Upload long text from excel file into internal table
I need to upload service master(T-code : AC02) data alongwith long text.Now i have data in excel as: Service no(ASMD-ASNUM) and corresponding long text for it.
I am facing problem in getting entire lontext from excel into my internal table.It only takes till 255 characters i think.Any help in this regard woulg be highly appreciable.
hi,
what is the maximum length of your long text.
and you can try with more than 255 chars. in the internal table it will take , if you want check it.
i'm in 4.7 ,5.0 version, what about you ..
please check , you can upload even more than 255.
try
regards
vijay
Similar Messages
-
Reading long text from excel file to an internal table
Hi
Can any body tell me how to read long text from excel file to an internal table.
When i am using this FM KCD_EXCEL_OLE_TO_INT_CONVERT then it is reading only 32 characters from each cell.
But in my excel sheet in one of the cell has very long text which i need to upload into a internal table.
may i know which FM or what logic i need to use for this problem.
RegardsHi,
Here is an example program. It will upload an Excel file with two columns. You could also assign the Excel structure dynamically, but I wanted to keep the example simple. The main point is that the internal table (it_excel in this example) must match the Excel structure that you want to convert.
Remember, this is just an example to help you figure out how to properly use the technique. It will certainly need to be modified to fit your requirements, and as always there may be a better way to get the Excel converted... this is just one possibility that has worked for me in the past.
*& Report zexcel_upload_test *
REPORT zexcel_upload_test.
TYPE-POOLS: truxs.
TYPES: BEGIN OF ty_excel,
col_a(10) TYPE n,
col_b(35) TYPE c,
END OF ty_excel.
DATA: l_data_tab TYPE TABLE OF string,
l_text_data TYPE truxs_t_text_data,
l_gui_filename TYPE string,
it_excel TYPE TABLE OF ty_excel.
FIELD-SYMBOLS: <wa_excel> TYPE ty_excel.
PARAMETERS: p_file TYPE rlgrap-filename.
* Pass the file name in the correct format
l_gui_filename = p_file.
* Upload data from PC
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = l_gui_filename
filetype = 'ASC'
has_field_separator = 'X'
CHANGING
data_tab = l_data_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
* MESSAGE ...
EXIT.
ENDIF.
* Convert from Excel into the appropriate itab
l_text_data[] = l_data_tab[].
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_field_seperator = 'X'
i_tab_raw_data = l_text_data
i_filename = p_file
TABLES
i_tab_converted_data = it_excel
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ...
EXIT.
ENDIF.
LOOP AT it_excel ASSIGNING <wa_excel>.
* Do something here...
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM filename_get CHANGING p_file.
* FORM filename_get *
FORM filename_get CHANGING p_in_file TYPE rlgrap-filename.
DATA: l_in_file TYPE string,
l_filetab TYPE filetable,
wa_filetab TYPE LINE OF filetable,
l_rc TYPE i,
l_action TYPE i,
l_init_dir TYPE string.
* Set the initial directory to whatever you want it to be
l_init_dir = 'C:\'.
* Call the file open dialog without multiselect
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Load file'
default_extension = '.XLS'
default_filename = l_in_file
initial_directory = l_init_dir
multiselection = 'X'
CHANGING
file_table = l_filetab
rc = l_rc
user_action = l_action
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
OTHERS = 4.
IF sy-subrc <> 0.
REFRESH l_filetab.
ENDIF.
* Read the selected filename
READ TABLE l_filetab INTO wa_filetab INDEX 1.
IF sy-subrc = 0.
p_in_file = wa_filetab-filename.
ENDIF.
ENDFORM. " filename_get
Regards,
Jamie -
Uploading excel file into internal table
Hi,
Any function module is there to upload an excel file into internal table in CRM 7.0 system?
Thanks.Hi Ginger,
If u have access to ECC R/3 make use FM 'TEXT_CONVERT_XLS_TO_SAP' source code which is existing to convert to Excel to Internal table. It will work in CRM also.
As of Now I don't have access to SAP S/m. Mean while u can try as above said.
