Upload of purchase order details using LSMW

Hi friends,
I encountered a problem while uploading purchase order details using LSMW . in the field mapping I could not able to fine the field TCODE. as a result I could not assign the transaction code ME21. could you please suggest me a solution.
thanks

Hai
Check with the following
Select fifth Radio button then follow the bellow step
5) select radio-Button 5 and execute
 Maintain Field Mapping and Conversion Rules
 Select the Tcode and click on Rule button there you will select constant
 and press continue button
 give Transaction Code : ME21 and press Enter
Thanks & regards
Sreenivasulu P

Similar Messages

Upload of purchase order text in the material master

Now we have information of Purchase order text for all the material.
Is it possible to upload the Purchase order text using LSMW.
Some friends were telling that LSMW is not possible for Purchase Order text.
Can anyone suggest how I can upload this purchase order text for all 1000
material using LSMW program.
/if not LSMW is there any other method to upload it
thanks in advance
deepak.s.goura

Dear Deepak,
there is standard direct upload i believe
go to lsmw
Execute 1st option
then inLSMW:Object Attribute screen
in standard batch/ direct input
firsr radio button
select object 005
and method 003
Program name RSTXLITF.
Then go by normal process i.e source field , field mapping...
In this way u can also upload Text in the Material master.
Rewards if helpful
Regards
Sanjay L

Migration of Purchase Order History using RM06EEI1

Hi
I have migrated Open Purchase Orders from one SAP system to another SAP system.
I have loaded the Purchase Order details using business object BUS2012 and the PO History using program RM06EEI1.
Only open quantities were loaded to facilitate subsequent Goods Receipts and Invoice Receipts.
The records were loaded without errors.
The Material Ledger was inactive during the migration and activated after the migration.
Everything looks ok from a migration perspective. The correct quantities are created on the PO, the GR shows on the History tab, and the correct GL Accounts were posted to i.e the GRIR Clearing Account and the IR Account.
However, I am unable to perform Invoice Verification (MIRO) and Reversal of Goods Receipts (MIGO) on these records.
The error message is "No (suitable) item found for purchase order".
Has anyone encountered this scenario and can shed some light on this issue?
Regards
Magan

Hi,
I think the best solution would be,
Identify the open POs in legacy system
Migrate the data for these POs for table EKKO, EKPO, EKET and long texts.
Once migrated run tcode OMQ5. this will generate the correct file so that you can upload correct PO history.
Susequently, upload this file through the tcode OMQ2.
Check that you provide correct conversion accounts..
you will get correct Open POs and PO history of open POs from legacy to new system.

Help with purchase order detail

Hello Experts,
I am currently trying to get information on a purchase order, but not having any luck. I need to find the PO Number, and PO Approval Date. I cannot find either of these. I have tried using BBP_PD_PO_GETDETAIL, but have no luck with this. here is what I have:
move w_result-sc_guid TO lv_guid.
        CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
         EXPORTING
           I_GUID                           = lv_guid
           I_OBJECT_ID                      = w_zwkflw_rep-object_id
           I_WITH_ITEMDATA                  = 'X'
           I_READ_FROM_ARCHIVE              = 'X'
         IMPORTING
           E_HEADER                         = ls_e_header
         TABLES
           E_ITEM                           = lt_e_item
All I have available is shopping cart number. Can anyone assist please? Thank you.

hi,
try below steps to retrieve purchase order details from a shopping cart.
get the purchase order GUID in ET_HEADER_REL parameter of BBP_PD_SC_GETDETAIL fm using the shopping cart number or GUID.
then to get the purchase order details, use BBP_PD_PO_GETDETAIL importing I_GUID = purchase order GUID from ET_HEADER_REL.
regards.

Upload Purchase info Records using LSMW

Hi,
Im uploading purchase info records using LSMW - direct method
Object               0060   Purchasing info rec.
Method               0000
Program Name         RM06IBI0
i need step by step process for this. any one have done this using this program help me out.
Regards,
Vimal

Hello Jürgen
and thank you!
One additional question: When I import info records using LSMW, one condition record (PB00) is created automatically. Is it possible to change the validity of that condition record using LSMW, too? Or can I only create new condition records?
Thanks again
Alicia

How to upload Purchase Order Data thru LSMW

Hi All,
I need to upload Purchase order data thru LSMW. LSMW Provides standard object method which does not suit for split valuation. But in the client place split valuation is maintained. Is there any other of option of uploading the data.
Regards,
Srivatsan

