Upgraded from panther to tiger, now have several problems...help??

Hey guys(and girls)
i recently upgraded my iBook G4 from panther to tiger and am having some problems...first off Airport only get 2 bars...if im lucky. my room is about a good 15 feet from the router, and we are using 802.11G. i put it right next to the router and same. 2 bars. also my other problem is that my iBook tries to open .BIN files in quick time and an error pops up because quick time doesnt support .BIN. any help would be appreciated

Hello Leesa2
If it is Connected then please try to register your device to Wireless provider .
KB00510 How to register a BlackBerry smartphone with the wireless network
Wait till a Registration messages comes in your message box.
After that  perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back.
From your BlackBerry Browser Go towww.blackberry.com/integrate  then try adding your email  account.Please try it and let us know.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

  • Why upgrade from Panther to Tiger on G4 iMac?

    I have two iMacs. I use a G5 recently upgraded from Panther to Leopard 10.5.5. My wife has a G4 with Panther 10.3.9.
    Now that I have Leopard I have a Tiger install license available.
    Are there good reasons to upgrade my wife's G4 to Tiger?
    She uses it heavily for e-mail, internet, and MS Word.
    She's networked to my G5 through Airport and we use printer sharing and file sharing.
    Her G4 works great, but I'm wondering about security issues.
    Comments?
    -Bob

    Correct me if I'm wrong but I think Apple is still releasing Security updates for Panther too, isn't it?
    I think some of the Panther software is starting to show its age limitations for Internet capabilities, and things like iTunes for all the new iPods, etc. On one hand if you're not actually having problems then my feeling is an old computer best runs software designed for it. On the other hand I am not sure you would lose any functionality if you did upgrade. I think most Panther applications run on Tiger, the system requirements are pretty similar. It's not like when you upgrade to Leopard that you suddenly lose Classic support and it requires (demands?) a faster processor. From my personal perspective upgrading to Leopard really makes a big difference in capabilities both ways and may even be a negative upgrade if you run old software the way I do. Upgrading from Panther to Tiger didn't have any downsides and had several upsides in terms of software is still being brought out for Tiger.
    [Mac OS X 10.4 Tiger system requirements|http://docs.info.apple.com/article.html?artnum=301341]
    [OS 10.3 Panther requirements|http://docs.info.apple.com/article.html?artnum=106163]

  • Having problems upgrading from Panther to Tiger

    Hi there!
    I'm new to this place, but very desperate to find answers. I have been trying to upgrade from panther to tiger for the past week and have gotten a mess. I have to restore my old panther system after a panic kernal while trying to install tiger. I have tried to upgrade, install and archive and erase and install tiger and the same keeps happening: after 30-30% installation of essentials, I get a "try installing again" message and immediately goes to a blank blue screen. I have to reboot from my eDisk on the external hd and re-install my old system. I've done EVERYTHING I can find on the web and in the install suggestions. Everything has been updated (firmware, sofware, etc.), I tired disconnecting external devices except the keyboard and the external dvd I need to install and still the same thing...over and over and over!
    So, now I'm down to the fact that I need to install CDs (internal) instead of DVD off the external drive. However, when I went and downloaded the form for the exchange the Tiger versions listed (MA453Z/A, MA454Z/A) do not coincide with the version I purchased (M96397/A). So I'm trying to figure out what this version is that I purchased and if it has anything to do with my big install mess!
    So, any ideas out there? Glad to hear your input!

    Call 1-800-MY-APPLE WRT media exchange program and the DVD version you have.

  • Upgrading from Panther to Tiger. Is it worth it?

    Hi there. I have been debating this in my head for quite some time. It is worth upgrading from Panther to Tiger? What are the benefits?
    Thanks,
    dave

    Hi dave!
    If you do decide to upgrade, Tiger is available for purchase at The Apple Store (US).
    Jaguar and Panther, are no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
    A Full Retail Version of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, (as cornelius mentioned) etc.
    Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
    Additional info in these links.
    Using OS X Install CDs/DVDs On Multiple Macs
    What's A Computer Specific Mac OS X Release
    Software Update, Upgrade: What's The Difference?
    Once Tiger 10.4.x is installed, you can use the PPC 10.4.8 Combo Update, to upgrade to the most up-to-date version.
    Tiger System Requirements
    Mac Model Compatibility & Requirements For OS X
    Additionally,
    "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
    Download The Order Form Here. Media Exchange Program
    Shop Carefully, Examine All Documentation, And Good Luck!
    ali b

  • Be carefull when upgrading from Panther to Tiger

    If you choose to upgrade from Panther to Tiger by using the Erase and install option on the Tiger DVD install disk, your XServe RAID won't mount. The problem seems to be that the driver for the RAID won't be updated in the process.
    The solution for me was (by advice of Apple Support) to reinstall Panther. My RAID came up fine and I then did a upgrade to Tiger using the update and install.

