Upgraded from LabVIEW 8 to 2013 and now VI asks to find the installati​on package for Run-Time Engine 7.0
I recently installed LabVIEW 2013 on a computer (running Windows XP 32-bit). The machine also has LabVIEW 8 installed, which is what I was using prior to upgrading. I opened a VI that was created in LV8 and then saved it and all its subVIs in LV2013. Now when I open the VI in LV2013 and try to run it, a window pops up asking me to find the "lvruntimeeng.msi" installation package for LabVIEW Run-Time Engine 7.0. If I cancel that dialog box and the subsequent message stating that the installion files were not found, the VI appears (at least from intial inspection) to run normally.
I closed LabVIEW, downloaded Run-Time Engine 7.0 from the NI website, and tried to install it, but I received a message saying that it is already installed (as I had suspected). How can I determine what part of the VI and/or its subVIs is trying to make use of Run-Time Engine 7.0? Alternatively, how can I get LabVIEW to instead use the Run-Time Engine 2013 that was installed when I upgraded to LabVIEW 2013?
Solved!
Go to Solution.
Bob_Schor wrote:
Are you running your VI from a Project? If so, you can look at Dependencies and get an idea what "dependent" VIs you might have. There may be "something old" in your LabVIEW 8 code that has been superceded in 2013, but still "hangs around" -- if you can identify it, you can probably replace it with its "more modern" equivalent.
If you do not have the VI in a Project, you can simply open LabVIEW, create a new blank project, and add your top level VI to it. If all of your relevant VIs are in a single folder, add the entire folder. Now look in Dependencies.
BS
Yes I am running the VI from within a LV Project. After some more searching in the NI Knowledgebase I was able to fix the problem by using the following procedure:
1. Use the Measurement and Automation Explorer to uninstall Run-Time Engine 7.0
2. Restart the PC
3. Open the project, close the project choosing to "save all"
4. Restart the PC
5. Re-install Run-Time Engine 7.0 using a file downloaded from ni.com
6. Restart the PC
7. Open the project, close the project choosing to "save all"
8. Open the project and run the VI. No more messages about LabVIEW trying to find Run-Time Engine 7.0.
Similar Messages
-
I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.
I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac
-
I just upgraded my iMac to OS 10.8.5 from 10.6.8 and now I can not get the calendars on my Mac and my iPhone 4s (running iOS 8.3) to sync. I already tried replacing the calendars on the phone with those on my computer but nothing happened.
Set up iCloud
Set up iCloud (2) -
I upgraded from 4 to 5s and now I cannot retrieve my photos or contacts?
Did you restore the backup of your iPhone 4 to your 5s? That's how you transfer the settings, data and purchased media to your new phone. See http://support.apple.com/kb/HT2109.
-
Started to upgrade from Lion got interrupted and now it won't download
Started to upgrade from Lion got interrupted and now it won't download
Hello webejamn,
Thank you for the details of the issue you are experiencing when trying to download and install OS X Mavericks. It sounds like the download from the Mac App Store for OS X Mavericks was interrupted and didn't complete.
I recommend the following step when an Mac App Store download is interrupted:
If downloading an app is interrupted
Once an Internet connection is reestablished, your purchased downloads should automatically restart. The Mac App Store may alert you that there was an issue with the download and ask if you'd like to restart the download(s). Confirming will restart all pending downloads. For more information on this topic, see Mac App Store: How to resume interrupted downloads.
Note: The download time will vary according to the file's size and your Internet connection speed. Refer to this article about iTunes Store purchases for more information about download times for large files.
Troubleshooting the Mac App Store
http://support.apple.com/kb/ts3624
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I upgraded to ITunes 11 and now it no longer finds the track names in the Gracenote database? Does anyone know how to fix this?
Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method -
I rented a movie from the Itunes store and started watching it, but my computer jammed part way through, and now i can't find the movie to continue playing it, where can i find it?
Hi brett242424,
Welcome to the Support Communities!
The movie would be in your iTunes library, in the Movies application. However, if the rental period has expired, you may need to contact the iTunes Store Support about your situation:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy -
I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?
