Upgraded my mac to yosemite, currently have photoshop elements 12, it wont work with yosemite. is there a free upgrade to make 12 work with yosemite version 10.10
recently upgraded to mac OS10 yosemite version 10.10
my photoshop elements 12 is not working with this os
is there an upgrade so elements 12 will work?
Photoshop elements 12 should work on mac os x 10.10
Have you updated to 10.10.1
Also, if you upgraded with pse 12 already installed, it's a must that you do the steps shown on the following page:
http://barbarabrundage.com/2014/10/17/a-reminder-for-mac-folks-upgrading-to-yosemite/
Also, see this:
http://feedback.photoshop.com/photoshop_family/topics/photoshop-elements-hangs-in-yosemite
Similar Messages
-
I currently have Photoshop Elements 7 on my Personal Computer.
I would like to buy Photoshop Elements 13 for my laptop. Would version 13 work without version 7 on my laptop? Or do I first need to install version 7 on my laptop?Yes you can directly use the upgrade version.
You can visit this page Photoshop Elements (PSE) knowledge base. for further assistance.
Regards
Kishan -
I currently have Photoshop elements 10 on my computer. I recently purchased PS elements/premiere 12. Can I load 12 over 10 or do I have to uninstall 10 before loading 12?
Both are separate programs. You can have both 10 and 12 installed at the same time.
-
I have Photoshop elements 2.0 on my old computer. How can I upgrade it in my new computer?
I have Photoshop elements 2.0 on my old computer. How can I upgrade it in my new computer?
Suggest that you buy PSE v.12.
Shop around - good buys this time of the year. -
I currently have Photoshop Elements 9 and want to change to Photoshop Elements 12
I need to understand how ver. 9 converts to ver. 12, how does the organizer, specifically I want to understand file structure, folders & tagging
Thank you, I has PSE9 on my old computer, I now have a new computer and
still have my original disk. Can I re-install PSE9 even though Adobe does
not support that version? From what I have seen of PSE12 I don't think
that is the version for me, it is more than I need. I simply want to scan
my photos to directories and run short slide shows from that. Is it
possible that you could call me or I call you? I find it difficult to read
through manuals, I understand much better by asking some questions. I will
be out for a couple of hours but my phone number is 250 768-6620. Gladys
On Thu, Jul 10, 2014 at 7:53 AM, Barbara B. <[email protected]> -
Currently using Photoshop Elements 9 with 98,000 pix. Can I restore catalog to another PC?
I am currently using Photoshop Elements 9 on one PC and would like to transfer my catalog to another PC with is faster and more powerful PC? For example, could I install Photoshop Elements 10 on the faster PC and then import the Catalog Backup from Elements 9? Currently us Microsoft PCs, if that makes any difference?
Thanks,
Leon
Message was edited by: Leon Sr.photodrawken wrote:
First of all, use PSE9 on your old computer to make a full backup of your catalog and image files. Put this backup in a safe location, such as an external HDD, and don't mess with it. If something goes wrong, you'll need to restore your catalog from this backup to get back to where you started from. Let's call this backup "PSE9 Backup Golden".
Now the question becomes "Can PSE10 restore from a version 9 backup?". I don't know, so you have 3 options:
1. The "I feel lucky" option.
Use PSE9 on your old computer to make a new, full backup onto an external HDD. (Call this backup "PSE9 Backup New".)
Install PSE10 on your new computer.
Use the PSE10 Organizer to restore that "PSE9 Backup New" to your new computer, answering "Yes" to any prompt about converting the catalog to the new version.
2.
Use PSE9 on your old computer to make a new, full backup onto an external HDD. (Call this backup "PSE9 Backup New".)
Install PSE9 on your new computer.
Install PSE10 on you new computer.
Use PSE9 on your new computer to restore "PSE9 Backup New" to your new computer.
Open the restored PSE9 catalog in PSE10 and say "Yes" to the prompt about converting it to the new version.
3.
Install PSE10 on your old computer.
Open the PSE9 catalog in PSE10 and say "Yes" to the prompt about converting it to the new version.
Use PSE10 to backup the converted catalog to an external HDD.
Install PSE10 on your new computer.
Use PSE10 on your new computer to restore that converted catalog to your new computer.
Ken
I have tested the first solution without any problem with different PSE6 catalogs, one of which with 32 000 pictures. -
I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this? It keeps telling me that there are missing files, too. If I upgrade to Elements 12 or beyond, will this fix the problem?
You can't sign in because there is nothing to sign in to. For PSE 10 the only sign in was to photoshop.com, which has been dead and gone for a year and half. Just skip the sign in. Reinstalling will not change this.
PSE 8, 9, 10 Can’t Sign In, Error 404 | Barbara's Sort-of-Tech Blog
PSE is locking up because it's looking interminably for the non-existent photoshop.com server. -
I currently have Photoshop CS5 standard, and want to upgrade to CS5 Extended to get the 3D capabilities. Is this possible, I don't see any CS5 upgrades available? I tried to download a new trial version as well, but my current operating system will not support it, so I'd like to stick w/ a version of CS5 that will allow me to work in 3D. What are my options?
