Uploading the GL, Vendor and Customer balances

What is the procedure to upload the Opening balances of GLs, Vendor and Customer balances using T Code F-02.

The Ope item balances may be taken adn clean the data.
For AP some clients curt the check and release it later .
If that is the case no need to load AP items,Agian this is depend on the business arrangemnets.
The data may be loaded FB60, FB70 transactions.The transaction may be recorder and use LSMW
Create a GL account ( data conversion acccount)
Customer:
Dr Customer
Cr Data convertion accounmt
Vendor:
Dr Convertion Account
Cr Vendor
The data collected in Xl may be converted as Tab delimited Txt file and may be used for LSMW.
Hope this is clear. Allot the points if you get some resolution for yr doubt.
Chitras

Similar Messages

Gl, vendor and customer balances in program

I need to upload GL, Vendor and customer balances in single program(bapi or normal recording also.). If any body is having code for this and any thread is available please help me .. urgent...
Thanks inadvance
praveen

The Ope item balances may be taken adn clean the data.
For AP some clients curt the check and release it later .
If that is the case no need to load AP items,Agian this is depend on the business arrangemnets.
The data may be loaded FB60, FB70 transactions.The transaction may be recorder and use LSMW
Create a GL account ( data conversion acccount)
Customer:
Dr Customer
Cr Data convertion accounmt
Vendor:
Dr Convertion Account
Cr Vendor
The data collected in Xl may be converted as Tab delimited Txt file and may be used for LSMW.
Hope this is clear. Allot the points if you get some resolution for yr doubt.
Chitras

Carrying Vendors and Customer balances

Hi Frnds,
Can anyone tell me the procedure to carry forward vendors and customers balances to the next period ?

The t code if F.07
Regards
Sanil Bhandari

Open item of vendor and customer balances entries

Hi,
i want yo upload all the open items of the vendors and customers what will be the accounting entries generated while uploading the balances of the open items?
regards,
ranjeet.
Moderator: Please, note that on new violation of the rules of this forum, your user will be banned

hi ranjeet,
first of all use t code fb60 and fb70 for vendor and customers respectively, if you are using the tool LSMW, then
in case of vendor open invoices
Vendor offsetting account Dr. .......
             vendor accountn cr.
for down payments
vendor account Dr..
         Vendor offsetting account Cr
In case of customers open invoices
customer offsetting account Cr...
           Customer Account       Dr.
for customer downpayment
    Customer account Cr.
             customer offsetting account Dr.

How to setting in the onetime vendor and customer in AP/AR

Hi
how to create onetime vendor /customer in AP/AR .which t code can be used in posting and where the vendor master level data filling and address and vendor name
yps

Mr Balaji,
I am very much aware of It that F-53 will post against existing open item,
My question is if a one time vendor say XYZ has submitted bill for Vehicle Hire Charges then
what T-code i shall use to make entry.
Please not that this is one time vendor.
Regards,
Alok Parida

Profit Center population in the Vendor and Customer Line items

hello
our client is asking for getting profit center in the vendor and customer line items where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
but our business is not satisfied with the report and expecting report at profit center level.
Can any one suggest any way of doing this.
regards,
Vijay

Dear Vijay,
Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
4. This will help you to do the vendor line item wise selection in the FBL1N, FBL5N profit center wise.
Constraints of this solution:
The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
Regards,
Bharathi.

Difference in the Balance between FS10N and Customer Balances in Local Curr

Hi,
When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
What could be the possible reasons for the differences..
Thanks

Hi Varshani,
Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
SAPF070 - Compare Documents and Account Transaction Figures
Description
This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
Output
The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
Description
If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
Requirements
All of the following listed requirements must be fulfilled:
1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
It is advisable to execute a test run first, which will list any differences that are found.
Further notes - Authorizations
Repair program authorization group (F_005)
Company code authorization (F_BKPF_BUK)
Thanks
Venkata Ganesh Perumalla
Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM

Tcode for Vendor and Customer Trial balance

Hi,
I want to generate Vendor trial balance & customer trial balance. I want name of each vendor and customer with the normal and special GL balance written against it
Ex:
Vendor A     -    Rs.100-
Vendor B     -    Rs. 2300-
Vendor C     -    Rs. 1000
Total -- XXXXX -
> This should match with my Vendor Reco account total.

