Uploading data on pc interfering with iPhone calls

If I am moving data from my hard drive to a network drive on my pc or vice versa, callers or recipients of my call state that my conversation on the verizon iphone 4 is interrupted - they can only understand every other word. As soon as data exchange is complete phone service returns to normal. I have a Verizon booster for phone service where I live, and DSL wireless internet service.
Has anyone else experienced this? It's a real showstopper for business calls.

You could use icloud to sync contacts and calendars.
Both the ipad and iphone are intended to sync to a computer.
You can redownload apps from the app store, assuming that they are iphone compatible.
Downloading past purchases from the iTunes Store, App Store, and ...

Similar Messages

While uploading data into the r/3 using call transaction or session method

hi experts
while uploading data into the r/3 using call transaction or session method error occured in the middle of the processing then how these methods behaves it transfers next records or not?

hai
Session method: The records are not added to the database until the session is processed. sy-subrc is not returned. Error logs are created for error records. Updation in database table is always Synchronous.
Call Transaction method: The records are immediately added to the database table. sy-subrc is returned to 0 if successful. Error logs are not created and hence the errors need to be handled explicitly. Updation in database table is either Synchronous or Asynchronous.
While to transfer the data from the through if any errors occurs until the errors are the complete the data is not transfer to the SAP system.
the system compulsory shows the errors. that errors are stored into the error logs (Transaction is SM35).
so the session method should not return any value.
In call transaction method data is directly pass to the SAP system.
So its compulsory return the value.
Because of the call transaction is the function.
A function should return the value mandatory
In session method errors stroed in SYSTEM GENRATED ERROR LOG.
IN CALL TRANSACTION TO CAPTURE THE ERRORS WE SHOULD PERFORM THE FOLLOWING.
FIRST ME MUST DECLARE AN INTERNAL TABLE WITH THE STRUCTURE OF BDCMSGCOLL TABLE.
THEN WHILE WRITING THE CALL TRANSACTION STATEMENT WE SHOULD PUT THE 'E' MODE FOR CAPTURING ALL THE ERRORS.
THEN FINALLY THE CAPTURED ERRORS MUST TO SENT TO THE INTERNAL TABLE WHICH WE DECLARED IN THE BEGINNING WITH BDCMSGCOLL BY USING THE FUNCTION MODULE "FORMAT_MESSAGE"
AND THUS THE ERROR MESSAGES WILL BE SENT TO THE INTERNAL TABLE WHICH WE DECLARED AT THE BEGINNING.

BDC for Uploading data from XL sheet with unknown order of fields

Hi SAP Gurus,
My requirement is as follows,
A BDC is to be developed for uploading data from an XL sheet, but the problem here is , the order of fileds in the sheet can be changed .
ie, for example the fields in the XL sheet are :-
matnr    maktx   menge amount
but the user can give as
matnr amount menge maktx
or
maktx   matnr amount menge
how i can solve this problem.
Thanks and Regards,
pavan.

Hi Pavan,
You need to handle it by your self, you can create a dynamic table based on the file value.
The field name pass from file with the record as a header, and based on the header name create your dynamic table.
afterward you can pass your value to BDC.
for creating dynamic table you can use this method
call method cl_alv_table_create=>create_dynamic_table
exporting
   i_style_table             =
    it_fieldcatalog           = it_field[]
   i_length_in_byte          =
importing
    ep_table                  = dyn_tab
   e_style_fname             =
exceptions
    generate_subpool_dir_full = 1
    others                    = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
             with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
-Dhirendra

Upload data thru LSMW -WBS with 3 levels

Hi PS Experts,
My situation is like I have to upload data thru LSMW for all Levels! As I m doing for only L3 WBS with PD it is going upto 14 steps and executing.But for Level 2 and Level 3 it is not executing. In the Step "Read Data" it is showing blank.
Can v upload these multilevel data thru LSMW? or how is like?
Thanks in advance,
Sanju..

