Upon "export media", CS4 tries and fails to load import/export apps
Now that I've reinstalled CS4 PPro over the trial version-turned-purchased-version of Premiere Pro (that dumb, known Adobe defect where CODECs other than DV are missing on the web purchased version), everything is working well except - when I go to export a sequence to Media Encoder, it says that it must reinstall first the exporter app, it fails on that, then it tries to reinstall the importer app and fails at that too, at which time it opens Media Encoder and seems to perform fine.
Why those obnoxious and very time consuming attempts to reinstall the importer/exporter apps? Any solution?
Thanks!
Jim
Yes, but you will not like it.
Uninstall everuthing Adobe, run the Cleanscript 2 or 3 times, then reinstall. Your problem is caused by not uninstalling the trial completely before installing the full version.
Similar Messages
-
I have tried and failed to copy my iTunes library and playlists from my Windows 8 desktop to my Windows 7 laptop using an external hard drive. Can it be done? Help would be appreciated. I have followed instructions found online but the library of music doesn't pull in. Thanks!
NateMigrate an iTunes library from one computer to another
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entireiTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one, with ratings, play counts, playlists etc. preserved. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd normally recommend method 1 since it establishes an ongoing backup for your library and unlike copying with Windows Explorer the process can be resumed if it is interrupted and it will continue to the next item if there are any read/access errors.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See Make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2 -
How can I add a Epson Stylus SX445w to my Mac Book Pro
This is the second one I've tried and failing miserably...it should be so simple...I've installed poken to the help line at Epson and they say it's down to Apple !! Somebody please help meYes I did everything that I was instructed to do!
Cheers
Joyce -
IMac G3 chimes two to four times upon boot and fails to load.
Hello, all.
Today, I moved my aunt from my old iMac G3 to my less old iMac G4. The iMac G3 was working great still at her house, so I decided to take it home with me to replace the iMac G4. I didn't really plan on using it to any extent, but thought it would be cool to have still working.
So I pop it in the car on the passenger seat, drive the mile back home, and unload it onto my desk. I plug power, ethernet, keyboard/mouse and a USB extension cable in, and attempt to boot. When I hit the power button, the iMac makes an attempt to chime, but it kinda does two loud chimes, a faint third chime, and a fourth loud chime. After that, it just sits there with the power button light on and nothing happens.
Now I'm gonna admit it. This was done on an extension cord coming off of a three-way splitter coming off a power strip. Not the safest or most practical way to do this, but I figured that since it worked with my old eMac G4 that had a 17" CRT, it would work with my iMac G3 with a 15" CRT.
So I moved the power directly to the wall. This time, I plugged in only the power and nothing else. I press the power button, and it still does the weird chime and fails to load.
So does anyone have any clues as to what to try? Before you tell me to bust this thing open, I'm gonna say this: I am deathly afraid of CRT monitors, and generally stay as far away as humanly possible from them. The iMac has had a history of few problems, but one of those was a loud, high pitched noise coming from the screen when it was in my aunt's basement. This was probably due to being to cold, or humidity, but switching screen resolutions seemed to fix it. I could switch back and it went along fine. I know it's the screen that was making the sound because my eMac had done the same thing just a week prior, even though it was in an environmentally-sound room, along with some other computers.
Anyway, she has since moved the iMac G3 up to the main part of the house that stays at a fairly steady 75F or so year round and doesn't get too humid. It's worked great, and we were gonna move her up to the G4 for speed benefits and so that she could video chat in Skype. When I last powered down the iMac G3, it was running absolutely fine. I got all the important data off it (thank God) and transferred to the iMac G4. I gently, without bumping it on anything, took it out to the car, gently set it on the foam-cushioned seat, and gently drove it home. When I got it home, I gently took it out, gently took it to the desk, and gently set it down. After a while, I put it screen-down on my lap to read the stuff on the bottom. I undid the RAM cover, popped out a stick, and put it back in. I haven't really gone back to check, but I'm about 90% sure that I got it in perfectly fine. After I looked at it, I gently set it back on the table and did the whole boot process that I explained earlier.
