URGENT: depmod error building kernel26cko

if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F System.map -b /var/abs/aur/kernel26cko/pkg -r 2.6.12-cko2-swsusp2; fi
WARNING: /var/abs/aur/kernel26cko/pkg/lib/modules/2.6.12-cko2-swsusp2/kernel/drivers/isdn/hysdn/hysdn.ko needs unknown symbol cli
WARNING: /var/abs/aur/kernel26cko/pkg/lib/modules/2.6.12-cko2-swsusp2/kernel/drivers/isdn/hysdn/hysdn.ko needs unknown symbol restore_flags
WARNING: /var/abs/aur/kernel26cko/pkg/lib/modules/2.6.12-cko2-swsusp2/kernel/drivers/isdn/hysdn/hysdn.ko needs unknown symbol save_flags
WARNING: /var/abs/aur/kernel26cko/pkg/lib/modules/2.6.12-cko2-swsusp2/kernel/drivers/isdn/hysdn/hysdn.ko needs unknown symbol sti
Can some confirm that this is a non-critical error before a commit the pkg to [community], please![/code]

It's non fatal assuming no one uses the hysdn module (ISDN stuff - who uses that?)
Documentation/isdn/README.hysdn wrote:
6. Where to get additional info and help
   If you have any problems concerning the driver or configuration contact
   the Hypercope support team ([email protected]) and or the authors
   Werner Cornelius (werner@isdn4linux or [email protected]) or
   Ulrich Albrecht ([email protected]).
edit: I'm tempted to say, just compile it out for now - there can't be a large community need for ISDN drivers 8)

Similar Messages

  • Depmod error: failed to load symbols from ...

    Hello,
    I installed today arch and the installation went well except nvidia-340xx install gave me this error messsage; now, X wont start.
    depmod ERROR: failed to load symbols from /lib/modules/3.16.4-1-ARCH/kernel/drivers/usb/wusbcore/wusbcore.ko.gz invalide argument
    Any idea?