    Mattur:When I restart to install the OS, it goes into a Kernel Panic and tells me to restart.I take it to mean that you mean you put the install disk and open it and at the prompt you restart, and it goes into the kernel panic. I notice too that you sayI can reinstall Panther with the disk the computer came with , but I can't install Tiger..In other words there is a problem is with the Tiger disk.
    Are you using a Full Retail Version of Tiger? Computer specific versions or update versions will not work.
    If you are planning to install Tiger check out System Requirements to be sure your computer complies.
    Good luck.
    cornelius

  • G5 killed by mail when upgrading from Panther to Tiger...HELP!

    Hello,
    I just upgraded one of our G5s from Panther to Tiger. When I opened mail, it began "importing" all the messages (I assume because of the update to mail.app). Now, the user who's computer I upgraded contained 9GB of mail (!!!) but the G5 had more than enough space for this. When the "importing" completes, mail.app is open and all folders/subfolders, etc. are there, but the program doesn't contain any of the messages from the import. Every folder/subfolder is empty, the inbox is empty, etc. AND, to top it off, the HD of the G5 now has zero free space (while, when before the import, it had at least 40GB of free space). Does anyone know a fix for this? Has this happened before?
    Regards,
    Kristin.

    OPEN LETTER TO THE MAIL 2.0 CODING TEAM. RSVP.
    with thanks to DAVID GIMENO GOST, for answering so many people's posts about all the mail 2.0 bugs.
    hi guys,
    i love all things apple, and i have done for twenty years.
    but with respect, your build of mail 2.0 really could be a lot better.
    moving my mail from 1.0 on an ibook g3 running os X 10.3.9, over to mail 2.0 on an intel macbook 1.83 running os X 10.4.7 has been a nightmare.
    the discussion boards of many mac sites feature countless cases of people making the move from 1.0 to 2.0, with all their e-mails disappearing.
    having spent two weeks reading the knowledge forums, and learning about emailchemy, plus all the complications which, even with that third party program, still exist in moving one's mail over from version 1.0 over to 2.0, are both massive and horrendous.
    and that's for me, who has twenty years of finding my way around mac bugs.
    but this one is the most difficult i've ever seen, as well as being one of the most widespread problems in a FULL VERSION RELEASE of an apple program, which apple has done nothing to resolve during the six months in which this problem has been widespread in the mac community worldwide.
    so thank god for DAVID GIMENO GOST !
    i'm amazed that apple still hasn't come up with a patch for moving mail from 1.0 to 2.0.
    even now, while i've finally got all my mail back today, 95% is showing as unread, due to the last obstacles in the process, which i can no longer face solving.
    i've also lost hundreds of red mail flags during the transfer :o(.
    PLEASE PLEASE PLEASE, guys:
    we shouldn't need to be buying third party software to move our e-mails from apple mail 1.0 up to apple mail 2.0, and even then be faced by massive hurdles to overcome, which take weeks for someone who at least has SOME idea of what he's doing.
    i pity all the people who read the numerous forum posts about how difficult it is to transfer their mail from 1.0 to 2.0, and simply give up on the spot, and have to start their e-mail history TODAY, unable to access their previous e-mail again - potentially now for ever.
    because the ironic joke is that we can't even have an access copy of mail 1.0 on our macs to read our old e-mails, unless we hack that program out of the 10.3 cd installation set, which the gurus on your own web site recommend us NOT to do !
    so what are we supposed to do, to access our old e-mail, which we can't open, even though YES, it is in our mail folder, and YES, we did full rebuilds of every mail folder, and YES, we trashed our mail preferences first.
    e-mail is now at the very center of the average mac user's digital life.
    a user's most important program should not require countless hours scrolling through the astonishing number of problems within mail 2.0, which the apple.com discussion boards evidence, with new problems being added every day.
    please sort this out, and build a patch, for the sanity of the many people who love apple, but who are unable to access any of their old e-mails.
    because i wouldn't wish the last fortnight on anyone else.
    RSVP, APPLE.
    with best wishes to everyone on the infinity loop,
    michael thorne
    london, england
    [email protected]
    ps: if you're a mac user who has been affected by the mail 2.0 disappearing bug, please post a reply to this message, and send me an e-mail to: [email protected], so that we can draw apple's increasing attention to it. thanks.
    MacBook1. 1.83 GHz. 512 MB.   Mac OS X (10.4.7)  