So what in the world could be causing this? Did I really bump it on something, or could it be a weather problem, or could it be that it decided to just stop working at the most perfect time?
Specs are as follows:
iMac G3 600 mHz Graphite
Mac OS X Tiger 10.4.11 or whatever the last update was
1GB RAM
40GB HD
ATi Rage 128 or whatever it is that's in these things
Combo drive
No Airport card
No internal mods
Never been opened since I purchased it in late 2006.
Also, I think this would be the best place to note that there are little red pieces of what appears to be hard plastic. It looks to be about as thick as the casing that goes around the back. I remember it being in the speaker grill when I first got it, but after moving around, it has moved mostly to the bottom, just under the CD-RW/DVD drive. You can clearly see it through the translucent plastics of the iMac's casing. Not sure what the heck it is, how it got there, or if it has any significant importance to the problem at hand, but I figured it would be worth a shot by shouting that out.
OH, one more thing. I noticed, on the last successful boot at my aunt's house, that the sound would not work. I tried moving the slider up to change the volume, and nothing worked. It wouldn't turn the sound on. Very mysterious. Other than that though, it hasn't had any issues that I've seen.
Sorry for the huge post, but I just want to know if it's my stupidity stopping it from booting or if it really did just decide to end its usable life at the precise moment it wasn't absolutely needed anymore. I will check the RAM and post back if that fixes anything, so if there isn't a reply from me saying that I checked RAM and it fixed it, then it's still being a problem and the RAM wasn't the problem.
And if it really did just decide to stop working, does anyone know of anyone that puts Mac Mini's inside iMac G3 cases? It would be pretty freaking awesome if I could take my Mac Mini, put it in there, and possibly get rid of the CRT and replace it with an LCD panel. I've heard that it's been done before, but again, I'm deathly afraid of the stupid things that are CRT screens. Long story short, one imploded about three yards away from me and it scared the living **** out of me. I really wish all CRTs would just STOP working RIGHT NOW so that everyone had to move to LCD screens. It would make my life so much easier. Hey, why not start with my iMac? All right everyone, if you own a CRT monitor or a computer with a CRT monitor built in, make sure it isn't working by Tuesday, okay? *Shudders in fear of an imploding CRT...*Since you removed/re-installed one of the memory DIMMs from the computer, that's the most likely culprit (as the computer worked perfectly earlier). Remove it again and re-install, making sure that it's fully-seated in the slot and that the locking levers snap closed at each end. Try booting the iMac again. If unsuccessful, immediately insert your Tiger installer DVD when you power ON and hold down the C key. If it boots to the Tiger disk, run Disk Utility to scan and repair the hard drive.
-
C150 The case application tried and failed 3 times...
Hi All,
Requesting some help with the IronPort C150 Alert below. Thanks for any suggestions, pointers, or experience you can provide regarding this issue.
The Warning message is:
The case application tried and failed 3 times to successfully complete an update. This may be due to a network configuration issue or temporary outage.
Version: 7.5.1-102
Thank you,
--LikoHi again,
Luckily I found this post which was not located using the search utility.
'CASE updates incorrectly timeout on 1U appliances'
--Liko -
I recently turned my iPhone in to a Genius bar and had it repaired under the iPhone 5 Sleep/Wake Button Replacement Program. Congruent to that repair, I had to do a factory reset (contetn and settings). Once I got it back, I restored from iCloud backup. When I re-opened the podcats app, it began to redownload all old episodes I had on the iPhone before.
Of these many podcasts, 5 episodes were from 2 defunct podcasts no longer on the iTunes store. It gets download errors on these episodes. I can get it to stop retrying (and failing). I have tried canceling the downloads. I have tried deleting the episodes (and the podcasts). I have tried deleting them then canceling the downloads. I have tried marking them as played and canceling the downloads. I cannot get them to be purged from the catalog and not try to redownload.
Outside of someone with access to the iCloud backend who can remove the associations, I don't know if anyone here can help me. But I am open to suggestions.
Thanks.
