Upgrading SQL 2008 R2 to SQL 2012 SP1

Hi everyone,
We are testing some upgrades in a lab environment. We have upgraded to SCCM 2012 R2 and are now looking at upgrading to SQL 2012 SP1 from SQL 2008 R2. Both SCCM and SQL are on one server. (The next step is to split SCCM and SQL but that's another topic)
The question we are asking is, what should be our process for the upgrade? Do we need to stop SCCM services before doing the SQL upgrade? If, so, which ones?

Hi,
You need to stop all Configuration Manager services at the site.
For the process of the upgrade, you could check the following document.
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigUpgradeDBSrv
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Migrating SQL 2008 DB to SQL 2012 for SharePoint Farm

Our SharePoint 2013 Farm runs on ISCSI Disk on Windows 20008 R2 Standard SP1 Platform with SQL 2008 R2 Standard SP2.
Now we are planning to move this ISCSI Disk to another SQL 2012 Standard Platform and then upgrade the SQL 2008 Databse to SQL 2012. Can some one please let me know what challenges we might face during this implementation.

http://technet.microsoft.com/en-us/library/cc512723(v=office.14).aspx
It depends if you want to move all, or just some, of your databases to the new server. If you need to move all of them that link describes the process but in short;
Backup and restore all databases to the new server
Configure the server roles and logins for the SharePoint accounts on SQL
Create (or modify) your SQL alias to point to the new server

Upgrade single instance from 2008 R2 SP2 to 2012 SP1

We have a central SQL 2008 R2 server that has multiple named instances, one each for System Center Configuration Manager 2012 R2, System Center Operations Manager 2012 R2, Virtual Machine Manager 2012 R2, App Controller and one for CRM 2013 SP1.
Can we easily upgrade just the CRM instance to 2012 SP1? Any suggestions how to approach this.

I feel it's a risk taking process because there is lot of dependency and complexity in your current setup. Some of the shared components will also get upgraded and rollback process is going to be harder enough to bring back the old setup. I would not
recommend you to go with In-place upgrade.
You can try side by side Upgrade strategy:- Move the CRM instance to a different instance.
Upgrading CRM is not straight forward. It has dependency and you require to modify few registry keys and requires lot of changes to be done to the configuration at the app Server.
I'll recommend you to go through the support and upgrade document of CRM.
--Prashanth

Migrate SQL 2008 Analysis database to 2012 AS database along with data level security defined in current production cube

I want to migrate Analysis Services 2008 database to 2012 AS database along with data level security defined in current production cube
Note: Only Production environment have security, while no security is defined in development environment
Potential Approach:
1 - Using Synchronization Wizard: Gives me error : "The OLAP element at line1 can not appear under envelope......" and this is because Synchrinzation works only for same version
and in my case, there are different versions of SQL (SQL 2008 and 2012)
2 - Using Visual studio conversion wizard - Convert SQL 2008 AS project to 2012 and then process cube, so I can get the cube working but then how can I get data level security since 100's of data level security is defined in production Cube, so how can I
migrate that across
3 - Script out XMLA and deploy cube - But then again having issues with how can i script SSAS security
4 - Would taking backup of SSAS 2008 database and restore to SSAS 2012 will help ?
Any suggestions would be appreciated
Thanks,
Mihir

Hi Mihir,
According to your description, you want to migrate the SQL Server Analysis Services (SSAS) 2008 database which have some security setting with it to SSAS 2012, right? We can migrate existing Analysis Services databases either during Setup, by upgrading an
existing instance of Analysis Services, or after Setup, by running the Migration Wizard. Generally, when migrating a database to another server, all the setting will be migrated. So in your scenario, you can refer to the steps on the links below to migrate
your SSAS database.
How to: Migrate Analysis Services Databases
Migrating Existing Analysis Services Databases
Regards,
Charlie Liao
TechNet Community Support

