UPK V11.0 Issues recording SAP GUI

Hello,
I am using the multi-license of UPK v 11.0 attempting to record the back-end of SAP (the GUI). When I go to record (both in manual and automatic), I run into a progress delay. For example, I was recording a transaction in SAP and it literally took 5 minutes to record one slide. This does not appear to be a problem in other applications such as word, etc.
I have cleared my cache, I have cleared my target applications excluding the SAP apps and I have increased my disk storage to a 1GB. I had a peer also attempt the recording and ran into the same issue. I am using a Dell Latitude E6410. My instructor during UPK also witnessed this and told me to reach out to the community.
Any suggestions on UPK recording for SAP GUI v7.20?
Regards,
Joy

Hi,
Just wondering whether you have resolve this issue? If yes, how do you resolve it? Can it be share?
We are facing the same issue on recording, which it took very long.
BTW, do you also face any issue on version mismatch eventhought UPK v11 and SAPGUI7.20 installed during the recording?
Thanks

Similar Messages

  • Username and password issue in SAP GUI logon-Please help

    Hello,
    Usually I download the tx.sap file from my work system it downloads and opens the main screen directly.( password is disabled for us). Now when I connect from home(home system through VPN) ,i can download tx.sap file from my company's SAP web portal ,but when I open the same through SAP GUI on my system it pops up a password screen- the issue is my employee ID is already populated in the username tab, but when I provide my domain password (i tried all my passwords),it throws an error -you do not require a password, now when i try without a password it shows fill in all required entry fields. Please assist.

    If you enter just the username, the network is not sure which "AD Domain" to contact tp authenticate you as a user. So you need to specify the domain name in any of the below 2 formats. Give it a try.
    Format 1 - [email protected]
    Format 2 - DOMAIN\UserName
    Hope this helps.

  • Issue in SAP GUI 7.0 for ECC6 (ABAP Editor not working)

    Dear SAP Team,
                             We have installed SAP ECC6.0 EHP4.We have installed SAP GUI 7.0 in our clients machine but in some machines the ABAP Editor i.e Tcode SE38 is not working properly.When our Client selects any transaction for editing the system gets HANG.
    We have tried uninstalling & reinstalling the software & the patch but the problem still persists.The configuration of all our client machine are same & we work on Windows XP platform.Please help us in solving our issue as soon as possible.
    Thanks & Regards,
    Manoj Mhatre.

    Dear Manoj
    you mean the SAP Gui for windows 7.20 or 7.10?
    Please install the latest Sapgui Patch 3 for the Sapgui 720, or the Sapgui
    Patch 19  for the Sapgui 7.10.
    As workaround, please use the OLD  frontend editor.
    Best regards,
    Sven

  • Issue with SAP GUI 7.30 launching with users upgrading from 7.10

    We started rolling out SAP 7.30 GUI Final 7300.3.7.117 out to people, and we've ran into this error with people who had upgraded from SAP GUI 7.10.
    Our environmental variable uses saplogon.ini (SAPLOGON_INI_FILE) and points to c:\windows\saplogon.ini
    I don't know why the program is trying to search for saplogontree.xml.
    I've tried uninstalling, rebooting, reinstalling. Deleting some of the %appdata% SAP folders.
    I need some guidance as people who upgraded from GUI 7.20 do not run into this issue.

    This popup would make sense Jason,as the path C:\Windows\SapLogonTree.xml would not be a valid path to this file.
    Really, 7.10 should not have been used at all as an upgrade path as this had finished support in 2009
    If you have a small number of users with 7.10, it's recommend to remove it via add/remove programs in the OS, then install a clean 7.30 gui.
    The environment variable should not point to C:\Windows\ at all since this is a restricted folder in
    Windows Vista and higher, and will only cause further trouble later on in the updates
    See note http://service.sap.com/sap/support/notes/1409494
    Jude

  • ECATT/TCD(Record) SAP GUI 6.20

    Hi All,
    I hope is threre anyone to help me in my problem.
    I use TCD(Record) to record entries in Transaction OAAD to archiving .pdf documents. I use the SECATT transaction and I work in BC-TWB-TST-ECA. I use the test script record for the Z_OAAD Transaction step by step as in the eCATT Documentation. (I mean the example with the FK01 Transaction code). As I made the record I have to load my .pdf file from a local path on my C partition. At the end of the recording I got my archiving document without any errors. When I restart the record I got an "Abord by the user" and I didn't find any record in the structure editor for the input path of the document. I mead, I expected an input record like under CATT, SALOPM0105 The Input FrontendPath.
    How is posible to load a document with eCATT?

