Uploaded Iphone 3GS to iOS 5 and lost internet connection (WiFi works)

I uploaded my Iphone 3GS to iOS 5 and lost 3G internet connection (WiFi works). Anybody has that same problem??
I lost all my music too. What I don't get is that when my iphone  is connected to Itunes, the music appears there (i even can play it), but the device doesn´t have it. I try to sync it but it doesn't work. What can I do?
Help please!!!

I went into Settings>General>Network>Cellular Data Network.and changed my APN in the 'Cellular Data' section from idata.o2.co.uk to wap.o2.co.uk. 
wap.02.co.uk will not work for you, that is my provider's setting.  I would contact Telcel and see what your APN settings should be, but I get the impression having read through many conversations now that the upgrade to iOS5 sometimes changes these settings.
I left the 'Visual Voicemail' and the 'MMS' settings the same and everything seems to be working ok...
Oh - and I did lose my music after.  I've managed to restore my purchased by going to the iTunes store on my phone and dowloading them all again.
Good luck, hope that sorts it.
B

Similar Messages

  • My iphone 3gs is disable and asked to connect with itunes

    my iphone 3gs is disable and asked to connect with itunes

    See this document
    iOS: Forgot passcode or device disabled

  • I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    Me too!!! It says check your Downloads, but unable to find Downloads...

  • HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    Resolve specific iTunes update and restore errors - Support - Apple
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

  • Just purchased Airport Extreme ac and lost internet connection 3X. Reset to factory settings and worked for 2 days then lost connection and remedied by unplugging power supply. Anyone else having problems?

    Just purchased Airport Extreme ac and lost internet connection 3X in less than one week. Fisrt time, reset to factory settings and fixed problem. Has occurred 2 additional times and connection re-established by unplugging AP extreme. Anyone else having these problems?  Do I have a bad router?  Thanks.

    I definitely think this is a Mavericks issue.  My iMac running Mavericks is the ONLY system in the house that drops the network randomly while all other systems never lose the network.  No idea how to resolve this, but here is the workaround I'm posting: 
    I've had the 'network drop' issue with my Airport Extreme for the last 2 months.  It reconnects when I pull the ethernet cable and plug it back in.  I've tried downgrading the AE firmware, resetting to factory, etc.  Nothing worked.  I finally threw in the towel and created a script that monitors my network connectivity and restarts my interface if it senses it has dropped:
    #!/bin/ksh
    while true
    do
      yup=`ping -c1 -t2 www.google.com|grep from`
      if [[ -n $yup ]]
         then echo "Internet is connected!"
      else
            ifconfig en0 down; ifconfig en0 up
            echo "Down at `date +%m%d%Y%H%M%S`">>./dropped.out
      fi
      sleep 5
    clear
    done
    I know its a workaround, but its saving me the headache of constantly pulling my cable and putting it back in!
    Good luck!
    -Mike Gray

  • Updated iPhone 3GS to iOS6 and lost all contacts

    I updated my iPhone 3GS to the new iOS6 yesterday. It took a while, but everything worked just fine. Today, I tried to do the same to my husband's phone, which is identical to mine. It extracted, but then would not restore. I see the apps that were removed from his phone, as well as the music, in iTunes; but all of his contacts are gone. I've tried every suggestion I can find online, and nothing is helping me locate them. When I right-click on his phone under the Devices header, the drop down doesn't give me the option to restore from backup; it just says Backup. Any help is GREATLY APPRECIATED.

    Actually.... contacts are part of an iTunes backup.
    You can verify that information here:
    http://support.apple.com/kb/HT4946
    But it seems the issue here is the fact that you can't find how to restore from a previously created backup. There is no button to hit to do so...
    You can go to Settings>General>Reset>Erase all content and settings (on your device)
    This will restart the setup assistant for you... and as you're going through you can select to restore your device from an iTunes backup.

  • HT5569 Updated my iPad to iOS 7.0.6 and lost internet connectivity.

    The iPad connects to the router. The router sees the iPad, the iPad sees the router. All other devices on router work and have internet. iPad has no internet activity. Completed restart, reset and not sure what else to do. Issue started immediately after upgrade to IOS 7.0.6.
    Any ideas would be helpful..

    Hello Robh700,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your iPad.  I recommend following the sections titled "Resolution" and "Unable to access the Internet while connected to Wi-Fi" in the following article for the issue you described:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Installed OSX 10.4.3 And Lost Internet Connection ! Help Please.

    I have posted this in the Tiger forum but know there is a lot of general expertise amongst FCE users (grovel, grovel!) and I only upgraded to Tiger so that I can get FCE 3.5 for this computer!
    I have updated from 10.3.9 (Panther) to 10.4.3 (Tiger) on my eMac.
    Everything appears OK except I cannot connect to the internet.
    On finishing the installation I got an error message saying "Could not load login file".
    Incidentally, during the installation I disconnected all peripherals including my USB Broadband "modem" (I can't remember the correct terminology).
    My "modem" is a "Speedtouch" and in the dock I have an application named "Diagnostics" which has to open to allow the Speedtouch to connect to the internet.
    "Diagnostics" will not open.
    When I look in my Network configurations the Speedtouch name has a red dot alongside and it is not connected.
    If I open Network Port Configurations the Speedtouch name is greyed out and cannot be selected.
    Any help would be appreciated.
    Ian.
    PS. Luckily my iMac internet connection is OK !

    Nope! I have nothing resembling a stingray or any other aquatic creature!
    OSX 10.4.3 was successfully installed thanks to the resolution of the above hiccup and I have now downloaded and installed the OSX 10.4.7 Combo update which brings my OS to "state of the art" status.
    I will now be able to install FCE 3.5 - if I can get round to parting with the cash!
    Then we'll see what everyone's talking about.
    Ian.

