Upload to Createspace fails despite cable internet

For some odd reason, I am unable to upload to CreateSpace, despite high speed internet, good files, etc. I can upload the same files form all other available computers. Nothing I know of is set to disallow this. There are no known physical obstacles as other computers can upload from the room on the same wifi, etc. I can't upload from anywhere else, either so it's the computer, but what can I change to make it work? Any thoughts?

What do you have in your site that would add up to 1.4 GB of published files? If you have a lot of movie/video files that were added directly to the web pages you can upload them to a folder on your server and link to them there with iFrame code in an HTML snippet.
iFrame code:
<iframe height="XXXpx" allowTransparency="true" frameborder="0" scrolling="no" style="width:XXXpx;border:none" src="URL TO ITEM TO BE EMBEDDED"></iframe>
This has two beneficial effects: 1 - requires kist a one time upload of the movie file; and 2 - the movie doesn't load on the page till the play button is selected making the site load much faster. This demo page has a movie add that way: QT movies via iFrame
Let us know what the content is so we might offer some definitive solutions.
OT

Similar Messages

Fail when config "Internet Directory Configuration Assistant"

I install oracle9ias( Infrastructure ) in AIX4.3.3 .
It failed when config "Internet Directory Configuration Assistant"
error message:
No output aviaible for this tool

the solution is
1- I removed the Network cable
2- I formatted the server
3- I Installed the Application Server
4- I Connected the server with network and I gave a static IP to the server
Best of Luck
Edited by: user13011851 on Jan 11, 2011 2:40 AM

2501 router connecting to cable internet?

My topology looks like this:
Cox cable internet cloud -> Motorola Cable modem -> [e0] 2501 router [s0] -> [s0] 2501 router [e0] -> 2924 switch -> host
My mission is get connect to the internet. But its been all fails so far. The e0 port on the 2501 router does not offer "ip address negotiated" command. I figured that would be all I needed to do since I get an ip address assigned dynamically by the cable company.
I could hook up a linksys router to get the ip dynamically, then copy that information over somehow onto the 2501 router to get connected. Would that help at all? By looking at the linksys router I can determine what the public ip address is, the DNS, gateway and subnet. It is NOT PPPoE.
Thanks for any help.

In case you're wondering here's the output from "debug dhcp detail". And YES I have the same topology as the original post, this router is directly connected to the modem using ethernet. I will call Cox today to see if they know.
router_2501(config)#int e0
router_2501(config-if)#shut
01:52:32: %LINK-5-CHANGED: Interface Ethernet0, changed state to administrativel
y down
router_2501(config-if)#no shut
01:52:35: DHCP: SRelease attempt # 1 for entry:
01:52:35: Temp IP addr: 10.49.205.119 for peer on Interface: Ethernet0
01:52:35: Temp sub net mask: 255.255.240.0
01:52:35: DHCP Lease server: 172.19.73.16, state: 7 Releasing
01:52:35: DHCP transaction id: 1B02
01:52:35: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs
01:52:35: Next timer fires after: 00:00:00
01:52:35: Retry count: 1 Client-ID: cisco-0000.0c3f.249d-Et0
01:52:35: DHCP: SRelease placed Server ID option: 172.19.73.16
01:52:35: DHCP: SRelease: 277 bytes
01:52:36: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
01:52:36: DHCP: SRelease attempt # 2 for entry:
01:52:36: Temp IP addr: 10.49.205.119 for peer on Interface: Ethernet0
01:52:36: Temp sub net mask: 255.255.240.0
01:52:36: DHCP Lease server: 172.19.73.16, state: 7 Releasing
01:52:36: DHCP transaction id: 1B02
01:52:36: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs
01:52:36: Next timer fires after: 00:00:00
01:52:36: Retry count: 2 Client-ID: cisco-0000.0c3f.249d-Et0
01:52:36: DHCP: SRelease placed Server ID option: 172.19.73.16
01:52:36: DHCP: SRelease: 277 bytes
01:52:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed sta
te to up
01:52:37: DHCP: SRelease attempt # 3 for entry:
01:52:37: Temp IP addr: 10.49.205.119 for peer on Interface: Ethernet0
01:52:37: Temp sub net mask: 255.255.240.0
01:52:37: DHCP Lease server: 172.19.73.16, state: 7 Releasing
01:52:37: DHCP transaction id: 1B02
01:52:37: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs
01:52:37: Next timer fires after: 00:00:00
01:52:37: Retry count: 3 Client-ID: cisco-0000.0c3f.249d-Et0
01:52:37: DHCP: SRelease placed Server ID option: 172.19.73.16
01:52:37: DHCP: SRelease: 277 bytes
01:53:08: DHCP: QScan: Purging entry
01:53:08: DHCP: deleting entry 240414 10.49.205.119 from list
01:53:08: Temp IP addr: 10.49.205.119 for peer on Interface: Ethernet0
01:53:08: Temp sub net mask: 255.255.240.0
01:53:08: DHCP Lease server: 172.19.73.16, state: 8 Purging
01:53:08: DHCP transaction id: 1B02
01:53:08: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs
01:53:08: No timer running
01:53:08: Retry count: 0 Client-ID: cisco-0000.0c3f.249d-Et0
router_2501(config-if)#