(also perhaps of relevance, the period between the wipe and restore included the release of the 2.0 app )Hello DonaldGuy,
It sounds like you have some podcast subscriptions that are constantly trying to download but they are not in the iTunes Store anymore prompting an error message. You can use the edit button in the susbcriptions list to delete the subscribed podcasts in question, to prevent the error messages from happening:
Podcasts at a glance
http://help.apple.com/iphone/7/#/iphbaeb5b5cb
Then I would backup to iCloud to update the most current iCloud backup to reflect this:
Back up to iCloud
If you're using iCloud, it can automatically back up your data if you've chosen this option. You can verify your iCloud backup and make sure that it's up to date by following these steps:
Tap Settings > iCloud > Storage & Backup.
Turn on iCloud Backup if it's off.
Tap Back Up Now.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Thank you for using Apple Support Communities.
Cheers,
Sterling -
After adding 2nd WiSM and failing over AP's some apps don't work
We have a dual core made up of 2 6513's. In 6513#1 we have WiSM#1 which we have had for sometime now. We have added a 2nd WiSM in 6513#2 for redundancy purposes also we are going to be re-configuring the WiSM in 6513#1 to more match that of the new WiSM in 6513#2. We have installed the new WiSM and failed over the AP's from 6513#1 so we can re-configure it's WiSM. The failover went great and no issues, with the exception that a web application or two didn't function from wireless clients and users were having issues getting to some mapped drives. The only difference from the new WiSM config vs the old WiSM is that on the old WiSM the AP's were in the same VLAN as the controller management interfaces. Now with the new WiSM it's configuration has the controllers AP mgt interfaces ip addresses in a different VLAN from the AP's, we are doing this based on Cisco best practices. If we revert the AP's back to the original WiSM/controllers the PC's where they are on the same vlan/subnet the applications and shares that were having issues the other way work. We have placed a call with Cisco TAC and they say our configs look good and we even sent them some packet captures and they said everything looks normal. The wireless clients can ping and resolve the server hosting the application database just fine.
ThanksWe did create the mobility groups, and we are using DHCP opt 43. The AP's find the 2nd WiSM#2 just fine and associate to the controllers and all the WLAN's work just fine. The only issue is that after the AP's are on the new WiSM and controllers there is an application or 2 that is having trouble locating it's database server and that some share's are not working. Again the only difference in this new setup in that now the AP's are on a different subnet/vlan from the controller mgt addresses where as before they were in the same subnet/vlan and the application and shares worked fine. It's almost like it is a bit of a routing issue?
Thanks -
My 2nd generation iPad woke this morning and decided to load all of my apps 800+ and I don't seem able tp prevent it. It is set to manually manage apps and I have reset, restored and the minute I reconnect with wifi it starts loading. Any suggestions out there on how to correct this?
@chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
...the other folders did copy okay though!
It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
@ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
@alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
Thanks for the help!
(pre-post) UPDATE >>> I've just mounted my Windows partition in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer -
Daughter's CS failing to load/import textures ...
... from another drive after a reinstall of Win2K SP4. All textures are in photoshop format and have been loading without error until the reinstall. Otherwise CS performs without a hitch. Delete an .ini file perhaps?
Hello,
The error is indicating something wrong with the file name or location, not the content. Try verifying that the file name passed to createLocalFileInputStream() is in good shape and refers to a regular file with permission to read. If that looks OK, there's a small chance you need to explicitly delete the XmlInputStream between calls. That should not be necessary, because the putDocument() call should consume it, but it does not hurt.
Regards,
George -
Trying (and failing) to read XML multi-dimensional data array
i.e.