Upgrade FIM 2010 R2 Sp1 Databases from SQL 2008 R2 to SQL 2012

Hi,
I want to upgrade my SQL from 2008 R2 to SQL 2012.
FIM Databases
1) FIMService Database
2) FIMSynchronizationService Database
Mentioned above are my FIM databases running on SQL server 2008 R2 . Now I was looking for some article which could tell me if SQL can be upgraded without affecting my existing databases of FIM or if i can move these databases to a new server having SQL
2012
Activity I want to perform : Create a fresh Server of SQL 2012 and move my FIM 2010 databases over it by restoring the backups. but as per the link below it seems not possible!
http://social.technet.microsoft.com/wiki/contents/articles/5465.fimilm-how-to-move-the-backend-sql-server-synchronization-service-database.aspx

Hi Shivam,
Please take a look here: Release Notes for Forefront Identity Manager 2010 R2 SP1.
In the table you have tasks to upgrade SQL for FIMService and FIMSych.
FIM Service:
Upgrade FIM Service servers to FIM 2010 R2 SP1
Stop FIM Service on all servers
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Service on all servers
FIM Synch:
Upgrade FIM Sync to FIM 2010 R2 SP1
Stop FIM Sync
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Sync
If you are not making in-place upgrade, I would do something like here:
Stop FIM Services
Backup the databases at SQL 2008
Restore backed up databases on SQL 2012
Make sure SQL Agent Jobs are moved (FIMService)
Make sure Broker is enabled on FIMService database
On FIM machines create SQL alias using cliconfg utility. Alias should have the name of "old(sql2008) SQL" and point to new name/instance.
Start FIM Services - they would use "old" name to connect, but it would be translated to new location. So they would start.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

SCOM 2012 R2 database in-place upgrade SQL 2008 R2 to SQL 2012

Hello,
I intend to upgrade my SCOM SQL 2008 R2 environment to SQL 2012. I have (of course) an OPS, DWH and Reporting Services instances/databases.
When I run the Update Advisor I run in to several issues.
Has someone had experience with an in-place SQL update?
Help would be appreciated.
Greetings,
Pim
SCOM Administrator

have a read at this detailed post by one of the MVPs
http://thoughtsonopsmgr.blogspot.sg/2013/01/om12-sp1-upgrading-sql-server-2008-sp1.html
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

SQL version problem during SCCM 2012 sp1 setup

Hi
I am trying to install SCCM 2012 sp1 with a remote sql 2012 server.
during setup when I enter the SQL name i hit next and then I get this error.
"Configuration Manager requires Microsoft SQL Server 2008 SP2 with Cumulative update 9 or higher, Microsoft SQL Server 2008 SP3 with Cumulative update
4 or higher, Microsoft SQL Server 2008 R2 SP1 with Cumulative update 6 or higher or Microsoft SQL Server 2012 with Cumulative update 2 or higher,"
I installed SQL sp1 and CU3 as well. but still the same error.
please assist
thanks
troy

Hi,
If you use default instance, please do not fill in the instance name.
You could use “telnet sqlserver 1433” to verify the connection and port.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

MIgrate SQL 2008 R2 to SQLExpress 2012

I have a website with a 2008 R @ database. I am trying to move from that host to another host. The new host has 2012 databases. I have a copy of my 2008 database on my local machine that I restore with back-ups from my production DB.
I am having problems migrating the 2008 DB to the 2012. The host had me download SQL Server Express and its Tools. I have a backup file from my local machine but when I try to use it get an error. If I try to copy the database from the 2008 DB
to the 2012, I get an error "
TITLE: Copy Database Wizard
The destination server cannot be a SQL Server 2005 or later Express instance.
But if I try to restore it ot a blank database on the 2012 I get another error_"
TITLE: Microsoft SQL Server Management Studio
Restore of database 'UMDB' failed. (Microsoft.SqlServer.Management.RelationalEngineTasks)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The backup set holds a backup of a database other than the existing 'UMDB' database. (Microsoft.SqlServer.SmoExtended)
Can this be done?