Firefox on Shaw Cable Internet cannot connect to google services such as gmail and google search.

Called two associates and tried on two different Shaw connections at two different locations. No one can connect to Google searches on Shaw Cable internet in the Surrey, BC area using Firefox. It works with internet explorer and chrome.
Is Google doing this on purpose to get more chrome users?
Receiving following error:
Secure Connection Failed
An error occurred during a connection to www.google.ca. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.

Hi GaryGS, that change limits Firefox to using the SSLv3 protocol, when normally Firefox would upgrade to TLSv1 if the site supports it. I recommend trying to switch it back tomorrow or the next day for stronger secure connections once Shaw's issue is resolved.

My iPhone 6 order was canceled without my permission and without reason or explanation. I have had a verizon cell phone for 13 years and have gotten your cable/internet/phone when i moved out on my own because i had been so happy with the experience i had

I have had a verizon cell phone for 13 years and have gotten your cable/internet/phone when i moved out on my own because i had been so happy with the experience i had with the cell phone service. i ordered my new iPhone 6 on October 6th along with my husband. i was told by the sales associate at the vierzon store where i placed the order that it would ship a week before halloween. instead of a shipping confirmation, i received an email a week before halloween letting me know that my order had been placed on 10/24/14. i thought this was weird, but figured i could weight another week or two, no big deal. my husband got his phone in the mail yesterday. still no sign of mine. then this morning i got an email letting me know that my order was cancelled and if id like to place another order for a phone, then i can go back to the store and do so. why would i want to go through another month of this??? verzon lost my order. i never canceled it and i am beyond annoyed. i am looking to switch my entire house to another provider. this is ridiculous.

i did not get any reasons or explanations. the email just stated that my order was canceled and that it won't be posted to my credit card (i have more than enough to cover the cost, so that is not the issue). also my husbands phone was paid for from the same card moments before me. my balance is always paid automatically and on time. so that couldn't be the reason either. that's what so frustrating is because they didn't explain what happened. this is what the email read exactly:
"This email is to confirm that your order has been cancelled; you have not been billed for this merchandise.
If you would like to place a new order, you may do so by visiting your local retail store or going online to www.verizonwireless.com.
Business customers should refer back to their local Verizon Wireless Sales Representative if you have any questions or would like to place a new order.
Thank you, and we look forward to your business in the future.
Verizon Wireless"
it almost feels like its saying that i canceled it and that this was to confirm that i did. but i didn't cancel anything.

Cable internet (ethernet) won't work or even show up adapter

Hello,
I am owner of S10-3 laptop and I have problem - cable internet is not working. Adapter in adapter section or HWinfo (software, which shows hardware incomputer) won't show up nor internet working.
There is no changes if I put or remove cable. I tried installing driver, but it says it can't find adapter.
What can be problem and how can I fix it? Might it be physical problem?

Hi and welcome,
go in BIOS via F2 press F9 for default values.. F10 to exit ..
If possible try to boot with a live linux USB ..If there is cable LAN available... your windows should be restored .
Try an other cable , cable could be broken
If nothing help , call your local service if your S10-3 is under warranty.
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

How to run a cable internet on 877W router, please help.