  • IBook G3, thinking about upgrading from panther to tiger?

    Hello all
    This is my first apple computer that I've owned, it's my mom's hand me down after she got herself a spanking new macbook pro but it actually runs decently fine, iBook G3 500Mhz, 40gb HD, 640mb memory
    It currently runs a clean copy of panther 10.3.9, but with some effort, I think I could get my hands on tiger as well. However, before I do, would it be worth it to try to upgrade it on this laptop? I think panther runs fine, but I hear for each successive mac osx, it's been running faster, so in that case, I'd try to get it, but if I happen to find that it's about the same or worse, then maybe not worth the effort. I definitely like to be up to date with my software and such, so it would be nice if people with ibook G3's with specs similar to mine could tell me their experience going from panther to tiger.
    Thanks in advance

    Welcome To  Discussions daonesteven!
    Here are images of the Full Retail Version, of the Tiger Install DVD, referred to by cornelius, that must be used.
    If you know what to look for, those install discs, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, FastMac, etc.
    The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
    As the Tiger Media Exchange Program is no longer being offered, if the iBook doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
    Info here Installing Tiger without a DVD drive.
    Once Tiger 10.4.x is installed, you can use the PPC 10.4.10 Combo Update, to upgrade to the current version.
    And additional RAM may speed the iBook up.
    Shop Carefully, Examine All Documentation, And I Wish You Success!
    ali b

  • Using Mailboxes on my computer when upgrading from Panther to Tiger

    I'm getting ready to upgrade from 10.3.9 to 10.4 and want to avoid all the issues with Mail that I have been reading about. In the README on the installation disk it says:
    "Using POP email accounts and On My Mac mailboxes in Tiger and Panther...
    If you have a shared home folder and you access a POP email account using Mail in both Mac OS X Panther and Mac OS X Tiger, you will not see messages that you retrieve in one version when you switch to the other.
    You will not see messages saved in a mailbox on your computer when you switch from one version to another. To avoid this problem, use separate home folders for each version of Mac OS X.
    Your IMAP account will synchronize automatically when you switch between Mail in Tiger and Panther."
    The question is – I am using an IMAP account and do not store my mesages on the server, but on my Mac. Obviously I want to be able to access all my old mail when I upgrade. How do I go about using separate Home Folders? And will doing this still enable me to access all my mail without switching back and forth between the 2 OS's?
    Thanks
    PB G4   Mac OS X (10.3.2)  
    PB G4   Mac OS X (10.3.2)  

    If you install Tiger over Panther on the same partition, you will not have separate Home folders/directories.
    I've been using the Mail.app exclusively since Jaguar was introduced, thru Panther and now Tiger. I installed Tiger over Panther via an Archive & Install selecting preserve user and network settings without experiencing any problems with my Mail.app data or with anything else but I backed up my data beforehand just in case which is a good idea regardless. I used SuperDuper! to create a bootable clone of my hard drive with Panther installed saved to a Firewire drive before installing Tiger.
    Most of the problems reported here with Mail.app data after upgrading to Tiger are from existing/underlying problems with Panther mbox files.
    Before upgrading to Tiger, I didn't allow any mailbox to exceed 500MB or so in size and I used the Rebuild Mailbox function on the most active mailboxes on a regular basis. I used the Rebuild Mailbox function on all Panther Mail.app mailboxes before upgrading to Tiger. If you do this, you should be fine but a backup of the entire Mail folder at Home > Library > Mail is your insurance in case something goes wrong with the mbox conversion process to Tiger Mail with one or several mailboxes stored locally on the hard drive.
    Be sure to check the hard drive for any directory problems with Disk First Aid repair via Disk Utility when booted from the Tiger retail install disc before proceeding with the installation. If any problems are reported and successfully repaired, run repair again until no problems are reported. Afterwards, it won't hurt to repair disk permissions from the same location.
    Do this along with having a backup of all important data for insurance and you should be fine.