Hi Virendra,
I think that your solution is very good for my purpose.
But in my implementation there is no way to insert a new element in an existing WBS, I can only edit attributes for an element already created, for example, in cj02.
I checked all the menus but i didn't find any useful command.
Could you send me a screenshot of the keypoint in which you can create the element different from the first level?
Thank you very much.
Giorgio

SQLLoader: Uploading data file name along with data

I am using Oracle SQLLoader to upload my data from CSV files into a single table. My current CTL file is as follows:
LOAD DATA
INFILE 'trace_metals100.csv'
INFILE 'trace_metals101.csv'
APPEND
INTO TABLE TRACE_METALS
FIELDS TERMINATED BY ','
(STATION_NO, METAL_NAME, METAL_WT)
Just for my record I want to upload the data file name also along with the data into a fourth column. How should I do it using SQLLoader??
Regards,
Moiz

Do two loads using two separate control files:
LOAD DATA
INFILE 'trace_metals100.csv'
APPEND
INTO TABLE trace_metals
FIELDS TERMINATED BY ','
TRAILING NULLCOLS
(station_no,
metal_name,
metal_wt,
fourth_column_name CONSTANT trace_metals100.csv)
LOAD DATA
INFILE 'trace_metals101.csv'
APPEND
INTO TABLE trace_metals
FIELDS TERMINATED BY ','
TRAILING NULLCOLS
(station_no,
metal_name,
metal_wt,
fourth_column_name CONSTANT trace_metals101.csv)

Can security programs on pc interfer with iphone syncing

Recently changed my home page to Start Page the Worlds Most Private Search Engin, upgraded Norton Security Suite, installed CCleaner and Constant Guard. Could any of these program not allow iphone to sync pictures or videos to PC? When I plug iphone into PC to sync, the syncing process starts but skips the installation of my pictures and videos, instead my computer makes a churping noise.

Hey kstorey64
It can, check out the following articles for troubleshooting syncing with other security software installed.
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/TS3125
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for using Apple Support Communities.
Regards,
-Norm G.

RADIO SIGNALS ARE INTERFERING WITH MY CALLS HELP!!...

hi guys i've been using skype for almost 2 years now and all has been well until today.
when ever i call someone the other person always seems to hear an foreign radio station and it overpowering my voice so they cant hear me
PLEASE HELP!!!!
cheers

That generally means your computer equipments is picking up interference. You should try a different headset/mic or plugging into another audio/USB jack if that option exists. Try plugging your computer into a different set of outlets or temporarily move your computer to see if it goes away. Any of your computer equipment could be picking up interference from a variety of sources (any electronic equipment, shared electrical outlet or baby monitors in the area). Headphones/mics after all are antennas/powered antennas.

Upload data from excel with vba by calling a function module

Hello all,
i have a problem with the function module "ALSM_EXCEL_TO_INTERNAL_TABLE". I will call this function module with vba to load data from excel to sap with a Buttonclick. I have copied this function module and set it remotable. But i can´t call it from excel.
Can you give me some tips how can i
upload data from excel with vba by click a button.
The problem seems the function: call method cl_gui_frontend_services=>clipboard_import in the function module, because when i comment this function call the vba-call is true but no results.
How can I call the function module correct with vba?
Thanks a lot for your tips!!!!
Chris
Message was edited by:
        Christoph Kirschner