Hi Dave,
From your description, you fail to restore a SQL Server 2008 R2 database to SQL Server 2012 Express. I test the scenario as yours, I restore the database from ‘BDUC3.bak’ on ‘UMDB’ database via SQL Server Management Studio (SSMS) and T-SQL in
SQL Server 2012 Express. Everything works as expected.
The error "The process cannot access the file because it is being used by another process" can be caused by several factors. Please make sure that the backup file is not used by other processes. I recommend you copy the ‘BDUC3.bak’ file to SQL
Server 2012 Express backup folder such as C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Backup. In addition, please remove process which are accessing the UMDB database.
With SSMS 2012 GUI, you can perform the steps which are shown in below screenshots.
With T-SQL, you can directly execute the following scripts in SQL Server 2012 Express. Then check if you can restore the database successfully.
USE master;
GO
RESTORE FILELISTONLY
FROM DISK = 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Backup\BDUC3.bak'
RESTORE DATABASE UMDB
FROM DISK = 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Backup\BDUC3.bak'
WITH replace,
RECOVERY,
MOVE 'BDUC3' TO 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\UMDB.mdf',
MOVE 'BDUC3_log' TO 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\UMDB_log.ldf';
GO
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.

Linked Server from SQL 2008 to Connect to 2012 read only replica never works

I have two Production Database Servers
1. SQLServer2008 (2 Nodes Cluster)
2. SQLServer2012 with 2 read only replica (3 Nodes Cluster)
I would like to draw a line here, We have routing table and URL working perfectly fine.
We have tested LINKED Server from 2012 Box to production Server by Specifying APPLICATIONINTENT = ReadOnly; it works perfectly fine, the routing is being used.
When we create linked server from SQL Server 2008 Box (Please note we have installed SQL Server 2012 Client tools on this box and Restarted the Servers) using the below script
USE [master]
EXEC master.dbo.sp_dropserver @server=N'AGL1', @droplogins='droplogins'
GO
EXEC master.dbo.sp_addlinkedserver @server = N'AGL1'
,@datasrc='AGL1'
,@provider='SQLNCLI11'
,@provstr='ApplicationIntent=ReadOnly;Database=AdventureWorks2012'
Linked Server is created, Now when I run the Query
exec ('select @@servername') at AGL1
It always brings the Primary READ/WRITE node name only, after lots of research I found that, this linked Server is always using SQL Native Client 10.0 only, even after creating Linked Server using SNC 11, That is the reason it is not going to routing
table. Its always connecting to Primary node.
Below is the way I found it, on 2012 Production Server I executed below Query
SELECT session_id, protocol_type, driver_version =
CASE SUBSTRING(CAST(protocol_version AS BINARY(4)), 1,1)
WHEN 0x70 THEN 'SQL Server 7.0'
WHEN 0x71 THEN 'SQL Server 2000'
WHEN 0x72 THEN 'SQL Server 2005'
WHEN 0x73 THEN 'SQL Server 2008'
ELSE 'SQL Server 2012'
END,client_net_address ,client_tcp_port,local_tcp_port ,T.text
FROM sys.dm_exec_connections
CROSS APPLY sys.dm_exec_sql_text(most_recent_sql_handle) AS T
The help is taken from msdn (Link Provided below) for the above Query
https://msdn.microsoft.com/en-us/library/dd339982.aspx
and I found it always uses SQL Server 2008 SNC.
My Question is, is there a way to force SQL Server to use SQL Server Native Client 11.
Has anyone tried this setup?
Thank you in advance.

Unfortunately no, there is no other way of forcing it without restart. The SQL Server stack has no idea of the existing Native Client as it booted prior its installation. And you cannot force "DLL reload" without proper service restart.
Ivan Donev MCT and MCSE Data Platform

SQL 2008 R2 error: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

after some year work with SQL server 2005,i decide change to SQL server 2008 R2.
When i completed install SQL 2008 R2,i can't connected to SQL server due to this following error
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
And when i click to technical details,i take some thing like this
===================================
Cannot connect to HUY-PC\SQLEXPRESS.
===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
Error Number: -1
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Please!!!Some body help me solve this problem(except format my computer),i really really need your advice.

