Upload wsp file and configure webpart in Sharepoint 2013
Hi All,
I have a WSP file which has custom webpart built from VS 2013.
Now I need to upload WSP file and add that webpart in the site I have created.
I have gone to Site settings--> Web Designer Galleries --> Solutions and uploaded Solution.
Then activated.
But when I go to Site settings--> Web Designer Galleries--> Webparts and go to 'New' , I am not able to see that webpart!!!
Regards, Shreyas R S
I assume it is not a Sandbox solution and it a full trust solution. Try below:
Remove that webpart
On sharepoint server type
add-spsolution
path of file e.g. c:\132.wsp
Then from central admin > systems > farm solutions > select the wsp and select deploy
Once deployed it has reference in web.config which did not happened in your previous case.
then you can follow same process of activating the solution and adding it to page
Similar Messages
-
Installating and Configuring RBS for SharePoint 2013
Hi,
I was following this article http://technet.microsoft.com/en-us/library/ee748631(v=office.15).aspx#provision in
order to provision the BLOB Store for Content Database, in the step no.6 and the third SQL query, it is asking me to create a folder under “C” directory called ‘Blobstore’ which is on the same SQL server but here I would like to use some other remote server
or network shared drive other than current SQL database server in order to provision ‘Blobstore’. Please advise if it is possible?
Just FYI my client is not ready to use any third party tools in order to do any configuration.<o:p></o:p>
Thanks in advance
AliIt is not possible using the Microsoft RBS provider. The storage must be presented as a local volume to the SQL Server (this includes volumes mounted over an iSCSI or Fiber Channel interface, for example).
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Install and configuration on the SharePoint server 2007 issue
Hi All,
I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
Please check the Edited install.bat file and error log.
Install.bat
set _my_datetime=%date% %time%
@echo on
echo Begin Installation at %_my_datetime%
echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
@echo off
@SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
@SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
@SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
@SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
@SET SITEURL="http://sharepoint7:80/sites/DCADC"
@SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
REM cd $(ProjectDir)
%GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
pushd %TEMPLATEDIR%\features
Echo Deactivating LiveCycle Connector feature with WSS
%STSADM% -o deactivatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
Echo Deactivating LiveCycle Workflow feature with WSS
%STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
Echo Uninstalling LiveCycle Connector with WSS
%STSADM% -o uninstallfeature -filename LiveCycle\feature.xml -force
Echo Uninstalling LiveCycle Workflow with WSS
%STSADM% -o uninstallfeature -name LiveCycle/Workflow -force
popd
Echo Copying source files to WSS \TEMPLATE directory
xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
Echo Copying Feature Resource files to WSS 12\Resources directory
xcopy Resources %RESOURCESDIR% /e /y /i
Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
pushd %TEMPLATEDIR%\features
Echo Installing LiveCycle Connector with WSS
%STSADM% -o installfeature -filename LiveCycle\feature.xml -force
Echo Installing LiveCycle Workflow with WSS
%STSADM% -o installfeature -name LiveCycle/Workflow -force
Echo Activating LiveCycle Connector with WSS
%STSADM% -o activatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
Echo Activating LiveCycle Workflow with WSS
%STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
popd
Echo Restarting IIS worker process
IISRESET
set _my_datetime=%date% %time%
@echo on
echo End Installation at %_my_datetime%
@echo off
Error Log
E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27
Begin Installation at Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
"Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Deactivating LiveCycle Connector feature with WSS
Operation completed successfully.
Deactivating LiveCycle Workflow feature with WSS
Operation completed successfully.
Uninstalling LiveCycle Connector with WSS
Operation completed successfully.
Uninstalling LiveCycle Workflow with WSS
Operation completed successfully.