    Scimmia wrote:failed to load symbols doesn't sound good. It may need a reinstall of the kernel if something got corrupted on disk.
    This is exactly what i have done and the error message went away.
    But at boot still hangs.
    This is the Xorg.1.log file:
    [ 46.713]
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 46.713] X Protocol Version 11, Revision 0
    [ 46.714] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 46.714] Current Operating System: Linux myhost 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
    [ 46.714] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=33a28745-d878-4b98-a9ab-dee48b53a9b2 rw quiet
    [ 46.714] Build Date: 21 September 2014 10:53:13AM
    [ 46.714]
    [ 46.714] Current version of pixman: 0.32.6
    [ 46.715] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 46.715] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 46.716] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Oct 16 15:26:17 2014
    [ 46.717] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 46.717] (==) No Layout section. Using the first Screen section.
    [ 46.717] (==) No screen section available. Using defaults.
    [ 46.717] (**) |-->Screen "Default Screen Section" (0)
    [ 46.717] (**) | |-->Monitor "<default monitor>"
    [ 46.717] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 46.717] (==) Automatically adding devices
    [ 46.717] (==) Automatically enabling devices
    [ 46.717] (==) Automatically adding GPU devices
    [ 46.717] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 46.717] Entry deleted from font path.
    [ 46.718] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 46.718] Entry deleted from font path.
    [ 46.718] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 46.718] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 46.718] Entry deleted from font path.
    [ 46.718] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 46.718] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 46.718] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 46.718] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 46.718] (II) Loader magic: 0x818d80
    [ 46.718] (II) Module ABI versions:
    [ 46.718] X.Org ANSI C Emulation: 0.4
    [ 46.718] X.Org Video Driver: 18.0
    [ 46.718] X.Org XInput driver : 21.0
    [ 46.718] X.Org Server Extension : 8.0
    [ 46.725] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 46.725] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 46.726] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 1
    [ 46.726] (EE) Error systemd-logind returned paused fd for drm node
    [ 46.726] (II) systemd-logind: releasing fd for 226:0
    [ 46.729] (--) PCI:*(0:1:0:0) 10de:0404:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
    [ 46.729] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 46.729] (II) LoadModule: "glx"
    [ 46.730] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 46.775] (II) Module glx: vendor="NVIDIA Corporation"
    [ 46.775] compiled for 4.0.2, module version = 1.0.0
    [ 46.775] Module class: X.Org Server Extension
    [ 46.775] (II) NVIDIA GLX Module 340.46 Wed Sep 24 13:54:14 PDT 2014
    [ 46.775] (==) Matched nouveau as autoconfigured driver 0
    [ 46.775] (==) Matched nvidia as autoconfigured driver 1
    [ 46.775] (==) Matched nv as autoconfigured driver 2
    [ 46.775] (==) Matched modesetting as autoconfigured driver 3
    [ 46.775] (==) Matched fbdev as autoconfigured driver 4
    [ 46.775] (==) Matched vesa as autoconfigured driver 5
    [ 46.775] (==) Assigned the driver to the xf86ConfigLayout
    [ 46.775] (II) LoadModule: "nouveau"
    [ 46.775] (WW) Warning, couldn't open module nouveau
    [ 46.775] (II) UnloadModule: "nouveau"
    [ 46.775] (II) Unloading nouveau
    [ 46.775] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 46.775] (II) LoadModule: "nvidia"
    [ 46.775] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 46.776] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 46.776] compiled for 4.0.2, module version = 1.0.0
    [ 46.776] Module class: X.Org Video Driver
    [ 46.776] (II) LoadModule: "nv"
    [ 46.777] (WW) Warning, couldn't open module nv
    [ 46.777] (II) UnloadModule: "nv"
    [ 46.777] (II) Unloading nv
    [ 46.777] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 46.777] (II) LoadModule: "modesetting"
    [ 46.777] (WW) Warning, couldn't open module modesetting
    [ 46.777] (II) UnloadModule: "modesetting"
    [ 46.777] (II) Unloading modesetting
    [ 46.777] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 46.777] (II) LoadModule: "fbdev"
    [ 46.777] (WW) Warning, couldn't open module fbdev
    [ 46.777] (II) UnloadModule: "fbdev"
    [ 46.777] (II) Unloading fbdev
    [ 46.777] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 46.777] (II) LoadModule: "vesa"
    [ 46.777] (WW) Warning, couldn't open module vesa
    [ 46.778] (II) UnloadModule: "vesa"
    [ 46.778] (II) Unloading vesa
    [ 46.778] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 46.778] (II) NVIDIA dlloader X Driver 340.46 Wed Sep 24 13:34:03 PDT 2014
    [ 46.778] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 46.778] (++) using VT number 2
    [ 46.778] (--) controlling tty is VT number 2, auto-enabling KeepTty
    [ 46.778] (II) Loading sub module "fb"
    [ 46.778] (II) LoadModule: "fb"
    [ 46.778] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 46.778] (II) Module fb: vendor="X.Org Foundation"
    [ 46.778] compiled for 1.16.1, module version = 1.0.0
    [ 46.778] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 46.778] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 46.778] (II) Loading sub module "wfb"
    [ 46.778] (II) LoadModule: "wfb"
    [ 46.778] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 46.779] (II) Module wfb: vendor="X.Org Foundation"
    [ 46.779] compiled for 1.16.1, module version = 1.0.0
    [ 46.779] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 46.779] (II) Loading sub module "ramdac"
    [ 46.779] (II) LoadModule: "ramdac"
    [ 46.779] (II) Module "ramdac" already built-in
    [ 46.779] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 46.779] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 46.779] (==) NVIDIA(0): RGB weight 888
    [ 46.779] (==) NVIDIA(0): Default visual is TrueColor
    [ 46.779] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 46.780] (**) NVIDIA(0): Enabling 2D acceleration
    [ 46.904] (II) NVIDIA(0): Display (Acer AL2016W (DFP-0)) does not support NVIDIA 3D
    [ 46.904] (II) NVIDIA(0): Vision stereo.
    [ 46.904] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 46.906] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G84) at PCI:1:0:0 (GPU-0)
    [ 46.906] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 46.906] (--) NVIDIA(0): VideoBIOS: 60.84.68.00.00
    [ 46.906] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 46.909] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
    [ 46.909] (--) NVIDIA(0): CRT-0
    [ 46.909] (--) NVIDIA(0): CRT-1
    [ 46.909] (--) NVIDIA(0): TV-0
    [ 46.909] (--) NVIDIA(0): Acer AL2016W (DFP-0) (boot, connected)
    [ 46.909] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 46.909] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
    [ 46.909] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
    [ 46.909] (--) NVIDIA(0): Acer AL2016W (DFP-0): Internal TMDS
    [ 46.909] (--) NVIDIA(GPU-0): Acer AL2016W (DFP-0): 330.0 MHz maximum pixel clock
    [ 46.909] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46.909] (**) NVIDIA(0): device Acer AL2016W (DFP-0) (Using EDID frequencies has
    [ 46.909] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46.914] (==) NVIDIA(0):
    [ 46.914] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 46.914] (==) NVIDIA(0): will be used as the requested mode.
    [ 46.914] (==) NVIDIA(0):
    [ 46.914] (II) NVIDIA(0): Validated MetaModes:
    [ 46.914] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
    [ 46.914] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
    [ 46.951] (--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
    [ 46.951] (--) NVIDIA(0): option
    [ 46.951] (--) Depth 24 pixmap format is 32 bpp
    [ 46.951] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 46.955] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 46.955] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 46.955] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 46.955] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 46.955] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 46.955] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 46.955] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 46.955] (II) NVIDIA(0): Config Options in the README.
    [ 46.958] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
    [ 47.037] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 47.037] (==) NVIDIA(0): Backing store enabled
    [ 47.037] (==) NVIDIA(0): Silken mouse enabled
    [ 47.038] (==) NVIDIA(0): DPMS enabled
    [ 47.038] (II) Loading sub module "dri2"
    [ 47.038] (II) LoadModule: "dri2"
    [ 47.038] (II) Module "dri2" already built-in
    [ 47.038] (II) NVIDIA(0): [DRI2] Setup complete
    [ 47.038] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 47.038] (--) RandR disabled
    [ 47.045] (II) Initializing extension GLX
    [ 47.102] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 47.102] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 47.102] (II) LoadModule: "evdev"
    [ 47.102] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 47.102] (II) Module evdev: vendor="X.Org Foundation"
    [ 47.102] compiled for 1.16.0, module version = 2.9.0
    [ 47.102] Module class: X.Org XInput Driver
    [ 47.102] ABI class: X.Org XInput driver, version 21.0
    [ 47.103] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
    [ 47.103] (II) Using input driver 'evdev' for 'Power Button'
    [ 47.103] (**) Power Button: always reports core events
    [ 47.103] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 47.103] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 47.103] (--) evdev: Power Button: Found keys
    [ 47.103] (II) evdev: Power Button: Configuring as keyboard
    [ 47.103] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 47.103] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 47.103] (**) Option "xkb_rules" "evdev"
    [ 47.103] (**) Option "xkb_model" "pc104"
    [ 47.103] (**) Option "xkb_layout" "us"
    [ 47.141] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 47.141] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 47.142] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 29 paused 0
    [ 47.142] (II) Using input driver 'evdev' for 'Power Button'
    [ 47.142] (**) Power Button: always reports core events
    [ 47.142] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 47.142] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 47.142] (--) evdev: Power Button: Found keys
    [ 47.142] (II) evdev: Power Button: Configuring as keyboard
    [ 47.142] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
    [ 47.142] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 47.142] (**) Option "xkb_rules" "evdev"
    [ 47.142] (**) Option "xkb_model" "pc104"
    [ 47.142] (**) Option "xkb_layout" "us"
    [ 47.142] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 47.142] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 47.143] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 30 paused 1
    [ 47.143] (EE) Error systemd-logind returned paused fd for drm node
    [ 47.143] (II) systemd-logind: releasing fd for 226:0
    [ 47.144] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event1)
    [ 47.144] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
    [ 47.144] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 31 paused 0
    [ 47.144] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
    [ 47.144] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
    [ 47.144] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event1"
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x40
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
    [ 47.144] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
    [ 47.144] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Adding scrollwheel support
    [ 47.144] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
    [ 47.144] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 47.144] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/0003:045E:0040.0001/input/input1/event1"
    [ 47.144] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 8)
    [ 47.144] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
    [ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
    [ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
    [ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
    [ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
    [ 47.145] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
    [ 47.145] (II) No input driver specified, ignoring this device.
    [ 47.145] (II) This device may have been added with another device file.
    [ 47.145] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event5)
    [ 47.145] (II) No input driver specified, ignoring this device.
    [ 47.145] (II) This device may have been added with another device file.
    [ 47.146] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event6)
    [ 47.146] (II) No input driver specified, ignoring this device.
    [ 47.146] (II) This device may have been added with another device file.
    [ 47.146] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
    [ 47.146] (II) No input driver specified, ignoring this device.
    [ 47.146] (II) This device may have been added with another device file.
    [ 47.146] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event8)
    [ 47.146] (II) No input driver specified, ignoring this device.
    [ 47.146] (II) This device may have been added with another device file.
    [ 47.147] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
    [ 47.147] (II) No input driver specified, ignoring this device.
    [ 47.147] (II) This device may have been added with another device file.
    [ 47.147] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 47.147] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 47.147] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
    [ 47.147] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 47.147] (**) AT Translated Set 2 keyboard: always reports core events
    [ 47.148] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 47.148] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 47.148] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 47.148] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 47.148] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 47.148] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 47.148] (**) Option "xkb_rules" "evdev"
    [ 47.148] (**) Option "xkb_model" "pc104"
    [ 47.148] (**) Option "xkb_layout" "us"
    [ 47.148] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 47.148] (II) No input driver specified, ignoring this device.
    [ 47.148] (II) This device may have been added with another device file.
    [ 79.735] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 79.735] (II) UnloadModule: "evdev"
    [ 79.735] (II) systemd-logind: releasing fd for 13:64
    [ 79.763] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Close
    [ 79.763] (II) UnloadModule: "evdev"
    [ 79.763] (II) systemd-logind: releasing fd for 13:65
    [ 79.826] (II) evdev: Power Button: Close
    [ 79.826] (II) UnloadModule: "evdev"
    [ 79.826] (II) systemd-logind: releasing fd for 13:66
    [ 79.853] (II) evdev: Power Button: Close
    [ 79.853] (II) UnloadModule: "evdev"
    [ 79.853] (II) systemd-logind: releasing fd for 13:67
    [ 80.240] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 80.242] (EE) Server terminated successfully (0). Closing log file.