Hello everyone!
I have made many variants of IOS configuration but nothing seem to work yet and finally I need someone to tell me if this is possible at all.
I was using 877W when I was registered to my ISP as a DSL user, everything was perfect. Now I'm using a cable internet and I just can't believe this device can't handle it. I'm trying to get it done for months with one result - network loop (I guess). Don't want to give up.
Situation is as following:
Because 877W doesn't have a routable port, I'm using a VLAN and a Bridge interface to assign an IP address from ISP.
ISP -> FE0 switchport -> VLAN 1 - BVI 1 (BVI with mac address set so ISP will give it IP from their DHCP)
interface FastEthernet0
interface Vlan1
no ip address
no ip redirects
ip virtual-reassembly
no autostate
bridge-group 1
interface BVI1
mac-address ####.####.####
ip address dhcp
ip nat outside
ip virtual-reassembly
By this configuration, internet works for for a while, then it drops and I have to restart BVI 1 interface to bring internet back again.
If I add this command in main config:
no spanning-tree vlan 1
Internet will never drop but it will became very slow, from say 35Mbps to 1-5mbps.
I think that I need somehow to force my ISP switch to "think" that my FE0 switchport is not a switchport but a single host.
Guys, I need your help!

http://download.oracle.com/otn_hosted_doc/forms/forms/A73071_01.pdf
Good luck...
Sim

Cable internet not is working properly

In October I bought a Macbook ‘better’. It worked fine up till now. I have problems with surfing the internet. I have cable internet. When I put the same internet cable in an other computer it works fine. It’s fast and every site opens. So it’s not the internet provider, server or my cable that does not function properly.
When I have the internet cable in my Macbook the internet works for a while but after some time the computer takes a long time for loading a new internet page and sometimes he can’t find it at all and gives an error.
Strange thing is that when I close my Macbook (sleep mode) and then open it again my internet works for a very short time normally. (I can open one or two internet pages normally. After that it gets very slow again or it can’t find a normal page like google.
I did the Apple hardware test but nothing came out. I called the Apple support in the Netherlands. They gave my tips like putting the battery out while pressing the on/off button. Deleting the cookies and empting the waste-paper basket. But off course this all does not solve the problem. Has anybody found a solution for this problem yet? Thank you a lot in advance.

As I asked before will Apple not take care of the problem? It's under one year warranty and if you purchased Apple Care then 3 years. I'd call Apple and tell them to fix it. IF they refuse then you keep calling with the same problem and every other little problem after that. If you don't then it will not be documented that your computer is having issues.
Now on to your problem, as Templeton Peck stated above, you need to back up your data and possibly rebuild or reload OSX.
With that said, I would like to make a very strong suggestion. If I were you I would go buy you a descent size external hard drive USB or firewire-(preferred if you have firewire on that Macbook). Once you get a good drive then load a fresh install of OSX onto that external drive and do not do any updates yet.
Now that you have a good fresh OSX system on the external, you can now boot from that new OSX system to help verify software verse hardware.
This way you'll not have to erase your entire system to reload OSX, only to find out that reinstalling did not help. You can use this new drive as a backup later and use SuperDuper to create and entire backup of your system with it's data that will also be bootable, for future troubleshooting or if your internal drive breaks you can just swap them out.

Connecting Cable Internet to Time Capsule

I know this is dumb, but I'm tired! I'm trying to set up Time Capsule using my cable internet. Time Capsule obviously does not have a coaxial cable port, so how do I actually get my internet feed into the Time Capsule? Do I need to keep using the router provided by Comcast and only use Time Capsule as a wireless backup? Thanks!

sweetsweetjane wrote:
Do I need to keep using the router provided by Comcast and only use Time Capsule as a wireless backup?
You don't need to keep Comcast's router, but you do need something that can operate as a cable modem. Depending on the exact details of your Comcast service, something like this device.
If you don't want to go that route, you should put either the Comcast router or the Time Capsule into "bridge mode". You're better off not having two devices both acting as a router.

Connecting IPad to Cable Internet

I am considering purchasing an IPad for an 80 year old gentleman. He has wireless internet in his home but has cable internet at his summer residence. Is there any adapter to accomplish an internet access to a cable internet system, without the installation of a wireless router and confusing this man?

Another option is to buy the iPad and the Verizon Wireless mobile MiFi 2200 Hot Spot at one of the Verizon Wireless stores. I did this last month and am very satisfied with the service. However, like any of these devices, if his summer home is out in the middle of nowhere, he may have reception problems with the hot spot.
The other downside is that then he will have a monthly data charge like you have with iPhone service or a Droid. You must have the data plan in order to use the mobile hot spot that Verizon offers. The device itself is about the size of a credit card but a little thicker. It is battery powered and comes with a wall charger.
You can view the device and the plan on the Verizon Wireless web site.