HI
Uploading data directly from Excel file format
* Upload data direct from excel.xls file to SAP
REPORT ZEXCELUPLOAD.
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
            begcol TYPE i DEFAULT 1 NO-DISPLAY,
            begrow TYPE i DEFAULT 1 NO-DISPLAY,
            endcol TYPE i DEFAULT 100 NO-DISPLAY,
            endrow TYPE i DEFAULT 32000 NO-DISPLAY.
* Tick don't append header
PARAMETERS: kzheader AS CHECKBOX.
DATA: BEGIN OF intern OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern.
DATA: BEGIN OF intern1 OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern1.
DATA: BEGIN OF t_col OCCURS 0,
       col LIKE alsmex_tabline-col,
       size TYPE i.
DATA: END OF t_col.
DATA: zwlen TYPE i,
      zwlines TYPE i.
DATA: BEGIN OF fieldnames OCCURS 3,
        title(60),
        table(6),
        field(10),
        kz(1),
      END OF fieldnames.
* No of columns
DATA: BEGIN OF data_tab OCCURS 0,
       value_0001(50),
       value_0002(50),
       value_0003(50),
       value_0004(50),
       value_0005(50),
       value_0006(50),
       value_0007(50),
       value_0008(50),
       value_0009(50),
       value_0010(50),
       value_0011(50),
       value_0012(50),
       value_0013(50),
       value_0014(50),
       value_0015(50),
       value_0016(50),
       value_0017(50),
       value_0018(50),
       value_0019(50),
       value_0020(50),
       value_0021(50),
       value_0022(50),
       value_0023(50),
       value_0024(50),
       value_0025(50),
       value_0026(50),
       value_0027(50),
       value_0028(50),
       value_0029(50),
       value_0030(50),
       value_0031(50),
       value_0032(50),
       value_0033(50),
       value_0034(50),
       value_0035(50),
       value_0036(50),
       value_0037(50),
       value_0038(50),
       value_0039(50),
       value_0040(50),
       value_0041(50),
       value_0042(50),
       value_0043(50),
       value_0044(50),
       value_0045(50),
       value_0046(50),
       value_0047(50),
       value_0048(50),
       value_0049(50),
       value_0050(50),
       value_0051(50),
       value_0052(50),
       value_0053(50),
       value_0054(50),
       value_0055(50),
       value_0056(50),
       value_0057(50),
       value_0058(50),
       value_0059(50),
       value_0060(50),
       value_0061(50),
       value_0062(50),
       value_0063(50),
       value_0064(50),
       value_0065(50),
       value_0066(50),
       value_0067(50),
       value_0068(50),
       value_0069(50),
       value_0070(50),
       value_0071(50),
       value_0072(50),
       value_0073(50),
       value_0074(50),
       value_0075(50),
       value_0076(50),
       value_0077(50),
       value_0078(50),
       value_0079(50),
       value_0080(50),
       value_0081(50),
       value_0082(50),
       value_0083(50),
       value_0084(50),
       value_0085(50),
       value_0086(50),
       value_0087(50),
       value_0088(50),
       value_0089(50),
       value_0090(50),
       value_0091(50),
       value_0092(50),
       value_0093(50),
       value_0094(50),
       value_0095(50),
       value_0096(50),
       value_0097(50),
       value_0098(50),
       value_0099(50),
       value_0100(50).
DATA: END OF data_tab.
DATA: tind(4) TYPE n.
DATA: zwfeld(19).
FIELD-SYMBOLS: <fs1>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            mask      = '*.xls'
            static    = 'X'
       CHANGING
            file_name = filename.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = filename
            i_begin_col             = begcol
            i_begin_row             = begrow
            i_end_col               = endcol
            i_end_row               = endrow
       TABLES
            intern                  = intern
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
IF sy-subrc <> 0.
    WRITE:/ 'Upload Error ', SY-SUBRC.
ENDIF.
END-OF-SELECTION.
LOOP AT intern.
    intern1 = intern.
    CLEAR intern1-row.
    APPEND intern1.
ENDLOOP.
SORT intern1 BY col.
LOOP AT intern1.
    AT NEW col.
      t_col-col = intern1-col.
      APPEND t_col.
    ENDAT.
    zwlen = strlen( intern1-value ).
    READ TABLE t_col WITH KEY col = intern1-col.
    IF sy-subrc EQ 0.
      IF zwlen > t_col-size.
        t_col-size = zwlen.
*                          Internal Table, Current Row Index
        MODIFY t_col INDEX sy-tabix.
      ENDIF.
    ENDIF.