    Hi Vishal,
    thank you very much for your advice. I thought that the problems:-) are already solved. I forgot to say I have the SAPKB62052. But unfortunately, it's still buggy. I can test the same record with another SAP system (4.6B) and there I have no problem.
    I've seen some changes in the program that I use and I really didn't understand. I think here begins my problem:
    The FUGR OPTM (4.6B), Dyntro 0105 it was replace with
    PROCESS BEFORE OUTPUT.
    MODULE OUTPUT.
    PROCESS AFTER INPUT.
    MODULE FILENAME.
    PROCESS ON VALUE-REQUEST.
    *  field sapb-sapinpath module helpfile.
       FIELD SAPB-SAPPOOLINF MODULE HELPFILE.     " Corr. 4.0b am
    The same FUGR OPTM, Dynpro 0105 (6.20)
    PROCESS BEFORE OUTPUT.
    MODULE OUTPUT.
    PROCESS AFTER INPUT.
      field data_0105-filename module filename on input.
      field data_0105-filename module input.
    PROCESS ON VALUE-REQUEST.
      field data_0105-filename module helpfile.
    I'll take a break now, and I hope I'll have a nice weekend to forget the SAP problems.
    Thanks again for your answer and have a nice weekend too.
    Best regards, GP

  • SAP GUI with SNC logon and Hummingbird Exceed - SAP GUI window size issue

    We have discovered an issue when SAP GUI 7.10 is used to logon via SNC and Hummingbird Exceed is used on the same workstation to logon to a UNIX system either via x-windows or telnet.
    When the user logs onto a UNIX system using Hummingbird Exceed, then uses SAP GUI to logon to a SAP system with SNC authentication, the SAP GUI authentication works, but the favourites list is not fully displayed and has to be resized before any of the entries are available.
    Has anybody else seen this issue, and do they know if there is a fix available ? We wondered if there might be an issue with fonts or some other sort of conflict between Exceed and SAP GUI, but it is strange that the problem only occurs if SNC authentication is being used, and when userid+password is used to logon to SAP the problem does not occur.
    Cheers,
    Tim

    Hello Tim and Wolfgang,
    I was curious too as I found it interesting... so I tested a few combinations, but could not reproduce what Tim has described, at least not before my CPU reached 100% and the applications stopped responding (~2GHz processor, 1GB RAM, 48 kbps connection, latency ~ 2 x width of the Pacific Ocean, but Backend 7.00!).
    However I did notice some indications which might be a help (based on 7.00!):
    Back in 4.?? there was a problem in that large menus could not be searched(!). Sorry, I don't have access to SAP now, but from memory the note # was 444043 (or very similar) and introduced a form routine for large menus - from a printscreen I still have the message number which led me to the note - 'I476(S#)'.
    The system certainly distinguishes between MENU_TYPEs and the above note corrections could be found in several locations relating to the SAP menu 'S', the role menu 'A' etc, but I could only see that for favourites 'F' this is implemented for the menu search (when searching, not when loading).
    @ Tim: Ask you customer to create a favourites menu which only has 1 node or max 2 (certainly not more than 4!) and ~ 20 executable objects in it (not more than 30!)? Can they under any conditions achieve the described problem with such a menu?
    If not possible to reproduce, then the closest I could guess is a maximum limit of 4 nodes and max 30 objects for a 'F'avourite menu, before it is a minimum candidate for "performance problems" and consideration to be converted to a role ('A'ctivity group) menu instead.
    Sorry that I can only help by speculating, because I could not reproduce what you have described.
    Hopefully this problem will not happen to me in the New Year, and hope you will solve it for the rest of the year
    Cheers,
    Julius
    Updated memory (not RAM) by: Julius Bussche on Jan 3, 2008 9:07 AM

  • SAP GUI Compatibility issue with Windows 2008R2 64 Bit

    Hi Gurus
    Is anyone experienced connectivity issue with SAP GUI (32bit)  on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
    to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
    Your inputs greatly appreciated.
    -giri

    Hi Giri
    Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
    Refer the SAP Note  66971 - Supported SAP GUI platforms
    BR
    SS

  • SAP GUI Install Issues on computers using VISTA

    Installed SAP GUI many times on Windows XP computers, but having issues on your new VISTA system?
    There are two major issues for SAP GUI on VISTA, here is an overview of how to solve them:
    1. The unzipping wizard native to VISTA is lousy. Download the WinZip demo (www.winzip.com) or one of many free archiving tools. Make sure to unzip the SAP GUI file WITH FOLDERS. Use Windows Explorer to drill down through the unzipped GUI as shown. Double click SapGuiSetup.exe to start your installation...
    2. The saplogon.ini file MUST be placed in the SAP GUI installation folder, not into C:\Windows.
    The folder is:
    C:\Program Files\SAP\FrontEnd\SAPgui
    or for 64bit:
    C:\Program Files (x86)\SAP\FrontEnd\SAPgui
    Restart SAP GUI to properly display your server list. Contact your Hosting Center if you continue to have issues. Our email is sap at csuchico.edu