Copying source files to WSS \TEMPLATE directory
TEMPLATE\FEATURES\LiveCycle\Elements.xml
TEMPLATE\FEATURES\LiveCycle\Feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
TEMPLATE\IMAGES\LiveCycle\createPdf.png
TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
16 File(s) copied
Copying Feature Resource files to WSS 12\Resources directory
Resources\AdobeLiveCycleConnectorCore.de-DE.resx
Resources\AdobeLiveCycleConnectorCore.de.resx
Resources\AdobeLiveCycleConnectorCore.en-US.resx
Resources\AdobeLiveCycleConnectorCore.en.resx
Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
Resources\AdobeLiveCycleConnectorCore.fr.resx
Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
Resources\AdobeLiveCycleConnectorCore.ja.resx
Resources\AdobeLiveCycleConnectorCore.resx
9 File(s) copied
Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
App_GlobalResources\AdobeLiveCycleConnector.de.resx
App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
App_GlobalResources\AdobeLiveCycleConnector.en.resx
App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
App_GlobalResources\AdobeLiveCycleConnector.fr.resx
App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
App_GlobalResources\AdobeLiveCycleConnector.ja.resx
App_GlobalResources\AdobeLiveCycleConnector.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
App_GlobalResources\AdobeLiveCycleWorkflow.resx
18 File(s) copied
Installing LiveCycle Connector with WSS
Operation completed successfully.
Installing LiveCycle Workflow with WSS
Operation completed successfully.
Activating LiveCycle Connector with WSS
Operation completed successfully.
Activating LiveCycle Workflow with WSS
Operation completed successfully.
Restarting IIS worker process
Attempting stop...
Internet services successfully stopped
Attempting start...
Internet services successfully restarted
E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29
End Installation at Wed 08/22/2012 14:41:00.29
Waiting...
Regards,
Amol SahareThis might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138 -
I have purchased a monthly subscription to Adobe PDF pack so that i can edit a PDF file, i have uploaded the file and its now in "my assets". how do i now edit this file??
You can't edit a file with PDF Pack, but you should be able to convert it to a Word document, and if you are really lucky edit THAT and make a new PDF. Don't expect too much though!
-
Upload csv file and insert into a table for user
Hello,
i want to create a Page on which, the User of my Application can upload a semicolon delimited file and the data of the file should automatically be stored in a table.
I can upload the file and the file is then stored in the htmldb_application_files table.
But I do not no how to parse the file....
Can anyone help me or is there anyone who have done that before?
Thank you,
TimTim...
Here is what I did in a similar situation.
Let the user download a csv file to use as an excel turnaround document.
I check digit the primary key. They are not supposed to touch that column.
They do their excel thing adding data in columns next to the ones they are updating. They now have the original and new data on the same row in the excel document. They save it on a share drive as a csv. A perl script wakes up and parses the csv. Verify's the check digit, checks that the old values still exist in the table... etc, and then does the update if all is well at the row level. The csv is replaced showing the success or failure of the update on each row.
Probably lots of other ways to accomplish this but I have gotten years of use out of the script. The original csv can come out of almost any application. Mine come from apex, discoverer and some excel queries.
Bob -
Upload excel file and display content in sapui5 table
hi:all
how to upload excel files and display its contents in the view of sapui5 table ,then 'create ' these data into the abap database using odataservice.
Do you have any solutions ? I appreciate for your help.Two possible way come to mind.
1. ADF DI (desktop integration): sorry, don't know enough about it to give a how to :-(
2. POI (http://poi.apache.org/) : open source project to read and write excel file with java. Using POI you can open the .xsl file, read it's contents and display it as af:table. For this you need to read the xsl into a data structure (this can be a temporary db table or a list of POJOs) and build a data control out of it. This you can drop on a page as table.
Timo
Edited by: Timo Hahn on 15.02.2010 13:59 -
Hi Friends,
I was trying to run configuration wizard in SharePoint 2013 Central Administration and I got below error:
Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.
Yesterday my SharePoint server was running fine and today when I try to update a SharePoint solution (wsp) I got same error. Even if I try to do any operation
in Central administration like adding new WSP, Updating WSP , I get same error.
Does any one have any Idea?
Regards
Gireesh PainulyPosted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl -
Asynchronous visual webpart for SharePoint 2013
HI,
How to create asynchronous visual webparts in SharePoint 2013 (VS 2012) . I can see lot of examples for 2010 version, but not for SP 2013.
I have 2 visual webparts, which I want to make it as a asynchronous webpart. One webpart has the code written in Javascript client object model(loads lot of images), another is a server side webpart which has a SPGridview.
Is there any sample code available for SP 2013?
ThanksHi,
Please try to convert the SharePoint 2010 project to SharePoint 2013.
http://sadomovalex.blogspot.kr/2013/02/convert-visual-studio-sharepoint-2010.html
In SharePoint 2013, we can create a visual web part, then we can use jQuery Ajax and REST API to achieve asynchronous data loading.