ENDLOOP.
DESCRIBE TABLE t_col LINES zwlines.
SORT intern BY row col.
IF kzheader = 'X'.
    LOOP AT intern.
      fieldnames-title = intern-value.
      APPEND fieldnames.
      AT END OF row.
        EXIT.
      ENDAT.
    ENDLOOP.
ELSE.
    DO zwlines TIMES.
      WRITE sy-index TO fieldnames-title.
      APPEND fieldnames.
    ENDDO.
ENDIF.
SORT intern BY row col.
LOOP AT intern.
    IF kzheader = 'X'
    AND intern-row = 1.
      CONTINUE.
    ENDIF.
    tind = intern-col.
    CONCATENATE 'DATA_TAB-VALUE_' tind INTO zwfeld.
    ASSIGN (zwfeld) TO <fs1>.
    <fs1> = intern-value.
    AT END OF row.
      APPEND data_tab.
      CLEAR data_tab.
    ENDAT.
ENDLOOP.
CALL FUNCTION 'DISPLAY_BASIC_LIST'
       EXPORTING
            file_name     = filename
       TABLES
            data_tab      = data_tab
            fieldname_tab = fieldnames.
*-- End of Program
<b>Excel Upload Alternative - KCD_EXCEL_OLE_TO_INT_CONVERT</b>
*Title : Excel Uploading
TYPES:   BEGIN OF t_datatab,
         col1(25) TYPE c,
         col2(30) TYPE c,
         col3(30) TYPE c,
         col4(30) TYPE c,
         col5(30) TYPE c,
         col6(30) TYPE c,
         col7(30) TYPE c,
         col8(30) TYPE c,
         col9(30) TYPE c,
         col10(30) TYPE c,
         col11(30)    TYPE c,
       END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
      wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol   TYPE i VALUE '1',
       gd_srow   TYPE i VALUE '1',
       gd_ecol   TYPE i VALUE '256',
       gd_erow   TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
      gd_subrc TYPE i.
field-symbols : <fs>.
*Selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename
               DEFAULT 'c:test.xls' OBLIGATORY.   " File Name
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title     = 'Select File'
      default_filename = '*.xls'
      multiselection   = ' '
    CHANGING
      file_table       = it_tab
      rc               = gd_subrc.
LOOP AT it_tab INTO p_file.
*    so_fpath-sign = 'I'.
*    so_fpath-option = 'EQ'.
*    append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES   it_datatab
                             USING   p_file
                                     gd_scol
                                     gd_srow
                                     gd_ecol
                                     gd_erow.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
    WRITE:/ wa_datatab-col1,
            wa_datatab-col2,
            wa_datatab-col3,
            wa_datatab-col4,
            wa_datatab-col5,
            wa_datatab-col6,
            wa_datatab-col7,
            wa_datatab-col8,
            wa_datatab-col9,
            wa_datatab-col10,
            wa_datatab-col11.
ENDLOOP.
*&      Form UPLOAD_EXCEL_FILE
*       upload excel spreadsheet into internal table
*      -->P_TABLE    Table to return excel data into
*      -->P_FILE     file name and path
*      -->P_SCOL     start column
*      -->P_SROW     start row
*      -->P_ECOL     end column
*      -->P_EROW     end row
FORM upload_excel_file TABLES   p_table
                       USING    p_file
                                p_scol
                                p_srow
                                p_ecol
                                p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
* Has the following format:
*             Row number   | Colum Number   |   Value
*      i.e.     1                 1             Name1
*               2                 1             Joe
DATA : ld_index TYPE i.
* Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename                = p_file
      i_begin_col             = p_scol
      i_begin_row             = p_srow
      i_end_col               = p_ecol
      i_end_row               = p_erow
    TABLES
      intern                  = LT_INTERN
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'Error Uploading file'.
    EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'No Data Uploaded'.
    EXIT.
ELSE.
    SORT lt_intern BY row col.
    LOOP AT lt_intern.
     MOVE lt_intern-col TO ld_index.
     assign component ld_index of structure
     p_table to <fs>.
move : lt_intern-value to <fs>.
*     MOVE lt_intern-value TO p_table.
      AT END OF row.
        APPEND p_table.
        CLEAR p_table.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.                    "UPLOAD_EXCEL_FILE
Regards
Pavan

