Uploading data using portals

Hello Gurus,
in my program i am using 'KCD_EXCEL_OLE_TO_INT_CONVERT' as a function module to upload the file and it is working very good when i am uploading the data through GUI and now i am trying to upload the data using portal it is not working at all. can anybody give me the solution how to upload the data using portal or which function module i have to use. i will appreciate it
thanks

HI Sulleman,
please chk these link. i hope they will help you.
Pls use BW07 & BW10 Tcodes for generating the Hierarchy Data Source in R/3.
If its a set of hierarchy you can use tcode BW07 to generate datasoucre, and for standard hierachies you must be having datasources already created.
Now just replicate datasoucre in BW side, and in infopckage selection you can get newly created hierarchy. Select and schedule it, it will be loaded into BW.
For External Hierarchy in BW , download to Flatfild and then upload.
The useful link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
material hierarchy data source
and:
How to create a hierarchy datasource in R/3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
/thread/107051 [original link is broken]
how to upload bsp application on existing portal
thanks
shankar
reward me if usefull

Similar Messages

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

How to upload data using SXDA Transaction

HI,
Can any one explain step by step procedure to upload data using SXDA transaction.
I have already uploaded to txt file in Application server.
I have created a project and entered into the sub-project wizard and selected the object type as BKPF and then pressed continue, then i enter into task tab....
There i see convert data , Check file,File split,load data,
In convert data i have selected the program name as RFBIBL00.
In check file i have selected the file type as Physical file and selected the file name from F4 button.
I am fasing the probelm in load data ....
Can any one please explain how to proceed further..

Hi Yogesh,
Use this function module
ALSM_EXCEL_TO_INTERNAL_TABLE to upload the excel sheet data into internal table.
Then from the internal table data use KE13 transaction to upload data.
Regards
Arun

How to upload data using utl_file when you dont know the exact file name

Hi
i want to upload data from a flat file to a table.
i dont know the exact file name. i want to make a search for filename. like i want to make a search on file (say test*) which will give me all the files with test.
i want to upload data using these files.
how can i do this by using UTL_FILE.
Regards
Manish

Thank you very much.
Thing is previously we are using sqlloader and shell script for loading the data.
now i am creating a procedure (if possible without parameters).
Is there any other way i can do that.
can i make a wild card search using utl_file.
Thanks n Regards
Manish

UPload data useing BDC for cost element allocation

Hi ALL,
i have to upload data useing BDC , have to upload data for cost centre accloction table ,What is the T.code and how to do it, i have knows LSMW,
very useful for me
Advance Thanks
Narra

Using BDC means...use theTCODE: SHDB + ABAPer help, it requires program need to create for this....you can have options in BDC is...u can test the data validity before you upload the data
VVR

Upload data using BDC

Hi Expert,
How to upload data using BDC. I have uploaded using LSMW....now want to know how to upload data using BDC

HI
Ask your Abapper.
First you have to record in SHDB. then you have to generate the program and write the code in SE38
For more details please make a search
regards
Prashanth

For transaction code MD61, I want to upload data using BAPI

Hi,
for transaction code MD61, I want to upload data using BAPI.
Which BAPi I ll call ?
Can anyone suggest me how to do it with any simple example program ?

Refer the thread for details about coding-
BAPI_REQUIREMENTS_CREATE
Reards,
Amit

Which method is easiest for uploading data using LSMW?

which method is easiest for uploading data using LSMW (Direct method or batch input method) bcs I am facing lot of problem using batch input method while recording.Even I cannot use direct method using standard program.can anyone tell me some other easiest way for uploading MM01.?

I personally used the direct input way 6 years ago and it was a little bit of a struggle cause I was very new to SAP at the time. But it worked out to be ok in the end. You just have to keep messing with it till the errors are clear and then you can upload for real. The test mode is a nice touch, you can get rid of all of the errors before actually uploading the data.
Regards,
Rich Heilman

Getting error while uploading data using the EXCEL( GUI_upload)

Dear Freinds,
I am uploading data from my excel sheet to my Custom table . I am using the below code
call function 'GUI_UPLOAD'
exporting
filename = l_fn
filetype = 'BIN' "'ASC'
has_field_separator = 'X'
tables
data_tab = p_i_ins_db
exceptions
others = 17.
i can see in my internal P_i_ins_db ...all the data is coming in encrypted format.
The flat given to me is the .CSV file .
Could any one please let me know how i can upload the data which is there in .csv file.
regards
syamala

Hi Syamala,
Before using the GUI_UPLOAD to upload the data from the excel file to the internal table,you can try usng the Function Module 'SAP_CONVERT_TO_TEX_FORMAT' or 'SAP_CONVERT_TO_CSV_FORMAT' as it helps n formatting the data.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Difference between uploading data using BDC,CATT

Dear experts,
what is the difference between uploading the data using BDC and CATT tool?
is it only the coding or something else.
and can you explain the situations where we prefer to upload the data using CATT tool.
thanks in advance.