If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

Hi I'm from Australia.
If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

Any specific recommendations for a standalone ADSL modem though?
Always a good idea to use the modem that your service provider supplies or recommends....often free....since you know that it will be supported in the event of connection difficulties.
I have made the mistake of choosing the "best" modem based on test reports....only to find out later that the ISP would not offer any support when I was having connection difficulties.
The ISP blamed the modem. The modem support folks blamed the ISP.

I need free network analyzer software for my mac. we are trying to monitor what software may be running which is causing our internet to fail, although the internet is still coming into our modem.what is recommended?

My internet keeps 'tripping' at or around the same period time each day. We have already replaced our modem from our internet provider and we bought a new airport extreme router. We do not believe these were the cause, although we have now ruled them out as a cause. Everytime the internet fails, our internet provider company tells us that there is still plenty of signal coming into our house. There is something going on inside we believe, and a technician set up our Network Utility to run a continuous ping test to capture information about when it 'trips' againn. Yesterday, it happened again, and when he checked the data out, he said he is sure there is something 'running in the background' on my IMac. He advised me to download a free Network Analyzer so he could further investigate what is was that was causing the problem, so I need a free network analyzer software for my Mac. The issue has been going on for a long time, so it is not the new operating system, Lion. This morning, we changed the radio channel from 'auto' to 'manual' and set a new channel, hoping that might help. We are trying to find out what program may be running (even a tiny one in the background) which is causing our internet to fail, although the internet is still coming into our modem. What is free downloadable product is recommended?

Will Activity Monitor and/or Network Utility, both already in the Utilities folder on your Mac, help in trying to diagnose the problem.
If you are connecting via wifi what encryption are you using? If you're using the Exteme I doubt that you are using WEP, but worth checking as it seems Macs don't like it and work better using WPA.

How do you connect three things--computer, cable internet and vonage phone?

I bought and extra cable to connect from the computer to the wireless base thinking this would help out; however, I am still not able to connect wirelessly. I typed in the protocol from the cable internet into the forms that the computer asked for. Am at a loss as to what went wrong. Would like to be able to use ipad and my computer wirelessly in the house while still being able to us vonage. any suggestions?

Do you have a really long ethernet cable?
Copyright 2014

AEBS and Linksys working separately from cable internet

Hello,
I have searched the forums and could not find the answer to my question. I currently have a Linksys a/b/g wireless router setup in my home and it's working fine. We have a Dell notebook with a Linksys G wireless card and a brand new MacBook Pro. I would like to take advantage of wireless N speed on my MBP and would like to get an AEBS. I have read that if a computer using wireless G is one the same AEBS network that all computers will only run at G speeds. The Dell notebook is not worth upgrading to an N wireless card, so I was wondering if I could use both my linksys router and AEBS together - the dell running off the Linksys and MBP off the AEBS. Can this work?
I have cable internet and this is how I think I should set things up: Cable modem to the AEBS, ethernet AEBS to Linksys. Since one will be using the N band and the other the G band will I get interference?
Any suggestions would be very welcome. Thank you

Yes, this will work and it's what I'm currently doing now, only I am using an express unit for my main G base station.
One router connects to your cable or dsl modem and the other is wired into the first. You end up with two separate wireless networks. You should give them different names to avoid confusion and different channels to avoid interference but if you set the AEBS to 5GHz this should take care of that. Set it so that it only supports N connections.
The second router in the chain should have DHCP and NAT turned off. The first router will handle all of this. If you have trouble figuring out how to set "bridge" mode correctly on the Linksys you can swith that to the main and plug the AEBS unit into that, if the Linksys has a built-in switch, like the AEBS does.

I am getting a message that says download failed because of internet connectivity/ firewall

i am getting a message that says download failed because of internet connectivity/ firewall- how do i fix that? I am on vacation in mexico, need to install bridge to edit photos and the creative cloud wont install....

Hi,
Please refer to the help document below:
Troubleshoot download problems
Regards,
Sheena

Upload to Createspace fails despite cable internet

Similar Messages

Maybe you are looking for