Voice calls breaking up on EDGE with iphone and AT&T

When I am on a voice call using the iPhone on EDGE the callers voice often breaks up. This also happens when I dial voicemail and listen to messages.
This is my first time using AT&T. Is this normal for AT&T's EDGE network or is this possibly a problem with my iPhone. This happens even if I have full bars on EDGE. I've tried resetting the phone as new and getting a new sim card and updating the firmware but voices still break up. Has anyone else experienced this?

I got a replacement iphone and the problem with voice calls breaking up persists. I have no idea what the problem is since there are so many variables and I don't have all the information. I just know that I never had this sort of problem in the 9 years I was on Verizon with any phone. I really enjoy this device for everything besides the phone functionality. It would be cool if I could just pay for data on this phone without the voice so I could get a Verizon phone for voice and keep the iphone for data but I know that would never happen. Well, I still have a couple weeks to figure out what I'm going to do.

Upload data from excel to Ztable with statistics

Hi,
I have a requirement to upload data from excel sheet to ztable .
Here i need tp provide the user with the execution statistics like
1.Number of records read from the Excel spread-sheet
2. Number records processed successfully
3. Number records with Error
4. Name and location of Error Log-file (text-file format)
5. Name and location of the file containing error records (Excel spread-sheet format)
I would appreciate if any of you have code written for the same

See the below example code to upload from xl file to sap
REPORT ZLWMI151_UPLOAD no standard page heading
                       line-size 100 line-count 60.
*tables : zbatch_cross_ref.
data : begin of t_text occurs 0,
       werks(4) type c,
       cmatnr(15) type c,
       srlno(12) type n,
       matnr(7) type n,
       charg(10) type n,
       end of t_text.
data: begin of t_zbatch occurs 0,
      werks like zbatch_cross_ref-werks,
      cmatnr like zbatch_cross_ref-cmatnr,
      srlno like zbatch_cross_ref-srlno,
      matnr like zbatch_cross_ref-matnr,
      charg like zbatch_cross_ref-charg,
      end of t_zbatch.
data : g_repid like sy-repid,
       g_line like sy-index,
       g_line1 like sy-index,
       $v_start_col         type i value '1',
       $v_start_row         type i value '2',
       $v_end_col           type i value '256',
       $v_end_row           type i value '65536',
       gd_currentrow type i.
data: itab like alsmex_tabline occurs 0 with header line.
data : t_final like zbatch_cross_ref occurs 0 with header line.
selection-screen : begin of block blk with frame title text.
parameters : p_file like rlgrap-filename obligatory.
selection-screen : end of block blk.
initialization.
g_repid = sy-repid.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            PROGRAM_NAME = g_repid
       IMPORTING
            FILE_NAME    = p_file.
start-of-selection.
Uploading the data into Internal Table
perform upload_data.
perform modify_table.
top-of-page.
CALL FUNCTION 'Z_HEADER'
EXPORTING
    FLEX_TEXT1       =
    FLEX_TEXT2       =
    FLEX_TEXT3       =
*&      Form upload_data
      text
FORM upload_data.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            FILENAME                = p_file
            I_BEGIN_COL             = $v_start_col
            I_BEGIN_ROW             = $v_start_row
            I_END_COL               = $v_end_col
            I_END_ROW               = $v_end_row
       TABLES
            INTERN                  = itab
       EXCEPTIONS
            INCONSISTENT_PARAMETERS = 1
            UPLOAD_OLE              = 2
            OTHERS                  = 3.
IF SY-SUBRC <> 0.
    write:/10 'File '.
ENDIF.
if sy-subrc eq 0.
    read table itab index 1.
    gd_currentrow = itab-row.
    loop at itab.
      if itab-row ne gd_currentrow.
        append t_text.
        clear t_text.
        gd_currentrow = itab-row.
      endif.
      case itab-col.
        when '0001'.
          t_text-werks = itab-value.
        when '0002'.
          t_text-cmatnr = itab-value.
        when '0003'.
          t_text-srlno = itab-value.
        when '0004'.
          t_text-matnr = itab-value.
        when '0005'.
          t_text-charg = itab-value.
      endcase.
    endloop.
endif.
append t_text.
ENDFORM.                    " upload_data
*&      Form modify_table
      Modify the table ZBATCH_CROSS_REF
FORM modify_table.
loop at t_text.
    t_final-werks = t_text-werks.
    t_final-cmatnr = t_text-cmatnr.
    t_final-srlno = t_text-srlno.
    t_final-matnr = t_text-matnr.
    t_final-charg = t_text-charg.
    t_final-erdat = sy-datum.
    t_final-erzet = sy-uzeit.
    t_final-ernam = sy-uname.
    t_final-rstat = 'U'.
    append t_final.
    clear t_final.
endloop.
delete t_final where werks = ''.
describe table t_final lines g_line.
sort t_final by werks cmatnr srlno.
Deleting the Duplicate Records
perform select_data.
describe table t_final lines g_line1.
modify zbatch_cross_ref from table t_final.
if sy-subrc ne 0.
    write:/ 'Updation failed'.
else.
    Skip 1.
    Write:/12 'Updation has been Completed Sucessfully'.
    skip 1.
    Write:/12 'Records in file ',42 g_line .
    write:/12 'Updated records in Table',42 g_line1.
endif.
delete from zbatch_cross_ref where werks = ''.
ENDFORM.                    " modify_table
*&      Form select_data
      Deleting the duplicate records
FORM select_data.
select werks
         cmatnr
         srlno from zbatch_cross_ref
         into table t_zbatch for all entries in t_final
         where werks = t_final-werks
         and cmatnr = t_final-cmatnr
         and srlno = t_final-srlno.
sort t_zbatch by werks cmatnr srlno.
loop at t_zbatch.
    read table t_final with key werks = t_zbatch-werks
                                cmatnr = t_zbatch-cmatnr
                                srlno = t_zbatch-srlno.
    if sy-subrc eq 0.
      delete table t_final .
    endif.
    clear: t_zbatch,
           t_final.
endloop.
ENDFORM.                    " select_data
Reward Points if it is helpful
Thanks
Seshu