  • Depmod error messages during linux-lts update, more after reinstalling

    I just updated and during the module dependencies update of the linux-lts package (i686) the following depmod errors appeared:
    >>> Updating module dependencies. Please wait ...
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/i2c/busses/i2c-piix4.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/i2c/busses/i2c-ocores.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/i2c/busses/i2c-pxa.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/comedi_test.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/serial2002.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/amplc_dio200.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/pcl812.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/rti800.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/rti802.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/das6402.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/dt2801.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/ni_at_ao.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/multiq3.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/addi_apci_2200.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/addi_apci_3501.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/adl_pci9111.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/adv_pci1724.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/contec_pci_dio.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/ni_pcimio.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/comedi/drivers/ni_mio_cs.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/rtl8187se/r8187se.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/rtl8192u/r8192u_usb.ko.gz: Invalid argument
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/vt6655/vt6655_stage.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/wlags49_h2/wlags49_h2_cs.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/wlags49_h25/wlags49_h25_cs.ko.gz: Exec format error
    depmod: ERROR: failed to load symbols from /lib/modules/3.10.26-1-lts/kernel/drivers/staging/speakup/speakup.ko.gz: Exec format error
    As far as I can tell the later process of building the images (normal and fallback) went on without any issues despite these.
    If I try to reinstall the package the error messages change into extract errors f.e.
    (Can't create '/usr/lib/modules/3.10.26-1-lts/kernel/drivers/net/ethernet/atheros/atl1e/atl1e.ko.gz')
    And end up much worse,
    >>> Updating module dependencies. Please wait ...
    >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
    -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
    ==> Starting build: 3.10.26-1-lts
    -> Running build hook: [base]
    -> Running build hook: [udev]
    -> Running build hook: [modconf]
    -> Running build hook: [block]
    ==> ERROR: module not found: `libfc'
    ==> ERROR: module not found: `libfc'
    ==> ERROR: module not found: `cnic'
    ==> ERROR: module not found: `libfc'
    ==> ERROR: module not found: `cnic'
    ==> ERROR: module not found: `cdrom'
    ==> ERROR: module not found: `parport'
    ==> ERROR: module not found: `enclosure'
    ==> WARNING: Possibly missing firmware for module: bfa
    ==> WARNING: Possibly missing firmware for module: aic94xx
    ==> ERROR: module not found: `libfc'
    ==> ERROR: module not found: `parport'
    ==> ERROR: module not found: `target_core_mod'
    ==> ERROR: module not found: `cxgb4'
    ==> ERROR: module not found: `cxgb3'
    ==> ERROR: module not found: `cdrom'
    ==> ERROR: module not found: `tifm_core'
    ==> ERROR: module not found: `usbcore'
    ==> ERROR: module not found: `tifm_core'
    ==> ERROR: module not found: `cb710'
    ==> ERROR: module not found: `rtsx_pci'
    ==> ERROR: module not found: `usbcore'
    -> Running build hook: [resume]
    -> Running build hook: [filesystems]
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `encrypted-keys'
    ==> ERROR: module not found: `quota_tree'
    ==> ERROR: module not found: `ocfs2_nodemanager'
    ==> ERROR: module not found: `ocfs2_dlm'
    ==> ERROR: module not found: `ocfs2_nodemanager'
    ==> ERROR: module not found: `dlm'
    ==> ERROR: module not found: `mtd'
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `nfs_acl'
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `fscache'
    -> Running build hook: [keyboard]
    ==> ERROR: module not found: `usbhid'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    -> Running build hook: [fsck]
    ==> Generating module dependencies
    ==> Creating gzip initcpio image: /boot/initramfs-linux-lts.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
    -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
    ==> Starting build: 3.10.26-1-lts
    -> Running build hook: [base]
    -> Running build hook: [udev]
    -> Running build hook: [modconf]
    -> Running build hook: [block]
    ==> ERROR: module not found: `libfc'
    ==> ERROR: module not found: `libfc'
    ==> ERROR: module not found: `cnic'
    ==> ERROR: module not found: `libfc'
    ==> ERROR: module not found: `cnic'
    ==> ERROR: module not found: `cdrom'
    ==> ERROR: module not found: `parport'
    ==> ERROR: module not found: `enclosure'
    ==> WARNING: Possibly missing firmware for module: bfa
    ==> WARNING: Possibly missing firmware for module: aic94xx
    ==> ERROR: module not found: `libfc'
    ==> ERROR: module not found: `parport'
    ==> ERROR: module not found: `target_core_mod'
    ==> ERROR: module not found: `cxgb4'
    ==> ERROR: module not found: `cxgb3'
    ==> ERROR: module not found: `cdrom'
    ==> ERROR: module not found: `tifm_core'
    ==> ERROR: module not found: `usbcore'
    ==> ERROR: module not found: `tifm_core'
    ==> ERROR: module not found: `cb710'
    ==> ERROR: module not found: `rtsx_pci'
    ==> ERROR: module not found: `usbcore'
    -> Running build hook: [resume]
    -> Running build hook: [filesystems]
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `encrypted-keys'
    ==> ERROR: module not found: `quota_tree'
    ==> ERROR: module not found: `ocfs2_nodemanager'
    ==> ERROR: module not found: `ocfs2_dlm'
    ==> ERROR: module not found: `ocfs2_nodemanager'
    ==> ERROR: module not found: `dlm'
    ==> ERROR: module not found: `mtd'
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `nfs_acl'
    ==> ERROR: module not found: `fscache'
    ==> ERROR: module not found: `fscache'
    -> Running build hook: [keyboard]
    ==> ERROR: module not found: `usbhid'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    ==> ERROR: module not found: `i2c-core'
    -> Running build hook: [fsck]
    ==> Generating module dependencies
    ==> Creating gzip initcpio image: /boot/initramfs-linux-lts-fallback.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    Any hint on what is happening here? Fortunately I am using lts as backup kernel though others may not be that lucky if they encounter the same issue(s).

