Upgrading to Enterprise From Non_Enterprise

I'm running a 8.1.5 non-Enterpise installation. I need
partitioning. Two questions:
1) Is it true that partitioning is available only with
Enterprise?
2) How do I upgrade to Enterprise from Standard? Do I
have to create a new ORACLE_HOME, etc?
Thanks,
Tony

If you are using the Standard Edition of the Oracle Database and want to upgrade to the Enterprise Edition, then complete the following steps:
1. Ensure that the release number of your Standard Edition server software is the same release as the Enterprise Edition server software. For example, if your Standard Edition server software is release 9.2.0.1.0, then you should upgrade to release 9.2.0.1.0 of the Enterprise Edition.
2. Shut down your database.
3. If your operating system is Windows, then stop all Oracle services, including the OracleServiceSID Oracle service, where SID is the instance name.
4. Deinstall the Standard Edition server software.
5.Install the Enterprise Edition server software using the Oracle Universal Installer. Select the same Oracle home that was used for the de-installed Standard Edition. During the installation, be sure to select the Enterprise Edition. When prompted, choose Software Only from the Database Configuration screen.
6.Start up your database. Your database is now upgraded to the Enterprise Edition.
10g version if you prefer:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#BABFBJCC

Similar Messages

  • Upgrading to Enterprise from Standalone Questions

    Hello,
    We currently have successfully rolled out the Standalone installation of ZAM 7.5 but we want to move to Enterprise with SQL 2000.
    I would like to build and install a new server (same name, ip address, hardware etc.) with the Enterprise version and scrap the Standalone database. Basically we're starting fresh. Would this work with the existing client installs out there?
    Would there be any problems with this (seeing as though we rolled out the clients to over 800 machines) or would it be better to perform the upgrade on the Standalone to Enterprise and clear out the database?
    Any help or insight would be appreciated.
    Thanks!

    Yup - as Jared said, that should work just fine as each workstation will have a unique identified (WorkstationOID) in the registry - as the new build will have no workstation records it will happily accept these machines with their current OIDs.
    One recommendation / note - patch the new build up to the same IR and PRU level (or newer) than in the current standalone system, add your UDFs and configure your Option Sets before you let the workstations connect to the Collection Server(s), as the ZAM server(s) will:
    a) Upgrade *or* Downgrade the Clients to the server IR version, which can take a long time as it is throttled to avoid network saturation (allow maybe 1-2 days for 800 workstations)
    and
    b) Push down the current KB files (a merge of the PRU and your Local Products) then run a scan (assuming you have enabled a collection schedule etc.)
    These file transfers can add up to 10-20MB per workstation from the Collection Server, so worth getting right the first time :)

  • Upgrade Hyperion Enterprise 6.2 to 6.5

    Hi,
    We want to upgrade Hyperion Enterprise from version 6.2.1 to version 6.5.1 so I wanted to know if there is any document document and if there are do's and don'ts for the same. Will there be any functionality that will not be working in this case ???
    Thanks,
    --XAT                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Hi,
    I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
    Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
    Hope this helps,
    Thank you,
    Charles Babu J

  • Can i upgrade to windows 8.1 enterprise from 90 day evaluation version

    can i upgrade to windows 8.1 enterprise from 90 day evaluation version? as our company has volume license key for win 8.1 enterprise purchased

    yes you can.
    Skip Product Key Input in Windows 8.1 Setup
    To achieve our objective, we need to edit the ei.cfg (edition configuration) file present inside the
    /sources folder of the ISO image. All we need to do is to provide the version details inside this file so that Windows Setup is not needed to ask for a product key to install the appropriate version relevant to that product key.
    If you are going to install Windows 8.1 using a USB drive, transfer the installation files to the USB and then proceed to step 2. On the other hand if you need to create a DVD, open the ISO using a utility such as MagicISO so that the structure is not affected.
    Browse to the /sources folder.
    Look for the ei.cfg file and open it in a text editor such as Notepad or Notepad++ (preferred). If the file doesn’t already exist, create a new text document and rename it as ei.cfg
    Now amend the file depending on the version which is included in your particular copy and the version which you want to install. For Professional edition which will be the best bet for most of the users, paste the following context into the
    ei.cfg file. Make sure that anything that already exists in the file should be cleared first.
    [EditionID]
    Professional
    [Channel]
    Retail
    [VL]
    0
    Save the file and run the Windows 8.1 setup again. The setup will not ask for the Product Key anymore.
    This is not a hack or anything illegal. The configuration above is supported by Windows installer and is well documented by Microsoft and can also be used on some other versions of Windows as well.