  • Upgrading from Panther to Tiger -- Need some hand holding

    Hello all,
    So I'm a newbie to upgrading operating systems on the Mac but need to upgrade to Tiger in order to install Final Cut Studio 5 so I can use my new HD camera. I will upgrade to Leopard when it comes out, but I need to be able to edit my videocamera's footage now.
    So...I've read so many horror stories I wanted to post about my system and some of my most used applications and see if anyone sees any potential problems, as far as compatibility OR not working once the upgrade is complete..
    I have a 1.8 Dual G5, 2 gigs RAM, running Panther 10.3.9
    I use these applications FREQUENTLY and want to make sure they still work after doing a simple upgrade:
    Adobe Creative Suite (not 2, but the one before that)
    Dreamweaver 8
    Final Cut HD 4.5 (will I be able to open old projects with the new FCP 5, otherwise I won't need this afterwards)
    DVD Studio Pro 3 (will I be able to open old projects with the new DVD Studio Pro 4 otherwise I won't need this afterwards)
    iLife '06 (this won't be overwritten, correct?)
    iWork
    Quickbooks (that came with my original system...will it stay too?)
    Microsoft Office X for Mac (using Entourage as my mail program)
    Virtual PC for Mac
    Classic OS 9 (I've read I should remove this before I upgrade? I never use it)
    I think that's the important stuff. Some people tell me they've upgraded with no problems but I guess I read these boards too much to be that confident.
    I've backed up my Docs, iTunes, iPhoto...anything else in my Library or something else you recommend I backup?
    Do I choose Archive and Install for a Simple Upgrade or will it just say "Simple Upgrade" and not prompt me further?
    Sorry if these are dumb questions...I'm just nervous I will have a big paperweight on my desk after this and I have mucho work to do right now!
    Thanks everyone!
    Mare

    Here are some suggestions:
    Important: Please read before installing
    1. If you have a third-party FireWire hard drive connected, disconnect it before installing this update. Reconnect it and turn it back on after installation is complete and you've restarted.
    2. You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    3. The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.
    System Update Procedure
    A. Repair hard drive and permissions.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
    B. Clone your existing system to an external Firewire drive.
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the startup or source volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Drag the startup or source volume to the Source entry field.
    5. Select the backup or destination volume from the leftside list and drag it to the Destination entry field.
    6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
    7. Double-check you got it right, then click on the Restore button.
    C. Consult the Tiger Installation Checklist.
    You have three upgrade options. If you use the Upgrade installation option be sure you have repaired the hard drive and permissions first and made your backup. If you choose the Archive and Install option then you only need to repair the hard drive.
    Neither of the above options will erase the disk. Some of your software may not work with Tiger. You will need to upgrade those programs. It would be best to do the upgrades to your software before upgrading to Tiger.
    You don't have to remove your OS 9 installation for Classic. However, if you don't use it you can recover the disk space by deleting it from the drive. The OS 9 folders are located at the root directory of the hard drive and are:
    +System Folder+ (Note this is NOT the System folder.)
    +Applications (Mac OS 9)+
    Documentation
    Be sure Classic is not activated (System Preferences.) Simply open the System Folder and drag the System file into the Trash. Restart the computer. After the computer restarts empty the Trash then drag the three OS 9 folders to the Trash and empty.