    @root: Sorry for kind of hijacking your thread, but it seems like our issues are related. It is the same libgcrypt version, but I'm getting a similar error by just upgrading linux-lts, systemd, and libgcrypt at the same time. Oh, and you should know better than use ancient versions of X11 in Arch ;-)
    @scimmia: here is the full pacman.log snippet, including the original "pacman -Syu" and the followup "pacman -S linux-lts". It is the linux-lts mkinitcpio [systemd] hook that complains about unsatisfied dependencies, nothing "calls" systemctl:
    [2014-01-13 17:05] [PACMAN] Running 'pacman -Syu'
    [2014-01-13 17:05] [PACMAN] synchronizing package lists
    [2014-01-13 17:05] [PACMAN] starting full system upgrade
    [2014-01-13 17:06] [PACMAN] upgraded libgcrypt (1.5.3-1 -> 1.6.0-1)
    [2014-01-13 17:06] [PACMAN] upgraded cryptsetup (1.6.3-1 -> 1.6.3-2)
    [2014-01-13 17:06] [PACMAN] upgraded pth (2.0.7-4 -> 2.0.7-5)
    [2014-01-13 17:06] [PACMAN] upgraded dirmngr (1.1.1-1 -> 1.1.1-2)
    [2014-01-13 17:06] [PACMAN] upgraded ffmpeg (1:2.1.1-3 -> 1:2.1.2-1)
    [2014-01-13 17:06] [PACMAN] upgraded gdbm (1.10-3 -> 1.11-1)
    [2014-01-13 17:06] [PACMAN] upgraded gettext (0.18.3.1-2 -> 0.18.3.2-1)
    [2014-01-13 17:06] [PACMAN] upgraded gnupg (2.0.22-1 -> 2.0.22-2)
    [2014-01-13 17:06] [PACMAN] upgraded iptables (1.4.20-1 -> 1.4.21-1)
    [2014-01-13 17:06] [PACMAN] upgraded iproute2 (3.11.0-1 -> 3.12.0-1)
    [2014-01-13 17:06] [PACMAN] upgraded libquvi (0.9.4-1 -> 0.9.4-2)
    [2014-01-13 17:06] [PACMAN] upgraded libsecret (0.16-1 -> 0.16-2)
    [2014-01-13 17:06] [PACMAN] upgraded libwbclient (4.1.3-1 -> 4.1.4-1)
    [2014-01-13 17:06] [PACMAN] upgraded libxslt (1.1.28-2 -> 1.1.28-3)
    [2014-01-13 17:06] [PACMAN] upgraded libzip (0.11.1-2 -> 0.11.2-1)
    [2014-01-13 17:06] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-01-13 17:06] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Starting build: 3.10.26-1-lts
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/lib/systemd/systemd-journald'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts.img
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Starting build: 3.10.26-1-lts
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/bin/systemctl'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> ERROR: binary dependency `libgcrypt.so.11' not found for `/usr/lib/systemd/systemd-journald'
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts-fallback.img
    [2014-01-13 17:06] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-13 17:06] [PACMAN] upgraded linux-lts (3.10.25-1 -> 3.10.26-1)
    [2014-01-13 17:06] [PACMAN] upgraded linux-lts-headers (3.10.25-1 -> 3.10.26-1)
    [2014-01-13 17:06] [PACMAN] upgraded man-pages (3.55-1 -> 3.56-1)
    [2014-01-13 17:06] [PACMAN] upgraded perl (5.18.1-1 -> 5.18.2-2)
    [2014-01-13 17:06] [PACMAN] upgraded rasqal (1:0.9.30-3 -> 1:0.9.30-4)
    [2014-01-13 17:06] [PACMAN] upgraded smbclient (4.1.3-1 -> 4.1.4-1)
    [2014-01-13 17:06] [PACMAN] upgraded systemd (208-3 -> 208-10)
    [2014-01-13 17:06] [PACMAN] upgraded virtualbox-guest-modules-lts (4.3.6-2 -> 4.3.6-3)
    [2014-01-13 17:06] [PACMAN] upgraded xorg-server-common (1.14.5-2 -> 1.15.0-5)
    [2014-01-13 17:06] [PACMAN] upgraded xf86-input-evdev (2.8.2-1 -> 2.8.2-2)
    [2014-01-13 17:06] [PACMAN] installed libxshmfence (1.1-1)
    [2014-01-13 17:06] [PACMAN] upgraded xorg-server (1.14.5-2 -> 1.15.0-5)
    [2014-01-13 17:06] [PACMAN] upgraded virtualbox-guest-utils (4.3.6-2 -> 4.3.6-3)
    [2014-01-13 17:06] [PACMAN] upgraded vlc (2.1.2-1 -> 2.1.2-2)
    [2014-01-13 17:06] [PACMAN] upgraded xextproto (7.2.1-1 -> 7.3.0-1)
    [2014-01-13 17:07] [PACMAN] Running 'pacman -S linux-lts'
    [2014-01-13 17:07] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-01-13 17:07] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Starting build: 3.10.26-1-lts
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts.img
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Starting build: 3.10.26-1-lts
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts-fallback.img
    [2014-01-13 17:07] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-13 17:07] [PACMAN] reinstalled linux-lts (3.10.26-1)
    Last edited by rubenvb (2014-01-15 14:19:48)