  • Upgrading the database from Oracle 8.0.6 to Oracle 9.2.0

    Dear SDN,
    We are in the process of upgrading SAP 4.6b to 4.7 R/3 Enterprise.
    Source Release:Windows 2000/Oracle 8.0.6/SAP 4.6b
    Target Release:Windows 2000/Oracle 9.2.0/SAP R/3 4.7
    Can anyone help us in explaining the procedure for upgrading the database from Oracle 8.0.6 to Oracle 9.2.0.
    Thanks n Regards ,
    Anantha Raman E.

    Thanks Mr.Mohan
        We tried to upgrade from 8.0.6 to 8.1.7 with the help of Inst Guides from service market place..the thing is we created another oracle home with new DBSID ither than the old DBSID...when we started the migration using 8.1.7 Data migration tool its not responding after the first phase CHECKING THE OLD DATABASE...
    Pls help us in this regard
    Whether we have to migrate or what...

  • Upgrading solaris 10 from solaris 8

    Hi Experts,
    Looking for your advices/suggesstions/recommendations:
    We are going to upgrade our OS from Solaris 8 to Solaris 10. So, I wonder whether we need to apply any patches on DB/application servers/Web servers as well. What will be impact on Application performance?
    Currently we are using :
    OS : SunOS sperfdb01 5.8 Generic_117350-25 sun4u sparc SUNW,Sun-Fire-15000
    DB : Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
    (Patch 6646842 applied on Fri Oct 17 08:07:50 BST 2008)
    Apps : Oracle Applications : 11.5.9 ; OAS 9.0.4
    Web Server : OAS 10.1.2.02
    Regards,
    Edited by: biswachk on 28-May-2009 09:17

    After the upgrade, you will need to relink Oracle and Apps binaries. For relinking Oracle binaries for the database home, see MOS Doc 444595.1 (Is It Necessary To Relink Oracle Following OS Upgrade?)
    For Apps installs, Oracle provides scripts in 806_ORACLE_HOME/bin (adlnk806.sh) and iAS_ORACLE_HOME/bin (adlnkiAS.sh) to relink binaries.
    You will also need to run adadmin to relink all Apps executables and regenerate forms and reports.
    As always, test, test, test and verify before touching production.
    HTH
    Srini

  • Migrate and Upgrade ReportServer database from SQLServer 2012 to SQLServer2014

    Hi,
    Today I migrated one reporting service from sql server 2012 to new server which running sql server 2014.
    Firstly I  back up encryption key and restored to new server, then follow the https://msdn.microsoft.com/en-AU/library/ms156421.aspx (e.g. backup, restore reportserver). In section "How to Configure the Report Server Database Connection" , I
    cannot pass this step as it complains it is not a report server, please see error below:
    However I can see my original reports/data srouces in below url and I can create new items like data source:
    http://sydwt-ssql-1/ReportServer
    http://sydwt-ssql-1/Reports/
    Anyone knows what happened?
    Here are the version information:
    - From
    Microsoft SQL Server 2012 (SP1) - 11.0.3412.0 (X64) 
    Mar  2 2014 01:25:09 
    Copyright (c) Microsoft Corporation
    Enterprise Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
    - To
    Microsoft SQL Server 2014 - 12.0.2480.0 (X64) 
    Jan 28 2015 18:53:20 
    Copyright (c) Microsoft Corporation
    Enterprise Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
    Thanks,
    Albert

    Hi
    As Alberto’s post, it's not supported to run a Windows Server Update Services (WSUS) database on SQL Server 2012 in Server 2008 R2. Since your application requires SQL Server 2012 Express as a minimum, you can try the following method:
    1. WSUS in Server 2012 supports SQL Server 2012, if you want to upgrade WSUS database supports SQL Server 2012, you need to upgrade WSUS 3.0 SP1, operation system and so on. For more information, you can post the question about WSUS in the
    Windows Server forums. It is appropriate and more experts will assist you. In addition, upgrade SQL Server 2005 to SQL Server 2012, as Shanky’s post, you need to make sure that your SQL Server 2005 has been applied Service Pack 4.
    2. However, if you don’t want to upgrade WSUS database from SQL Server 2005 to SQL Server 2012, I recommend you to install a new instance of SQL Server 2012 on Windows Server 2008 R2.
    In addition, before installing SQL Server 2012 or upgrading to SQL Server 2012, your system should meets the following prerequisites:
      • The Windows Installer service must be running.
      • Microsoft .NET Framework 3.5 SP1 and .NET Framework 4.0 are required.
      • Windows PowerShell 2.0 or later is required if you're upgrading the database engine.
    For more information about the prerequisites for installing SQL Server 2012, please review the following link:
    Hardware and Software Requirements for Installing SQL Server 2012:
    http://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx
    Thanks
    Lydia Zhang