Regards,
Lokesh B -
FROM EXCEL FILE TO INTERNAL TABLE
HI GURU'S,
i'm using the following code to conver the excel file into internal table.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR = 'X'
I_LINE_HEADER =
I_TAB_RAW_DATA = IT_TAB_RAW_DATA
I_FILENAME = P_FILE
TABLES
I_TAB_CONVERTED_DATA = IT_MM01
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
What is the exact format for the to send the Excel File.
My requirement is the Excel file contains the several fields , that should be stored as a records in the internal table
My problem is when i send the data in the excel file as one column, i'm getting all the data in the first column of the Internal Table.
If i send the data in the excel file as a record it is not filling the internal table.
what is the problem??/
if the Excel files contain multiple records is it able to convert the data into internal table records.
Regards,
Adi.**Internal Table to hold the records in the text file
Hello Adi,
Put the fields in excel in the same format in which u want in ur internal table(here record)
U can refer the following code.
data: begin of record occurs 0,
General Data
data element: BUKRS
bukrs_001(004), " Company Code
data element: EKORG
ekorg_002(004), " Purchase Orgn
data element: KTOKK
ktokk_003(004), " Account Group
end of record.
Internal Table
data:it_excel like table of alsmex_tabline with header line.
**SELECTION-SCREEN**
selection-screen begin of block blk.
parameters: p_file like rlgrap-filename default 'c:\vendor_creation.xls'
selection-screen end of block blk.
A T S E L E C T I O N - S C R E E N O U T P U T
***************START*********************** F4 Help for field p_file
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
exporting
program_name = syst-repid
dynpro_number = syst-dynnr
FIELD_NAME = ' '
STATIC = ' '
MASK = ' '
changing
file_name = p_file
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
if sy-subrc <> 0.
message e006(zhnc).
endif.
S T A R T - O F - S E L E C T I O N
start-of-selection.
data : vf_index type i.
data : vf_start_col type i value '1', "start column
vf_start_row type i value '4', "start row
vf_end_col type i value '200', "maximum column
vf_end_row type i value '2500', "maximum row
p_text(20). "stores error messages
*/ Work Area
data: wa_intern like it_excel.
*/ Field symbol
field-symbols : <fs>.
*********Fn Module to convert the excel file data into internal table
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
filename = 'c:\vendor_creation.xls'
i_begin_col = vf_start_col
i_begin_row = vf_start_row
i_end_col = vf_end_col
i_end_row = vf_end_row
tables
intern = it_excel
exceptions
inconsistent_parameters = 1
upload_ole = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if it_excel[] is initial.
p_text = 'No Data Uploaded'.
else.
sort it_excel by row col.
loop at it_excel.
move : it_excel-col to vf_index.
assign component vf_index of structure record to <fs>.
move : it_excel-value to <fs>.
at end of row.
append record.
clear record.
endat.
endloop.
endif.
In case of any problem u can revert back.
Aastha -
Uploading excel file into internal table with field length more than 255
I am trying to upload the data from an excel file through function module 'TEXT_CONVERT_XLS_TO_SAP'.
I have tested by changing the field type from string, and char2000.
But it is accepting only 255 chars from the cell content.
How to get the total content of the field if it is more than 255 char.hi,
you can use any of the following procedures:
For uploading data from excel to internal table refer standard report RC1TCG3Z in se38 :
or
You can use the FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' itself. Please check if you have done it this way . But, this FM can be a little time consuming if the excel has large data, so you can use the FM u2018GUI_UPLOADu2019.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_file1
i_begin_col = l_b1
i_begin_row = l_c1
i_end_col = l_b2
i_end_row = l_c2
TABLES
intern = lt_data
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE e018 DISPLAY LIKE 'i'.
ENDIF.
*---Removing the first heading fields from the file.
IF NOT lt_data[] IS INITIAL.
LOOP AT lt_data INTO lwa_data WHERE row = '0001'.
DELETE lt_data.
CLEAR lwa_data.
ENDLOOP.
*---Inserting the data from file the internal table
LOOP AT lt_data INTO lwa_data.
