Upgrade to Win 7 (64bit) from Vista 32 - Not enough H Disk space after running Windows easy transfer

Hello all!
I upgraded from Vista 32 to Windows 7(64bit) using the custom install as per instruction found on Lenovo and the upgrade has gone well. My machine is running much better and faster now. However, I tried to transfer my files with easy transfer and I have run out of room on the HD. After the install, my C drive had about 35 Gigs with no other programs installed except for Win 7. This seems to be too much memory used for win 7 OS. I am thinking that other data like past restore data may be taking up a lot of room? Also my Easy transfer file is 79 gigs which also appears to large of a file. I have not been able to use Easy Transfer because of lack of drive space. Can I reformat my HD and run a new win 7 install from the Win 7 upgrade software CD?
Thanks in advance?

Problem Solved!!!
This problem was related to the NVIDIA chip defect on the mother board. Please see:
http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T61-Nvidia-Quadro-NVS-140M-garbled-displ...
Thanks!

Similar Messages

Can't send emails after migration from Vista PC to W7 PC. Tried Mozbackup and Windows Easy Transfer. Settings have transferred ok, it just won't send emails.

I recently migrated my Tbird from a Vista PC to a W7 PC using Mozbackup. Transfer was fine with all the settings transferred apparently correctly. But now I can receive emails but not send them. Sent emails show in 'Sent Items' but are not received the other end. Also tried the migration using the Beta 1 version of Mozbackup and also Windows Easy Transfer with the same result. IMAP and POP3 accounts are both affected. Neither can send emails. I get no error messages nor any bounceback.
Found on one forum that AVG can block outgoing emails so altered the AVG settings which seemed to solve the problem. The next morning the problem was back. I uninstalled AVG completely but it made no difference. I do have MicroSoft Sec Essentials but the problem was there before that was installed.
Using the BT Home Hub 5 on BT Infinity broadband. It can't be the router though as the old PC was sending emails fine. Although I did have the suspect AVG settings, removing it has not solved the problem.
The outgoing email settings seem to be fine. Any thoughts?
Simon

Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]

SMB errors copying from Windows Mac serv - "Not Enough Free Disk Space"

Mac OS X 10.5.5 server with 4TB usable internal space (RAID5 volume) shared out via SMB so that windows workstations (XP Pro SP3) on local subnet can mount them.
when copying files from internal drives on workstations to SMB share on the Mac fileserver, I get no problems. When copying files from external (USB 2.0) drives from workstation to server, i get constant errors of:
"Cannot copy x: There is not enough free disk space. Delete one or more files to free disk space, and then try again."
I've tried all different combinations of SMB settings with permissions and opt locks etc, but so far found nothing that works.
Anyone run into this and resolved it?

UPdate Update... after turning logging to high, i've found the following error in my SMB logs upon copying one of the seemingly random files (I can now make the error happen by copying the same file that caused the error)
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/dosmode.c:unix_mode(90)
unix_mode(.) inheriting from .
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/dosmode.c:unix_mode(99)
unix_mode(.) inherit mode 40755
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/open.c:open_directory(2105)
open_directory: unable to create .. Error was NTSTATUS_OBJECT_NAMECOLLISION
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/dosmode.c:unix_mode(90)
unix_mode(test123.jpg) inheriting from .
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/dosmode.c:unix_mode(99)
unix_mode(test123.jpg) inherit mode 40755
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/open.c:open_file(391)
z2e opened file test123.jpg read=No write=Yes (numopen=2)
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/dosmode.c:unix_mode(90)
unix_mode(test123.jpg:Q30lsldxJoudresxAaaqpcawXc:$DATA) inheriting from .
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/dosmode.c:unix_mode(99)
unix_mode(test123.jpg:Q30lsldxJoudresxAaaqpcawXc:$DATA) inherit mode 40755
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/open.c:open_file(391)
z2e opened file test123.jpg:Q30lsldxJoudresxAaaqpcawXc:$DATA read=No write=Yes (numopen=3)
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/close.c:closenormalfile(399)
z2e closed file test123.jpg:Q30lsldxJoudresxAaaqpcawXc:$DATA (numopen=2) NTSTATUSOK
[2008/10/30 18:33:59, 2, pid=4571] /SourceCache/samba/samba-187.8/samba/source/smbd/close.c:closenormalfile(399)
z2e closed file test123.jpg (numopen=1) NTSTATUSOK

ITunes manually added artwork is missing after Windows Easy Transfer from XP to Windows-7. Please help!