  • Urgent,showing error while running form..pls,help...

    Hi,
    I have created my own view named GP_NUIF_V and have also successfully established a Database connection,using FWK_TBX_TUTORIAL.I have developed a personal page in Oracle9i JDeveloper ,which is to fetch particular details from my view and show it .. but whenever I run my form I am continuously getting this type of error..pls,help me out ,as my project delivery is nearing..for this I am not been able to head on to registering the form..I have checked from Pl/Sql developer that my query is just running fine as I wanted it to be..I have also changed the FNDNAM in the .dbc file to my view name but it is giving me the same error..please,look at my error and suggest all other ways in how I can solve my problem ,as early as possible..
    Error Page
    Exception Details.
    oracle.apps.fnd.framework.OAException: oracle.adf.mds.exception.MDSRuntimeException
         at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1064)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1794)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)
    ## Detail 0 ##
    oracle.adf.mds.exception.MDSRuntimeException
         at oracle.adf.mds.internal.MUnResolvedState.resolveState(MUnResolvedState.java:193)
         at oracle.adf.mds.internal.ElementData.resolveState(ElementData.java:509)
         at oracle.adf.mds.internal.ElementData.getUntransAttrVal(ElementData.java:922)
         at oracle.adf.mds.internal.ElementData.getAttrVal(ElementData.java:835)
         at oracle.adf.mds.internal.ElementData.getAttributeValue(ElementData.java:260)
         at oracle.adf.mds.internal.Cache.getAttribute(Cache.java:237)
         at oracle.adf.mds.internal.MetadataManagerBase.getAttributeValueInternal(MetadataManagerBase.java:1069)
         at oracle.adf.mds.internal.MElementImpl.getAttrValueOrExpression(MElementImpl.java:620)
         at oracle.adf.mds.internal.MElementImpl.getAttributeValue(MElementImpl.java:230)
         at oracle.adf.mds.MElement.getLocalRef(MElement.java:291)
         at oracle.apps.fnd.framework.webui.JRADWebBeanMetaData.getUINodeName(JRADWebBeanMetaData.java:1812)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:223)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
         at oracle.apps.fnd.framework.webui.OARowLayoutHelper.setMetaDataProperties(OARowLayoutHelper.java:74)
         at oracle.apps.fnd.framework.webui.OARowLayoutHelper.createWebBean(OARowLayoutHelper.java:53)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:229)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
         at oracle.apps.fnd.framework.webui.OAContentContainerHelper.setMetaDataProperties(OAContentContainerHelper.java:74)
         at oracle.apps.fnd.framework.webui.OAContentContainerHelper.createWebBean(OAContentContainerHelper.java:55)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.addAkChildren(OAPageLayoutHelper.java:657)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.setMetaDataProperties(OAPageLayoutHelper.java:243)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.createWebBean(OAPageLayoutHelper.java:194)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:993)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:902)
         at oracle.apps.fnd.framework.webui.OAPageBean.createRootWebBean(OAPageBean.java:3966)
         at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:1962)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1562)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)
    oracle.adf.mds.exception.MDSRuntimeException
         at oracle.adf.mds.internal.MUnResolvedState.resolveState(MUnResolvedState.java:193)
         at oracle.adf.mds.internal.ElementData.resolveState(ElementData.java:509)
         at oracle.adf.mds.internal.ElementData.getUntransAttrVal(ElementData.java:922)
         at oracle.adf.mds.internal.ElementData.getAttrVal(ElementData.java:835)
         at oracle.adf.mds.internal.ElementData.getAttributeValue(ElementData.java:260)
         at oracle.adf.mds.internal.Cache.getAttribute(Cache.java:237)
         at oracle.adf.mds.internal.MetadataManagerBase.getAttributeValueInternal(MetadataManagerBase.java:1069)
         at oracle.adf.mds.internal.MElementImpl.getAttrValueOrExpression(MElementImpl.java:620)
         at oracle.adf.mds.internal.MElementImpl.getAttributeValue(MElementImpl.java:230)
         at oracle.adf.mds.MElement.getLocalRef(MElement.java:291)
         at oracle.apps.fnd.framework.webui.JRADWebBeanMetaData.getUINodeName(JRADWebBeanMetaData.java:1812)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:223)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
         at oracle.apps.fnd.framework.webui.OARowLayoutHelper.setMetaDataProperties(OARowLayoutHelper.java:74)
         at oracle.apps.fnd.framework.webui.OARowLayoutHelper.createWebBean(OARowLayoutHelper.java:53)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:229)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
         at oracle.apps.fnd.framework.webui.OAContentContainerHelper.setMetaDataProperties(OAContentContainerHelper.java:74)
         at oracle.apps.fnd.framework.webui.OAContentContainerHelper.createWebBean(OAContentContainerHelper.java:55)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.addAkChildren(OAPageLayoutHelper.java:657)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.setMetaDataProperties(OAPageLayoutHelper.java:243)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.createWebBean(OAPageLayoutHelper.java:194)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:993)
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:902)
         at oracle.apps.fnd.framework.webui.OAPageBean.createRootWebBean(OAPageBean.java:3966)
         at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:1962)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1562)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)