<mpp:Vehicle>
<mpp:Vehicle_Rgtrn_Ref>?</mpp:Vehicle_Rgtrn_Ref>
<mpp:Vehicle_Model_Code>?</mpp:Vehicle_Model_Code>
<mpp:DrivingRestrictionCode>?</mpp:DrivingRestrictionCode>
<mpp:Object_Mnfct_Year>?</mpp:Object_Mnfct_Year>
<mpp:Building_Number_const>1</mpp:Building_Number_const>
<mpp:Building_Name>The Slums</mpp:Building_Name>
<mpp:Sub_Building_Name>Flat 1</mpp:Sub_Building_Name>
<mpp:Postcode_Area_Ref>???? ???</mpp:Postcode_Area_Ref>
<mpp:Covers>
<mpp:Cover>?</mpp:Cover>
<mpp:Cover>?</mpp:Cover>
<mpp:Cover>?</mpp:Cover>
</mpp:Covers>
</mpp:Vehicle>
<mpp:Vehicle>........
I'm currently trying to create a web service to read a SOAP message containing such XML. When reading the message, EDQ converts the singleton nodes in each Vehicle node group to a stringarray but only provides the last Cover node in each Vehicle in a stringarray. I'm not in control of the XML structure so trying to get the supplier to concatenate each vehicles covers into a delimited list within a single node may be a battle.
Anybody else ever encountered this? Is it possible or am I flogging a dead horse trying to achieve this.
Thanks in advance.
JonHi Richard,
Thank you for your suggestion to my colleague Jon regarding -multi in option. As he said, w
hat we currently get when we have a SOAP message containing <Covers><Cover>A</Cover><Cover>B</Cover><Cover>C</Cover></Covers> is an EDQ stringarray containing the value {C}.
I've tried your suggestion
and ran the wsdlizer with the -multi in option but the wsdlizer fails with the following error:
H:\Workspaces\svn\edqTrunk\EDQ\WebServices\WSDL>java -jar wsdlizer.jar -o lv-mpp-query-request-ws.jar -multi in MPP_Query_Request_Service.wsdl
INFO: 10-Sep-2013 13:24:07: wsimport succeeded
Problem encountered during annotation processing;
see stacktrace below for more information.
com.datanomic.director.webservices.apt.ScannerException: multi-record request element must contain single nested list
com.datanomic.director.webservices.apt.Scanner$Processor$Servicer.makeDef(Scanner.java:747)
etc.
SEVERE: 10-Sep-2013 13:24:07: APT scan failed
Unfortunately, the error message is not very helpful to me. Do you know what it is whingeing about? I've also tried running the wsdlizer on our old wsdl files, i.e. before we introduced the parent tag <Covers> around <Cover>, but this failed with the same result when running with the -multi in option
The wsdl file, with most of the XML tags removed for clarity and brevity, looks like this:
<wsdl:definitions xmlns:schema="http://xxxx/MppService" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://xxxx/MppService" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" name="LV" targetNamespace="http://xxxx/MppService">
<wsdl:types>
<xsd:schema xmlns="http://xxxx/MppService" xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xxxx/MppService">
<xsd:element name="request">
<xsd:complexType>
<xsd:sequence>
<xsd:element minOccurs="1" name="CorrelationUID" type="xsd:string"/>
<xsd:element minOccurs="1" name="RequestorName" type="xsd:string"/>
<xsd:element minOccurs="1" name="Brands" type="brandType"/>
<xsd:element minOccurs="1" name="Parties" type="partiesType"/>
<xsd:element minOccurs="1" name="InsuredObjects" type="insuredObjectsType"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="response">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="CorrelationUID" type="xsd:string"/>
<xsd:element name="MPPResponseUID" type="xsd:string"/>
<xsd:element maxOccurs="unbounded" minOccurs="1" name="Brand" type="schema:brandsType"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="brandsType">
<xsd:sequence>
<xsd:element name="BrandCode" type="xsd:string"/>
<xsd:element name="ResponseMPD">
<xsd:complexType>
<xsd:sequence>
<xsd:element minOccurs="0" name="FunctionAvailable" type="xsd:string"/>
<xsd:element minOccurs="0" name="MessageCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ResponseCI">
<xsd:complexType>
<xsd:sequence>
<xsd:element minOccurs="0" name="FunctionAvailable" type="xsd:string"/>
<xsd:element minOccurs="0" name="MessageCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="brandType">
<xsd:sequence>
<xsd:element maxOccurs="2" minOccurs="1" name="BrandCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="partiesType">
<xsd:sequence>
<xsd:element maxOccurs="unbounded" minOccurs="1" name="Party" type="schema:partyType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="partyType">
<xsd:sequence>
<xsd:element minOccurs="0" name="PartyUID" type="xsd:string"/>
<xsd:element minOccurs="1" name="RoleCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="insuredObjectsType">