CASE lwa_data-col.
WHEN 1.
wa_file_wicopa-serial = lwa_data-value.
WHEN 2.
wa_file_wicopa-blart = lwa_data-value.
WHEN 3.
wa_file_wicopa-bldat = lwa_data-value.
WHEN 4.
wa_file_wicopa-budat = lwa_data-value.
ENDCASE.
AT END OF row.
APPEND wa_file_wicopa TO gt_file_wicopa.
CLEAR wa_file_wicopa.
ENDAT.
CLEAR lwa_data.
ENDLOOP.
ENDIF.
ENDIF.
or
DATA: it_test TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE.
DATA :v_start_col TYPE i VALUE '1',
v_start_row TYPE i VALUE '1',
v_end_col TYPE i VALUE '256',
v_end_row TYPE i VALUE '65536',
v_text TYPE repti.
* Funtion Module to upload values from excel to the Internal table
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_file
i_begin_col = v_start_col
i_begin_row = v_start_row
i_end_col = v_end_col
i_end_row = v_end_row
TABLES
intern = it_test
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Or
You can use FM u201CTEXT_CONVERT_XLS_TO_SAPu201D.
DATA : i_raw TYPE truxs_t_text_data.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_field_seperator = 'X'
i_tab_raw_data = i_raw
i_filename = p_path
TABLES
i_tab_converted_data = itab
EXCEPTIONS
conversion_failed = 1
OTHERS = 2
hope it will help u
regards
rahul -
Not uploading more than 150 rows from Excel file to Internal table.
Hi All,
We have a Z program to upload initial stock from excel file to SAP using BAPI. The problem is we have defined row to '65536'. But it is not uploading more than 150 rows at a time. The piece of code is given below.
DATA : it_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
DATA: xcel TYPE TABLE OF alsmex_tabline WITH HEADER LINE.
DATA : gd_scol TYPE i VALUE '1',
gd_srow TYPE i VALUE '3',
gd_ecol TYPE i VALUE '256',
gd_erow TYPE i VALUE '65536'.
PERFORM upload_excel_file TABLES gt_out
USING p_file
gd_scol
gd_srow
gd_ecol
gd_erow.
FORM upload_excel_file TABLES gt_out
"Insert correct name for <...>
USING p_p_file
p_gd_scol
p_gd_srow
p_gd_ecol
p_gd_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
DATA : ld_index TYPE i.
FIELD-SYMBOLS: <fs> TYPE ANY.
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename = p_p_file
i_begin_col = p_gd_scol
i_begin_row = p_gd_srow
i_end_col = p_gd_ecol
i_end_row = p_gd_erow
TABLES
intern = lt_intern[].
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF lt_intern[] IS INITIAL.
FORMAT COLOR COL_BACKGROUND INTENSIFIED.
WRITE:/ 'No Data Uploaded'.
EXIT.
ELSE.
SORT lt_intern BY row col.
LOOP AT lt_intern.
MOVE lt_intern-col TO ld_index.
ASSIGN COMPONENT ld_index OF STRUCTURE gt_out TO <fs>.
MOVE lt_intern-value TO <fs>.
AT END OF row.
APPEND gt_out.
CLEAR gt_out.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM.
Plz tell me, what is the problem here. I want to upload all the rows at a time.
Thanks,
With regards,
Rosaline.Hi Rob, I confirm, you're nitpicking! :-D For information, I've noted a few SAP comments about releasing and released objects, for people who like reading: [SAP Library - Documenting and Releasing a Function Module|http://help.sap.com/saphelp_nw70/helpdata/en/d1/801f50454211d189710000e8322d00/frameset.htm], [Note 109533 - Use of SAP function modules|https://service.sap.com/sap/support/notes/109533], [Note 415983 - Modification/customer developments of SAP function modules|https://service.sap.com/sap/support/notes/415983]; Example of an unreleased BAPI -> [Note 577453 - Using BAPI BAPI_DELIVERYPROCESSING_EXEC|https://service.sap.com/sap/support/notes/577453]
Sandra -
Upload data from flat file into internal table
Hi friends,
I want to upload the data from a flat file into internal table , but the problem is that all the columns in that flat file are seperated by "|" character instead of tabs.