    Don't put reposts. Follow the issue at one place Re: Urgent,showing error while running form..pls,help...
    --Shiv                                                                                                                                                                                                                                                                   

  • Error building gnomad2, missing libraries?

    Hello!
    Im trying to build the new version of gnomad2, which is a GTK based app for interacting with the Creative zen jukebox I have. I have been using version 2.6.3 for a while, and today they released a new version, 2.7.0. I have build the previous versions of gnomad2 without problems, but when I try to build the 2.7.0, make fails:
    gnomad2.c: In function `scan_jukebox':
    gnomad2.c:264: error: `GNOME_STOCK_BUTTON_CANCEL' undeclared (first use in this function)
    gnomad2.c:264: error: (Each undeclared identifier is reported only once
    gnomad2.c:264: error: for each function it appears in.)
    gnomad2.c:265: warning: assignment makes pointer from integer without a cast
    gnomad2.c:270: error: invalid type argument of `->'
    gnomad2.c:274: error: invalid type argument of `->'
    gnomad2.c: In function `set_jukeboxowner_dialog':
    gnomad2.c:311: error: `GNOME_STOCK_BUTTON_OK' undeclared (first use in this function)
    gnomad2.c:312: error: `GNOME_STOCK_BUTTON_CANCEL' undeclared (first use in this function)
    gnomad2.c:313: warning: assignment makes pointer from integer without a cast
    gnomad2.c:324: error: invalid type argument of `->'
    gnomad2.c:330: error: invalid type argument of `->'
    gnomad2.c: In function `main':
    gnomad2.c:360: error: `GnomeProgram' undeclared (first use in this function)
    gnomad2.c:360: error: `gnomad' undeclared (first use in this function)
    gnomad2.c:389: error: `LIBGNOMEUI_MODULE' undeclared (first use in this function)
    gnomad2.c:390: error: `GNOME_PARAM_POPT_TABLE' undeclared (first use in this function)
    gnomad2.c:391: error: `GNOME_PROGRAM_STANDARD_PROPERTIES' undeclared (first use in this function)
    gnomad2.c:413: warning: assignment makes pointer from integer without a cast
    make[1]: *** [gnomad2.o] Error 1
    make[1]: Leaving directory `/home/krigun/downloads/gnomad2/src/gnomad2-2.7.0/src'
    make: *** [all-recursive] Error 1
    ==> ERROR: Build Failed. Aborting...
    I have checked, I have all the dependecies listed below, but I do not have Gnome installed, I only use KDE.
    Gnomad dependencies:
    Gnomad +
    |
    +- GTK+-2.0 (incl GDK, GLIB)
    |
    +- libgnomeui
    |
    +- libnjb +
    | |
    | +- libusb (optional on *BSD)
    |
    +- libid3tag
    |
    +- GNOME 2.0
    and the PKGBUILD:
    pkgname=gnomad2
    pkgver=2.7.0
    pkgrel=1
    pkgdesc="gnomad2"
    license="GPL"
    depends=('libnjb')
    source=($pkgname-$pkgver.tar.gz)
    #md5sums=('84d738840d7bc56a468f53444a0ec206')
    build() {
    cd $startdir/src/$pkgname-$pkgver
    ./configure --prefix=/usr/bin
    make || return 1
    make DESTDIR=$startdir/pkg install
    Does anybody know what these errors are about? Im not too familiar with the Gnome libraries.. Do I have to install Gnome to be able to make the package?

    you want add this into pacmans path
    Server = ftp://ftp.archlinux.org/tur/hapy
    then
    pacman -S gnomad2
    its so much easier
    but if your current like if you ran pacman -Suy after oct 1 i belive
    then it probably wont work
    mine did till the new upgrades
    ive not been able to build it from source like your doing ive tried many times
    i read some where in the read me files bout jsut adding  modprobe njbfs then mount it like
    a mass storage device im gonna try looking into that today
    i also posted ? to the forum on this

  • Error building schema

    Hi Gurus,
    I am trying to create a simple synchronous BPEL process from which I am invoking a external webservice deployed on a local oc4j container in my laptop.My external webservice operation takes a complex type as input and returns a complex type as output.I have created a partner link for my external webservice and an invoke activity for the calling the partner link.
    When I try to expand the Input/Output variables created for the invoke activity,I get the following error
    Error building schema
    Exception: Connection timed out: connect
    I have the correct proxy settings in my JDeveloper and I am able to access my webservice port from my browser.Please let me know where I am going wrong.
    Thanks In Advance,
    Prasanna

    Hi, just a try:
    "In obsetenv.bat you can specify the proxy to be used for outbound soap/http.
    Make sure it is set if there is a proxy between the bpel server and the webservice you are trying to call."
    In case it works: Thanks to Mark :-)
    Regards,
    Hansi

  • Error building stand alone applicatio​n, with LV.7.01

    Hi to all....
    I always get this pop up error (see picture attached) when trying to build a Stand alone application. I got the full version of Labview 7.01 and the Application builder also. the runtime engine is also 7.01.
    Regards
    HFZ.
    HFZ
    Solved!
    Go to Solution.
    Attachments:
    Error Building App.JPG ‏51 KB

    Hi GardW
    All comm. problem are handeled.
    The problem was based on the destinations for the .VI's.
    Labview 7.1 isn't so got to manage these. It's something the user got to be carefully about.
    Allmost solved. But now can't get the default 'labview Icon' to my finnished Application.  You know... when you make a stand alone application..
    then somewhere under the building process... you can choose if you want your own Icon added as the application starter icon! If you don't  choose any.. Labview makes the Labview Icon as your application starter Icon.
    And that is my problem now. Any ideas???
    Thanks for trying to help , i appriceate it !!
    Regards HFZ
    HFZ

  • Error building executable

    Bonjour à tous,
    Lorsque  je terminais ma semaine hier, j'ai voulu réaliser un dernier test sur un Touch Panel, mais lorsque j'ai voulu construire l'executable sous Labview 2009, celui ci m'a affiché cette erreur :
    Error building executable. Unable to create file
    Quelqu'un saurait d'où vient cette erreur et comment la corriger? Elle est apparue comme ça sans réels changements du code, ce qui d'autant plus étrange!!
    Merci pour vos réponses!

