Uploading Files Using InputFile Component -- Sometimes not working

Hello,
This is the 2nd time I make a post about it!
Because I have more than 1 application using upload, and everything is correct! But it doesn't work as it should!
You can check the original post here: Uploading Files Using InputFile Component - Sometimes not working
I need a solution please!
The only thing we can conclude is that it could be a bug from oracle !!! (???) But I talked with other people and they say that it works fine for them.
There is one important thing: when we put a form to "Uses Upload = true" it seems that the page doesn't work very normal. For exemple: if you use a table in a form that uses upload the table get's "crazy".
Thanks,
JP

I have now access to METALINK!
I can find some problems and patches about inputFile but not mine! I will check better later!
I think the problem is caused because of my framework!

Similar Messages

HT201317 When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Smart file component(html5smartfile) not working

votefavorite
I have been working on developing a custom extjs console to enable author drop an asset usinghtml5smartfile component. But somehow, the html5smartfile component is not working the way it should. The Area where an author can drop an asset is not displaying. The same is working fine if i am creating a CQ5 dialog. But in my case where i have created a window it's not working.
i have declared my smartfile component like this :-
var assetLinkDropField = { xtype: 'html5smartfile', fieldLabel: 'Asset Link', ddAccept: 'video/.*',ddGroups: 'media', fileReferenceParameter: './linkUrl', name: './linkUrl', allowUpload: false, allowFileNameEditing: false, allowFileReference: true, transferFileName: false };
but this is rendering like this:-
i have tried a lot, after working for 8-10 hours, i found out that the CQ5 dialog updates the view for the component but in case of my window, i have to update it myself. Thus, with a slight manipulation, i just succeeded in displaying the drag area by by tweaking the declaration like this:-
var assetLinkDropField = { xtype: 'html5smartfile', fieldLabel: 'Asset Link', ddAccept: 'video/.*',ddGroups: 'media', fileReferenceParameter: './linkUrl', name: './linkUrl', allowUpload: false, allowFileNameEditing: false, allowFileReference: true, transferFileName: false, listeners: { afterlayout: function () { this.updateView(); } } }
so now the panel looks like:-
but still the Drag and Drop is not working. My Window declaration is like this:-
win = new CQ.Ext.Window({ height : 750, width : 700, layout : 'anchor', // animateTarget : btn.el, closeAction : 'close', // Prevent destruction on Close id : 'manageLinkWindow', title : '<b>Multi Link Widget Dialog</b>', frame : true, draggable : false,modal : false, //Mask entire page constrain : true, buttonAlign : 'center', items : [assetLinkDropField] }); }
Can anyone please look into this issue. I am stuck here for 3 days. Thanks in Advance.

add a slider component to the main (loading) swf's library.

Error while Uploading File using BLOB

Hi All,
I am trying to upload file into Database using simple JHeadstart generated screen for a table with a column having BLOB attribute. Wile inserting, I get this error message.
JBO-25009: Cannot create an object of type:oracle.jbo.domain.BlobDomain with value:oracle.adfinternal.view.faces.webapp.UploadedFiles$FixFilename@1930089
Any help would be appreciated..
Mamun

The problem you're getting is because the af:inputFile component does not support uploading into columns other than OrdDoc, OrdImage, OrdVideo types.
I think you would need to implement the interface oracle.adf.view.faces.webapp.UploadedFileProcessor in a custom class which would
handle the file upload and configure it in the
adf-faces-config.xml file e.g.:
<uploaded-file-processor>packagename.FileUploadProcessor</uploaded-file-processor>
Someone correct me if I'm wrong, as I haven't tried it out myself yet.

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

Upload File using MDS WCF API

I have a field of File Type in my Entity. How can I upload file using WCF API?
I tried to create a new Entity Member and added the following attribute in the member attributes collection
Attribute att = new Attribute();
att.Identifier = new Identifier();
att.Identifier.Name = "Image";
att.Value = bytes;
In attribute value I tried to pass the bytes array of an image, also tried Encoding.ASCII.GetString(bytes); as attribute value, but none of them works.
With byte array i get the following exception "Conversion failed when converting the nvarchar value 'System.Byte[]' to data type int." and in case of ASCII string i get "A database error has occurred. Contact your system administrator." error.
There is lack of documentation and samples.
Please let me know if someone tried it out.
Thanks!

You need to use the EntityMemberAttributesGet operation to retrieve the contents of a file attribute. EntityMembersGet is designed to retrieve a collection of many members and therefore it would not make sense to retrieve every file for every row retrieved.
In contrast, EntityMemberAttributesGet is designed to work with a single member and specific attributes of that member, and it was designed to retrieve the file content.
Val Lovicz
http://www.profisee.com
[email protected]
As the original creators of Microsoft MDS, Profisee's Master Data Maestro provides a range of enterprise-grade functionality to ensure MDS project success.

