Upgraded service to next tier (50/20) - How long does it take?

Last night I upgraded to the fastest tier for internet (50/50) and I'm seeing on the order status page it won't be processed until next week? Why does it take so long?
If anyone from Verizon sees this and can push the changes through immediately it would be very much appreciated. Otherwise I may cancel the order.
Thank you,
mrebich

OMG lol, I just answered this question. And I wish Verizon had 50mbits upload
Anyway, if an employee sees this post, they'll cap you to 50/20 immediatley.

Similar Messages

Sent an upgrade back that I didn't want. HOw long does it take for the upgrade date to reset?

It has been almost a week since return and my upgrade date has not adjusted.. How long does this take?
Thanks for all your help.

I am sorry to hear you sent back your upgrade thefrankster58! I have sent you a direct message so I can look into this for you.
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Upgrade services through My Verizon...how long until programming shows up??

I just signed up with Triple Play and went with the Prime package. I decided to add the Extreme package since I'm still saving money on the triple play and there are a few more channels in that package that I'd like to have. Anyway, I did it last night through the My Verizon portal on the website and the new channels are not showing up on any of my boxes. I have a 7232 Whole Home DVR and the standard HD box which is the 7100. How long does it take? I figured it would be instant.

Usually within the day. Note extreme also loses a few channels so I hope You checked out the channel list to make sure you kept all you want.

"How long does it take to do a dist-upgrade on your distro?"

Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
The Computer
Dell OptiPlex GX110
[jada@arch-02 ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 797.452
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
bogomips : 1596.45
clflush size : 32
[jada@arch-02 ~]$
I used the following command for the update
$ time pacman -Syu
The Test
first update pacman
[root@arch-02 jada]# pacman -Syu
warning: current locale is invalid; using default "C" locale
:: Synchronizing package databases...
core 23.8K 80.0K/s 00:00:00 [#####################] 100%
extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
community 341.0K 295.8K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
:: pacman has detected a newer version of the "pacman" package.
:: It is recommended that you allow pacman to upgrade itself
:: first, then you can re-run the operation with the newer version.
:: Upgrade pacman first? [Y/n] y
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
Total Package Size: 1.19 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
checking package integrity... done.
cleaning up... done.
(3/3) checking for file conflicts [#####################] 100%
(1/3) upgrading libarchive [#####################] 100%
(2/3) upgrading libdownload [#####################] 100%
(3/3) upgrading pacman [#####################] 100%
>>> The makepkg.conf syntax has changed, please note the new format
>>> when merging the pacnew file with your old configuration.
>>>
>>> The pacman.conf default file has changed. Please update your
>>> config to use the single mirrorlist, and any additional files
>>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
>>>
>>> The location of sync DBs has moved from /var/lib/pacman/ to
>>> /var/lib/pacman/sync/ for several reasons. To delete older
>>> DBs, please run pacman -Sc and follow the instructions.
>>> You will also have to run pacman -Sy to refresh the sync DBs.
>>>
>>> abs is no longer included; please install the 'abs' package
>>> to use abs. You may need to edit abs.conf to re-enable repos.
[root@arch-02 jada]#
restart pacman 3.1.1 and update the packages
[root@arch-02 jada]# time pacman -Syu
:: Synchronizing package databases...
core 23.8K 80.3K/s 00:00:00 [#####################] 100%
extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
community 341.0K 302.5K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
resolving dependencies...
warning: dependency cycle detected:
warning: bash will be installed before its glibc dependency
warning: dependency cycle detected:
warning: readline will be installed before its glibc dependency
warning: dependency cycle detected:
warning: ncurses will be installed before its glibc dependency
warning: dependency cycle detected:
warning: db will be installed before its coreutils dependency
looking for inter-conflicts...
Remove: mktemp mpg321
Total Removed Size: 0.08 MB
Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
nautilus-2.20.0-4 gnome-control-center-2.20.3-1
gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
zenity-2.20.1-1
Total Download Size: 743.90 MB
Total Installed Size: 748.87 MB
Proceed with installation? [Y/n]
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
:: Retrieving packages from community...
freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
checking package integrity...
(349/349) checking for file conflicts [#####################] 100%
( 1/349) upgrading ncurses [#####################] 100%
( 2/349) upgrading readline [#####################] 100%
( 3/349) upgrading bash [#####################] 100%
( 4/349) upgrading kernel-headers [#####################] 100%
( 5/349) upgrading tzdata [#####################] 100%
( 6/349) upgrading glibc [#####################] 100%
(340/349) installing wavpack [#####################] 100%
(341/349) upgrading xine-lib [#####################] 100%
(342/349) upgrading xinetd [#####################] 100%
(343/349) upgrading xkeyboard-config [#####################] 100%
(344/349) upgrading xmms [#####################] 100%
(345/349) upgrading xorg-server [#####################] 100%
:: Could not detect nvidia-utils on system
:: Will attempt to use built-in libwfb
(346/349) upgrading xorg-xinit [#####################] 100%
(347/349) upgrading xscreensaver [#####################] 100%
(348/349) upgrading yelp [#####################] 100%
(349/349) upgrading zenity [#####################] 100%
real 56m46.062s
user 4m25.013s
sys 1m46.520s
[root@arch-02 jada]#
And for your tread question.
How long does it take to do a dist-upgrade on your distro?
one hour
real 56m46.062s
user 4m25.013s
sys 1m46.520s
After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
Archlinux rocks

