Upgrading the db to 64bit for our multinode 11.5.10.2

Hi,
I am going to upgrade my db tier to 64 bit. It is a multinode 11.5.10.2 install. Any particular items/gotchas that I need to keep an eye out for in the 11i side of things?
Thanks,

Duplicate post:
Upg db tier from 32 to 64 bit on my multinode 11.5.10.2

Similar Messages

My husband and I share the same apple Id for our iphones, now each one has different contacts, email, pictures, information, etc how coul I change the id of my iphone without delete any information?

My husband and I share the same apple Id for our iphones, now each one has different contacts, email, pictures, information, etc how coul I change the id of my iphone without delete any information?

Welcome to the Apple Community.
Deleting an account from a device will not delete the information from the account, if that is what you are asking.

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How do we determine the HTTP authentication header for our hosted solution?

How do we determine the HTTP authentication header (adobeconnect_admin_httpauth) from our hosted solution? The documentation says to find it in a custom.ini file but I have no clue how to access that.
I need to supply that to the adobeconnect plugin used with a Moodle instance, screnshot below.
If it helps, when I click "Test Connection", I see the following output.
A series of tests have been run in order to determine whether the Adobe Connect Pro server has been properly setup for this integration to work and to also determine whether the user credentials provided in the activity global settings has the correct permissions to perform the neccessary tasks required by the activity module. If any of the tests below have failed, this activity module will not function properly.
For further assistance and documentation in how to set up your Adobe Connect Pro server please consult the MoodleDocs help page for this activity module Help page
Sending common-info call:
successfully obtained the session key: na11breezrirhb4f4ryf5shqy
successfully logged in as admin user
Testing retrevial of shared content, recording and meeting folders:
error obtaining shared content folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining forced-archives (meeting recordings) folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining meetings folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error creating meeting testmeetingtest folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-update</param><param name="type">meeting</param><param name="name">testmeetingtest</param><param name="folder-id"/><param name="date-begin">2015-03-14T06:53:39.000+00:00</param><param name="date-end">2015-03-14T07:53:39.000+00:00</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="invalid"><invalid field="folder-id" type="id" subcode="format"/></status></results>
error creating user testusertest
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">principal-update</param><param name="first-name">testusertest</param><param name="last-name">testusertest</param><param name="login">[email protected]</param><param name="password">9B396EA828A00203FB3E8E69010FE537</param><param name="extlogin">[email protected]</param><param name="type">user</param><param name="send-email">false</param><param name="has-children">0</param><param name="email">[email protected]</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
What are we missing?
Thanks!

Here is the docuementation for loging in with an HTTP Headder Adobe Connect 9 * Log in from an application
Seeing as there may be some modification to files on the server, you may need to work with Adobe Support to see if they can be modified in the Hosted environment.Adobe Connect Help | Adobe Connect Support

Failed to upgrade the iOS 4.2 for my iPad

My iPad information: iPad 16G, software version: 3.2.2.
iTune version: 10.1.0.56.
when I try to upgrade the iPad to iOS 4.2, then the iTune always show "error = - 3259". I have try many times, but still fail.

Hi Carolyn, hope you might be kind enough to direct me further. I experience the same -3259 error but only after the download of the iOS 4.2 is complete and has progressed to the "processing file" stage.
Given that other iStore downloads via iTunes are successful, I can only infer there must be something special about the type of file in this download that my firewall or antivirus doesn't like. Pausing virus protection or turning off firewall does not seem to have an effect. I did not take the risk step of disabling both; I've asked support for file type data or something else I can use to allow it to pass .. but no joy there.
Have an appointment next week at an Apple store, but hoping some clued-in person might have the answer before that becomes necessary. Difficult as the iPad is actually working fine, just cannot obtain the file to update the OS!
Thanks for whatever thoughts you have.
David

HT4759 I have OS X Lion 10.6.8 and I don't know how to upgrade the 10.7.4 for Icloud.

ICloud - I understand that I need OS Lion 10.7.4, but I can't find if I can upgrade from 10.6.8 which is what I have. Can anybody help me?

You have to buy it from Apple online.
Installing Lion: Our complete guide - http://www.macworld.com/article/161064/2011/07/installing_lion_complete_guide.ht ml
OS X Lion: Installation Guide, Boot Discs and Q&A - http://www.macstories.net/mac/os-x-lion-installation-guide-boot-discs-and-qa/
Make sure your computer can run it:
To get more information about your computer, go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
Compare with:
System requirements for OS X Lion and Mac OS X v10.6 - http://support.apple.com/kb/HT4949
Make sure you want to run it:
Lion and Mountain Lion application compatibility - http://roaringapps.com/apps:table

Is the Time Capsule Right for Our Family?

I just bought one, but I'm coming to realize I didn't understand how it works. Before purchasing it, I tried to explain our family's needs to Apple Store personnel on several occasions but apparently did not succeed because they indicated it would fill the bill. Please let me try to explain on this format in the hope that someone with a better understanding can clarify for me how it is used.
First of all, I don't need it as a wireless transmitter. Our family uses a 2005 iMac as a software base station link to our MacBooks and that seems to work okay. A cable modem connects to that iMac, and we also get cable TV and phone service from the cable company.
What we wanted was a backup disk that we could send data to wirelessly using Time Machine. It struck me that the three most likely ways one could lose data would be a hard-drive (or DVD) crash, fire, or theft. For fire and theft contingencies I wanted to place the Time Capsule in an obscure part of the house away from the iMac. It wouldn't be perfect but it would improve the odds.
I tried loading my MacBook onto the Time Capsule with an ethernet cable bought for that purpose. The process seemed to work, but I couldn't actually access the data. Later I unplugged the TC. The flashing amber light came on when I reconnected it. The Apple service rep who I then spoke to on the phone said (I think) the Time Capsule must be connected to the Internet either directly from the cable company feed or through an ethernet cable. That would seem to negate two of the three contingencies I thought the Time Capsule would help protect us from. Is she correct? Do readers have needs similar to ours? If so, how do you meet them?
Thanks.