Dear Srivatsan
For Upload Purchase order Data through LSMW
Business object BUS2012 - Purchase Order
Basic type PORDCR04
Message type PORDCR
Method CREATEFROMDATA
With regards
B.Ravindranath

Restrict "Create Purchase Order" Authorization using vendor number "LIFNR"

Hello All,
How can we restrict the creation of purchase order(ME21N) using the vendor number (LIFNR).
Any helpful idea?
Regards,

Hey Sanjay,
i am facing same problem of uploading multiple line item through LSMW .
and u did good exploration on same can u give me some idea,
how i do modification in LSMW program?
do u mean i need to do some coding before step CONVERT DATA.
and can u give some guidline to do it..
u r hint will be sufficient..
Thx in Advance..
Rajesh

Interactive ALV report for vendorwise purchase order details

Hi Experts,
I am trying to create vendor wise purchase order interactive report, if i click any of vendor detail it has to display vendor details in a popup window or if i click any of purchase details it has to display purchase order details ina popup..
can any body explain by using function modules REUSE_ALV_POPUP_TO_SELECT and REUSE_ALV_FIELDCATALOG_MERGE...

Check the link below will be of some use to you.
http://www.geocities.com/mpioud/Z_REUSE_ALV_POPUP_TO_SELECT.html
Regards,
Murthy

Interactive report for vendorwise purchase order details

Hi Experts,
I am trying to create vendor wise purchase order interactive report, if i click any of vendor detail it has to call display vendor screen for selected vendor or if i click any of purchase details it has to open purchase order details..
can any body explain...

hi arun,
use at line-selection
example,
at line-selection.
if sy-ucomm = 'PICK'.
if wa_lifnr is not initial.
    set parameter id 'LIF' field wa_lifnr.
    set parameter id 'BUK' field wa_bukrs.
    set parameter id 'EKO' field wa_ekorg.
    call transaction 'XK03'. endif.
if wa_ebeln is not initial.
    set parameter id 'BES' field wa_ebeln.
    call transaction 'ME23N' and skip first screen.
endif.
endif.
Regards,
Logan

I Need interactive report to list the purchase orders details for a vendor

I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

Purchase order layout using Smartform

Hi All,
Can anyone let me know how to create Purchase order layout using smartforms and assigning it to output type.
Is there standard smartform for purchase order?