There is no fix. It simply means that the software is outdated. Adobe would need to release a newer non-PPC version that supports Lion. They may have done that already, I don't know.
-
Name: O
I just updated my iPhoto and now am asked to download the iPhoto Library Upgrader. I am asked for a password. I do not know it. How can I find it or reset it?
Are you asked for the password, when you run the installer for iPhoto Library upgrader?
Then the installer is asking you for the password of your administrator account. You need to authorize the installation. -
Just upgraded Yosemite and now I can't find the calculator? Where can i find it?
Just upgraded Yosemite and now I can't find the calculator? Where can I find it?
The icon for the calculator is especially poor, among the many poorly legible icons developed for Yosemite.
It's a gray box with an orange stripe on the right side. -
My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project. Does anyone know of a way to still export this project?
jkrijgsman wrote:
Does anyone have a good workaround for burning a DVD from an iMovie project now that iDVD is no longer around?
There's Toast.
http://www.roxio.com/enu/products/toast/titanium/
$79.99
Final Cut Pro X will also burn DVDs.
$299.99
How large is your movie? Is it possible that you could output it as a QuickTime file and then burn that as a data DVD? Is uploading to YouTube an option?
Matt -
I have purchased Lightroom 5 and had it installed but I had to replace my matchbook pro and now I can't find the activation key - is there a way I can get it emailed to me or how do I find it? Most other plugin's email out the activation key so you have a copy but I have seen no way to get it.
If you registered your Lightroom with Adobe after you installed it, you can log into your Adobe account and get your serial number from your account.
-
I saved an iMovie to DVD and now I can't find the original working files in iMovie Project library to make additional edits. What happened to the files? Thx!
Did you do the moving of the image file in the Finder or do you have a reference library as asked by Larry? In either case moving the files is a recipe for disaster as you've found out. You must either move the files back to their original locations or try to get those photos back into iPhoto as follows:
1 - Find the folder you moved the files into and COPY it to the Desktop.
2 - in iPhoto delete the photos that you're having the problems with as you normally would even though you can't see see them. Also delete all the photos that are in the folder you moved the other files into.
3 - drag the folder on the Desktop into iPhoto to import them as one event. If you get a duplicate warning I'd let it import the duplicate and use Duplicate Annihilator to find them so you can cull out the duplicate you don't want.
Other than that you might have to start over from scratch as follows:
Creating a new library while preserving the Events from the original library.
1 - Move the existing library folder to the desktop
2 - Open the library package like this.
3 - Launch iPhoto and, when asked, select the option to create a new library.
4 - Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
OT -
How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is “unable to find the original file?” I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.
Backup drive?
Subscribe to iTunes Match?
If neither of the above and you don't have the CD and can't find your tracks on the computer then they you're stuck. A file recovery utility will cost $100, plus another $100 for an external drive to which to resue the files, and may not even work. You can buy a lot of CDs for $200. -
Upgraded from HP support page and now it wont boot up
I have just just upgraded my Hp p6-2018 uk Desk-top computer with the firmware and bios .from HP support page .and now it wont boot up .wont sys restore and wont do a repair.HELP
Reload the BIOS default settings:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bph07110&lc=en&product=5155276&tmp_...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.
Maybe you are looking for
-
HP PSC 1400 Drivers for windows 7 Professional X64 (bit) problem
I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from
-
i don't know how update or download the app: MAC APP STORE. i have the app but every time i open, that closes. Plues the icon is a blank sheet of paper whit two pencils.. help!!
-
Saving pdf's so recipients can read it
I downloaded an application, filled it out, saved and sent it but the recipient could not open it. It opens correctly and filled out on my computer.
-
HT1338 Java is not updating in the update software menu?
Jave is not updating on my Mac Pro? I choose the update menu and the program that needs it is still not downloading? The same program is downloading fine on my IBM Desktop but not apple? Thanks, Dave
-
Hi. I've got Arch setup pretty nicely, just my timezone and so forth is set to US when i'm in the UK. I've done a little digging and can't really see how to change timezone/input locale. Any ideas?