Plz help me out.........HEllo,
DO like this.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILENAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X' " Check here
* HEADER_LENGTH = '1'
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = IT_COJRNL
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
VAsanth -
How to transfer data from excel files into z-tables
Please help me with a code which transfers data from excel file to z-table.
Thanks in advance
ShuvirHi Daniel,
Export Data
Purpose
Use this procedure to export SAP data to a local file such as Microsoft Excel.
Menu Path
Use the following menu path to begin this process:
· SystemèListèSaveèLocal File
Helpful Hints
When reviewing fields, R = Required, O = Optional and C = Conditional.
Procedure
1. Start the transaction using the menu path or transaction code.
Whatever Data You Want to Export
2. Select SystemèListèSaveèLocal File. This works well for any data in SAP. This is the only option for the top-level (first page) of a report.
In a drill-down view within a report the Local File button on the toolbar may be used and has the same options.
Choose File Format
3. Click .
4. Click to continue. If prompted for a format after choosing Spreadsheet, select Excel Table to get an Excel file that can be modified more easily.
Choose File Save Location Step 1
5. Click to the right of the Directory field to choose a different location.
Choose File Save Location Step 2
6. Click or browse your computer to locate the directory where you want to save your file.
7. Complete the following field:
· File name:
You must add the proper file extension to the name of your file (.xls for Excel, .rtf for Rich Text, .html for HTML). The file extension tells your computer what program to open the file with. If you do not have the file extension at the end, you may not be able to open it.
8. Click to continue.
Generate File in Location and Format Selected
9. Click to create the file in the location and format selected. In this example the file was named "example.xls" and saved on the desktop.
Result
You have completed the export process.
thanks
karthik -
Uploading data from a particular column of a particular sheet from an excel file into internal table
Hi,
I have to upload data in the first coulmn of 7th sheet of an excel file.
Can anyone please help me on this.
This link works perfectly fine for excel files without Macros.
Read multiple sheets of an Excel file into SAP through ABAP - Code Gallery - SCN Wiki
But my excel file has some macros.
And after the macro enable/disable popup is cleared, the system freezes.
Can someone pease help me on this abd tell me an approach different from the one in the above link?Welcome to SCN
Please search before you post next time:BDC, upload data from multi excel sheets -
Upload openoffice excel file into internal table
Hi Everyone,
I have a requirement where in we need to upload vendor master data into SAP.
The data is available in excel format. But the excel sheet was created in openoffice s/w and client is not allowing
us to install MS-Office so that we cut and paste the data by creating anexcel file.
Now there is an option of saving the excel file in openoffice s/w as MS-Excel 95 format with .xls extension.
But since we are saving this in openoffice enivoronment the FM ALSM_EXCEL..... data is not improting this excel file into
Did somebody faced this issue before. Pls share the approach to solve this issue.
Regards,
VinayHi !
you can use the Function module TEXT_CONVERT_XLS_TO_SAP to upload xcel file to internal table
please go through the code below.
REPORT zupload_excel_to_itab.
TYPE-POOLS: truxs.
PARAMETERS: p_file TYPE rlgrap-filename.
TYPES: BEGIN OF t_datatab,
col1(30) TYPE c,
col2(30) TYPE c,
col3(30) TYPE c,
END OF t_datatab.
DATA: it_datatab type standard table of t_datatab,
wa_datatab type t_datatab.
DATA: it_raw TYPE truxs_t_text_data.
At selection screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
*START-OF-SELECTION.
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw " WORK TABLE
i_filename = p_file
TABLES
i_tab_converted_data = it_datatab[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
WRITE:/ wa_datatab-col1,
wa_datatab-col2,
wa_datatab-col3.
ENDLOOP.
hope this will help you.
Regards,
Kiran -
How can i read local excel file into internal table in webdynpro for abap a
Could someone tell me how How can i read local excel file into an internal table in webdynpro for abap application.
thank u for your replyDeep,
File manuplations...............................