<xsd:sequence>
<xsd:element maxOccurs="1" minOccurs="0" name="Properties" type="schema:propertiesType"/>
<xsd:element maxOccurs="1" minOccurs="0" name="Vehicles" type="schema:vehiclesType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="propertiesType">
<xsd:sequence>
<xsd:element maxOccurs="unbounded" minOccurs="0" name="Property" type="schema:propertyType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="vehiclesType">
<xsd:sequence>
<xsd:element maxOccurs="unbounded" minOccurs="0" name="Vehicle" type="schema:vehicleType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="propertyType">
<xsd:sequence>
<xsd:element minOccurs="0" name="BuildingNumber" type="xsd:string"/>
<xsd:element minOccurs="0" name="BuildingName" type="xsd:string"/>
<xsd:element maxOccurs="1" minOccurs="0" name="Covers" type="schema:coversType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="coversType">
<xsd:sequence>
<xsd:element minOccurs="1" name="Cover" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="vehicleType">
<xsd:sequence>
<xsd:element minOccurs="0" name="VehicleRegistrationMark" type="xsd:string"/>
<xsd:element minOccurs="1" name="ABIBrokernetCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
<wsdl:message name="request">
<wsdl:part name="parameters" element="schema:request"/>
</wsdl:message>
<wsdl:message name="response">
<wsdl:part name="parameters" element="schema:response"/>
</wsdl:message>
<wsdl:portType name="LVEI">
<wsdl:documentation>Operations</wsdl:documentation>
<wsdl:operation name="process">
<wsdl:documentation>Process a query request</wsdl:documentation>
<wsdl:input message="schema:request"/>
<wsdl:output message="schema:response"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="LVBinding" type="tns:LVEI">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="process">
<soap:operation soapAction="http://xxxx/MppService"/>
<wsdl:input>
<soap:body use="encoded"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="LV-MPPQRS-v01">
<wsdl:port name="LVEndpoint" binding="tns:LVBinding">
<soap:address location="https://xxxx/LV-MPPQRS-v01"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
A colleague created the wsdl, it's been checked a number of times but no one can find anything dodgy that might account for the wsdlizer error we're getting. So we're a bit lost now, the data coming in to our EDQ process is incomplete, which makes further development of out EDQ processes somewhat challenging.
Any help would be greatly received. Also happy to send any more information you may require.
Jules -
Trying (and failing) to install Adobe AIR
checking for pow in -lm... yes
checking for zlibVersion in -lz... no
configure: error: zlib not installed
Aborting...
error: Build failed
I'm using Arch64, so my zlib is x86_64, but I do have the lib32-zlib from [multilib]. Do I need a bin32-zlib?
I'm trying to install bin32-adobe-air from AUR, by the way. It requires lib32-libpng12.
EDIT: A recent update has solved this problem. But now the extraction of AdobeAIRSDK.tbz2 keeps failing.
http://pastebin.ca/1985755
Last edited by YAOMTC (2010-11-09 03:53:59)If you are in the USA and other places with iCloud you can redownload then by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can always redownload apps at no additional cost as long as you are signed into the same iTunes account that originally purchased them. -
Please help a desparate man, smile. A computer tech, , put ubuntu on my computer and installed firefox several years ago. Now when I try to update it to the new version, it wont update. I do see a note on the firefox instructions that if linus was placed on my computer with a distribution package, I think it said, whatever a distribution package is, I have to wait for an updated version, I think it said. I dont know if the tech who installed it used a distrution package and he is gone elsewhere and I cant ask him. I am a computer imbecile so thats all I know, and I cant get to many sites now because they only take updated firefox, PS I dont see any word help to click, where is this word located if I ever need to use it? Also lately after I tried to update firefox, not before, when I try to download anything to view that thing that starts with a p, three letters, like a medical article, it wont take me there, I merely get a box saying I am trying to dowload it, maybe that is linked to me not having an updated version of firefox. Please remember in your answer, I know almost nothing about computers. Thanks a lot. .
