Uploading newer ios on Ipad 2 - things were going well then got a picture of the apple logo and a line moving from start to end - stopped short of end and can't do anything now - HELP
Uploading newer ios on Ipad 2 - things were going well then got a picture of the apple logo and a line moving from start to end - stopped short of end and can't do anything now - HELP
Try a soft-reset and see if that gets it to boot up properly : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should reappear and it will hopefully boot up.
If it doesn't then try recovery mode and restore/resync your content : If you can't update or restore your iPhone, iPad, or iPod touch
Similar Messages
-
My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I turned off my iPad, but when I went to turn it back on, the apple logo just stays there. It's been there for 10 minutes, and hasn't gone away. Help please.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Cheers, Tom -
before it was stuck on the apple logo so i restarted it like 5 times in less than a minute and now it just WONT do anything.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
During/after upgrading to ios8.1 my ipad air is looping is a screen where i see the apple logo after a minute or so i see a flash of bleu then black en the it starts over again....i can't even turn of. Help?
Hi,
Had the same issue. Hard reset not working.
What I did was: start your mac/pc and open iTunes, hold down the home button of the iPad (and while holding the button), connect it to the PC with the cable.
Keep pressing until you get a pop-up asking to upgrade or restore.
Hope this helps for you!
Xavier -
my ipad mini is keep on crashing. reboot many times. after the apple logo shows up, the screen will turn into black again.
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
it wont go off the apple logo, putting it in recovery and DFU mode dosent change a thing, how can i fix it?
See if you missed anything here
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipad will not boot up. Hard reset just gives the Apple Logo. Help
My ipad will not respond to hard reset
Hello Ridgeway57,
Thanks for using Apple Support Communities.
At this point since the iPad will not boot nor respond to a reset, go ahead and restore your iPad by following the article below.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Take care,
Alex H. -
Forgot my mac system account password, so i can't install anything now, help please =(
so how can i reset the pass?
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up,you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. -
it wont turn on after reset to factory settings
there is a program called recboot. you can download it for free in two parts. one part takes your device out of recovery mode and the other puts it into recovery mode. ive used it before but it doesnt always work and you have to be patient. try it and tell me what happens
-
I have an iPhone 3gs... The only thing that will come up on my screen is the apple logo with the little loading circle thingy... I have plugged it into iTunes and it updated and synced with no problems but still nothing on the screen...
PLEASE HELP!!!!iPhones that use the ARM chips (2g + 3g) are VERY slow to boot. Sometimes in excess of 1 minute 30 seconds (personal experiece). Assuming the device is not JB or has anything wanted on it, such as photos, do a DFU Restore. To cut it short, it basically forces itunes to give it the latest ios (4.something I think). Otherwise, personally I would wait
-
HELP!!!! My iPhone is stuck on the apple logo!!!!
I just got back from apple and they swapped me another iphone and i came home and i plugged it in and wanted to restore everything back to my iphone and now its been vibrating like i just put it to charge, it keeps on vibrating 2 times then 5 sec later it vibrates again and again. Also its stuck on the apple logo and then a spinning thing like it show that its loading appears by the apple logo and it doesnt stop. Then it restarts again. And it keeps on doing it. I took my iphone out of the usb port of my computer because it showed that it was done, like on the top it said nothing like syncing or backing up iphone. It was already finished but it was still on the apple logo and the spinning thing was still there. So i just took it out and it started acting like that. PLEASE HELP ME!!!!!!!! and i restarted it, i held the top and the bottom button. PLEASE HELPP!! Thank you!
If the iPhone is recognized by iTunes, restore it. At the end of the restore process, when you're prompted to by iTunes, do not restore from backup. This will eliminate corrupted/damaged files as the issue.
If the issue persists, it looks like you may need to make a second trip to the Apple store.
Good luck -
Hello, i have a question on my iphone 4s. I went to a party a few days ago and it had gotten stolen. The next day my friend said that he had found it and it was jaibroken? The phone was on 1 % when i had recieved it. It then died and i plugged it in to the charger. When i plugged it in the apple logo appeared as if it was starting but, it wasnt. The apple logo appeared for about ten seconds and then the screen went black. After that, the connect to itunes screen popped up and will not go away. So now when i take it off of the charger the screen just stays black and wont turn on? I tried connecting it to itunes and restoring it. But it wont even show my phone any more on the side of itunes. I tried restoring it and an error had occured (2001). I have looked up on youtube how to fix this problem and non of them have helped or worked. Its my only phone and i cant even text my girlfriend which bothers me terribly!! Please help me ASAP!!
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
I recently did the latest update, and then I charged my Ipad 2 afterwards. I went to use my Ipad 2 days later, and it would not even turn on. Then after a couple minutes, the apple logo appeared as if it were loading. It continued to do this for a few minutes, and then the screen starting turning on and off. Then 5 minutes after that, my lock screen appeard and froze. Then it shut itself off again. I tried plugging my ipad into Itunes to do the recovery restore, but I kept getting error messages.
Unable to Update or Restore
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Firefox consumes almost 100% of one CPU unit regularly every 2 mins for cca 30sec.
Every 2 mins (cca) one core of the CPU gets busy with firefox process. I've tried to uninstall and reinstall whole firefox but without success. I have removed all unnecessary ad-ons I had. Although last one I have added was Firebug (cca one month ago
-
File with control characters in Unicode
Hi All, I have a peculiar problem. I have to prepare 6 files in SAP to be sent to the Mainframe server(legacy system) which sends the FAX to the clients.Now,these files should contain the hexadecimal characters like '1A', along with a lot of normal d
-
We have a BC4J application developed using jdev 3.1/ front end is JSPs. The application is deployed using Oracle iAS 8i. The problem is that when in a jsp, a query is executed that has to return a large number of rows, then the cpu utilization of the
-
How to update Shipping Type(LIKP-VSART) of Delivery order
Hi all, 1st, i created a DO by the BAPI : BAPI_DELIVERYPROCESSING_EXEC, but there is no field of Shipping type, I want to update the Shipping type of delivery Order, one of a field in the header data of DO(VL03N), refrence the DB field LIKP-VSART. ca
-
HI, I would like to know the use of Create Role option in CUP. We have this option Configuration -> Roles -> Create Role. As we know we import roles form either SAP back-end system or ERM. In this case what is the use of Create Role option. Thanks in