JaDa wrote:Archlinux rocks
definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
root@moe:~ # apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies.
E: Unmet dependencies. Try using -f.
root@moe:~ # apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following extra packages will be installed:
exim4-base exim4-daemon-light
Suggested packages:
exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
The following packages will be upgraded:
exim4-base exim4-daemon-light
2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
1 not fully installed or removed.
Need to get 0B/1391kB of archives.
After unpacking 8192B of additional disk space will be used.
Do you want to continue [Y/n]?
Preconfiguring packages ...
dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
Package exim4-daemon-light is to be removed.
Package exim4-daemon-heavy is not installed.
Package exim4-daemon-custom is not installed.
dpkg: error processing exim4-daemon-light (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
Errors were encountered while processing:
exim4-daemon-light
[ Rootkit Hunter version 1.3.0 ]
File updated: searched for 152 files, found 131
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@moe:~ # apt-get install exim4-daemon-light
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies.
exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
root@moe:~ #
It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close.

How long does it take for Apple to send the content code for a free upgrade to Mountain Lion?

Has anyone managed to successfully receive the content code in their email for a free ugprade to Mountain Lion?
I bought my MBP on 14 July so I qualified for the free upgrade. Went to the website and filled in the form along with my serial number about 2 nights ago. Still haven't received my content code yet. How long does it take? Should I be speaking to someone already? Who?
Thanks.

We are being advised it can take up to 72 hours !

C3-00::How Long Does It Take To Upgrade Firmware.....

Hi
I am want to upgrade my nokia c3-00 firmware from 04.60 to 08.70 through PC via Usb cable...
How long does it take to upgrade,It moves to 5 MIUTES REMAINING and stucks there for hours...
I m upgading it first time...Please tell how much time it takes??

With a Broadband connection, it should not take more than 30-35 minutes..
Check thru' NSU ...

How long does it take for a cancellation fee to process? I just cancelled today and the customer service agent say the cancellation payment went through, but i see no charge on my credit card. On the website it say my cancellation is effective in march 16

How long does it take for a cancellation fee to process? I just cancelled my annual subscription to adobe audition today and the customer service agent say the cancellation payment went through of $74.90, but i see no charge on my credit card. On the website it says my cancellation is effective in march 16, 2015. So when will i be charged?

Hi ,
I'm very sorry to hear of the problems you have had moving to pay as you go.
Please can you give customer service a call and ask to speak to the pay monthly retentions team who will be able to fix this issue for you.
Click here for contact details.
Thanks
James

HT201364 How easy is it to upgrade to Mavericks from 10.6.8? How long does it take and what benefits do you get, please?

How long does it take to upgrade to Mavericks and what benefits for the 10.6.8 user? Is a straightforward download? Thank you, Kevin
What application do I select to facilitate the download?

Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table
Also note that Rosetta is no longer supported in Mavericks, Mountain Lion and Lion.
kevart wrote:
How long does it take to upgrade to Mavericks and what benefits for the 10.6.8 user...
MAVERICKS...
Check here to see if your Mac is compatible...
http://www.apple.com/osx/how-to-upgrade/
If so... would recommend at least 4GB of RAM... if not 8 GB
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...
NOTE:
It is both Prudent and Recommended to Backup Before any Major Update or Upgrade.
Mac World Installing Mavericks.
http://www.macworld.com/what you need-to-know.html

How long does it take to download mountain lion upgrade?

how long does it take to download the upgrade for mountain lion

Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

HT201318 How long does it take for the storage to be upgraded? I bought it this morning and it still hasn't gone on?