Steve LordUbuntu/9.04 (jaunty) is an old version of Linux from 2009. You're gonna need to upgrade to a newer operating system to use a more recent version of Firefox.
My advice is to consult with the Ubuntu support forums to find out if your PC can support the latest version of Ubuntu, or if you should switch to a different "flavor" of Linux.
http://ubuntuforums.org/ -
Trying (and failing) to delete photos in iPhoto '09
I am trying to delete some photos in iPhoto. I have used the option to move the photos to trash (the trash in iPhoto) - then used the option to empty the iPhoto trash. The pictures are successfully removed from the library and the trash box. However, when I have done this iPhoto will not let me quit and if I force quit, the next time iPhoto is launched the deleted photos are still there.
Any suggestions please?backup and rebuild your library - depress the option and command keys and rebuild from the last automatic database backup- if that does not do it use the remaining options - if that does not do it use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -
LN -
Error 1607 Help...have tried and failed
I'm trying to install iTunes 6.0 and the "Error -1607: Unable to Install InstallShield Scripting Run Time" message comes up every time. So I went to the guide that b noir suggested and attempted the first solution on "http://consumer.installshield.com/kb.asp?id=Q108158". (the isscript thing) so I went through the steps and looked at the file version of the installation file and found it to be 6..... and nothing was said about anything beginning with 6. I ran through everything else on the page just for kicks but none of it worked. so I'm guessing that could be the problem and I was hoping someone could help me out. otherwise I have no idea what's wrong with this thing.
hi Garrick!
"http://consumer.installshield.com/kb.asp?id=Q108158". (the isscript thing) so I went through the steps and looked at the file version of the installation file and found it to be 6.....
just checking. were you right-clicking on the
b itunessetup.exe
file itself?
there's actually a much better version of that particular document here (must remember to warn people about this in future):
http://consumer.installshield.com/kb.asp?id=Q108322
step 1 d should guide you through the version-checking procedure that works for itunes installs.
many thanks for the heads up! keep us posted.
love, b -
Tries and fails to update at each browser start. How do I turn off auto update attempt?
Slows Firefox loading and update attempt always fails.
I just want to turn off the auto-update feature. How??davefromtemple wrote:
Thomas... another bad answer. When you say...
Your Mac will never force you to update. WRONG.
When I updated to the latest software updates... I was asked if I would like automatic updates.
Unfortunately, I pressed Yes.
Now, I'm in the middle of working on something and my display goes bright white... then I get a message that says "Installing Software Update"... then the display goes bright white... the computer turns off and I need to sign on again.
AND I can't find a way to turn off automatic software updates!
You are posting in the wrong forum, please try to keep up.
Maybe you are looking for
-
Hi i am using the variable substitution method in file adapter for dynamic filenam.e But the adapter is throwing error saying "Message processing failed: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceExceptio
-
"Convert file from:" error box
Every time I click on a PDF file to download, the downloads window comes up and shows the download progress, and when the download finishes, a box appears that says "Convert File". In the box it says: Convert file from: then it lists various file typ
-
Renaming Multiple Apple TVs in Home Sharing?
Hopefully this is simple, but I can't find an answer online... I have a straightforward Home Sharing scenario which includes one iTunes library on my iMac, a Gen2 Apple TV in one room, and an older Apple TV in another room. All share as expected with
-
MSI 945GCM7-F RAID Function missing in BIOS
Hi every1, i just got my MSI 945GCM7-F last week, was trying to enable the RAID function in BIOS to use the Intel Matrix Storage Manager but the RAID function is missing in the BIOS. According to the manual, to enable RAID in BIOS should be under Int
-
In our current portal configuration we have the portal server running on one machine and the gateway on another. We want to move the gateway onto the same system as the portal server. So the easist way to do this seems to be to add a new gateway. Her