http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
http://www.sap-basis-abap.com/sapsf001.htm
http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
http://www.esnips.com/doc/13b7ae7a-b32c-4b96-b588-881859d4ac99/Template,Table,Loop,Command-in-Smartforms.doc
http://www.esnips.com/doc/97acb00a-e513-4611-91f0-c626f460bfc5/Smart_Form_Overview.pdf
http://www.esnips.com/doc/77a981b9-8fe3-4fbb-8101-67745c1fe60c/SMART-FORMS_shail.ppt
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Try this. A simple sample Smart Form.
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
SMARTFORMS GENERATION: (calling internal table fields)
 Open a smartform using the tcode smartforms.
 Usually form attributes shows admn data.
 In the form interface declare import/export parameters if any. Else declare the tables in tables tab button.
 In the windows and pages expand and create a table. It automatically generates header, main area and footer for the table.
 In data tab button in the table we usually declare a work area to bring the data from se38. Like: ktab into wa. ( The purpose of declaring the wa is , to get the data of the ktab in to header from the body area of the internal table).
 And in the tablepainter pushbutton in table we can have any no of line types. Depending on the requirement. ( for ex: If we want to devide a row in to 4 columns, we can devide it as 4,4,4,4cm as line type 1, And usually for the footer we dont need no of columns, So, we declare it as one column with 16cm measure with the name line type 2.). We can use these line types in the tables.
 In the header right click>>create>>tableline. It asks for line type. Select one line type which is appropriate.
 Like same create a row2 in main area using right click. If we select the line type 1, it automatically generates 4 cells. We can create text in each cell as per requirement.
 We can generate general attributes using general attributes tab button in the text. Or in the other way. We can switch on the field list on/off button from the application tool bar. It displays all the attributes in the left down corner of the screen. We can drag and drop the required fields in the general attributes tab button of the text.
 We continue the same procedure for all the texts. The texts should be displayed in the gray color. Then only it can collects the data from the abap editor fields.
 If it wont turns gray, we can check the fields in the editor by changing it to the line editor. The best thing is to drag the fields from the list, rather than declaring like &wa-matnr&
 In the footer also we create a line type and in that table line we create text.
SE38 PROGRAM(method I):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
data: FM_NAME TYPE RS38L_FNAM.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in
S_MATNR.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_MYFIRST_FORM2'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IN THE OTHER WAY(method II):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in S_MATNR.
CALL FUNCTION '/1BCDWB/SF00000199'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
In the method I we are calling the amartform dynamically using the function module 'SSF_FUNCTION_MODULE_NAME'.
Here we are exporting form name and importing fm_name.
So we need to declare the variable fm_name as
data: FM_NAME TYPE RS38L_FNAM.
We can have the type of the fm_name in the function module 'SSF_FUNCTION_MODULE_NAME' (in the export tab button).
Since we are passin the name of the Function module generated by the smart form in to the fm_name variable. We run the function module with the name fm_name, but not the FM generated by the smartform(like /1BCDWB/SF00000199)¬¬¬¬¬¬.
In the method II we directly call the smartform generated function module (i.e, /1BCDWB/SF00000199).
But the method I is recommended. In the method I, The fm_name is a variable we dont put it in the quotes while calling.
In the both methods we declare the internal table using the like option, but not begin of. end of. And in select statement we select *, But not individual fields.
EX2:
SMART FORM NAME: ZGITI_FORM1.
SE38:
REPORT Z_CALL_GIRI_FORM1 .
TABLES: VBRK.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE T1.
SELECT-OPTIONS: S_VBELN FOR VBRK-VBELN.
SELECTION-SCREEN END OF BLOCK B1.
*INITIALIZATION.
*T1 = 'SELECTION-CRIETERIA'.
DATA: BEGIN OF I_INVOICE OCCURS 1.
INCLUDE STRUCTURE ZSTR_INVOICE.
DATA: END OF I_INVOICE.
DATA: VAR1 LIKE VBRP-NETWR.
DATA: BEGIN OF I_ADDRESS OCCURS 1.
INCLUDE STRUCTURE ZSTR_ADDRESS.
DATA: END OF I_ADDRESS.
DATA: BEGIN OF I_ORDER OCCURS 1.
INCLUDE STRUCTURE ZSTR_ORDER.
DATA: END OF I_ORDER.
DATA: BEGIN OF I_ITEM OCCURS 1.
INCLUDE STRUCTURE ZSTR_ITEM.
DATA: END OF I_ITEM.
DATA: BEGIN OF I_VBFA OCCURS 1,
VBELV LIKE VBFA-VBELV,
VBELN LIKE VBFA-VBELN,
END OF I_VBFA.
SELECT KUNAG VBELN VKORG VTWEG SPART FROM VBRK INTO TABLE I_INVOICE
WHERE VBELN IN S_VBELN.
IF I_INVOICE[] IS NOT INITIAL.
SELECT KUNNR LAND1 NAME1 NAME2 ORT01 PSTLZ REGIO FROM
KNA1 INTO CORRESPONDING FIELDS OF TABLE I_ADDRESS FOR ALL ENTRIES IN
I_INVOICE WHERE KUNNR = I_INVOICE-KUNAG.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT VBELV VBELN FROM VBFA INTO TABLE I_VBFA FOR ALL ENTRIES IN
I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
IF I_VBFA[] IS NOT INITIAL.
SELECT VBELN BSTNK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE I_ORDER
FOR ALL ENTRIES IN I_VBFA WHERE VBELN = I_VBFA-VBELV.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT POSNR MATNR ARKTX FKIMG NETWR FROM VBRP INTO TABLE I_ITEM FOR ALL
ENTRIES IN I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
LOOP AT I_ITEM.
AT LAST.
SUM.
VAR1 = I_ITEM-NETWR.
ENDAT.
ENDLOOP.
CALL FUNCTION '/1BCDWB/SF00000223'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
var = VAR1
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
tables
i_vbrk = I_INVOICE
i_vbak = I_ORDER
i_vbrp = I_ITEM
i_kna1 = I_ADDRESS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

For getting purchase order details what are the inputs and outputs

I need to display purchase order details in EP portal by using integration EP, XI and R/3.
I dont know what are the Inputs and what are the Outputs.
Reward points for helpers.
Cheers,
Preethika

Hi Preethika,
for displaying PO use BAPI : BAPI_PO_GETDETAIL
Its input is PO number
Its output are tables PO_HEADER_TEXTS - for PO header data
PO_ITEMS - for PO line items
Thanks,
Rajeev Gupta

Extracting Purchase order details

Hai All,
           I am workng on a report in which I have to display the purchase order and GRN details for a given Purchase Requisition number.
If the PR has 5 line items and PO is made only for 2 line items, then the purchase order details for only those 2 line items should be displayed, but I am getting default purch ord data for all those 5 line items even though PO is not made for 3 line items.
Can anyone pls help me on this....