Hi huydaibang,
The older version SQL Server 2005 could be installed with SQL Server 2008 R2 side-by-side. It could not be the problem.
The reason that we get this error message is the client stack could not receive SSRP response UDP packet from SQL Browser.
Here are the steps:
1) Make sure your server name is correct, e.g., no typo on the name.
2) Make sure your instance name is correct and there is actually such an instance on your target machine.
3) Make sure the server machine is reachable, e.g, DNS can be resolve correctly, you are able to ping the server (not always true).
4) Make sure SQL Browser service is running on the server.
5) If firewall is enabled on the server, you need to put sqlbrowser.exe and/or UDP port 1434 into exception.
For more information, please refer to
http://blogs.msdn.com/b/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

How to install sql 2008 r2 in sql 2008

Hi,
I have DB stored in sql 2008. i need to install sql 2008 r2 without db deletion in sql2008. please let me know which option i should choose and clear solution to me.
Thanks,

Hi,
You can install SQl Server 2008 r2 side by side to SQL Server 2008 Microsoft supports this scenario. I would like you to read
This article before proceeding .
If you just want to move database from SQL server 2008 to SQL server 2008 r2 backup the database from 2008 and restore it on 2008 r2. Make sure you map orphaned users to logins
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Error while trying to upgrade SQL 2008 (SP2) to SQL 2012: There was a failure to calculate the applicability of setting LICENSEPATH.

Hi,
I am trying to upgrade one of our SQL Server Enterprise (2008 (SP2)) to 2012. I am using the upgrade option but it gives me the following error:
Error Code 0x85640002: There was a failure to calculate the applicability of setting LICENSEPATH
We have downloaded the image from our Volume Licensing account. Also, the same image was used to install SQL 2012 on Windows Server 2012 R2 servers without any issues.
Below is the install summary.txt. I have tried everywhere but no go. Would really appreciate any assistance.
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2057043966
Exit facility code:            1380
Exit error code:               2
Exit message:                  There was a failure to calculate the applicability of setting LICENSEPATH.
Start time:                    2014-02-28 10:58:49
End time:                      2014-02-28 10:58:58
Requested action:              RunRules
Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x0BA02FC6%400x294A9FD9&EvtType=0x0BA02FC6%400x294A9FD9
Machine Properties:
Machine name:                  xxxxxxx
Machine processor count:       2
OS version:                    Windows Server 2008 R2
OS service pack:               Service Pack 1
OS region:                     U.A.E.
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         D:\x64\setup\
Installation edition:
User Input Settings:
ACTION:                        RunRules
CONFIGURATIONFILE:
ENU:                           true
FEATURES:
HELP:                          false
INDICATEPROGRESS:              false
INSTANCENAME:                  <empty>
PID:                           *****
QUIET:                         true
QUIETSIMPLE:                   false
RULES:                         GlobalRules
UIMODE:                        Normal
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140228_105848\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException
    Message:
        There was a failure to calculate the applicability of setting LICENSEPATH.
    HResult : 0x85640002
        FacilityCode : 1380 (564)
        ErrorCode : 2 (0002)
    Data:
      SettingId = LICENSEPATH
      WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException@2
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
        at Microsoft.SqlServer.Configuration.BootstrapExtension.ValidateChainerSettingAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
    Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingValueException
        Message:
                There was a failure to calculate the default value of setting LICENSEPATH.
        HResult : 0x85640001
                FacilityCode : 1380 (564)
                ErrorCode : 1 (0001)
        Data:
          SettingId = LICENSEPATH
          WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingValueException@1
        Stack:
                at Microsoft.SqlServer.Chainer.Infrastructure.Setting`1.CalculateValue()
                at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallQueuedSubscriberDelegates()
                at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.Publish(Publisher publisher)
                at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
        Inner exception type: System.ArgumentException
            Message:
                        Culture ID 3072 (0x0C00) is not a supported culture.
                        Parameter name: culture
            Stack:
                        at System.Globalization.CultureInfo..ctor(Int32 culture, Boolean useUserOverride)
                        at System.Globalization.CultureTable.GetCultures(CultureTypes types)
                        at Microsoft.SqlServer.Configuration.SetupExtension.LcidUtilities.GetLangPackParentFolderForLcid(String lcid)
                        at Microsoft.SqlServer.Configuration.SetupExtension.LcidUtilities.GetLcidFolder(ServiceContainer context, String baseFolderFullPath)
                        at Microsoft.SqlServer.Configuration.SetupExtension.LicensePathSetting.DefaultValue()
                        at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallFunctionWhileAutosubscribing[T](SubscriberDelegate
subscriberDelegate, Int32 priority, AutosubscribingFunctionDelegate`1 function)
                        at Microsoft.SqlServer.Chainer.Infrastructure.Setting`1.CalculateValue()
Regards,
Mohammed