More information:
http://www.dotnetcurry.com/showarticle.aspx?ID=1009
http://asyncwebpartframewrk.codeplex.com/releases/view/52459
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
We have our SMTP server under port number 141 and we should add username and password. but inside SharePoint 2013, I can only define the SMTP server name , from email, reply-to . But there are not fields to define the port number , the username and password.
So can anyone advice from where I can define the port number and other field settings for the SMTP server ?
Thanksi am no sure about user name and password. i never saw that option.
check this guide:
http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
http://blog.fpweb.net/configuring-an-smtp-server-for-sharepoint/#.UuANoxAo6M8
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
thanks for the reply, but in our case the SMTP is a separate server , and to connect to it i need to define the ; server IP /Name , port number, username & password. but in SharePoint there is no option to define the port number , and the links you
provide are regarding configuring SMTP server, while we already have an SMTP server but i need to connect SP with it . can you advice please? -
Integrate Workday and ServiceNow applications with SharePoint 2013 online
Hello, we have to integrate Workday and ServiceNow applications with SharePoint 2013 online and need to display data from these applications
to SharePoint 2013 intranet site.
Any information about the integration of Workday and ServiceNow applications with SharePoint 2013 would be greatly appreciated. Thanks!
Regards,
ShailendraHi Shailendra,
I searched a lot, there seems very few information from internet and internal about this topic, I'm not familiar with Workday and ServiceNow applicaitons, I would recommend you may post in the following community sites(which should be offcial
sites) for a better assistance regarding the integration questions between Workday and ServiceNow and SharePoint Online(O365).
https://community.servicenow.com/thread/174050
https://community.workday.com/
http://community.office365.com/en-us/f/154.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
How to calculate when I need multiple WFE and APP servers in SharePoint 2013 ?
Hi,
Please let me know about those factors are involved on the above topic. Share something from the real experience or with examples in details.
Thanks
srabonHi,
NOte: some links although for 2010 but fits for 2013
for the WFE is the RPS Requests per second versus the users
to get the RPS
http://smallcitydesign.com/how-to-get-sharepoint-2010-requests-per-second-rps/
and this excel sheet to get the users versus RPS
http://pcfromdc.blogspot.com/2013/02/determine-max-users-from-requests-per.html
and here you are how to get the number of front ends
http://abhayajoshi.blogspot.com/2014/01/how-to-calculate-number-of-web-front_24.html
for Apps server, it is based on memory and cpu consumption, check those links
http://blogs.msdn.com/b/sanjaynarang/archive/2013/04/06/sizing-and-capacity-planning-for-sharepoint-2013-resources.aspx
https://technet.microsoft.com/en-us/library/ff758645.aspx
https://technet.microsoft.com/en-us/library/cc262971.aspx
the most important thing after you do you initial capacity planning is capacity mangement, check my wiki article in here
http://social.technet.microsoft.com/wiki/contents/articles/28226.sharepoint-2013-capacity-management.aspx
you can also make load testing using the following:
Visual studio or
https://gallery.technet.microsoft.com/office/PressurePoint-Dragon-for-58648ae4
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you -
Dear All,
Issue in CQWP paging on IE9, IE10 and Firefox
We have created CQWP in SharePoint 2013 for images rollup and its paging perfectly working for authenticated users on all browsers but it’s not working on public facing site for specific browser
while we are trying to click on paging getting
something went wrong and correlation with correlation id
We did log analysis and getting different kind of problem description on every click some time contents authentications error, sometime memory
Once I put webpart inside the <!--MS:<ZoneTemplate>--> its completely stop working
so we placed webpart outside <!--MS:<ZoneTemplate>--> currently
Strange point is its working on IE11. Please help us its highly appreciated
Code Details :
<div data-name="WebPartZone">
<!--CS: Start Web Part Zone Snippet-->