  • Time reset and lost internet connection

    Booted up this morning and got a message that the clock had reset to a date sometime prior to 2008 and had requests for access from xgridcontrollered, DNSResponder and 2 other things. Not having seen those items before, I denied access. After restarting modem, resetting the clock/time (manually) and restarting everything again, everything came back and I got connected to Internet. A Google of xgrid, et al, revealed that they are part of my OS, so I understand that. I'm just not sure how the clock got reset and created the issue in the first place.
    Any thoughts? My suspicion is that something happened to the modem connection overnight and it needed to be restarted. Computer came up and couldn't access Web to sync date and time and freaked out.

    The same thing happened to me after restart from the last Safari update. Mac restarted fine initially but then suddenly shut down with no warning and when it finally restarted again after a few attempts was set to Dec. 1969 which caused internet connection issues. Reset the date, reset the modem, soft reset the airport, and restarted. It then became apparent it was definitely the automatic time configuration in talking with apple that was causing the crash so I've also turned that off for the time being to avoid subsequent hangs and crashes. Not sure myself how it got reset, but stability is variable at this point.
    Processes hang unexpectedly and now the battery has gone from 95-100% charge to an 'X' in the toolbar. When I clicked on the X'd battery, it said the battery was not charging and then set to 0%. Now when I check on the battery charge information, however, it says the cycle is one. So now my question is, did this battery just coincidentally die at the exact same time as this other issue arose or is this somehow related? (The battery IS very old, but was generally between 96-100% when fully charged, as it was when this occurred. Also, other issues are present. Some may be related and some are likely not which adds to the confusion. The forum I originally visited to troubleshoot this was 72 pages long... modem/airport reset stopped erratic shut downs until the battery drained.)
    Both Safari and Firefox run now, but become increasingly slow with continued use.
    Message was edited by: Starlit Dreamer

  • I am getting an unable to connect error messagen when I start the browser. The setting is set to "no proxy" and my internet connection is working fine. What can I do to fix this?

    I opened up my firefox browser yesterday and it crashed. Since then I get an error message that says "unable to connect" every time I try to load the browser. The setting is set to "no proxy" So it should be connecting. My internet explorer browser is working fine. So I know it is not my internet connection. What can I do to make the firefox browser work again?

    Hi,
    Maybe the radio connection on the other end is not working. Hope this helps.
    xxmitchxx90

  • Network's IP Changed and lost internet connection

    So the IP Addresses of the computers in my networks are 10.188.99.100-199
    Suddenly we encountered power outage for a few seconds. After it my the computers ip addresses in the network is now different. And I cannot access the internet and network anymore.
    Help please, I've tried restarting the modem,router and switch still nothing happens

    You need to check layer by layer then....
    From where you get the DHCP IP?
    from where your NAT / PAT is done?
    Regards
    Karthik

  • My iphone 3Gs os frozen and won't connect to iTunes either! I tried shutting it off then turning it on but i still get a message saying that my phone was not able to connect properly. HELP!!! i can't use my phone at all!!

    Somebody help!
    I need my phone and its stuck in a black screen mode with only that circulating light thing in the middle
    SOMEBODY HELP!!!

    Try resetting it: hold on/off and home buttons simultaneously 10-15 seconds until you see the Apple logo, release and wait for it to restart.

  • How do I delete songs from iPhone 3GS? (iTunes and finger swipe doesn't work)

    I tried "Swipe to delete" but when I swipe, the delete red button doesn't show up.
    On iTunes, I tried selecting songs then pressing Ctrl+X or the Delete button but it doesn't help.
    anybody help?

    Well, I struggled with setting up an iPod last year for my mother using my sister's laptop and had to figure out how to NOT sync my sister's music...my mother was not thrilled with her tastes
    Once you have struggled through that you don't forget the pain.

  • HT4623 I updated my iPhone 3GS to ios 6 but it didn't work..how is that??

    ...its previous version is 4.2, and now i cannot activate my phone, it says there that it needs to have a sim card, but i placed one..and now it's still not activated..how is that?

    maybe the sim card is damaged ?
    or it's sim locked to another network

  • HT1725 Can I cancel my purchase and restart it? I bought the hangover 3 and lost internet connection and now it wont download at all. A bunch of errors keep coming up.

    Can I cancel my purchased movie and re-purchase it? The movie wont donwload and just comes up with errors.

    if it helps at all...
    I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
    and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
    ...is there any possible way that anybody can help me out with this.
    any help that anyone can offer is very greatly appreciated,
    Please & Thank You.

Maybe you are looking for

  • How to disconnect my iphone and ipod

    my ipod is connected to my iphone and i want to unloop it

  • Different sequence between original physical inventory doc & the one on RF

    Hi, We've implemented warehouse management with RF, the problem is, 1) I created one physical inventory docuemtn via tcode LX26,     there're 3 lines in the physical inventory docuement, and the   sequence is:     item 10, material A         item 20

  • How do I import .mp3 files on a CD to .m4a files in iTunes?

    I have several audio books that are .mp3 files on CDs. Since they are books, they work best in iTunes as .m4b files, which I can convert from .m4a, but when I import to iTunes, the files import as .mp3 files. There's lots of help to go from the .m4a

  • Cisco cat2960: large frames

    Hi All. I was checking my ports on errors on a subject switch and all was OK. but one ios command - "show controllers ethernet-controller <my interface>" has shown me that some ports have "Too large frames" in transmit section and "Valid Frames, too

  • Unable to install or update software

    I have an iMac Intel Core 2 Duo running on Mac OS X 10.6.4  I can't update existing software or install new software.  Every time I try the installation either does not occur (e.g. for the Mac OS X software or iTunes where the install occurs with a r