Urgent--custom servlet not working with https/gateway of the portal server

We have created the custom servlet to add some more authentication to the login screen. I have explained detaildely below.
We have set if password reset change password screen should come by using identity server.
First screen comes which asks �user id� and �password�.
after this next screen comes with �old password�, �New Password� and �Confirm Password� (as we have forcefully asked user to change password after reset by using identity server ).
On this page we have added two new filed �Date of Birth� and �Date of Joining�.
And we are forcefully transferring request to our Custom Servlet which will validate the �Date of Birth� and �Date of Joining� from the database and submit the same a form as required by Login Servlet to validate the default parameters �old Password�, �New Password� and �Confirm Password� (which is the default validation without adding custom Servlet).
This whole process is working with �http� protocol and giving �unable to connect� host with �https� protocol.
Without custom Servlet process is like this, which is working
Login (usrid, password) � Login (Old Password, New Password, Confirm Password) � Portal home Page
With custom Servlet , Which is not working with �https� Protocol. we are getting the message "Authentication Failed" screen.
Login (usrid, password) --> Login (Old Password, New Password, Confirm Password , Date of Birth, Date of Joinig) --> Custom Servlet validate Date of Birth, Date of Joining --> Login (Old password, new Password, Confirm Password) --> Protal Home Page
This one works with http, whereas this one gives the "Authentication Failed" screen with the https.
Please let me know if anybody have implemented this and help me to resolve the issue.
Best Regards
Ramkumar

Hi,
I am also getting this error message in the sun ONE webserver error log file....
[20/Nov/2004:13:42:39] failure ( 6162): for host 172.16.5.21 trying to GET /amserver/UI/Login, service-j2ee reports:
StandardWrapperValve[LoginServlet]: WEB2792: Servlet.service() for servlet LoginServlet threw exception
com.iplanet.jato.CompleteRequestException
at com.sun.identity.authentication.UI.AuthenticationServletBase.onUncaughtException(AuthenticationServletBase
.java:141)
at com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:787)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
Regards
Ramkumar R

Similar Messages

UWL Issue not working with HTTPS

Hi,
The UWL is implemented and are in live for long long time in our company. Recently, we changed the Portal to be accessible via HTTPS as well and after chaging realized, none of the UWL worklist links are working. Worklist Items are Displayed with hyperlink. But when clicked on it, nothing happenes and no javascript error thrown as well.
Is there are Dependencies for UWL with HTTP Protocoal. And if not, can you please suggest on how to make it work with HTTPs protocol.
Thanks.

Thanks (again!)
Before making any changes, I am assuming you are referring to the protocol of the ERP system in the System Landscape? I don't actually see that parameter name (Protocol of target system) in the list of values. I do see a few other protocol options (CVIEWS, FSCM, DRS, though).
I have not changed any of these values as part of trying to support SSL for the portal via terminating it on a load balancer (but keeping HTTP on the backend portal/erp systems) - I was assuming that these settings were related to the portal itself establishing connections to ERP, but if they are somehow used with URL generation to the browser.......my confusion! It seems there are a number of values that could be changed (I've often wondered why there are multiple places where the hostname shows up for one R3 system connection!)
Application Host
ITS hostname
ITS Protocol
Web AS Host Name
Web AS Protocol
My theory would be to change all of the hosts to be external FQDN on the load balancer and the protocol to HTTPS. Again, I have not configured the Portal OR the ERP system to support HTTPS.
I've also observed the logoff link comes back as HTTP, so maybe that is the DSM trying to hit the backend system via HTTP due to this as well
Thanks a million for your time.

Standby PRI not working with voice Gateway Router & CUCM

Hi ALL ,
GOOD Day all of you .
I am facing a big problem i.e standby PRI not working with VG & CUCM , I have checked all the configuration parameter on VG & CUCM found ok but I am unable to make any call from standby link also incoming not come on the standby link . When I make a call on my Pilot no but getting busy tone .
I observer the some errors on VG like Cause i = 0x8286 - Channel unacceptable on my second PRI channel .
Please help me to reslove this proem .
Following are the PRI configuration Parameter on CUCM .
Product Specific Configuration Layout
Line Coding : HDB3
Framing : NON CRC4
Clock : External
Input Gain (-6..14 db) 0
Output Attenuation (-6..14 db) 0
Echo Cancellation Enable
Echo Cancellation Coverage (ms) 64
PRI configuration on VG
interface Serial0/0/1:15
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
BR,
SANDIPAN