<!--SPM:<%@Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
<div xmlns:ie="ie">
<!--MS:<WebPartPages:WebPartZone runat="server" AllowPersonalization="false" ID="x5d2d1828b2b44612974f72caded2bcd3" FrameType="TitleBarOnly" Orientation="Vertical">-->
<!--MS:<ZoneTemplate>-->
<!--ME:</ZoneTemplate>-->
<!--ME:</WebPartPages:WebPartZone>-->
</div>
<!--CE: End Web Part Zone Snippet-->
<!--CS: Start Content Search Snippet-->
<!--SPM:<%@Register Tagprefix="spsswc"
Namespace="Microsoft.Office.Server.Search.WebControls" Assembly="Microsoft.Office.Server.Search, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>-->
<!--SPM:<%@Register Tagprefix="a2e8ead9d"
Namespace="Microsoft.Office.Server.Search.WebControls" Assembly="Microsoft.Office.Server.Search, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>-->
<!--MS:<spsswc:ContentBySearchWebPart runat="server" AlwaysRenderOnServer="False"
ResultType="" NumberOfItems="12" DataProviderJSON="{"QueryGroupName":"Default","QueryPropertiesTemplateUrl":"sitesearch://webroot","IgnoreQueryPropertiesTemplateUrl":false,"SourceID":"8413cd39-2156-4e00-b54d-11efd9abdb89","SourceName":"Local
SharePoint Results","SourceLevel":"Ssa","CollapseSpecification":"","QueryTemplate":"path:\"http://thepubauth.viacom.com/sites/vh1press/Shows/Show assets\"
PictureURL:\"/sites/vh1press/Shows/Show assets/{Page.ID}/\" (ContentTypeId:0x0101009148F5A04DDD49cbA7127AADA5FB792B00AADE34325A8B49cdA8BB4DB53328F214* OR ContentTypeId:0x010102*)","FallbackSort":[{"p":"LastModifiedTime","d":1},{"p":"Title","d":0}],"FallbackSortJson":"[{\"p\":\"LastModifiedTime\",\"d\":1},{\"p\":\"Title\",\"d\":0}]","RankRules":null,"RankRulesJson":"null","AsynchronousResultRetrieval":false,"SendContentBeforeQuery":true,"BatchClientQuery":true,"FallbackLanguage":-1,"FallbackRankingModelID":"","EnableStemming":true,"EnablePhonetic":false,"EnableNicknames":false,"EnableInterleaving":false,"EnableQueryRules":true,"EnableOrderingHitHighlightedProperty":false,"HitHighlightedMultivaluePropertyLimit":-1,"IgnoreContextualScope":true,"ScopeResultsToCurrentSite":false,"TrimDuplicates":false,"Properties":{"TryCache":true,"Scope":"{Site.URL}","ListId":"00000000-0000-0000-0000-000000000000","UpdateLinksForCatalogItems":true,"EnableStacking":true},"PropertiesJson":"{\"TryCache\":true,\"Scope\":\"{Site.URL}\",\"ListId\":\"00000000-0000-0000-0000-000000000000\",\"UpdateLinksForCatalogItems\":true,\"EnableStacking\":true}","ClientType":"ContentSearchRegular","UpdateAjaxNavigate":true,"SummaryLength":180,"DesiredSnippetLength":90,"PersonalizedQuery":false,"FallbackRefinementFilters":null,"IgnoreStaleServerQuery":false,"RenderTemplateId":"DefaultDataProvider","AlternateErrorMessage":null,"Title":""}"
BypassResultTypes="True" ItemTemplateId="~sitecollection/_catalogs/masterpage/Display Templates/Content Web Parts/DT_Images.js" GroupTemplateId="~sitecollection/_catalogs/masterpage/Display Templates/Content Web Parts/Group_Content.js"
ResultsPerPage="9" SelectedPropertiesJson="["PublishingImage","PictureURL","PictureThumbnailURL","Path","Title","Description","SecondaryFileExtension","ContentTypeId"]"
HitHighlightedPropertiesJson="["Title","Path","Author","SectionNames","SiteDescription"]" AvailableSortsJson="null" ShowBestBets="False" ShowPersonalFavorites="False"
ShowDefinitions="False" ShowDidYouMean="False" PreloadedItemTemplateIdsJson="null" QueryGroupName="Default" RenderTemplateId="~sitecollection/_catalogs/masterpage/Display Templates/Content Web Parts/Control_ListWithPaging.js"
StatesJson="{}" ServerIncludeScriptsJson="null" Title="Content Search" FrameType="None" SuppressWebPartChrome="False" Description="<%$Resources:Microsoft.Office.Server.Search,CBS_Description;%>"
IsIncluded="True" ZoneID="ImportedPartZone" PartOrder="0" FrameState="Normal" AllowRemove="True" AllowZoneChange="True" AllowMinimize="True" AllowConnect="True" AllowEdit="True"
AllowHide="True" IsVisible="True" DetailLink="" HelpLink="" HelpMode="Modeless" Dir="Default" PartImageSmall="" MissingAssembly="<%$Resources:core,ImportErrorMessage;%>"
ImportErrorMessage="<%$Resources:core,ImportErrorMessage;%>" PartImageLarge="" IsIncludedFilter="" ExportControlledProperties="True" ConnectionID="00000000-0000-0000-0000-000000000000" ID="g_9f61c988_228e_4f91_8d67_04314f144f48"
ChromeType="None" ExportMode="All" __MarkupType="vsattributemarkup" __WebPartId="{9f61c988-228e-4f91-8d67-04314f144f48}" WebPart="true" Height="" Width="">-->
<!--ME:</spsswc:ContentBySearchWebPart>-->