After a Windows Easy Transfer from a Windows XP pc to a new Windows-7 pc, all the iTunes artwork that I had previously manually added is now missing. I estimate 25-30% of my CDs needed manual intervention to add artwork. Some of these were album covers I found on the web but many are photos that I took and cropped but have not retained. I have nearly 20,000 songs. Every one had artwork on my XP machine. Now on Windows-7 it appears to be missing. I spent many patient hours to get artwork in place for all my music and don't want to loose it or have to repeat the process. Please help! Many thanks for any contributions.

Hi Funster58,
Please try the following methods to solve this issue:
Method 1: Perform a clean boot.
A clean boot helps to verify if any third party application services or startup item is causing this issue. For your information, please review this KB article to put the computer in clean boot:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
Note: Make sure you put the computer back to Normal Startup once you are done with the troubleshooting.
Method 2: Run SFC Scan
System File Checker (SFC) scan can troubleshoot missing or corrupted system files on your computer. For your information.
Type cmd in the
Start, and right-click the Command Prompt, and then click Run as administrator in the below of screen.
Type sfc /scannow, and press Enter.
Method 3: Run check disk
Type cmd in the
Start, and right-click the Command Prompt, and then click Run as administrator in the below of screen.
Type chkdsk /r /f, and press Enter.
For your information, please review the similar issue to get more help:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/how-can-i-use-easy-transfer-to-transfer-settings/36b9123a-4b6b-4117-9af6-515e44665188
Regards,
Lany Zhang

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

Are the songs playing whole in iTunes? if not download them again.
else read this Apple Support Article on your problem
Have a nice day!

Windows Easy Transfer can't transfer files from Windows Vista or Windows XP

I'm running a English Windows Vista Ultimate and just bought a
ENGLISH Windows 8.1. I've downloaded the WET for Windows vista and tried to complete the second portion of the transfer by specifying the saved .MIG file WET created. Then I got the error message: "Windows Easy Transfer can't transfer
files from Windows Vista or Windows XP".
The truth is, Microsoft was too busy integrating special effects to it's operating system and claimed it as fully polished instead of making sure built-in tools were worth using.
Another harsh reality is that THERE IS NO WAY TO TRANSFER a file from Windows Vista to Windows 8. That's because engineers didn't even bother to make that possibility happen. Just Google: "Transfer from windows vista to windows 8" and you'll see
there are no relevant Microsoft web page about this.
Worse, Microsoft is giving excuses. To solve this issues, they came with a toolbox of fake scenarios in order to confuse clients even further, while they know damn well the Windows Easy Transfer is NOT EASY and certainly in multiple cases
DOES NOT TRANSFER jack to begin with.

I somewhat agree with you.
Trying to transfer from 7 to 8.1 and although it looks like the "7" side of the equation is working, the "8" side isn't.
"7" is trying to connect to "8" but "8.1" is being just plain stupid.
Not even sure why the MIG file step is even necessary if all I want to do is transfer one file between two machines. Said file is really BIG, or i'd just use my network, and the "8.1" rig doesn't have a dvd reader...
Per the MIG step... my file again, is big... I'd need to "mig" this file just to send it? Can't even get to the step where I'd mig-it and if i did, how long would that take?
So this is what progress is all about... geez... gimmie a NULL MODEM CABLE !!!

If I upgrade to ios 7 right from my device (not itunes) will I loose my pictures, apps and info

If I upgrade to ios 7 right from my iphone (not through itunes) will my pictures, apps and other info get automatically erased?