Hi Craig ,
Thanks for your reply .
We are using the full 30 channel E1 PRI .
following are PRI Channel Statistics:
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output may not apply
ISDN Se0/0/0:15, Channel [1-31]
Configured Isdn Interface (dsl) 1
   Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
   Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Please find following debug error
VG_RO_01#isdn test call interface serial 0/0/0:15 09665484798
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User RX <- RRp sapi=0 tei=0 nr=5
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User TX -> RRp sapi=0 tei=0 nr=4
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User TX -> RRf sapi=0 tei=0 nr=4
Mar 7 03:00:54.574: ISDN Se0/0/0:15 Q921: User RX <- RRf sapi=0 tei=0 nr=5
CCIL_PUNE_DR_VG_RO_01#
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Called num 09665484798
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=5 nr=4
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0084
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Called Party Number i = 0x81, '09665484798'
Plan:ISDN, Type:Unknown
Mar 7 03:00:56.006: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=6
Mar 7 03:00:56.018: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=4 nr=6
Mar 7 03:00:56.018: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x8084
Cause i = 0x8286 - Channel unacceptable
Mar 7 03:00:56.022: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=5
Mar 7 03:00:59.995: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=6 nr=5
Mar 7 03:00:59.995: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0084
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Called Party Number i = 0x81, '09665484798'
Plan:ISDN, Type:Unknown
Mar 7 03:01:00.007: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=7
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=5 nr=7
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x8084
Cause i = 0x8286 - Channel unacceptable
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=6
Mar 7 03:01:03.995: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=7 nr=6
Mar 7 03:01:03.995: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x0084
Cause i = 0x80E6 - Recovery on timer expiry
Mar 7 03:01:03.995: ISDN Se0/0/0:15 **ERROR**: CCPCC_CallOrigination: SETUP timed-out (2nd T303) to NETWORK. The SETUP failed.
BR ,
SANDIPAN

Firefox will not work with Rabbit TV on the Golf Channel

2 months ago I purchased Rabbit TV and eliminated TV service through a cable provider.
I then went to the Golf Channel to watch live streaming golf.
I would not work with Firefox.
It left me with no option but to go back to MS Explorer, which works just fine.
I do not like Explorer but have not choice.
Have you corrected the issue?

Do the other channels work, just not golf?
Please check your plugins and see whether you have the following:
* Microsoft Windows Media Player Firefox Plugin 1.0.0.8
* Shockwave Flash 11.7.700.202
* Silverlight Plug-In 5.1.20125.0
You can check those here:
orange Firefox button (or Tools menu) > Add-ons > Plugins category
http://support.rabbittvgo.com/KB/a3/system-requirements.aspx

Photoshop CS2 will not work with RAW images in the Minolta DimAge A2. It use to work fine

I have used Photoshop CS 2 with my DimAge A2 for over 5 years in the RAW format. Now it will not work with RAW with my camera. I am using Vista 64.Any answers ? Thanks

It would seem to me that you have probably had to reinstall Photoshop CS 2. If that is the case, then you should download and install Camera Raw 3.7. The version that was on your install disk was updated several times. And one of those updates probably included support for your camera. Install ACR 3.7 and see if that helps.

Catalog Manager not working with https url

Hi,
On the BI server, we had to implement SSL and now I do not seem to be able to connect to the catalogue manager.
The connection to the BI User interface works fine with https, it is only the catalogue manager that shows this error:
Unknown connection error: sun.security.validar.Validator.Exception:PKIX path build failed:
sun.security.provider.certpah.SunCertPathBuilderException: unable to find
valid certification path to requested target
Thanks and Regards
G.

Hi,
Try to connect the catalogue manager by using below kind of URL.
e.x:
http://IP:9704/analytics/saw.dll
Thanks
Deva

File upload custom renaming not working with {KT_ext}

Hi,
I used many times custom renaming with file upload, and used {KT_ext} for file's extension, but in first ADDT project is not working. I use this:
$uploadObj->setRenameRule("{GET.id_cd}_{track}.{KT_ext}");
Does anybody know if {KT_ext} is broken in ADDT?
Thank you,
Ruben

Hi Günter,
{track} and {id_track} are both table fields, and setRenameRule worked right with both, but it didn't with {KT_ext}.
I've changed {track} with {id_track} in first page, and it stills fail to put extension.
But maybe is this, in first page the column for Update Transaction is like this
$upd_cds_peces->addColumn("mp3", "FILE_TYPE", "POST", "mp3");
and in the second page (where it works right) is
$upd_cds_peces->addColumn("mp3", "FILE_TYPE", "FILES", "mp3");
Althought in both cases the file is uploaded and DDBB field is filled, maybe in first case the TNG doesn't expect a file and cannot find its extension.
I'll try to change it,
thanks,
Ruben
Edit: Yes, it was this... Now it works. Thank you Günter for your help!