Culture ID 3072 (0x0C00) is not a supported culture.
                        Parameter name: culture
This appears to be the root problem. It seems that the regional settings on this machine is messed up. 0x0C00 is an unusual LCID, they do not normally not end in two zeroes.
is there a custom culture installed on this machine?
Review the regional settings and also check the System locale. If it looks spooky, set it to Arabic - U.A.E. if this is where you are located.
Erland Sommarskog, SQL Server MVP, [email protected]

Side effect of SQl server upgrade from 2008 R2 to Server 2012, logical name of log file changed for one database

I came to know that name has changed when I tried to shrink the file. Here is the error message I got:
Shrink failed for LogFile "Tfs_TESTTFS_Log'. (Microsoft.SqlServer.Smo)
Additonal information
An exception occured while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.COnnectionInfo)
Could not locate file 'Tfs_TESTTFS_Log' for database 'Tfs_TESTTFS' in sys.database_files. The file
either does not exist, or was dropped. (Microsoft Sql Server, Error: 8995)
This is test environment upgrade and I checked on production environment which is still on SQL 2008R2, shrink works fine.
Please help.

I did in place Upgrade.
Before Upgrade
Logical Names
Database Name: Tfs_TESTTFS
Database Log: Tfs_TESTTFS_Log
After Upgrade
Logical Names
Database Name: Tfs_TESTTFS
Database Log: TfsVersionControl_Log
Thx

SCCM 2012 moving site Database server from SQL 2008 R2 cluster to 2012 cluster

Hello,<o:p></o:p>
Using the SCCM 2012 setup, I get
the following errors and then it eventually fails……I’ve been uninstalled and
installed SQL native client .....still unable to move SQL database,i get this error:<o:p></o:p>
*** Failed to connect to the SQL Server, connection type: SMS ACCESS. Configuration Manager Setup 25/02/2015 21:01:03 8624 (0x21B0)
INFO: SQL Connection failed. Connection: SMS ACCESS, Type: Secure Configuration Manager Setup 25/02/2015 21:01:03 8624 (0x21B0)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 25/02/2015 21:01:07 8624 (0x21B0)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 25/02/2015 21:01:07 8624 (0x21B0)
I know that the problem is related to a certificat issue but i didn't arrived to resolve it.

Have a look at this post (pay special attention to the comments):
http://blogs.technet.com/b/configurationmgr/archive/2013/04/02/how-to-move-the-configmgr-2012-site-database-to-a-new-sql-server.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How do I move a P6 SQL 2008 database to SQL 2012

I have backed up and restored P6 from one server to another server. I have ran a couple of suggested scripts to sync the PMDB database with the Master database with little success. I am still unable to logg on to the PMDB database with P6 Pro. I would appreciate any help that is available.
Thanks

KB http://digital.ni.com/public.nsf/allkb/E076A0661E03F1EB862571A800079E7B?OpenDocument
Ryan Shi
National Instruments

Upgrading SQL 2008 R2 to SQL 2012 SP1

Similar Messages

Maybe you are looking for