Thanks for responding.
My basic question is this: can I back up data wirelessly to the Time Capsule if it is not directly connected to the Internet? I want to plug it in a socket in another part of the house away from the cable modem. I do not want to connect it to the modem because it would then be close to the other computers, thereby increasing the risk of losing all to fire or theft.
If I can get past this fundamental issue, I will focus more on making the TC work.

The Best Battery Charger for our laptops

I stumbled onto a Apple Powerbook charger by newertech.com.
This has always been a problem with having no access to power brick and having batteries
going dead by the hour with no way to charge them while one is being used.
It has 2 charging ports, one for reconditioning on the left and standard charging on the right.
I have 3 batteries where one was just not responding, and would die too fast.
It has cycle count of 176, and a full charge of 1639 as of 01-21-09.
After it went through restore mode for most of the afternoon, it now has a full charge of 1947.
It gets better each time I put it through the restore process.
A second battery was not doing as well, and it really came back great as well.
I found it through Mac sales of Other World Computing, IL. for $150
I ordered there firewire 800 7200 rpm external drives as well. Nice Stuff.
Totally satisfied with this gear.
And get this, it's made in the USA. That's mostly impossible today with China almost making our milk.

Philscbx:
Glad you are happy with your purchases and with OWC.
cornelius

How to upgrade the extended web application for FBA from MOSS 2007 to SharePoint 2010?

Hi All,
Currently my farm version is MOSS 2007 with SP3.
I have a web application on port 80, and is based on windows authentication, and i extend it on the port 90, and the authentication is FBA with SqlServer.
I know that SharePoint 2010 has a new claims based authentication, and in a single web application you can do both windows authentication and FBA.
Now i want to know, when i migrate the MOSS 2007 port 80 and port 90, which method should i choose?
1. in SharePoint 2010 farm, Create a classic based web application on port 80, and extend it on port 90, enable FBA on port 90. It is the same as MOSS 2007.
2. in SharePoint 2010 farm, Create a claims based web application, and enable both windows authentication and FBA.
Thanks.

FBA requires claims so you'll need to create a claims based web application. Whilst you might extend the site to give you a FBA portal the web application itself will have to be claims based.
I would definitely be looking at using a database attach upgrade path in your case to give you the opportunity for testing as moving between authentication providers can be painful.

HT5622 My husband and I share the same apple id for our iphones, how do we change the phone number associated with our apple id to his phone number? He is getting my messages because the ipod has my number in it not his?

My husband and I have iphones that use the ame apple ID, but different numbers and email addresses, how do we change the phone number that is associated with his ipod to his phone number?

Use his ID for Settings>Messages>Send And Recieve and for Settings>FaceTime.
If he does not have an ID then
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

HT204053 Me & my wife have the same apple ID for our devices , how can we separate them

Me and my wife have share the same apple ID , now we want to separate them with different IDs , how can we do so , and can we keep the purchases we made on the app store , or if i changed the ID i will not be able to keep my purchases

Welcome to the Apple Community.
To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud too.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photostream, it does not affect any of your iTunes services.
To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
Your solution would be to use different accounts for iCloud and the same account for iTunes.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, (Settings > iCloud, scroll down and hit "Delete Account") then create a new one using the "create Apple ID" button.

How to find out the idoc type required for our requirement

Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
Prasanna

Hi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A

How can my wife and I both use the same iCloud account for our respective iPhones so we can share information and music?

Trying to set up both my wife's and my iPhone on the same iCloud account so we can share info. Is this possible?

Hi tsmithfsj,
If you have questions about setting up iCloud on multiple devices, you may find the following site helpful:
Apple Support: iCloud Setup
http://www.apple.com/icloud/setup/
Cheers,
- Brenden

My mother and I share the same iTunes account for our iPhones I just updated and back up my iPhone to my computer why is my mom getting all my text messages

Why is my mom getting all my messages I just update my iPhone and back it up to my computer and now she is getting all my messages this has happens before when my little sister first got her I touch she was always getting my messages

Have a look here...
setting-up-multiple-ios-devices-for-messages-and-facetime.html

UPGRADE Headstart 6523 TO Headstart for 9i 6530 concise step by step proc

Hello,
We are using Headstart for Designer 6i. We have upgraded our designer repository to 9i and therefore have to upgrade the headstart to "Headstart for Designer 9i 6530, 6531 and then 6532". The upgrade pdf file states that we should patch upgrade to 6521, 6522, and 6523 before applying the main UPGRADE to Headstart for 9i (6530). We have successfully patch upgraded to 6523 without problems. However when we run the patch script 6530 against the repository, we have come out with so many invalid objects under the HSU65 schema. WHY ?
Could someone give us a concise step by step procedure for doing this upgrade.
Your response will be very much appreciated.

Upgrading the db to 64bit for our multinode 11.5.10.2

Similar Messages

Maybe you are looking for