You can upgrade to CS6 extended for $400
-
I currently have Photoshop CS5.1 on my Mac and want to transfer it to my newly purchased Mac Book Air. How can I do that?
Just install it like you did the first time (do not try to transfer it from the old machine in any way) - you can download thru your account if you purchased it as a download originally - otherwise there is a link for downloading below. Your serial number should be available thru your Adobe account online if your registered the software previously.
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
If you like you can leave it on the first machine as a backup because you are allowed to have two activated installations. If you wish to remove it from the older machine you should deactivate it first (open an application and choose Help -> Deactivate). -
I have photoshop elements 10 for PC is possible to convert the license for MAC?
I have photoshop elements 10 for PC is possible to convert the license for MAC?
Good evening I do not have disc version, I by in Internet and attached I send the license number can I use?
I have downloaded the version 10 but when I insert the license number the program say that is wrong.
May I resolve the problem??
byby
Thanks
Leandro Duranti
[email protected]
Il giorno 08/feb/2015, alle ore 01:15, Barbara B. <[email protected]> ha scritto:
I have photoshop elements 10 for PC is possible to convert the license for MAC?
created by Barbara B. <https://forums.adobe.com/people/Barbara+B.> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/7173380#7173380>
That depends. If you bought the disc version, you're good to go, since your serial number works on both platforms, so just install the mac version. If you lost the discs or your mac doesn't have a disc drive, you can download it here:
Download Photoshop Elements products | 13, 12, 11, 10 <https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html>
However, if you bought the windows version as a download, you're out of luck. Adobe does do a crossgrade, but for older versions you have to pay to upgrade to current version on the new platform, and that's more expensive than just buying it, if you search around for a good price.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7173380#7173380 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7173380#7173380
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email <mailto:[email protected]ware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 47>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>. -
I have Photoshop Elements 10 - how do I upgrade to 11
I have Photoshop Elements 10 - how do I upgrade to 11. I tired downloading 11 but got an error message.
You would have to upgrade to the current version 12 by purchasing it. Adobe doesn't sell older versions of their software, so if you want to by an upgrade to version 11 you would have to look for some third party vendor which you are less likely to find for an upgrade purchase - and purchasing from a 3rd party vendor can be chancy.
-
I have Photoshop Elements 10 on a Mac. Adobe offered me an update to version 13. So I ordered. And every download option is Windows which is worthless to me. So unless i get a quick solution to convert to a Mac upgrade, i will cancel the purchase via credit card.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
-
Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?Camera Raw plug-in | Supported cameras
-
I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.
How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality. -
I have an iMac purchased new about 5 years ago with OS 10.4.11. I would like to upgrade to Lion. I currently have a 2.33 GHz Intel Core 2 Duo processor with 2 GB of ram. Can I upgrade to Lion, and what is the best way to do so?
From what I read here:
http://www.tuaw.com/2011/06/06/lion-...u-2-gb-of-ram/
s long as they already have Snow Leopard 10.6.8 installed in it.All a person needs to do with that type of iMac is to upgrade/max out their Ram. They claim that an Interl iMac with Core 2 Duo is all that is needed, as long as it has OS 10.6.8 installed. They say you don`t need the "Core i3, Core i5, Core i7, or Xeon processor"
But I wonder about the RAM speed, the iMac 2.33Ghz uses DDR2 SDRAM, which I believe is rated at 667Mhz. Lion maybe installed but it might be problems running smoothly or not?
Did some quick checking and the iMacs apple is selling this year use 1333MHz DDR3 SDRAM.
The only thing to do is to make sure you have a good back-up, Install your RAM and install Snow Leo, then wait a couple of hours and install Lion.
Good Luck
Maybe you are looking for
-
I_oi_document_proxy - open_document_from_table
Hello everybody, I would like to show an intern table from ABAP in Excel and afetr change save data in table. I try to use the method i_oi_document_proxy ->open_document_from_table but it not woks correct. The data are not correct in columns and rows
-
is there a way to address email (i.e. a word or some code) that would place that email in a specified inbox folder? not using internal rule, rather the beginning of this sort happening as it comes in? In other words I tell a friend if he is emailing
-
Ladies/Gentlemen, I have my Logo in a EPS Format and I am trying to keep the Transperancy. I tried exporting out of Photoshop and Illustrater as a Tiff file with no success. I also tried Jpeg , but ofcourse I get a white background. Can anyone let me
-
Hi. I just wanted to update my 3 apps PS, Brigde and Indesign. After doing that I wasn't abble to open Brigde??? PS and Indesign works fine. Further more the Application Manager does not seem to register the updates I have made on Indesign and PS. Ev
-
Can I go back to an earlier version of an App?
Hi All I keep backups of my iTunes Mobile Applications. If I download an update to a particular app and then find that the update is 'buggy', is it possible for me to just replace the buggy version, in Mobile Applications, with a good previous versio