How long does it take for the storage to be upgraded? I bought some 12 hours ago and it still hasn't gone on my iPhone 4

Hi Katie,
Where are you looking on your phone to determine how much storage you now have? Are you looking under Settings>iCloud>Storage & Backup?
If so, and it still doesn't show the correct storage, try resetting your phone. Hold down the Home and Power buttons and continue to hold them down until the Silver Apple appears. Then check your storage again.
Post back with questions!
Cheers,
GB

How long does it take to get the upgrade code for mountain lion?

after submitting the online form how long does it take to get the code emailed from Apple?

sent a complain at around 9:30 PM (PH time) and got a reply at around 11PM. Got the code at around 1PM today.

What is the average duration of 1 full SAP life cycle or 1 end-to-end implementation. How long does it take to prepare DEV, QAS and PRD?

What is the average duration of 1 full SAP life cycle or 1 end-to-end implementation. How long does it take to prepare DEV, QAS and PRD in any company?

Anand,
let me start with saying that the question you ask may not help you to determine the duration of your project. As Ryan and others stated the duration of the project is highly dependent on the scope of the solution you are implementing, geographical scope, amount of modifications/enhancements, number of languages, number of users that need to be trained, amount of standard processes customer is able to re-use in the implementation and many other factors (like quality of implementation contractor you will chose and availability of customer and implementors resources). I can probably go on for another couple lines, but I guess you get the idea.
With that out of the way let's talk about some example implementations that will give you an idea - Ryan did great job outlining what I would call traditional approach above. I have couple examples where customers leveraged innovative deployment strategies that are available today. In particular the project teams leveraged pre-packaged services like RDS, World Template or Best Practices as their baseline solution and they built from there. Second acceleration technique customers now leverage is the deployment in the SAP HANA Enterprise Cloud to accelerate the time to initial setup of the system and thus move from traditional blueprinting to scope validation exercise that further shortens the time. There are other acceleration techniques we see applied in some cases like use of iterative implementation of the delta requirements on top of the baseline solution.
Let me offer few examples to illustrate what I explained above:
ERP implementation at Schaidt Innovations with 3 months long deployment of ERP solution using ERP RDS as a baseline (you can view their testimonial here - Schaidt Innovations: SAP ERP on HANA in the cloud - YouTube)
Customer in Asia with global template deployment that leveraged SAP ERP for Manufacturing with deployment to cloud and 9 countries rollout (Japan, Korea, China, Taiwan, Hong Kong, UK, Germany and US). The initial deployment took 4 months for first country and 2 months for rollout into the additional 8 countries - so total of 6 months. The original plan using traditional approach with full blueprint and heavy configuration was estimated to be more than double of the actual deployment time.
There are many other examples where customers follow the assemble-to-order delivery model for their project and gain significant benefits doing so. I suggest you to review some of the recordings we did in 2013 about this approach and if you are member of ASUG review the Agile ASAP sessions we did for ASUG PM SIG.
Link to webinars: SAP A2O Webinar Series Schedule
Let me know if you have any questions.
Jan

How long does it take to run execute dbms_stats.gather_dictionary_stats

Hello,
How long does it take to execute dbms_stats.gather_dictionary_stats? I need to run this prior to upgrading 10.2.0.2 aix to 11.2.0.2. I like to know how long it takes to execute because this is a very busy Production system and I do not want to take too much resource and db time from a busy Production system. Thank you.

I guess that is when Resource Manager comes into play:
http://download.oracle.com/docs/cd/B14117_01/server.101/b10739/dbrm.htm

Installing Windows 2003 Server Standard/XP is very slow- how long does it take?

Hello, I'm looking for some ideas here... I tried installing Windows 2003 on my newly build computer, but after 3 hours it still wasn't installed, and seemed to just be really really slow, and not frozen. I ended up giving up and tried putting windows xp on it, but after an hour it still didn't finish installing. I figure there really has to be something wrong here... The only thing out of the ordinary is that I'm using 4GB ram DDR2 667. How long does it take to install windows xp on your system?!?
Things that I've tried have been:
disabled hypterthreading
loaded optimized settings
changed sata to mode II
MSI 945G Neo-F Socket T (LGA 775) Intel 945G ATX Intel Motherboard
Seagate Barracuda 7200.9 ST3160812AS 160GB 7200 RPM SATA 3.0Gb/s
Intel Pentium 4 650 Prescott 800MHz FSB LGA 775 EM64T
pqi TURBO $GB (4 x 1GB) 240-Pin DDR2 SDRAM DDR2 667 (PC2 5400) Unbuffered Dual
POwer: Ultra Xfinity 500Watt ATX +5v +3.3v +12v1 +12v2 -12v +5vsb
BIOS 1.2
Optial Drive: Generic Toshiba DVD