It shouldn't, but you should update your iPhone's backup immediately beforehand.
And a good idea to import the photos/videos in the Camera Roll with your computer beforehand to be on the safe side.
http://support.apple.com/kb/ht4083

Windows Easy transfer , ERROR message when trying to copy settings to Win 8 PC

I have a new hp-TouchSmart Envy 23. It has 2TB drive.
I want to use Windows Easy Transfer to move all my settings and data from the Windows 7 machine to the new hp-TouchSmart (my older PC is hp desktop is model # m9177c and has Win 7 OS) .
I have used easy transfer many times and I am reasonably experienced user .
I just cannot transfer my settings and data to my new PC. I have therefore copies all my data to the hp-TouchSmart . However I need to use Windows easy transfer to move all my settings. I have a very large number of settings , macros and much else that would take a very large amount of time to re-type.
I get an ERROR message when I want to transfer my settings. It says I don’t have enough disk space. The file I want to transfer is only 10.5 GB (after I removed all my data). The new machine has 2TB and yet I keep getting this error.
I have tried every possible way of transferring the settings , including : external drive; flash drive; direct wire ; easy transfer cable etc. I keep getting the same ERR message .
I am sure Easy transfer must allow transfer from Win 7 to Win 8. BUT HOW?
PLEASE do help. I would really appreciate very much .
THANK YOU
Adam

This thread may be useful.
Windows Easy Transfer will transfer from one drive to the other to mirror the original drive. What I suspect is happening is that the program is grabbing the D drive (recovery partition on most systems) and trying to transfer it to the new system which should also have a D drive. If that is happening,t hen that error will be thrown.
Try using the advanced options and view the report to see what exactly is happening and triggering the message.
Let me know what happens.
The document in the thread is for a previous version of Windows, but you can search for Easy Transfer Reports from the Start screen in Windows 8.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since not enough hard drive space in my PC., How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since not enough hard drive space in my PC.

How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since my PC not enough hard drive space.

You'll have to delete sufficient GBs from your HD or transfer GBs to a second HD to free up sufficient space.
Also look at these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
 Cheers, Tom

Windows Easy Transfer from XP to 8.1 not working

I was too quick with my original answer and edited it. I think the info i provided is wrong.The tool that Chris linked specifically states it will do xp to windows 8.1.http://www.microsoft.com/windows/en-us/xp/transfer-your-data.aspx?ocid=XPEOS_O_WOL_NULL_NULLHere is a microsoft virtual academy link for moving from xp to 8.1https://www.microsoftvirtualacademy.com/en-us/training-courses/migrating-from-windows-xp-to-windows-...

So after the final working USB port finally dying on me, we've got a new desktop for a client. I discovered and downloaded the Windows Easy Transfer tool for Windows XP and, while it says it's for Windows 7, I found a post by someone at Microsoft saying it would work with Windows 8 as well. I've created the WET file on the XP machine and moved it over to the new machine, but when I attempt to use the WET tool to import the old files, I get an error message saying that WET can't transfer files from Vista or XP. Is this because it's 8.1 instead of 8? Does the .1 really makes that much of a difference?Any ideas on what to do from here? I'm kind of at a loss, and I really need to be able to move these files over.
This topic first appeared in the Spiceworks Community

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

I deleted unwanted photos from my iPhoto library, emptied iPhoto trash & Finder trash... this did not free up disk space. please help!