When iPhone is on Cellular data and WiFi, i cannot make calls and phone goes out of service.

So I have this iPhone 5S unlocked version from the US which I am using in India. When I am connected to my office wireless and also the cellular & 3G data are switched on, my phone goes out of service and I cannot make calls. I can also use internet.
However this works great when I get onto my home WiFi along with cellular & 3G data switched on, I can make calls and also surf the net with the WiFi.
Is anyone having similar issue? I am sure there is something with the office WiFi but what could it be to get my phone out of service.
Any thoughts anybody ?
Thanks,
UG

Yes I shutdown WiFi and I can connect to 3G on Cellular. I can make calls.
If I shutdown Cellular and connect WiFi. I can make calls.
Its just that when both are ON, then no calls can be made.
All combinations work good with Home WiFi.
-UG

Problems with conference calls(adding and merging calls) after upgrade to ios 8.1.2 on iphone 5s

I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
Some of the scenarios that I have experienced is:
1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
2. Sometimes the second number gets dialed, cannot merge the calls.
3. After talking to the second person, cannot go back to the first call.
I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
Anyone experienced this before? Any suggestions?

Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
iPhone 6; iOS 8.1.3; Carrier: Verizon

This isn't a question but rather a warning to anyone using the new OS for iphone 4. The imessage uses up your data plan like crazy. I called Apple about it and they said no it's not doing it. I called AT

The new OS is burning through my data plan like crazy and here's why. Imessage uses your data plan and not your texting plan. So every time you send a text message to someone with an iphone it uses imessage and it uses your data, not your text plan. I couldn't figure out why I was burning through so much of my data plan so quickly. I called Apple and they said, no it's not the data plan doing it. I called AT&T and they said, yes, the imessage uses data instead of your texting plan if you are texting to another iphone. Also, the new OS runs your apps all the time, even when you aren't using them. So if you are not near wifi your apps are running and burning your data plan. The AT&T guy took me through the steps to turn off the apps. You can still use them but they won't be running constantly. Seriously Apple, you should let people know this. It does say it in the fine print on the website "data rates may apply" under imessage but most people will never read this. So my data plan started on October 10th and it's already at 175 megabytes and I only have a 200 megabyte plan. I've never used more than 50 to 75 megabytes in a month. Apple get it together and be honest with people and tell them. Quit denying the problem. Most people have probably not even discovered this yet. Wait till you get your bill.