<!--PS: Start of READ-ONLY PREVIEW (do not modify)--><div ms-webpart-chrome-fullWidth "><div webpartid="00000000-0000-0000-0000-000000000000" haspers="true" id="WebPartWPQ1" width="100%" noindex
" onlyformepart="true" allowdelete="false" ><div style="display: none;"></div><div componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_csr"
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_csr" style="display: none;"></div><noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_noscript">It
looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48"><div><div
id="WebPartWPQ2_ChromeTitle"><span title="" id="WebPartTitleWPQ2"><h2 style="text-align:justify;"><nobr><span></span><span id="WebPartCaptionWPQ2"></span></nobr></h2></span></div><div
webpartid="00000000-0000-0000-0000-000000000000" haspers="true" id="WebPartWPQ2" width="100%" ms-WPBorder noindex ms-wpContentDivSpace " onlyformepart="true" allowdelete="false" ><div componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_csr"
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_csr"><div id="DataProvider" name="Control"></div></div><noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_noscript">It
looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00"></div><div></div></div></div></div><div></div></div></div><!--PE:
End of READ-ONLY PREVIEW-->
<!--CE: End Content Search Snippet-->
</div>Hi,
In the “Property Mappings” of the Content Search Web Part, we can see that the Picture field will only display the value retrieved from “PublishingImage;PictureURL;PictureThumbnailURL”,
because there is corresponding column in OOTB Document Library holds the valid value of a thumbnail image for a document, that’s why documents from Document Library display no thumbnail image in a Content Search Web part.
If you want to display thumbnail images for documents of Document Library, you can add a custom Picture column to hold the thumbnail image of a document, set the “Property
Mappings” to display this custom Picture column.
By doing this, every time uploading a document to this library, setting a thumbnail image(provided by common users, not generated by SharePoint automatically) for
that custom Picture column, in the Content Search Web Part, the thumbnail image will display.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
How to retrieve ascx file from the Template folder in SharePoint2013
My issue is, I have WSP only so I changed into zip and got my all web parts and also one dll file after that decrypted dll and got some C# code
mixing with some system generated code but not ascx file that is for front-end part. So my question is how we can retrieve full flash solution if not, at least ascx files So if we were on SharePoint 2010 we could have got those file from __Template__
folder but It’s on SharePoint 2013 and not able to get ascx.
If we can do so, than will be easy to get the task to be done
Suggestions would highly be appreciated. Thanks in Advance.
AshishHi Amit,
you can not move specific changes from Dev to production.
but you can follow this process to make your workflow as it is as in Dev:
Create a new workflow on the new list in Product.
Create at least one step, one condition and one action in this workflow.
1. In Dev server open your .xomal file as XML and copy the entire contents.
2.In Production server Open your .xoml file as XML and Paste the entire contents
3. repeat this operation for the xoml.rules file
4.Double click the .xoml file for the new workflow to open the workflow in the Workflow Designer and click Check Workflow to verify no errors and then click Finish to ensure the workflow is saved.
Whenever you need to make changes apply the same.
Please Mark Answer and Vote me if it will to resolve your issue -
Upload unicode file and display content in a textarea
Hi all,
I am trying to do the following;
1. upload a unicode file (file with some non-english characters)
2. after uploading, read the uploaded file and show the content in a textarea in a jsp page.
I use struts in my project. I use class org.apache.struts.upload.FormFile for uploading the file. The upload works fine. I do the upload with help of FormFile's getInputStream method. When i read and display the content in the textarea, the content is displayed junk. But i tried to open the uploaded file, its fine. I mean it is just as my source file. Please help me out for reading the uploaded unicode and displayed in a textarea.