  • In-place upgrade of Enterprise Manager for RAC databases is not supported

    upgrading 2 node RAC from 10.2.0.1 to 10.2.0.3 on Windows 2003 64 bit. I got the following:
    In-place upgrade of Enterprise Manager for RAC databases is not supported in this release
    Now I cannot log in to the database control as sys with sysdba role . I get "invalid username/password" error
    I can login as a dba user
    I also get a java error after I log in, some thing about class not found, but then I'm in and I can do everything that I try, although I haven't tried scheduling a backup yet
    Can I upgrade EM to 10.2.0.3?
    If so, how?

    On the patchset readme...
    11.3 Upgrade of Oracle Enterprise Manager Not Supported
    When you start Oracle Database Upgrade Assistant to upgrade 10.2.0.1 database to 10.2.0.3 patch set, the following error occurs:
    Inplace upgrade of Enterprise Manager is not supported for RAC databases is not supported in this release
    Workaround:
    Ignore warning.
    If you drop and recreate the EM repository?
    1). emca -deconfig dbcontrol db repos drop
    2). emca -config dbcontrol db -repos create
    Be careful, doing this put the database on QUIESCE mode.
    Regards,
    Rodrigo Mufalani

  • Upgrading Siebel Enterprise Config (siebns.dat)

    Hi all!
    We're doing a Siebel 7.8 to 8.2 upgrade and I'm looking at 'upgrading' the Enterprise config on the new Siebel 8 environment.
    Is there an 'easy' way to migrate the siebns.dat config from a 7.8 environment to an 8.2 environment? That is, replicate the custom components, component config, server allocation etc that's in an existing 7.8 environment to a new 8.2 environment.
    I was expecting a tool that, like the Repository Merge process, took a standard 7.8 SIEBNS.DAT, a standard 8.2 SIEBNS.DAT, my customized 7.8 SIEBNS.DAT and produced a customized 8.2 SIEBNS.DAT.
    I've had a mess around with cfgmerge.exe, but that doesn't quite do what I want!
    I really don't want to sit and write server manager scripts to manually apply the changes - it's a bore and there's a good chance I'll introduce errors or typos in the config. I'll also have to write seperate scripts for Dev, Test, Pre Prod and Prod as they all have different physical configuration.
    Thanks in advance for your thoughts! :)
    Oli

    Hi Oli,
    cfgmerge is the tool Robert mentioned. As you noted it is limited in it's output.
    One way is to use nsbrowse, a gui Siebel utility, that will read the siebns.dat directly or via namesrvr. It is located in siebsrvr bin and gtwysrvr bin dirs. This will be slow and cumbersome to find all the details and differences, but is easiest for you to quickly look at compgrp compdef named susbsytems etc... It will not tell you all of which values are default vs changed, but you can get majority of the changes and params via comparing two env. You cannot update params with this util only read what has been set.
    I have perl script that reads name server and dumps all info from siebns.dat for a single enterprise to csv files. Basically it reads a specific enterprise and spools out info from each object level, compgrp, compdef, servers, named subsystem, params and lists what level the param is set for each comp and server. Depending on number of servers and configuration, this takes hours to execute, and hours to parse through the params.
    As Robert mentioned, make notes of all changes and you can script a rebuild of your entire siebns.dat.
    hth
    -w
    So unfortunately there is no easy way to do this and get a thorough list of changes.