kimmie92592 wrote:
It's not really common knowledge because I've talked to several people today and none of them knew about it. Also, when I called Apple they said no the new OS is not using data. Totally wrong answer. You'd think they'd know about it and at least tell people. The people who are going to be hit by this are people like me with the 200mb plans. I just think it's best to spread the word so people can know what's happening. I still don't know how I went through so much data in such a short period of time. It's not happening anymore though, not since I fixed everything up last night.
If you are using a free wifi connection, there are no data charges with iMessage. But in an area where you did NOT have a wifi connection, of course it used 3G and of course you got charged for it (or had it count against your plan limits).
I'll ask again - without a wifi connection, just what did you think was happening? How did you think your iPhone was able to magically send a message WITHOUT using any data connection? A little bit of rational thought would have made you realize that there was no way, over a 3G connection (which is a service provided by your cellular service provider, NOT Apple), that you can send or receive ANYTHING without your service provider's plan picking it up.
Nothing abut iMessage has ever hinted that it can, in any way, bypass your service provider when NOT using a wifi connection.

How to upload data with dynamic internal table

Hi,
I have to upload the basic , sales, purchasing view data by using bapi depend on check box selected for views.
i have filled fieldcatalog for selected views and pass the field catalog structure to dynamic int table and
import it into the field symbol <fs_data>. this field symbol assigned to <fs_1>.
then callED the 'GUI_UPLOAD ' and when i pass field symbo for function module i am getting first 10 rows 0f the file .
flat file has basic data,sales ,purchase fields data
ex: i was selected basicview and purchase view and execute i am getting basic,sales view data.
how can i get only basic and purchase data.

hi ,
please find code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog           = lt_fieldcatalog
    IMPORTING
      ep_table                  = <fs_data>
    EXCEPTIONS
      generate_subpool_dir_full = 1
      OTHERS                    = 2.
IF sy-subrc <> 0.                                         "#EC NEEDED
ENDIF.
So <FS_1> now points to our dynamic internal table.
ASSIGN <fs_data>->* TO <fs_1>.
Next step is to create a work area for our dynamic internal table.
CREATE DATA new_line LIKE LINE OF <fs_1>.
A field-symbol to access that work area
ASSIGN new_line->* TO <fs_2>.
ASSIGN new_line->* TO <fs_3>.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = p_f
      filetype                = 'DAT'
    TABLES
      data_tab                = <fs_1>
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

To upload a data into SAP Table with the help of RFC function in BODS

Hi,
Please provide me step-by-step solution to upload data into any SAP table with the help of RFC function in Data Services.
I have created RFC function that upload data into SAP table. RFC Function contains one table that has same structure as my database table.
In the data services how can i filled the table of RFC function, i am using this function in query transform of data services but it gives me error.
I am also follow link http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsDataServicesTipsand+Tricks
but it did not help me.
Thanks,
Abhishek

Hi Abhishek,
Did you import the function module in the SAP datastore first? When you open the SAP datastore, the function should be listed in the 'functions' section. If not, import it. Make sure your function is remote executable.
Once the function is there, you can use it in a transformation. In 'Schema Out' right-click on 'Query' (top level) and choose 'New Function Call'. You can then select a datastore and a function in the datastore. The wizard will show you which output parameters are available. I believe you have to add at least one and can select as many as you like.
After confirming your selection the function and the output parameters appear in Schema Out. You can then right-click on the function and choose 'Modify function call'. A popup will appear where you can specify the input parameters.
I hope this helps.
Jan.

Uploading data on pc interfering with iPhone calls

Similar Messages

Maybe you are looking for