Below is the code that i use to upload the file;
File tempFile = null;
FileOutputStream fos = null;
InputStream is = null;
try {
tempFile = "c:/ThaiText.txt";
fos = new FileOutputStream(tempFile);
is = theFile.getInputStream();
// Transfer bytes from in to out
byte[] buf = new byte[1024];
int len;
while ((len = is.read(buf)) > 0) {
fos.write(buf, 0, len);
logger.info("fileName$$=" + tempFile.getName());
} catch (Exception e) {
logger.error(e);
throw e;
} finally {
closeOutputStream(fos);
}Below is the code that i use for reading the uploaded file's content and store it to a string. I set this string to a form bean's string property.
public static String readContentNonUTF8(String path) {
FileInputStream fis = null;
String value = "";
try {
fis = new FileInputStream(path);
byte[] buf = new byte[1024];
int len;
while ((len = fis.read(buf)) > 0) {
String tmp = new String(buf, 0, len);
value = value.concat(new String(tmp.getBytes()));
} catch (Exception e) {
logger.error(e);
} finally {
try {
fis.close();
} catch (Exception e) {
return value;
}Hi,
Thanks for your reply. You meant that both method also can used to upload file and submit data? How about if i want to use the first method to upload file and submit data? How can i upload the file by using first method? -
To help community members troubleshoot issues efficiently, sometimes we need to collect related files (such as Event logs, Network traces, Setup
log files, Screenshots, etc.) to perform a specific analysis.
We can simply use SkyDrive, which is a free storage on Windows Live, it’s easy to store and share your files and photos with almost anyone. To make the
steps clear, I would like to share the detailed steps for:
1. How to use SkyDrive to upload collected files?
2. How to post screenshots or other pictures in forum threads?
1.
How to use
SkyDrive to upload collected files?
1)
Open the
SkyDrive site.
2)
In the
Sign In page, if you own a Windows Live ID, please type your Windows Live ID and Password to sign in; Otherwise, you may click Sign Up to register a new one. See the following screen shot.
3)
After signing in Windows Live, click Create folder.
4) Name
the folder and edit permissions to share with relevant person.
Important Note: You
can share the folder with Everyone if there is no private/sensitive information (such as the screen shot of a prompt error message). To so so, simply select the "Everyone (Public)" option in the "Share with" box. Please refer to the following screen shot:
However, for private information that you do NOT want to be accessed by everyone, it is recommended to share with specified individuals. To do so, you can expand the "Share with" box, choose the "Select people..." option, and then type their
Live IDs in the Individual box. Please refer to the screen shot below:
5)
Drag the previously collected files directly to the Skydrive folder. For example:
6)
Click Upload.
7)
Click on the uploaded files and tell us the URL.
2.
How to post screenshots or other pictures in forum threads?
(This section updated on 1/16/2012 to reflect changes in Skydrive. Thanks to
Jeeped on the Microsoft Answers forums)
1) Please
use the above method to upload the picture files in advance. Then, in your Skydrive space, Right Click the picture and select
View Original. Press Ctrl + A, or Right Click and select Copy, to select it.
2)
Press Ctrl + C to copy this picture.
3)
Navigate to your post textbox, and press Ctrl + V, or Right Click and select Paste, to paste the picture there.
Then, the picture will be successfully inserted in that thread.I cant even open windows now!!!! it crashes mecilessly here is a copy of the only dump file i have. i retreved it from second life and cant copy it onto the clip board.
Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7600.2.0.0.768.3 Locale ID:1033
Additional information about the problem: BCCode:124 BCP1:0000000000000000 BCP2:FFFFFA80050BE8F8 BCP3:0000000000000000 BCP4:0000000000000000 OS Version:6_1_7600 Service Pack:0_0 Product:768_1
Files that help describe the problem: C:\Windows\Minidump\073011-29484-01.dmp C:\Users\madamediva\AppData\Local\Temp\WER-72805-0.sysdata.xml
Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt
dump_pciidex.sysdump_pciidex.sys+216e730fffff880`01464000fffff8b0`014700000x000000300000c0000x4a5bc1137/13/2009 7:19:47 PMntoskrnl.exentoskrnl.exe+782e2fffff800`02a03000fffff800`02fe00000x005dd0000x4a5bc6007/13/2009 7:40:48 PMMicrosoft® Windows® Operating
SystemNT Kernel & System6.1.7600.16385 (win7_rtm.090713-1255)Microsoft CorporationC:\Windows\system32\ntoskrnl.exeACPI.sysfffff880`00f46000fffff880`00f9d0000x000570000x4a5bc1067/13/2009 7:19:34 PMamdxata.sysfffff880`00c6c000fffff880`00c770000x0000b0000x4a12f2eb5/19/2009
1:56:59 PMatapi.sysfffff880`00e59000fffff880`00e620000x000090000x4a5bc1137/13/2009 7:19:47 PMataport.SYSfffff880`00e62000fffff880`00e8c0000x0002a0000x4a5bc1187/13/2009 7:19:52 PMAtiPcie.sysfffff880`01fe8000fffff880`01ff00000x000080000x4a0054865/5/2009 11:00:22
AMBATTC.SYSfffff880`00e1e000fffff880`00e2a0000x0000c0000x4a5bc3b57/13/2009 7:31:01 PMCI.dllfffff880`00d1a000fffff880`00dda0000x000c00000x4a5be01d7/13/2009 9:32:13 PMCLASSPNP.SYSfffff880`01800000fffff880`018300000x000300000x4a5bc11e7/13/2009 7:19:58 PMCLFS.SYSfffff880`00cbc000fffff880`00d1a0000x0005e0000x4a5bc11d7/13/2009
7:19:57 PMcng.sysfffff880`01000000fffff880`010730000x000730000x4a5bc8147/13/2009 7:49:40 PMcompbatt.sysfffff880`00e15000fffff880`00e1e0000x000090000x4a5bc3b67/13/2009 7:31:02 PMcrashdmp.sysfffff880`01ff0000fffff300`01ffe0000xfffffa800000e0000x4a5bcabd7/13/2009
8:01:01 PMdisk.sysfffff880`01fd2000fffff880`01fe80000x000160000x4a5bc11d7/13/2009 7:19:57 PMdump_dumpfve.sysfffff880`01235000fffff87f`012480000xffffffff000130000x4a5bc18f7/13/2009 7:21:51 PMdump_msahci.sysfffff880`01470000fffff87f`0147b0000xffffffff0000b0000x4a5bcabd7/13/2009
8:01:01 PMfileinfo.sysfffff880`01145000fffff880`011590000x000140000x4a5bc4817/13/2009 7:34:25 PMfltmgr.sysfffff880`010f9000fffff880`011450000x0004c0000x4a5bc11f7/13/2009 7:19:59 PMFs_Rec.sysfffff880`0122b000fffff880`012350000x0000a0000x4a5bc1117/13/2009 7:19:45
PMfvevol.sysfffff880`01f98000fffff880`01fd20000x0003a0000x4a5bc1a77/13/2009 7:22:15 PMfwpkclnt.sysfffff880`01400000fffff880`0144a0000x0004a0000x4a5bc1647/13/2009 7:21:08 PMhal.dllfffff800`02fe0000fffff800`030290000x000490000x4a5bdf087/13/2009 9:27:36 PMhwpolicy.sysfffff880`01f8f000fffff880`01f980000x000090000x4a5bc0fa7/13/2009
7:19:22 PMkdcom.dllfffff800`00bd1000fffff800`00bdb0000x0000a0000x4a5bdfdb7/13/2009 9:31:07 PMkl1.sysfffff880`01830000fffff880`01f8f0000x0075f0000x4c0f985b6/9/2010 9:34:19 AMksecdd.sysfffff880`01200000fffff880`0121a0000x0001a0000x4a5bc1567/13/2009 7:20:54 PMksecpkg.sysfffff880`015d3000fffff880`015fe0000x0002b0000x4a5bc84a7/13/2009
7:50:34 PMmcupdate.dllfffff880`00c9b000fffff880`00ca80000x0000d0000x4a5bdf657/13/2009 9:29:09 PMmountmgr.sysfffff880`00e3f000fffff880`00e590000x0001a0000x4a5bc11a7/13/2009 7:19:54 PMmsahci.sysfffff880`00ff0000fffff880`00ffb0000x0000b0000x4a5bcabd7/13/2009