  • Any known issues on upgrading SAP Netweaver from 7.0 EHP1 SP5 to SP6

    Hi All,
    Please let me know the implications after upgrading our portal from 7.0 SP19 to SP21 and also Netweaver ABAP stack from BW 7.0 EHP1 SP 5  to 7.0 EHP1 SP6.
    Thanks & Regards,
    Sowmya
    Edited by: Sowmya B on Apr 15, 2010 2:27 PM
    Edited by: Sowmya B on Apr 16, 2010 6:44 AM

    Hi Experts,
                     We're in the process of upgrading SAP NW 7.0 EhP1 SP3 to SP10 using Enterprise Portal. I download the all the patches MOPZ  via in Solution Manager System. NW 7.0 EhP1 SP10 Related patches successfully downloaded. But i didnt get
    Enterprise Portal related patches for Example.
    sap.com/CAF-KM.SCA
    sap.com/EP-PSERV.SCA
    sap.com/EP-WDC.SCA
    sap.com/EPBC.SCA
    sap.com/EPBC2.SCA
    sap.com/KMC-BC.SCA
    sap.com/KMC-CM.SCA
    sap.com/KMC-COLL.SCA
    sap.com/LM-PORTAL.SCA
    sap.com/NET-PDK.SCA
    sap.com/RTC.SCA
    sap.com/RTC-STREAM.SCA
    sap.com/SAP-EU.SCA
    sap.com/SAP_BUILDT.SCA
    I serached through SMP,  But I am getting  NW 7.00 releated patches, But our current running pathes NW 7.0 EhP1 SP03 upgrade plan for SP10. Please How to download the Those Patches.  Thanks for All.
    Thanks,
    Selva

  • TS1363 I was upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7.  The iPhone hung.  It is no longer visible by iTunes on Win 7

    While upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7, the iPhone hung.  I could not get iTunes to find it and Win 7 does not see it.
    When I connect the iPhone to the USB, Win 7 issues the welcome sound, but that is it.  The same happens when I disconnect iPhone.
    The Devise Manager has the Apple Mobile Device USB Driver correct without any problem.  I updated this driver called usbaapl64.
    The iPhone is still hung.
    I restarted the iPod service
    I restarted the Apple Mobile Device Service
    I tried to empty and delete the temp directory in C:\users\myname\AppData\Local\ but could not
    The iTunes I am using is the latest version
    I updated the Apple Mobile Device Driver as stated above correctly
    The iPhone is still hung and is not recognized by Win 7 or iTunes, so I cannot restore the OS to the previous working version
    What else can I do to restore the previous working OS on my iPhone 4

    I was connecting the iPhone 4 to a USB 3.0 port.  I was told by Apple Express Support (at US$29.99) not to use USB 3.0 and to use USB 2.1 instead.
    If you are connecting your iPhone to the computer using a USB 3.0 port, disconnect it immediately.  iPhones will lock up if you try to update while  using a connection through a USB 3.0 port.
    Disconnect the iPhone from the computer
    Go to Device Manager and find the connected USB port.  Click the mouse right button and update the driver
    Shut the iPhone by pressing the sleep button and the home button concurrently for some time
    Move the USB cable to a USB 2.1 port or older without the iPhone.  
    Restart iTunes.
    Connect the iPhone
    Your computer should recognize the phone and reloads the correct USB 2.1 driver (Apple Mobile Device)
    Then iTunes should recognize the iPhone and starts reloading the firmware.
    When that is complete it may ask if you wish to restore, naturally you say YES
    iTunes will restore the iOS
    Using iTunes, restore the latest backup to get your data back.
    When all of the above is completed.  Start enjoying your iPhone.
    If the above does not work.  Throw your iPhone out of the window and get a replacement Android phone.

  • I upgraded MacbookPro 2009 from 10.6.8 to Yosemite.  Beforehand I made a backup copy of my Iphoto library onto an external hard drive. Lets call it BU. I also deleted half of my photos from the default library on my laptop, lets call it DE. I then in

    I upgraded MacbookPro 2009 from 10.6.8 to Yosemite 2 weeks ago. My iphoto is now a nightmare. i went to our local apple retailer but they could not help either. Perhaps someone can help. Beforehand the OS upgrade I made a backup copy of my Iphoto library onto an external hard drive. Lets call it BU with 50GB. I also deleted half of my photos from the default library on my laptop, lets call it DE, now with about 20GB, to gain space. I then upgraded to Yosemite.
    I have also installed since a long time Iphoto Library Manager 3.8.6. (this may be the cause of the problem as it was not upgraded and perhaps thus not compatible with iphoto 9.6 which I have now after the upgrade to Yosemite) It all worked fine before the upgrade, switching in iphoto between the two libraries DE and BU.
    It also worked fine after the upgrade for a few days. At one stage Iphoto asked me to upgrade the iphoto version as it otherwise could not read the photos when I tried to load the BU library into iphoto. I did click yes to upgrade iphoto. As a result I became a brand new but totally empty library, no photos.
    BU was still on the external disc, however the "Master" file was empty. We fortunately discovered all photos were in another file called Old Master, also under BU. We made another copy of the Old Master file onto the external disc. Lucky we did, because shortly afterwards we could not open anymore the BU file thus had no access to anything in there. Now I have 17000 photos in a file called Old Master on my external disc and another smaller library  DE on my laptop. When I tried to import the photos from Old Master into a new iphoto library it was very messy. All events dates were mixed up, many photos were imported twice. I have no idea whether all my 17000 photos have been imported.
    Can anyone suggest what is the most time efficient way? How do I best import my 17000 into a new library ensuring I don't loose any in the process. I do not wish sorting through 17000 photos for a week or so. Shall i also get a new iphoto library version now? Thank you for anything that may work.