Web service client not working with HTTP Analyzer turned on

So the subject explains it all.
I have a simple JAXWS web service with @Policy(uri = "policy:Wssp1.2-2007-Https.xml") on remote secured (real SSL cert) Weblogic 10.3.5.
A simple client is generated in JDev 11.1.2.3 and run on my machine locally.
I'm really not sure I've tuned everything right with client certificates but the thing is when JDeveloper HTTP Analyzer is turned on client run gives bad_certificate SSLException.
With Analyzer turned off the service call is successfull.
javax.net.ssl.SSLKeyException: [Security:090542]Certificate chain received from localhost - 127.0.0.1 --> wl1n2.miit.ru was not trusted causing SSL handshake failureCould someone explain me this issue?

Puthanampatti,
First of all, how am I to determine what security folder is being used for certificates when I run local client in JDev?
My JDev folder is D:\JDeveloper-11.1.2.*3* and there's D:\JDeveloper-11.1.2.3\jdk160_24\jre\lib\security
My JDEV_USER_DIR is set to another folder: D:\JDeveloper-11.1.2.*2* \home so I'm not sure where should I import certificates.
To import a certificate I:
Open our https web site in Chrome browser. Click the HTTPS mark and expoer the certificate as Base64 (does it matter what encoding to use?) .cer file.
Then I open Windows command line and run setDomainEnv in my local weblogic folder:
D:\JDeveloper-11.1.2.2\home\system11.1.2.3.39.62.76.1\DefaultDomain\bin\setDomainEnv.exe
cd D:\JDeveloper-11.1.2.3\jdk160_24\jre\lib\security
keytool -import -alias miitcert -keystore cacerts -file d:\cer\miit-base64.cerA bit confusing might be the fact that system11.1.2.*3* folder is inside JDeveloper-11.1.2.*2* folder but that is how it is.
So that were the steps I did to import a certificate, but the problem with HTTP Analyzer is still here.
And what is demotrust.jks? There's no such file in security folder.

WSRP Provider reg not working with https url

Our portal is configured with https, listening to a virtual host (https://portalpilot:4443)
In order to consume WSRP / JSR168 java portlets we
- created a new OC4J container (wsrp_dev)
- installed the portlet-container ( $MIDTIERHOME/j2ee/wsrp_dev/ java -jar wsrp-install.jar)
- started the container & deployed the samples
all OK
but when trying to register the (tested & OK ) url https://portalpilot:4443/portalapp?WSDL
in the Provider Registration we got an error (error in provider url)
changing the url to the non-ssl host (http://gogol:7777) was the (pseudo) solution.
is this behavior by design? we would like to use SSL throughout

OOS,
Did the info in the release notes solve your problem?
It seems to me that the release notes address a similar but different issue. You want to run under https. The release notes are instructing you to change all references to https to http in the WSDL file. I don't see how this would fix the problem of trying to register a WSRP provider with a WSDL URL that uses https.
The reason I ask is because I am encountering the same problem.
Thanks.
Message was edited by:
user571987

My extension does not work with firefox 5 and need to be able to download firefox 3.6 or 4. every time try to find it it keeps directing to 5 which does not work with our gaming extensions, the features do now work with f/f5

My friends and I play Kingdom of Camelot, we use the greasemoney extension and various user scripts to play our game, the features in the extension do not work on verison 5 of firefox at this time, and we need to reload either firefox 4 or 3.6 to make them work efficiently.
Every time we go to download version 4, we get redirected to version 5 which we do not want.
I have am Mac laptop and a Windows laptop and would like rectify the problem on my laptops so I can play my game more effectively.
Regards
Monique Fornier

Yep, I understand...
This is the final news I needed to get to complete my answer... I confronted myself the italian store and the US one and in the US one I didn't find this product...
As for the NI software, was so good that I just bought back my good "old" iMac G5 and will exchange it with this my Intel Mac. The G5 2 Ghz was good, performing as this new Intel (at times I even got the impression was more performing, but I believe is just an impression) and surely didn't have so many 3rd parties problems.
Meanwhile I filled every forum of NI and USB with my questions about the compatibility... and maybe I will be back to an Intel Mac when all would be OK, I'm not in a hurry!
By the way I had a listen to your work: GREAT!
You may hear a sketch version of something we did work on with the NI piano and choir sounds, while the alto sax is played live and the other instruments are from Apple or real keys (yes, we mix a lot of things):
http://www.garageband.com/song?
while here is a track where we did use both the Orchestral sounds of Garageband (and some of it's loops, mixed with some good old programming) together with some NI sound:
http://www.garageband.com/song?
We do not often use orchestra if not as here and there (other than in some work as this last one, but is not so frequent). Hope you may like our little works!

