration Manager\General tab but when you go to Programs and Features and look in there the DisplayVersion is 5.00.7958.1000--so all query code samples are unable to different between the base versions
and version 1101 and 1004. I have been unable to find out how to write a query that finds version s 1101 and 1104. Does anyone know how to do this? Thanks.

Use ClientVersion from SMS_R_System within a console query or ClientVersion0 from V_R_system in a SQL query.
Even this can be deceptive though because the agent only reflects the highest version number of one of its subcomponets. This post, specific to 2007, describes the complexity: http://blog.configmgrftw.com/configmgr-client-hotfix-versioning/.
Specific to your question though, why do you care if either of these hotfixes are distributed to your clients? 2905002 is only necessary during WinPE (and if you are actually not using download on demand content during OSD) and 2910552 is only applicable
if you are rolling out Win 8.1 using a single TS to your XP systems using a refresh methodology.
Jason | http://blog.configmgrftw.com

Software Asset Management Solution Accelerator for SCCM 2012 (Contracts, Licenses, Userights, Installations and net usage

Hello All
With the given need from the market to manage license compliance proactively - the givven toolsets from MS SCCM 2012 should be capable of handling the given complexity. (reference 27 processes out of SAM ISO 19.770-1:2012
Where can I find the solution accelerator, which guides us to help clients on two tipical use-cases
a.) Client has SCCM 2012 - however not yet established the SAM componentes to it (Contracts, Use-rights and License-Comparizons)
b.) Client has no SCCM yet and wants to start his journey with the Commercial scope right away.
Any guidance highly appreciated

SCCM alone isn't going to fit this need.
You need a License Compliance Solution / Software Asset Management (SAM) solution which SCCM is not.
The issue with those system, they fail of providing clean /usefull data.
Usually the best approach is to collect the data with SCCM, normalize the data for that I used BDNA Normalize, then pull in the SAM.
Like this:
SCCM 2012 - Normalize - SAM
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

Is there Java API available for third-party integrations with SCCM 2012? I went through the "Developer's Survival Guide", and it seems that SCCM 2012 SDKs only support C# and PowerShell

Hi All,<o:p></o:p>
My team and I are developing a software using java that works closely with IT management software such as SCCM. Our software will be highly dependent on data stored in SCCM. Basically
our software will talk to SCCM to get information about a system managed by SCCM. To be able to do that, our software needs to use a java API that talks to SCCM. Is there a java API for SCCM 2012 that we can use? If there is not, what is the work around to
this issue (integrate a java project with SCCM SDKs)? Any help is appreciated! Thanks!<o:p></o:p>

Hi,
As you mentioned, it seems that there is no available Java API for SCCM .
Just curious, what's information you want to get from SCCM.
Based on my experience, you could query the SCCM site database to get almost all the information.
Otherwise, your question seems to be related to SCCM 2012. You may also choose to post there to get more effictive help.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Does sccm 2012 supports ibcm for linux and unix operating systems

folks,
does SCCM 2012 supports linux and unix operating system for IBCM ..........as per my knowledge it dont what i have learn t through bing........

I thought it's not supported for Linux and Unix, see also:
http://blogs.msdn.com/b/teju_shyamsundar/archive/2014/05/23/installing-the-system-center-2012-r2-configuration-manager-client-on-linux-part-2.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Orchestrator and SCCM 2012 integration: run task sequence and install assigned applications/packages?

Dear,
We do not have Orchestrator running in our SCCM 2012 R2 environment. Though I wonder if we could accomplish the following scenario with it:
Task sequence Windows 7 => Orchestrator step which queries assigned installations to the computer object and installs them one by one.
Could you advise?
Kind regards,
Stev.
SteveWonB

> > Define "assigned to computer objects". How is this done technically?
Well, computer objects are members of collections via AD memberships, like the collection "W7-Google-Chrome" (exists of 100 computer objects).
Deploy of packages is done to these collections. So a computer member of "W7-Google-Chrome" will automatically get Google Chrome.
Some computers are member of 30 collections, some of 80.
Goal is to have the task sequence run all applications/packages assigned (with their reboots if needed).
Kind regards,
Steven
SteveWonB

SCCM 2012 Client - Powershell to Patch and Reboot

Powershell script to install all outstanding security patches and reboot server having sccm 2012 client.
([wmiclass]'ROOT\ccm\ClientSDK:CCM_SoftwareUpdatesManager').InstallUpdates([System.Management.ManagementObject[]] (Get-WmiObject -Query 'SELECT * FROM CCM_SoftwareUpdate' -namespace 'ROOT\ccm\ClientSDK'));
while (!((gwmi -Namespace 'ROOT\ccm\ClientSDK' -Class 'CCM_ClientUtilities' -list).DetermineIfRebootPending().RebootPending)){
Write-Host "Patching";Start-Sleep -s 120;
if((gwmi -Namespace 'ROOT\ccm\ClientSDK' -Class 'CCM_ClientUtilities' -list).DetermineIfRebootPending().RebootPending)
{(Get-WmiObject -Namespace 'ROOT\ccm\ClientSDK' -Class 'CCM_ClientUtilities' -list).RestartComputer()}

If your clients are member of an Active Directory, you could also use a startup script to update the client.
Jason has a very popular script you can use:
http://blog.configmgrftw.com/configmgr-client-startup-script/
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Upgrade to SCCM 2012 R2: WinPE 5.0 and Legacy system.

Similar Messages

Maybe you are looking for