I deleted unwanted photos from my iPhoto library, emptied iPhoto trash & Finder trash... this did not free up disk space. please help!
I have a 15-inch MacBook Pro (Late 2011) with OS X Mavericks 10.9.5
Last week, my 500 GB Harddrive had 120 GB free space. I was feeling crumby and decided to make productive use of taking a day off to lounge around. I snuggled up with my laptop and dedicated hours to meticulously combing through my iPhoto Library. I had 13,000 pictures, and I got rid of those I didn't want. Having said "sayōnara" to about 6,500 pictures, I then emptied the iPhoto trash and the Finder trash. I took delight in the iconic paper crumpling sound of them vanishing into the digital void.
Everything seemed perfect: the photos I loved were still there, the photos I loathed were gone, both trashes were beautifully empty. Having thrown away all of those awful, boring, and unflattering images of poorly light lunches and selfies gone wrong, my iPhoto library was half the size as before! I felt renewed, a little lighter, somehow more free, and I expected my hard drive to be a bit different to.
I eagerly checked my storage stats. My heart sank to see that my 120 GB of free space, was still only 120 GB of free space. I restarted my MacBook; this did not help. I restarted it the next day; this also did not help. It's been 5 days and the hard drive still has 120 GB free space. This is not an emergency and it will probably be a good while before I clutter my laptop to the brim. Yet while I am glad I don't have to see cringeworthy pictures of my ex's unmentionables every time I'm showing off things I do want to remember, I'm still disappointed and now obsessed with solving this mystery.
What is going on? I don't see them, so where are they hiding? How do I get the free space I should have earned from throwing away 1,000's of photos?!

Thank you, Terence!
Yes, I only emptied the trash when it was really full, once I waited until the trash cans contained 2,600 photos and then I emptied them - Oooops! In the future, I'll keep in mind your suggestion of deleting less than 100 photos at a time.
I downloaded the iPhoto Library Manager and used it to rebuild my iPhoto. After a few hours of rebuilding, it generated a new copy of my iPhoto Library. This versions was nearly identical to the original (it was missing 5 photos and was therefore only 5 mb smaller). I guess my Library wasn't defective.
I checked my storage stats, and interestingly, using iPhoto Library Manager did help with the problem that developed after I re-indexed my hard drive. My hard drive is able to properly recognize data categories again, instead of listing almost everything as "Other". Understandably, my free disk space changed from 120 GB to about 60 GB, because my hard drive now contained a second copy of my iPhoto Library as well as iPhoto Library Manager. It seemed like all I needed to do was throw these away, but when I emptied the trash, my problem was not solved. My Hard drive now looked like this:
It appears to me that when I empty the trash, the things I throw away are just hanging around as backups instead of leaving! I went into System Preferences and turned of my time machine OFF. Now my hard drive looks likes this:
The back ups of the iPhoto files, and the program which I deleted, are still on my hard drive some where but now they are listed as "Other" instead of "Backups". Do you know where they might be and how I can delete them for good?

If I bring in photos from Iphoto, am I using more disk space on my hard drive. I dont want to duplicate my entire file. I have 26000 photos in I photo.

If I bring in photos from Iphoto, am I using more disk space on my hard drive. I dont want to duplicate my entire file. I have 26000 photos in I photo.

You have to duplicate the photos unless you want to use PSE as the external editor for iphoto. In iphoto, your photos are stored in a proprietary library, which should never be messed with by programs other than iphoto. Writing to the iphoto library from outside iphoto is the fastest way to corrupt it and lose all the pics it contains.
So you can either set PSE as your external editor and send the photos from within iphoto, or you must export the photos from iphoto to be able to use them outside that program.

Restoring bookmarks from Windows Easy Transfer

I need to restore my bookmarks from Windows Easy Tranfer.I saw the same question asked and answered but the answer didn't explain how to transfer the bookmarks manually. I did find a Firefox file and tried to import from the organize libraries drop down. It gave me the message "importing will replace current bookmarks are you sure...?" I told it to proceed but I don't see my bookmarks. What do I need to do to solve this?
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

It depends if you included the Mozilla directory in your transfer.
See http://www.kombitz.com/2009/04/18/how-to-use-windows-easy-transfer-to-transfer-firefox-and-thunderbird-profiles-on-windows-7/
To avoid confusion, I'll just point you the knowledge base article on how to back up and restore your Firefox info. :-)
See [[Backing up your information]]

Upgrade to Win 7 (64bit) from Vista 32 - Not enough H Disk space after running Windows easy transfer

Similar Messages

Maybe you are looking for