If standard report does not suffice your requirement, then create your own.
FOR vendor USE K in transaction code instead of D.
Hello,
The following example I have given is for customers.
The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
For Customer you go to FDI4, for vendor you go to FKI4 for forms.
Remaining all are the same.
Hello,
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
Regards,
Ravi

BDC to upload the Emp Vendor Balance

HI All,
I am stuck in a situation where in i need to upload the Emp Vendor Balance from One Emp Vendor to Other.
Like there is a Emp Vendor E001 Now the Same Emp Vendor will be 4010001
How do i bring the Balances to the Emp Vendor .
Is there any standard report for that.
Please help.
with rgds
Ranjith Singh

Hi Ranjith Singh ,
What is the T-code you are trying to Upload.
Regards,
Suneel G

Printing confirmation of balance for vendors and customer-urgent

Hi,
Thanx Vamsi for the reply.
I have got 1 more doubt.we are using CUSTOMISED correspondence types.The annexure we give has only the open items.But the users want a list of cleared items to appear in the list.
Will the confirmation have only open items ???? or can it take even the cleared items along with it.Can the print program be modified to take even the cleared items along with it.
Kindly advise.
Thanks in advance
Regards
Karpagam

Hi,
We are using print program SAPF130K and SAPF130D for vendor and customer respectively.
My query is can we bring even the cleared items alongwith the open items in the same print program???
Now we have line items of open line items only?? As per our exploration into the program... we get only open items..
Also we are using SAP10 and SAP11 as the correspondence type.Kindly advise as to correspondence type should be changed so that it can print both the open and cleared items?
Please reply ASAP as it is very urgent.
Thanks in advance.
Regards
Karpagam

What is the importance of the tabs like vendor and customer in t.code md04

Hi All,
what is the importance of the tabs like vendor and customer in t.code md04? Could you please explain me...
Thanks
Krish

Hi Krish,
In MD04,you see requirement of material.
Whenever there is Purchase order & Sales order created,you will find relevent Vendor & Customer name respectively when you go for Vendor & Customer tab. When you double click on Vendor It shows you details of Vendor.
Just try & Check it.
Hope this help you.
Regards,
Raja.
Edited by: Raja on May 7, 2009 6:13 AM

How can i clear the vendor and customer open line items at a time same vendor as a customer of the company (same vendor same customer and equal invoices )

my vendor and customer are same . purchase invoice due100000 and sales invoice amount is also 100000 at a time with any manual action , have any setting for cleared both vendor and customer line items at a time ...........

X Ltd. will be Vendor & Customer.
Purchase Invoice is booked under Vendor SAP number & Sales Invoice is booked under Customer SAP number. Then you can transfer amount from Vendor to Customer or vice versa with T-code F-04.
Then if you have transferred amount from customer to Vendor (F-04), Vendor account will have two entries Debit & Credit. Then go for clearance with T-code F-44 clear Vendor.

Profit centre needs to be updated in Vendor and Customer line item reports

We are using ECC 6.
Profit centre is updating for vendor and customer line items in document level. But the same is to be reflected/updated in profit centre field in FBL1N and Reports.

hi
Use this T codes you will get Profit center wise S_AC0_52000888 Paybles (vendor balances )
Tcode for Profit center wise receviables S_AC0_52000887 (customer balances )
Regards
Babu.k

Vendor and customer ageing analysis

Hi Gurus
i am in a project and my client wants vendors and customer age vise analysis to be shown in balance sheet that's less than six months and more than six months kindly help me for doing the same
Thanks
venkat

hi,
you can use SAP standard report. S_ALR_87012178 - Customer Open Item Analysis by Balance of Overdue Items. This gives an wide option by the customer where in you can choose the aging period by the day i.e. 10, 15, 20, 60, 90 days etc based on your requirement.
when you perform your data migration make sure that the baseline date and payment terms are correct so the aging will be correct for the line items you load. You dont need to bring over cleared line items, as they wont affect the aging, all they will provide is payment behaviour.
Some data migration projects assign a due immediately payment term and have the due date in the baseline date.
Regards,
Greeshma

Profit centerwise Vendor and Customer line items view

Deal ALL,
We have not activated Business Area.
We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
Request you all to reply.
Thanks & Regards,
Bhadresh

Hi
Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
Assign Points if useful
Regards
Sanil

Uploading the GL, Vendor and Customer balances

Similar Messages

Maybe you are looking for