    J'ai ce type d'erreur de temps en temps, pour moi dans 50% des cas, il suffit de quitter LabVIEW, de ré-ouvrir le projet, relancer le build et ça marche.
    Sinon il faut que tu donnes plus de détails...
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

  • Error building content paths on Primaries - java error

    I am on v10.3.3 (Sles Primes) and I am receiving this error in servers-meesages.log:
    [DEBUG] [12/19/11 2:40:46 PM] [] [Content Web Service] [] [getContentInfoEx: Error building content paths for ca4dde135b3d0c4d699a2722d0d49d6
    [DEBUG] [12/19/11 2:40:46 PM] [] [Content Web Service] [] [java.lang.ArrayIndexOutOfBoundsException
    [DEBUG] [12/19/11 2:40:47 PM] [] [Content Web Service] [] [getContentInfoEx: Error building content paths for 56d095d31efaad80f26e51cc02f9294
    [DEBUG] [12/19/11 2:40:47 PM] [] [Content Web Service] [] [java.lang.ArrayIndexOutOfBoundsException
    [DEBUG] [12/19/11 2:40:47 PM] [] [Content Web Service] [] [getContentInfoEx: Error building content paths for 7549fb68f8256e3ffdd1380c5b4ebc6
    [DEBUG] [12/19/11 2:40:47 PM] [] [Content Web Service] [] [java.lang.ArrayIndexOutOfBoundsException
    This is causing the workstations to hang upon registering. Once they reboot and receive their Closest Server rules the situation improves (still slow).
    [DEBUG] [12/19/2011 13:36:45.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [FindNextContent: Sleeping 3000 ms] [] []
    [DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [FindFirstContent()] [] []
    [DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ ] [] []
    [DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ ] [] []
    [DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ Found host lx147.company.net status: Busy] [] []
    [DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ Skipping IP address 10.74.5.147, status Busy] [] []
    [DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ Found host 10.74.5.147 status: Busy] [] []
    Has anyone seen this? Please help.

    pcwoodring,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Error building xombrero 1.6.3-1

    Hi,
    I'm trying to build xombrero 1.6.3.-1 from AUR:
    https://aur.archlinux.org/packages/xombrero/
    I'm getting the following error building the package:
    $ makepkg -s
    ==> Making package: xombrero 1.6.3-1 (Fri Oct 11 09:51:42 CEST 2013)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Found xombrero-1.6.3.tgz
    -> Found LICENSE
    ==> Validating source files with md5sums...
    xombrero-1.6.3.tgz ... Passed
    LICENSE ... Passed
    ==> Extracting sources...
    -> Extracting xombrero-1.6.3.tgz with bsdtar
    ==> Removing existing pkg/ directory...
    ==> Starting build()...
    ~/builds/xombrero/src/build-gtk2/xombrero-1.6.3 ~/builds/xombrero/src
    make: Entering directory `/home/rodrigo/builds/xombrero/src/build-gtk2/xombrero-1.6.3/linux'
    perl ../js-merge-helper.pl ../hinting.js ../input-focus.js \
    ../autoscroll.js > javascript.h
    nroff -c -Tascii -mandoc ../xombrero.1 | \
    perl ../ascii2txt.pl | \
    perl ../txt2tooltip.pl > tooltip.h
    Generating ../about.o.depend
    In file included from ../about.c:23:0:
    ../xombrero.h:296:25: error: missing binary operator before token "("
    #if WEBKIT_CHECK_VERSION(1, 5, 0)
    ^
    ../about.c:1983:23: error: missing binary operator before token "("
    #if GLIB_CHECK_VERSION(2, 32, 0)
    ^
    cc -D_FORTIFY_SOURCE=2 -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -I/usr/include/gtk-2.0 -O2 -Wall -ggdb3 -D_GNU_SOURCE -I. -I.. -o ../about.o -c ../about.c
    In file included from /usr/include/gtk-2.0/gdk/gdk.h:32:0,
    from /usr/include/gtk-2.0/gtk/gtk.h:32,
    from ../xombrero.h:94,
    from ../about.c:23:
    /usr/include/gtk-2.0/gdk/gdkapplaunchcontext.h:30:21: fatal error: gio/gio.h: No such file or directory
    #include <gio/gio.h>
    ^
    compilation terminated.
    make: *** [../about.o] Error 1
    make: Leaving directory `/home/rodrigo/builds/xombrero/src/build-gtk2/xombrero-1.6.3/linux'
    ==> ERROR: A failure occurred in build().
    Aborting...
    I don't know what I'm missing. I was able to build xombrero last week in another PC with arch. My current system is upgraded:
    Linux 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:40:32 CEST 2013 i686 GNU/Linux
    I though that installing thg gnutls library would solve the problem, but unfortunately the error persists after gnutls installation
    $ pacman -Ss gnutls
    extra/gnutls 3.2.4-1 [Installiert]
    A library which provides a secure layer over a reliable transport layer
    extra/libtasn1 3.3-1 [Installiert]
    The ASN.1 library used in GNUTLS
    community/python2-gnutls 1.2.4-2
    Python wrapper for the GNUTLS library
    Thanks in advance
    Last edited by cortezthekiller (2013-10-11 08:35:05)

    I've edit the former post to write the error messages in English.
    Yes, glib2 is installed, as well as the dependencies mentioned in the aur:
        desktop-file-utils
        libbsd
        webkitgtk3
    It seems that the updated PKGBUILD in the comments is just aimed to create two sepparate packages for xombrero & xombrero3. I'll try it, but I don't think this will fix my problem. As a said, I was able to build xombrero in another Pc a few days ago.