  • Upgrading from panther to tiger problems

    Hi i recently purchased Tiger discs from ebay to upgrade my panther system. As most applications now need 10.4 or about (including the new ipods which i have just found out after buying one). Now I have a g4 1.67 ghz powerbook and when i boot it with the install disc in it i get a kernel panic about how the disc has been formatted only for macbook and cannot be used on a power book. I wish i knew this before i bought the discs.. i plan on upgrading to leopard soon anyway but for now, is there anyway around my problem with the macbook install discs and trying to install them on an older power book?
    cheers

    No. They will not work ever. MacBooks have a totally different architecture. You bought what is called a machine specific disk; meant to install on only the model it shipped with. It came with a MacBook and will only install on that exact model.
    See if you can send it back. E-Bay has alot of machine specific disks for sale. That is why most of us here don't recomend buying OS software on E-Bay.
    The Retail disk is black in color. PriceGrabber.com lists one for sale for at Amazon.com.
    Cheers! DALE

  • Fast User Switching Hangs Computer Following Upgrade from Panther to Tiger

    Upgraded my computer (G3 B&W) to Tiger from Panther, and now Fast User Switching doesn't work. Have a family of 5 that shares this computer. Each new user can log in, but when you try to switch back to an open account, the computer hangs. It worked fine in Panther. May be just due to the fact that this is an older Mac - if so, my second question is whether there's a good way to get back to Panther? It worked great on this Mac, and Tiger is noticeably slower. Any ideas would be greatly appreciated - Thanks!

    Thanks for the link, baltwo!
    This got me some good info on how mail messages are stored in Tiger, but unfortunately, I still can't find the missing messages, which were in the inbox in 10.3, but didn't show up following the 10,4 upgrade. I found the inbox folder, and it only seems to have the current files, can't track down any evidence of the missing files.
    Thanks again for the reply - very much appreciated.

  • Upgrade from panther to tiger

    hi,
    i have MacOS 10.3.9 installed on my dual 2GHz, Power PC G5 [512 MB DDR SDRAM].
    The operating will not upgrade automatically from web.
    i would like to upgrade to panther.
    do i need a software disc to do this?
    if so does it matter which version of panther i upgrade to?
    do i have to upgrade to 10.4.1 first?
    thanks!!!

    You need to buy a retail Tiger disc. They are either 10.4.0 or 10.4.6, but either will work. Software update can then bring it up to 10.4.10 in one step.

  • Missing messages after upgrading from Panther to Tiger

    I have just upgraded from 10.3.9 to 10.4.11 and find that the new Mail app has imported all my old messages from one account in full but has only imported a small selection of the latest emails in my other two accounts and these have no text in them. In the Mail folder in the Library I can see two files called mbox which are of the right size (about 350mB each) to hold the missing messagesl but they cannot be read. The Inbox for the account which is working also contains a folder called Messages containing separate files for each email with the suffix .emlx
    How can I get my other two accounts to be the same? I have tried 'Import' from OS X Mail app. but this says it cannot see any files to import.
    Edward Mason

    The conversion from Mail 1.x to Mail 2.x is broken. Mail 2.x is often simply unable to import mailboxes that worked fine in Mail 1.x. Apple hasn’t bothered to fix the incredibly weak Mail 2.x import capabilities in all this time.
    The following procedure is meant to fix the incomplete conversion of a POP account’s Inbox. A similar procedure should allow you to fix other mailboxes that might also be affected:
    1. Quit Mail if it’s running.
    2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
    3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
    4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
    5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
    6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
    7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
    The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
    8. Open Mail.
    9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
    10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
    As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
    Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
    If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
    Take a look at the following article to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
    Overstuffed mailbox is unexpectedly empty
    Ask for any clarifications or if you need further assistance.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

  • Upgraded from Panther to Tiger. Mail import stalls.

    I just upgraded from 10.3.9 to 10.4.9 and in the process, Mail.app was updated (as expected). When I launch Mail.app, it starts importing my fifty-seven thousand old emails. It stops on message 3991 and never continues. I sits there forever, perpetually increasing the estimated time to completion. I haven't been able to check my mail since upgrading over the Memorial Day weekend.
    I'd like to follow Ernie Stamper's instructions at http://discussions.apple.com/message.jspa?messageID=2529207#2529207 but I do have several .imapmbox directories and the instructions for converting those were never posted.
    I have a tar archive of my old Mail directory and my old Preferences directory, so no data has been lost yet.
    I have several mail accounts, some of which no longer exist on any server, but I still have the messages stored locally. I have messages in all of my inboxes, but I do try to trim them down from time to time by moving them to dated "On My Mac" subfolders. I've got a lot of messages in my trash that can be lost if necessary. The same goes for my old Junk mail.
    I have never had any mail plugins installed, so the instructions in the kb article "Mac OS X 10.4: Mail unexpectedly quits, stops responding, or won't import previous mailboxes" were useless to me.
    I'm very comfortable at the command line, so if anyone has any suggestions that require some shell hackery, don't hesitate to post them.
    15" AlBook   Mac OS X (10.4.9)  