1. At the presentation level:
->GUI_UPLOAD
->GUI_DOWNLOAD
->CL_GUI_FRONTEND
2. At the application server level:
->OPEN DATASET : open a file in the application server for reading or writing.
->READ DATASET : used to read from a file on the application server that has been opened for reading
-> TRANSFER DATASET : writing data to a file.
-> CLOSE DATASET : closes the file
-> DELETE DATASET : delete file
If file is on the local PC,use the function module GUI_UPLOAD to upload it into an internal table by passing the given parameters......
call function 'GUI_UPLOAD'
exporting
filename = p_file
filetype = 'ASC'
has_field_separator = '#'
tables
data_tab = t_data
p_file : excel file path.
t_data : internal table
<b>reward points if useful.</b>
regards,
Vinod Samuel. -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
Uploading EXCEL file into Internal Table Using GUI_UPLOAD
Can any one please give me an example use of FM "GUI_UPLOAD" which to upload a EXCEL file????? (not .txt)
Use the forum search option [GUI_UPLOAD FOR EXCEL|https://forums.sdn.sap.com/search.jspa?threadID=&q=GUI_UPLOADFOREXCEL&objID=c42&dateRange=all&numResults=15&rankBy=10001]) or sdn wiki/code gallery ([UPLOAD EXCEL|https://wiki.sdn.sap.com/wiki/dosearchsite.action?searchQuery.queryString=upload+Excel&searchQuery.spaceKey=conf_global]) - Same question already answered many time
GUI_UPLOAD doesnt perform such conversion (Excel, Word, PDF) and wont give you a suitable result, use one of the FM mentioned above or [office integration|http://help.sap.com/saphelp_47x200/helpdata/en/21/b53138e1ba11d2bdbe080009b4534c/frameset.htm] or OLE or convert your Excel sheet to a simpler format : txt, csv, xml.
Regards,
Raymond -
Short dump while reading a currency field from Flat file into internal tabl
Hi,
I am getting a short dump........saying number conversion dump (while reading a currency value into field in internal table from a fixed lenght flat file).........
Do I need to use a string variable to get the value from flat file or how ??
Please suggest.Santosh,
Thanks for your inputs,
But my internal table type is of DEC (5,2) , I am getting that... it needs to be of type 'C'. Can you suggest.
Ex :
MOVE wa_temp-infile_string+106(8) TO wa_item-QT_PERCENT
This didnt work
so i tried moving into a seperate variable
MOVE wa_temp-infile_string+106(8) TO v_percent.
and then write to
WRITE v_percent to wa_item-QT_PERCENT. -
How to get data of tabulated text file into internal table
hi all,
i want to get data from tabulated text file(notepad) into internal table. i searched in SCN and got lot of post regarding how to convert excel file into internal table but i didnt get posts regarding text file.
thanks
SAchintry:
DATA: BEGIN OF tabulator,
x(1) TYPE x VALUE '09',
END OF tabulator.
READ DATASET file INTO wa.
split wa at tabulator into table itab.
A.
Maybe you are looking for
-
Multiple Table.AddColumn command in a single Power Query
I was using this example in another thread for another question and this issue popped up. I have this list in sharepoint. When I run this Power Query let Source = SharePoint.Tables("https://server/test"), PQtesting = Source{[Name="PQtesting"]}[Conten
-
Firefox seems to have somehow disappeared from my computer. I'd like to save my bookmarks before I try to replace the application.
-
Slide duration - How to make one slide have a different duration to another slide?
Slide duration - How to make one slide have a different duration to another slide? EG So one slide has 2 seconds, another 4 another 6 All I can see is how to make all slides have the same duration Any help very much appreciated! Brian
-
I am currently planning on working on a small application (to help keep myself current) for my company. I was hoping to have an Employee management application which would allow EMployees to go in and edit thier details/book holiday and the such. But
-
XPath query error - xml extension in schema
Hi, I am getting following error when i try to assign values to input xml payload before invoke process. "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown. <selectionFailure> <part name="summary" > <summary>X