Attempting to upload files using the zend _file_transfer system from cs5 training from the source. [was: Question for David Powers]

I am attempting to upload files using the zend _file_transfer system from cs5 training from the source.
On trying to upload to a remote server I am having trouble with the destination setting (C:/upload_test) in the example, please could you point me in the right direction for the an example of this setting for a remote file transfer
Also do I have to construct a connection file to activate a Ftp file transfer?
David Woolston

>I am on windows platform
Who is your host? When you checked your host path in your host control panel, what did it say?
>i have assumed (may be incorrectly) that the purpose of the exercise was to upload to a remote site (ie my website)
That is correct.
>Of course that upload might take place on a computer that does not have DW installed (an internet cafe for example)
That's irrelevant. DW is just the tool you are using to build your site. The site runs on your hosting accounts servers. This includes the php scripts you are working with.
>I have uploaded all files necessary for the operation, when i click upload it returns no such directory exits.
Do you have a url we can check? What destination are you specifying in zend code?
>This made me suspect that I would need to construct a ftp file transfer connection file to satisfied username, password , connection address etc
The exercise you are dealing with is using http file transfer. This has nothing to do with FTP. You do not need FTP for this, other than using it to move your source code from your local client to your server.

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

Mark debug 'sometimes' not working

I find mark debug sometimes not working.In my new project ,I add mark debug = true, then set up the debug nets.I can't find them in the assigned nets ,but from the netlists I find some of them.The missing nets are wire type,notregister type.Does the command not work on wire type nets?
Because my project is very large, searching for the nets requires a very long time.So I hope Xilinx can fix this bug.

Rather than open another thread, I'll extend this one since I'm having what I think is the same problem.
I'm using Vivado 2014.4. "Flatten" is set to "None". The nets are set in the elaborated design with MARK_DEBUG and DONT_TOUCH. But when synthesis gets done with them, the names are completely different.
I don't care if the "equivalent" nets are still there. I need the names. Every time synthesis runs, it's a crapshoot whether the names will change. Particularly bad are 500+ bit buses that get exploded into individual signals. I don't have the time to regather them into the proper buses every time.
In general, I've been pleased with the changes in Viviado. But I can't believe how badly a wonderful tool like ChipScope has been screwed up.

Automatic Selected Item of List Builder Component Does not work (anymore)

Hi all,
Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
This are my settings of the list builder component (which was running correctly earlier..):
-at the general tab I defined a range of labels
-at the general tab I defined 2 data column insertion series
-at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
-all of the data comes from an external xml data source
You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
Greetings Erik-Jan Vriens

Hi njnits,
Print view button is a standard component of Xcelsius: look at it in the IDE
Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
All visualisations, not only the table, in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
Hopes this info helps....

Equium L40-156 - Indicator WLAN sometimes not work

Hello peoples - has anyone any idea wha this is bout?
I cant seem to find a similar problem anywhere. The indicator light for the wireless connection will sometimes not work - as a result i have to manually go into network connection and turn on wireless cap. - this will not turn the light on but does allow me to access the internet.
This happens for a few weeks and then it all rights itself for a few weeks,
Then it happens again.

Hi
Do you mean this issue happens sometimes but in most cases you can enable the WLan properly?
First of all to enable the WLan you have to move the WLan antenna switch to ON (be sure that it has been switched properly to the right) and you have I use the FN+F8 key combination.
Usually this enables the WLan.
Im not sure why the WLan antenna switch does not work sometimes maybe its a hardware issue; for example loose connection or the switch was not moved properly who knows
Maybe it would be a good idea to ask an technician for a WLan switch check...

HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

Please don't shout.
Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

Sometime not work = Word Substitution

10.2.0.415
BlackBerry 10 os
please help,
i use thats version at Q5 BB but i get orror at :
Prediction and Correction > Word Substitution >
I cannot use this service, sometimes ok/normal, sometimes not work, its very important to me,
Thats only my reson why i buy Q5 BB please Help,
i have much word to explain to my friend, and with that function will help me, and make my finger easy and very health.
Thank you very much

yoyongsc wrote:
Mine doesn't work in all applications, bbm, text, email, etc.
Verry odd! My Word Sub works well in all of those you've listed.
It does not work in commenting on BBM group pictures and in some BBM Channel comments... works every where else.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT204053 When I try to login to my apple ID on my iphone 4 to use facetime, it will not work and tells me to check my connection? I have even tried creating a new apple ID but the same message appears

When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection. I have even tried creating a new apple ID but the same message appears. I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

Uploading Files Using InputFile Component -- Sometimes not working

Similar Messages

Maybe you are looking for