Captivate 5.5 project -links are not working when i publish to the IE server

I was wondering if someone had a solution to my Captivate 5.5 project with external links.
Here is my problem:
I have a page that has an external link that opens another window.
For some reason the window will open in preview. However, when I publish to the IE browser it does not work.
Does someone have a solution to this problem? I saw some verbiage that stated adjusting something swf file. I don't quite understand were to change this file. Is it in Captivate?
Any information you have is greatly appreciated.
Thank you!
Kat

Google for information about Flash Global Security.
It looks like you need to trust the publish folder location as a trusted location in your Flash Global Security settings.

Servlets Not Working with PointBase Database

Hello All,
Background (This is more of a PointBase Question): I am developing a web application and am attempting to integrate a PointBase database with the app to capture my data.
Issue: While attempting to start and populate my database, I receive an error which reads (Class Not Found: JBDC driver com.pointbase.jdbc.jdbcUniversalDriver could not be loaded)
Question: Has anyone ever encountered this issue and resolved it?...or have any ideas about what could be the problem. Thanks for any assistance. RodneyM
Detail: I have the pbclient.jar file in the tomcat\common\lib directory.
My ant build.xml script is below....as well as my db schema.

<target name="createUserData">
<input message="Please enter username for table: "
addproperty="table.username" />
<copy file="db/data_template.sql" tofile="db/data.sql">
<filterset>
<filter token="username" value="${table.username}"/>
</filterset>
</copy>
</target>
<target name="createSchema">
<sql
driver="com.pointbase.jdbc.jdbcUniversalDriver"
url="jdbc:pointbase://localhost/dvdlibrary,new"
userid="PBPUBLIC"
password="PBPUBLIC"
classpath="${pointbase.home}/lib/pbclient.jar"
onerror="continue"
src="db/schema.sql"
/>
</target>
<target name="populateDatabase" depends="createSchema,createUserData">
<sql
driver="com.pointbase.jdbc.jdbcUniversalDriver"
url="jdbc:pointbase://localhost/dvdlibrary"
userid="PBPUBLIC"
password="PBPUBLIC"
classpath="${pointbase.home}/lib/pbclient.jar"
onerror="continue"
autocommit="true"
print="true"
src="db/data.sql"
/>
</target>


-- This is the Database Schema for the DVD Library Application.
-- Clear out the old table.
DROP TABLE ObjectIDs;
DROP TABLE Item;
-- This table represents the "next" object_ID for a given table.
CREATE TABLE ObjectIDs (
-- PRIMARY KEY --
table_name VARCHAR(30) PRIMARY KEY,
-- DATA FIELDS --
id INTEGER NOT NULL
-- This table represents the DVD Items
CREATE TABLE Item (
-- PRIMARY KEY --
id INTEGER PRIMARY KEY,
-- DATA FIELDS --
username VARCHAR(20) NOT NULL,
title VARCHAR(100) NOT NULL,
year CHAR(4) NOT NULL,
genre VARCHAR(20) NOT NULL
COMMIT;

Yeah. Millions of Java programmers have had the problem where something isn't in their classpath, and gone on to resolve it. In fact it's a rare Java programmer who hasn't had that problem.
Perhaps there's a conflict between this statement:"I have the pbclient.jar file in the tomcat\common\lib directory."And this configuration option:classpath="${pointbase.home}/lib/pbclient.jar"

URGENT: Jsp:Useben Not working with HashMap : Please HELP!

Hi,
I have a bean called DocBean (name, id - properties);
another bean called DocListBean (in that add() will put the DocBean to a hashtable- hashtable is created in its constructor.
the servlet creates the DocList & Doc Beans and by using add method, put all the doc in the doclist bean.
then, i put that in the request
req.setAttribute("doclistbean", doclistbean);
I use System.out.println for counting the no.of docbeans in the doclist. in java file it displays
System.out.println(docList.count() );
(displays .. : 5)
I have a jsp file, which has
<jsp:useBean id="docList" class="docListBean" scope="request"/>
then i display,
System.out.println(docList.count() );
this displays - 0
I don't understand why the bean has no(size=0) docBeans(hashtable) in JSP file ; but the servlet file displays all the docBeans(hashtable) with size 5.
Please help me..