Hi ,
    Here goes ur solution , Only u have to use EBAN and EKBE for the purpose.The report displays item no wise details of PR with PO and GR. selection options for PR REQ or REQ Date is used .
types: begin of int_pr,
     banfn like eban-banfn,
     bnfpo like eban-bnfpo,
     badat like eban-badat,
     ebeln like eban-ebeln,
     bedat like eban-bedat,
     matnr like eban-matnr,
    end of int_pr.
declaring work area.
data: pr_wa type table of int_pr,
      pr_wa1 like line of pr_wa,
       prnum(10),prval(10),tot type n.
types: begin of type_ekbe,
       ebeln like ekbe-ebeln,       " PO NO
       ebelp like ekbe-ebelp,        " ITEM NO IN PO
       belnr like ekbe-belnr,         " GR NO
       end of type_ekbe.
data: itab_gr type table of type_ekbe,
      wa_gr like line of itab_gr.
giving selection crieteria
select-options pr_no for eban-banfn.         " for purchase requistion no.
select-options pr_dt for eban-badat.         " for pr date
start-of-selection.
if pr_no is not initial.
select banfn bnfpo badat ebeln bedat matnr into corresponding fields of table pr_wa from eban where
banfn in pr_no and loekz ne 'x'.
select ebeln ebelp belnr into table itab_gr from ekbe for all entries in pr_wa where ebeln = pr_wa-ebeln and ebelp = pr_wa-bnfpo.
elseif pr_dt is not initial.
select banfn bnfpo badat ebeln bedat matnr into corresponding fields of table pr_wa from eban where
badat in pr_dt and loekz ne 'x' order by badat.
select ebeln ebelp belnr into table itab_gr from ekbe for all entries in pr_wa where ebeln = pr_wa-ebeln and ebelp = pr_wa-bnfpo.
endif.
loop at pr_wa into pr_wa1.
read table itab_gr into wa_gr with key ebeln = pr_wa1-ebeln ebelp = pr_wa1-bnfpo.
if pr_wa1-ebeln ne ' '.
write: / sy-vline,2(10) pr_wa1-banfn color 2, sy-vline,14(12) pr_wa1-badat color 2, sy-vline, 28(9) pr_wa1-bnfpo color 2, sy-vline, 40(13) pr_wa1-matnr color 2, sy-vline, 55(16) pr_wa1-ebeln color 2, sy-vline, 74(15) pr_wa1-bedat color 2, sy-vline,
wa_gr-belnr,sy-vline.
else.
write: / sy-vline,2(10) pr_wa1-banfn color 2, sy-vline,14(12) pr_wa1-badat color 2, sy-vline, 28(9) pr_wa1-bnfpo color 2, sy-vline, 40(13) pr_wa1-matnr color 2, sy-vline, 55(16) 'not processed' color 6, sy-vline, 74(15) pr_wa1-bedat color 2, sy-vline,
wa_gr-belnr,sy-vline.
endif.
endloop.
uline at /1(90).
                             thats all u have to do for getting the required output.

Create Purchase info record using LSMW idoc method

Hello Friends,
I am trying to update Purchase Info records using LSMW Standard program RM06IBI0.
But it is not updating the condition price details and scale Quantity.
For that the form suggessted LSMW IDOC method. with : Message Type         COND_A / COND_A02.
But i dont know is the info record created earlier to this step or else we can create both using this method
at a time ? Does anybody please suggest.
( Actually Purchase Info record created using transaction ME11 ).
Regards,
Phaneendra

you first create the info record and subsequently you load the conditions.
become familiar with the condition tables and its key first. Check How table A017 and A018 are maintained.
Intresting is the field VAKEY which is actually the link to your info record.
This is a combination of vendor, material, purchasing org, plant , and info record indicator.
data: begin of ZZVARKEYA,
        ZLIFNR like LFM1-LIFNR,
        ZMATNR like MARc-MATNR,
        ZEKORG like LFM1-EKORG,
        ZWERKS like MARC-WERKS,
        ZINFTYP like EINE-ESOKZ,
        end of zzvarkeyA.

Error in : Purchase order Creation using BAPI_PO_CREATE1

Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
* Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
* Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

Hi Shareen,
I think in the following parts of the code,
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa.
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi
 poitemx = i_bpoix
 poschedule = i_bpos
 poschedulex = i_bposx.
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

Upload of purchase order details using LSMW

Similar Messages

Maybe you are looking for