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • Upgrade ONS15454 MSTP from 7.0 to 9.8

    Hi all
    I would like to some help that customer need to upgrade ONS15454 MSTP from version 7.0 to 9.8. So, I may need some help
    1. how to upgrade it ?a
    2. Is it possible to direct upgrade to 9.8?
    3. I saw many file information in cisco web site, and which one i must to download it ? ( ONS 15454 R9.8.0 System Software for MultiService Transport Platform, ONS 15454 R9.8.0 System Software for Multiservice Transport Platform - Lite Version for TCC2P/TCC3 -WSON) I do not know which one is to using
    4. what should i know that my card support version 9.8? In my idea, i think it should be support but i may need confirm or information from this before. (my card have OSC-CSM, OPT-PRE, AD-2C, MXP-10DME and TCCP2)
    5. Have any interrupt between upgrade ? and Is it upgrade in each TCCP2? because that may help when card reset or reboot. And the traffic still flow to another TCC2P.
    Thanks
    V

    1. I try to using your upgrade tool, my ONS15454 is SDH version 7.0  so, I can choose only 9.3 for destination version. It means that i must  to upgrade to 9.3 first and then go to 9.6 and 9.8, Correct?
    yes it is true you go directly to 9.3.0, it is not a multi-shelf node.
    please be sure that your software version is 7.0.0.
    So upgrade path is 7.0.0 to 9.3.0
    2. Is  it possible to upgrade without downtime ? as my understand that  ONS15454 have 2 site (east and west), Can i do upgrade east site before  west site? and when finish upgrade east site and go to upgrade west site  after that, can i ?
    becase as i understand when finish upgrade  per site all card in that site will reboot, so, i think that another  site will take the traffic without downtime. I don't sure that i am  correct or not if you have any mention please let's me know
    no not possible without downtime,
    there will be a traffic hit or 10seconds or less than that, it you are using MXP_MR_2.5G cards without Y-cable protection. same for GE_XP cards there will be a traffic loss for few seconds.
    yes you can upgrade east node and after that upgrdae west node, but not like doing upgrade to 9.8 for one node and another still on 7.0
    3. I don't have multishelf, i just have one shelf per site
    4.  I have plan to upgrade to customer soon, but i may need to give a plan  for them. But right now, i may confuse about the way and solution to  upgrade that include how and impact to upgrade.
    1. There will be a traffic impact on MXP and GE_XP card for less than 10 seconds.
    2. If MXP client ports are y-cable provisioned, than upgrade will be error less, in case of Y-cable protection just lock protection before proceeding to upgrade.
    3. traffic will impact as MXP cards have to do FPGA upgrade also and for this they will take a reboot, but in case of y-cable other card is taking over.
    4. As you have TCC2P card, so always select lite versions, if its SDH than SDH-DWDM.
    5. also if possible, arrange spare TCC2P card, atleast one at each site, just to be on safe side.
    6. here is the path which you have to follow:
    7.0.0 to 9.3.0
    9.3.0 to 9.6.0
    9.6.0 to 9.8.0
    also please feel free to reach for any queries.

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • Issues after upgrading the Obiee from 10g to 11g

    Hi all,
    We have recently upgraded our rpd from 10g to 11g. And a part of Webcatlog is being upgraded. We observe issues with the upgraded reports.
    As the for the report prompts the script was taking lot of time. And the browser pop's a message either to 'stop' or 'continue'.
    The report is taking lot of time to run than the usual 10g environment. And the path BP1 is also applied for the 11g environment.
    Please suggest a troubleshoot method to overcome the issues with the upgraded reports.
    Thank you,
    Chris.

    Check this pdf file
    http://www.rittmanmead.com/files/biforum2012/ranka_performance.pdf
    If helps pls mark

Maybe you are looking for