8:01:01 PMmsisadrv.sysfffff880`00fa6000fffff880`00fb00000x0000a0000x4a5bc0fe7/13/2009 7:19:26 PMmsrpc.sysfffff880`01165000fffff880`011c30000x0005e0000x4a5bc17c7/13/2009 7:21:32 PMmup.sysfffff880`01452000fffff880`014640000x000120000x4a5bc2017/13/2009 7:23:45
PMndis.sysfffff880`01481000fffff880`015730000x000f20000x4a5bc1847/13/2009 7:21:40 PMNETIO.SYSfffff880`01573000fffff880`015d30000x000600000x4bbe946f4/8/2010 10:43:59 PMNtfs.sysfffff880`0124c000fffff880`013ef0000x001a30000x4a5bc14f7/13/2009 7:20:47 PMpartmgr.sysfffff880`00e00000fffff880`00e150000x000150000x4a5bc11e7/13/2009
7:19:58 PMpci.sysfffff880`00fb0000fffff880`00fe30000x000330000x4a5bc1177/13/2009 7:19:51 PMPCIIDEX.SYSfffff880`00c5c000fffff880`00c6c0000x000100000x4a5bc1147/13/2009 7:19:48 PMpcw.sysfffff880`0121a000fffff880`0122b0000x000110000x4a5bc0ff7/13/2009 7:19:27 PMPSHED.dllfffff880`00ca8000fffff880`00cbc0000x000140000x4a5be0277/13/2009
9:32:23 PMMicrosoft® Windows® Operating SystemPlatform Specific Hardware Error Driver6.1.7600.16385 (win7_rtm.090713-1255)Microsoft CorporationC:\Windows\system32\PSHED.dllPxHlpa64.sysfffff880`01159000fffff880`01164e000x0000be000x4a4162536/23/2009
7:16:35 PMrdyboost.sysfffff880`010bf000fffff880`010f90000x0003a0000x4a5bc48a7/13/2009 7:34:34 PMspldr.sysfffff880`0144a000fffff880`014520000x000080000x4a0858bb5/11/2009 12:56:27 PMtcpip.sysfffff880`01602000fffff880`017ff0000x001fd0000x4bbe94e24/8/2010 10:45:54
PMvdrvroot.sysfffff880`00fe3000fffff880`00ff00000x0000d0000x4a5bcadb7/13/2009 8:01:31 PMvolmgr.sysfffff880`00e2a000fffff880`00e3f0000x000150000x4a5bc11d7/13/2009 7:19:57 PMvolmgrx.sysfffff880`00c00000fffff880`00c5c0000x0005c0000x4a5bc1417/13/2009 7:20:33 PMvolsnap.sysfffff880`01073000fffff880`010bf0000x0004c0000x4a5bc1287/13/2009
7:20:08 PMWdf01000.sysfffff880`00e93000fffff880`00f370000x000a40000x4a5bc19f7/13/2009 7:22:07 PMWDFLDR.SYSfffff880`00f37000fffff880`00f460000x0000f0000x4a5bc11a7/13/2009 7:19:54 PMWMILIB.SYSfffff880`00f9d000fffff880`00fa60000x000090000x4a5bc1177/13/2009 7:19:51
PM
Maybe you are looking for
-
How do I use my bluetooth headset with apple maps?
I can't seem to get apple's maps to talk to my headset -- it's only using it's own speaker (I don't have a bluetooth-enabled car). Any ideas?
-
HT201317 photo stream is not working, won't go to PC
I have 980 pics on my iPhone in the photo stream, not once has it ever sent photos to my PC folder and I've set up iCloud a LONG time ago. I want these pics because my PC crashed, so how do I get them back to PC if it won't upload them?
-
i have no issue with youtube uploads just facebook and pinterest images can anybody help thanks
-
Error While calling the AFL_WRAPPER_GENERATOR for Link prediction for PAL
Hi I try to do link prediction but it is giving the following error can some one help me on this CALL "HCP"."HCP_AFL_WRAPPER_GENERATOR"('PAL_LINK_PREDICTION_PROC','AFLPAL','LINKPREDICTION', NEO_XXXXX.PAL_LP_PDATA_TBL); [129]: transaction rolled back
-
320 gigabyte Harddisk is out in IDE 2,5 can I use it on a Nomad zen xtra??
Hi everbody 320 gigabyte Harddisk is out in ide 2,5 can I use it on a Nomad zen xtra? Or is it limitated to the ID Tags? In my old player Zen usb 2.0 I work with a 60 Gig but it recognised only 3 Gig with this 3 it works fine. :womanvery-happy: I hav