Check this thread -
Differences between BDC , LSMW, BAPI,CATT
Regards,
Amit

In RFC how to uploading data using bdc

Hi, Experts
In RFC how to use bdc program for uploading data
any example plz.
my requrement for tcode ME21.
thank you in advance.
with best regards
sai

Thank u reply
my requirement is in function moudle
( Program will be called from non-sap system with the data in the form of table as per the structure given above. Then the program will do the some validation for the data. If data validated correct, BDC will be run for creating DO
condition is )
ex:
if T_itab KNTTP = K,
Run BDC for transaction ME21.
( in that you should not use upload and ws_upload )
in put paramer is taking value for structure (non- sap ) run the bdc update in sap system.
plz any sample program
regards
sai

UPLOADING DATA USING BAPI_DOCUMENT_CREATE2

Hi Friends,
I am uploading data for CV01N using FM "BAPI_DOCUMENT_CREATE2",
it is updating the data successfully,
but for my requirement i need to change the value of
RC29P-POSTP     Bom Item Category in the DOCUMENT STRUCTURE , it is default taking as "D", my requirement with "T" also.
I am not finding the correct field in the Function module to mapp this POSTP (Bom Item Category ).
Can any one suggest, as its urgent.
Otherwise can any one suggest FM to create DOCUMENT STRUCTURE ( CV11 ) with above requirement.
Regards,
Sivaram.
Message was edited by:
        Sivaram Prasad Gadde
Message was edited by:
        Sivaram Prasad Gadde

Hi Frank,
Did you manage to figure out what the problem was?
Thank you.
Regards,
Bruno

Flat file to upload data using BDC for transaction MM01

Hi
I am trying to update data using bdc code has been attached below using a txt file.
It is updating the first set of data into the table mara ,but for the rest it is not
All the data from txt file has being loaded to internal table , but the problem is it does not gets updated from internal table to the database .
Only the first set of data has been loaded , rest of the data is not loaded
content of txt file
zsc zsc kg
zsv zsv kg
zsb zsb kg
Actual code
report ZMAT_UPLOAD
 no standard page heading line-size 255.
types declaration..........................................................................
types : begin of t_mat,
 matnr(20),
 desc(50),
 uom(5),
end of t_mat.
internal table and workarea declaration.......................................
data : i_mat type table of t_mat.
data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
 EXPORTING
 FILETYPE = 'DAT'
 TABLES
 data_tab = i_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
 'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
 '=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
 wa_mat-matnr.
perform bdc_field using 'RMMG1-MBRSH'
 'P'.
perform bdc_field using 'RMMG1-MTART'
 'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
 'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
 '=BU'.
perform bdc_field using 'MAKT-MAKTX'
 wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
 'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
 wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
 'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.

Hi Sumant,
just concentrate on bold one
report ZMAT_UPLOAD
no standard page heading line-size 255.
types declaration..........................................................................

data : begin of t_mat occurs 0,
matnr(20),
desc(50),
uom(5),
end of t_mat.
internal table and workarea declaration.......................................
*data : i_mat type table of t_mat.
*data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
EXPORTING
FILETYPE = 'DAT'
TABLES
data_tab = i_mat.---> t_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.------>loop at t_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
wa_mat-matnr.---->t_mat-matnr(change in this for ur wa to t_mat.
perform bdc_field using 'RMMG1-MBRSH'
'P'.
perform bdc_field using 'RMMG1-MTART'
'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.
Reward points for helpful answers.
Thanks
Naveen khan
Message was edited by:
 Pattan Naveen
Message was edited by:
 Pattan Naveen

Problem during uploading data Using BDC

While I'm trying to upload data for T.Code J1IS using BDC, Value for the field Net.***.value ( J_1IASSVAL-J_1IVALNDP) is not getting populated on the screen.
Pls help.

Hi,
This is a Currency Field so you need to pass this to a Char field first and then pass to BDCTAB-FVAL.
" This is a common problem with BDC with other data types even with Date and Quantity and Numeric types
Please note while passing values to BDCTAB all the values should be passed in CHAR form only
Cheerz
Ram.

Upload data using 'GUI_UPLOAD'

Hi all,
      l like to upload data from local file.
My question is how to upload data from .xls file using function 'GUI_UPLOAD', and then transfert that data into local internal table.
Bob

hI,
To Upload the excel file FM 'ALSM_EXCEL_TO_INTERNAL_TABLE'
BElow is the sample code.
report ztest.
types: begin of ttab ,
      fld1(30) type c,
      fld2(30) type c,
      fld3(30) type c,
      fld4(30) type c,
      fld5(30) type c,
      end of ttab.
data: itab type table of ttab with header line.
selection-screen skip 1.
parameters: p_file type localfile default
            'C:\test.txt'.
selection-screen skip 1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
       exporting
            static    = 'X'
       changing
            file_name = p_file.
start-of-selection.
clear itab. refresh itab.
perform upload_data.
loop at itab.
    write:/ itab-fld1, itab-fld2, itab-fld3, itab-fld4, itab-fld5.
endloop.
Upload_Data
form upload_data.
data: file type rlgrap-filename.
data: xcel type table of alsmex_tabline with header line.
file = p_file.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = file
            i_begin_col             = '1'
            i_begin_row             = '1'
            i_end_col               = '200'
            i_end_row               = '10000'
       tables
            intern                  = xcel
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
loop at xcel.
    case xcel-col.
      when '0001'.
        itab-fld1 = xcel-value.
      when '0002'.
        itab-fld2 = xcel-value.
      when '0003'.
        itab-fld3 = xcel-value.
      when '0004'.
        itab-fld4 = xcel-value.
      when '0005'.
        itab-fld5 = xcel-value.
    endcase.
    at end of row.
      append itab.
      clear itab.
    endat.
endloop.
endform.
Reward Points if it is Useful.
Thanks,
Manjunath MS

Uploading data using portals

Similar Messages

Maybe you are looking for