1&3 and 2&4 seem to be working okay, I've tested all these combinations (this is just plugging in the memory and looking at the cpu in task manager)
mem1 in slot 1 okay (tested slot 1 okay)
mem1 in slot 1
mem2 in slot 3 okay (test 2gigs in duel channel first set of memory okay)
mem3 in slot 1
mem4 in slot 3 okay (tested 2 gig in duel channel second set of memory)
mem1 in slot 2 okay (tested slot 2 okay)
mem1 in slot 2
mem2 in slot 4 okay (tested the second duel channel okay)
mem1 in slot 1
mem2 in slot 3
mem3 in slot 2
mem4 in slot 4 high cpu
mem3 in slot 1
mem1 in slot 2
mem4 in slot 3
mem2 in slot 4 high cpu
I upgraded to the latest bios, no luck... I haven't run any extensive memory tests, but through the tests i did, it seems that the memory is okay. Given these tests do you think it is more likely a problem with the motherboard running 4 slots? Or maybe some power issue, where the 4 sticks of memory are not getting enough power to work right.
The power supply I am using is Xfinity 500W
+5V/30A +3.3/30A +12V1/16A +12V2/18A -12V/0.6A +5VSB/2.5A
Thanks for your feedback..

Sick of interleaving - how long does DLM take

Have had problems with a dishwasher tripping our electric over the past month and this has of course caused DLM to kick in any put interleave on line and limit my IP profile to always be below 60 mb. My data rate is currently 57957 and hasn't increased for the past month steadily dropping from the 60mb ip cap last month when power cuts happened.
Before my connection was working great and my data rate was a lot closer to the Max data rate, currently it is at 57957, Max at 65760. The Max data rate has been as high as 69000, still no increase in IP data rate.
The main thing though is interleaveing, I know that this is controlled by DLm and cannot be turned of directly, but as my IP profile seems to be stuck and steadily decreasing on every connection restart (which the hh5 seems to do on a whim sometimes)
My line stats seem to be ok SNR 6.0\6.0
Line attenuation 18.2
Please can my IP profile be reset to remove my IP cap which would hopefully put me back on fastpath which I had been on for months and months till the power cuts

same as mine https://community.bt.com/t5/BT-Infinity-Speed-Connection/Poor-Service-from-BT-adamant-about-problem/...
Please can a mod look at my connection just reset the IP profile please, there are no faults on my line!!!!!!!!!
Re: Poor Service from BT, adamant about problem!
Options
on ‎28-07-2014 1h09
I feel this is the exact problem I've been having posted on here titled sick of interleaving - how long till DLM turns it off.
Could you check if your 1st hop is around 12 ms (click start, run, cmd, enter, tracert www.BBC.co.uk) my guess would be interleaving has been put on your line too.
If your router resets too many times (mine due to faulty dishwasher tripping electric)
Once this is on it seems to take ages to reset back to normal. Like you I have the hh5 and this will sometimes do a random disconnect (firmware bug or BT messing with connection?) I always see in my event log a cwmp login from bt which will then reboot the router.
Like you my attenuation is very short (18.2) SNR At 6.2 but it seems because my hh5 sometimes just reboots connection ( usually around 2.20am going from event logs) that interleaving will never come off. I have read that it takes 2 weeks constant connection for speeds to return to normal and interleaving to be turned off.
Not happy about my connection for last month, after being very happy for months and months. As soon as DLM has kicked can feel difference especially in pings more than raw speed for me.
Will run down my contract and jump ship as soon as contract runs out if mine doesn't improve.
Message 19 of 20 (7 Views)
Posted from my mobile
Add Tag...
Quick ReplyReply
smoke999
Visitor
Posts: 4
Registered: ‎26-07-2014
0
Re: Poor Service from BT, adamant about problem!
Options
on ‎28-07-2014 1h17
https://community.bt.com/t5/BT-Infinity-Speed-Connection/sick-of-interleaving-how-long-does-DLM-take...
Is this the BT backdoor to manange connection?
(172830.560000) CWMP: session completed successfully
22:05:05, 27 Jul.
(172830.320000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:05:01, 27 Jul.
(172826.800000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:05:01, 27 Jul.
(172826.790000) CWMP: Session start now. Event code(s): '2 PERIODIC,4 VALUE CHANGE'
22:05:01, 27 Jul.
(172826.590000) CWMP: Initializing transaction for event code 2 PERIODIC

Upgraded service to next tier (50/20) - How long does it take?

Similar Messages

Maybe you are looking for