    The conversion from Mail 1.x to Mail 2.x is broken. Here’s an example of the most common variant of this problem and how to proceed in those cases:
    Just upgraded, Most of my old Inbox is gone!
    Your problem, however, is different in that you don’t even get an incomplete conversion. If Mail stalls during the conversion process, you may try to identify the mailboxes that Mail is choking on, quit Mail, move those mailboxes out of ~/Library/Mail/ (e.g. to the Destkop), and trash any Envelope Index-named files you may see in ~/Library/Mail/, so that Mail re-creates the index and tries to import the remaining mailboxes again, then manually import the problematic mailboxes as Other.
    Alternatively, you may want to set up Mail from scratch and manually import your mail back afterwards. This would allow you to use Mail normally while solving the problem of importing the old mail as you see fit:
    1. Quit Mail if it’s running.
    2. In the Finder, go to ~/Library/. Move (not copy) the entire Mail folder out of there, to the Desktop.
    3. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop.
    4. Open Mail and set it up again from scratch. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and check that everything works fine.
    5. You’ll have to re-configure all your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
    6. Do File > Import Mailboxes and follow the instructions to import your mail from the old Mail folder that’s now on the Desktop. Import the Mailboxes folder first, then each of the POP-username@mailserver account folders, if any.
    There are two ways to import Mail 1.x mailboxes into Mail 2.x. The obvious one is importing them as Mail for Mac OS X. But Mail 1.x stored mail in standard mbox format plus some additional support files, and this allows Mail 1.x mailboxes to also be imported as Other, i.e. as generic mailboxes in standard mbox format.
    Importing as Mail for Mac OS X produces the best results when it works, because it takes into consideration all the files in the mailboxes, not just the mbox files where the messages are stored, and hence, allows information such as status flags to be preserved. Importing as Other, on the other hand, may work in cases where importing as Mail for Mac OS X doesn’t, because it looks at the mbox files only, ignoring the support files which is what Mail 2.x usually chokes on, but precisely because of that, information such as status flags is lost and previously deleted messages may reappear.
    Hence, you may try importing as much as you can as Mail for Mac OS X, then import the problematic mailboxes as Other.
    Note that what Mail asks for when importing depends on the format chosen. Mail always asks for the folder that contains the “things” to be imported. If Mail for Mac OS X is chosen as the data format, the “things” to be imported are the *.mbox folders, so you must choose the folder that contains them, not the *.mbox folders themselves. On the other hand, if Other is chosen as the data format, the “things” to be imported are the mbox files, so you must choose the *.mbox folders that contain them in that case.
    Note also that some of the mailboxes now on the Desktop may have already been partially converted to the new *.emlx format during the previous (failed) attempt to convert them in place. If you tell Mail 2.x to import as Mail for Mac OS X a mailbox that already has a Messages folder, Mail will simply ignore the Mail 1.x files present there. If the mailbox was successfully converted to the new format, that’s fine, but if the conversion was incomplete, that’s not what you want.
    As a result of doing all the above, some messages may be duplicated. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
    If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

  • How can I completely remove my FF 4.0.1 from my system. Ever since I upgraded from 3.? I have had problems with FF. I use XP Pro service pack3.

    I have performed all the TS methods suggested. All I want is to purge all of FF from my system. I have purged profiles, and others as recommended during TS. It doesn't matter if all plugins are disabled or not.I want a very clean system of FF (registry included)
    I will then try to reinstall FF 4.0.1 to see if it works as designed.
    IE works fine,but I prefer FF.

    It is not a good idea, to manually delete registry keys. Java uninstaller removes all registry entries that are needed to perform clean future installation.
    You might see some of the keys not removed by Java unistaller but they do not prevent any user from doing fresh installation of Java in future.
    Java removal tool is currently being developed, but that is for removing old/unsecure and unsupported Java versions. The tool isn't really intended to remove current/above security baseline versions of Java.
    Also, the tool does a standard un-install using msiexec /x. It won't specifically delete registry keys - it lets msiexec do it.

Maybe you are looking for