    Troy -
    There is also this link recently which may be of help.
    SAPgui 720 PL1 upgrade causing IE 7/8 issues
    Running this resolved that users issue.
    C:\Program Files\sap\sapsetup\setup\"sapregsv.exe mshtml.tlb"
    In your case it may be under the x86 folder since you are 64bit.
    C:\Program Files (x86)\sap\sapsetup\setup\"sapregsv.exe mshtml.tlb"
    Regards,
    Zecher

  • SAP GUI 7.10 Compatibility with ECC6 EHP4

    Hello,
    My company is on SAP GUI 7.10 Patch 8 and we are looking to install EHP 4 on our ECC6 system. Can someone tell me if we need to apply the latest patch to SAP GUI for EHP 4 support?
    Does anyone know if there are known issues with SAP GUI 7.10 Patch 8 and EHP 4 if we do not patch?
    Thanks,
    Pete

    Hello,
    We did not find any issue with this, hope all goes well with you.
    Thanks,
    Prasant K Paichha

  • Installing SAP GUI on windows using Bootcamp on (MACBook)

    HI SDN,
    I am looking forward to buy MACBook.
    Please provide your suggestions on installing SAP GUI on windows using Bootcamp on MACBook?
    Are they any issues installing SAP GUI on Mac machine on Windows
    OS?
    Running Bex Queries, any excel integration issues while running BEx reports on Mac machine with windows Bootcamp?
    I really appreciate if you can forward any related information .
    Thanks
    (Full points will be awarded for helpfull answers)

    Hi,
    [SAP Mac Users Forum|iPhone & iPad Application Development;  is right place for this question

  • Critical Error in SAP GUI 7

    Hi gurus,
    I am executing one query, that query is executing fine in  SAP 3.x frontend , but when i am executing the same query in SAP GUI 7.0,  it is throwing up the error as :
    " A critical program error has occured.
    The program will now terminate.
    Please refer to the trace for the further information."
    Please help what could be the issue with SAP GUI 7.0.

    Generally, this kinds of error was caused by imcompatiable of 3.5 and 7.0, especially for the query with variable or something else.
    Install the latest patch may helps.
    Or try to copy your query and migrate it to 7.0 or simply create a same query in 7.0

  • SAP GUI 7.20 vs Business Objects Enterprise SP3

    Hi all,
    Does anybody know if BOE XI 3.1 SP3 supports SAP GUI 7.20???? I read the doc and it doesnt says so...but i think it should support it....

    Supported means that this was tested when SP3 was released and that if you run into issues using SAP GUI 7.20 combined with BO then you should expect support from SAP.
    I believe that SAP GUI 7.20 was released later than BO XI 3.1 SP3 so I assume this is the reason why there is no support statement.
    I would recommend to open an OSS message by SAP support (http://service.sap.com/message) and ask if there is a plan to support SAP GUI 7.20. Personally  I count with a supportability statement for the next XI 3.1 serivice pack.
    SAP GUI 7.20 may work with the BO products but until SAP officially supports it you are working at your own risk with this configuration.
    Regards,
    Stratos

  • SAP GUI issue with Portal on Windows Vista

    Hello.  I am using Windows Vista on my laptop.  We use the portal to access our SAP systems.  I have SAP GUI 7.1 installed on my machine.  When I click my WIN GUI link from inside the portal I get a download file request.  I download the file, however I have to click on the WIN GUI link a second time for the GUI to actually open  I am using IE 7.0 as well.
    Please advise if you know how to resolve this issue.
    Thanks,
    Stuart

    try installing patch 5 for  SAPGUI from ftp://ftp.sap.com/pub/sapgui/win/710/patches/

  • SAP Gui 730 issue with crobu theme

    Hello Frineds, Our developer team is facing some strange issue. They are able using corbu theme in SAP GUI 720. but after the new SAP GUI 730 implementaion, they are not able to use this theme. Checked all the notes etc, but its not clear on themes part.  Any one faced this kind of issue or any suggestions. Thanks in advance. Regards Munish

    Hi Munish,
    Can you raise this in ABAP community ?
    Also, to help you further can you drill down to some more relevant information ?
    As far as one can understand, it's a rendering problem with SAP GUI 730.
    This can also be compatibility issue with your kernel and application.
    I would suggested you to check all above options.
    Regards,
    Divyanshu

  • SAP GUI EDITOR issue

    Hello Experts,
    I am having some issue in the SAP GUI editor.
    Whenver I open the SCREEN painter. It opens in line editor with error "EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'"
    My graphic layout editor option is checked.
    The Component version is SAP EHP 1 for SAP Solution Manager 7.0
    GUI version is 640
    My other box whose component version ECC 6.0. There editor is opening in the Graphical format.
    kindly help.
    Regards,
    Hema

    Hello,
    This is version compatibility issue. You can talk to BASIS administrator and get the lastest SAP GUI installed.
    Thanks,
    Augustin.

Maybe you are looking for