Probably because your servlet put it into the session with the name of "doclistbean", but your JSP tries to use it with the name of "docList".

Airplay not working with an ASA in the middle

Hi All
This is my case: In the lab I could configure mDNS on my 5508 with the global multicast and igmp snooping disabled. Only I needed was Global mDNS multicast enabled (based on Cisco Guide) and it worked fine under the following scenarios:
All the services connected wireless
IPAD on subnet A and Apple TV on subnet B, no Firewall in the middle. Peer to Peer Blocking in the WLC was any DROP or DISABLED and it worked fine.
BUT, when I moved into production environment, the only way that it works is by having both Apple Devices in the same subnet with the Peer to Peer bloking DISABLED. I have a firewall ASA in the middle so I do not know what should I check in the firewall to allow Airplay to work.
However, there is something really weird. in the IPAD, I can see the AIRPLAY icon at the bottom of the screen, when I click on it, I can see MIRRORING button and I moved it to the right to activated it BUT nothing happens on the AppleTV connected to an screen. I mean, looks like the request for MIRRORING from the IPAD to the Apple TV device is not reaching the last one. A few seconds after activating MIRRORING in the IPAD looks like the request is dropped since that the mirroring is not active.
Is there any particular multicast configuration required in the ASA including ports (like 5353 udp)?
I have an open case with TAC but any ideas are welcomed.
By the way, I am running v 7.6 in the WLC in order to implement mDNS (traffic between ssid's subnet managed by the WLC - Bonjour Gateway is not neccesary)
thanks
Abraham

Hi David,
Let me share with you my findings. Apple TV requires more than 5353 port opened. Please see the following link and include in your ASA those additional ports/range. I mean, 7000, 7100, 5000 (udp/tcp), etc etc.
http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/apple-macbook-airplay-appletv-firewall-port-findings/td-p/55048
After opening those ports, the service is working BUT with significant LATENCY/SLOWNESS which we are trying to solve.
We took some packets captures on the ASA ingress/egress interfaces for both contexts (see pictures attached) and I could see many retransmissions and duplicated ACK so I tried something else that worked (see Apple TV Works attached file) BUT this is not the final solution we need so we are still working on this issue in order to check if there is something wrong with our routing/switching process in the 6500 LAN SW.
I created static routes in the ASA contexts to communicate the IPAD to the APPLE TV (ports already opened in the ASA as indicated before) without traversing the Wireless 6500 SW (test performed on VLAN A and VLAN B) and it worked fine. However as I said, this is not the solution we want because the Wireless 6500 SW must manage inter-ASA-contexts traffic.
In addition to that I attached another picture/diagram that shows when Apple TV service fails-latency (traffic crossing the Wireless 6500 SW for communication between ASA contexts).
Important to say that I am NOT using MULTICAST or BROADCAST ENABLED in the WLC. I am based on mDNS as indicated in the Cisco Guide/Instructions for version 7.5 and above.
Hope this helps.

10.3.9 clients not working with 10.4.9 open directory server

I have a 10.4.9 server running open directory and managing about 20 10.4.9 clients. I am trying to have it manage our remaining 10.3.9 clients, but for whatever reason, I cannot seem to get the 10.3 clients to "attach" to the server.
I have the 10.3 clients set up in a computer list on the server, and in directory access I have it set to "get ldap mappings from server". At one point, it was suggested to me that I have the clients "get ldap mappings from open directory server". I tried this, and manually set the search base suffix. My search base suffix was "dc=example,dc=local". I even tried doing "cn=config,dc=example,dc=local" (where in both cases example.local was replaced with my real DNS name). Any suggestions on what else I could try to get this to work?

That's the odd thing though. I've done this with 10.4 no problem. Settings always worked. For some reason though, even though the clients are able to login using a network user, none of the preference settings sync.
For example - I always put a loginwindow message on as a sort of "test" to see if preferences are being set. If that works, then I rarely have a problem. No matter what I do, though, I cannot get the loginwindow message to display on the 10.3 clients. It works really well on 10.4, but not at all on 10.3. I've tried this on multiple 10.3 machines, as well, (and they're both based on different system images) but it still doesn't work. When I get back to work on Friday, I'll have to see if preferences will work for network users; that's the one thing I haven't tried.
Other than dumping the directoryaccess preferences, is there another preference setting that could be dumped on the client that may make it grab prefs from the server?

Urgent--custom servlet not working with https/gateway of the portal server

Similar Messages

Maybe you are looking for