  • "error building executble. unable to create file."

    Hello!
    When I try to run or Build an Pocket PC application i get thes message: "error building executble. unable to create file."
    I have installed:
    LAbview 8
    Microsoft embedded visual c++ 4.0
    Microsoft Pocket PC SDK
    PDA Module 8
    Does anyone have a clue wats wrong?

    The builder is missing the C compiler and the linker from Microsoft for the emulator target.
    On my system they are located in C:\Program Files\Microsoft eMbedded C++ 4.0\EVC\wce420\bin. Check on your computer.
    I couldn't find a place where to set this path (remember: I have 7.1, 8.0 may support this settings, although it's not likely).
    Paolo
    Paolo
    LV 7.0, 7.1, 8.0.1, 2011

  • Error building PKG grub-reiser4

    helo,
       I have this error building makepkg in grub-reiser4 aur package
    makepkg
    ./PKGBUILD: line 12: syntax error near unexpected token `)'
    ./PKGBUILD: line 12: `           '4876f193005df5fca8ca9647729d1e23')'
    ==> Making package: grub 0.97-2 (Sun Dec 10 08:48:50 CET 2006)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    ==>     Using local copy of grub-0.97-reiser4-20050808.tar.gz
    ==>     Found menu.lst in build dir
    ==>     Found install-grub in build dir
    ==> WARNING: MD5sums are missing or incomplete.  Cannot verify source integrity.
    ==> Extracting Sources...
    ==>     tar --use-compress-program=gzip -xf grub-0.97-reiser4-20050808.tar.gz
    ==> Starting build()...
    /usr/bin/makepkg: line 637: build: command not found
    ==> ERROR: Build Failed.  Aborting...
    what is ?
    thankyou

    thankyou and sorry for my error
    but when installed I run:
    grub-install /dev/hda
        GNU GRUB  version 0.97  (640K lower / 3072K upper memory)
    [ Minimal BASH-like line editing is supported.  For the first word, TAB
       lists possible command completions.  Anywhere else TAB lists the possible
       completions of a device/filename. ]
    grub> root (hd1,4)
    Filesystem type is reiserfs, partition type 0x83
    grub> setup  --stage2=/boot/grub/stage2 --prefix=/boot/grub (hd0)
    Checking if "/boot/grub/stage1" exists... yes
    Checking if "/boot/grub/stage2" exists... yes
    Checking if "/boot/grub/reiserfs_stage1_5" exists... yes
    Running "embed /boot/grub/reiserfs_stage1_5 (hd0)"...  18 sectors are embedded.
    succeeded
    Running "install --stage2=/boot/grub/stage2 /boot/grub/stage1 d (hd0) (hd0)1+18 p (hd1,4)/boot/grub/stage /boot/grub/menu.lst"... failed
    Error 15: File not found
    grub> quit
    this I view in my /boot/grub
    default        iso9660_stage1_5  minix_stage1_5     stage2_eltorito
    device.map     jfs_stage1_5      reiser4_stage1_5   ufs2_stage1_5
    e2fs_stage1_5  menu.lst          reiserfs_stage1_5  vstafs_stage1_5
    fat_stage1_5   menu.lst.old      stage1             xfs_stage1_5
    ffs_stage1_5   menu.lst.pacnew   stage2

  • Error building DC - Updated

    Error building a DC.
    I have a DC named "ext_xl" which is of type "External Library".
    I copied 3 Jar files:- Jexcel-install.jar, Jexcel.jar, jxl.jar into the library folder of this DC. Further I created two Public parts one for API and the other for SDA named:
    1. XL_API_PP
    2. XL_SDA_PP
    I built this DC "ext_xl".
    I have a report DC (cdts_ab) and a selection screen DC (sel_ab). The selection component in the Selectionscreen DC is used in the report DC via Used DC.
    When I add the above mentioned PP "XL_API_PP" to the Used DC part of "cdts_ab" and try to buid it, it gives me following error log:
    26-Aug-2006 10:37:46 /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: cdts_ab: Build failed for com.rel/cdts_ab(MyComponents) in variant "default": [Error]   Generation failed!
    Build log -
    Development Component Build (2006-08-26 10:37:39)
      Component name: cdts_ab
      Component vendor: com.rel
      SC compartment: MyComponents
      Configuration: LocalDevelopment
      Location: local
      Source code location: Administrator@infpw01589
      DC root folder: C:\Documents and Settings\Administrator\.dtc\LocalDevelopment\DCs\com.rel\cdts_ab\_comp\
      DC type: Web Dynpro
      Host: infpw01589
    DC Model check:
              [dcmake] All used DCs are available locally
              [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/cmi"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/ddicruntime"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/metamodel/content"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wd/webdynpro"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/logging"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wdp/metamodel/content"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.util.misc"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.exception"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.mw.jco"
              [dcmake] validating dependency to  public part "SelectOptionComp_PP" of DC "com.rel/sel_ab"
              [dcmake] validating dependency to  public part "SelectOptionTypes_PP" of DC "com.rel/sel_ab"
              [dcmake] validating dependency to  public part "XL_API_PP" of DC "com.ash/ext_xl"
              [dcmake] DC model check OK
    Start build plugin:
              [dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
              [dcmake] starting build plugin from : C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.ap\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\
    [wdgen] [Info]    Generating configuration/Components/com.rel.cmet.components.contdailytscomp.ContDailyReptComp/ContDailyReptComp.xml
    [System.err] [Invoked from  com.sap.ide.generationfwk.task.GenerationTaskJavaMethod.executePersistent(GenerationTaskJavaMethod.java:153)]
    [System.err] com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to parse XML document containing MRO=com.rel.cmet.components.seloptcomp.SelectOptionsComp.
    [System.err]      at com.sap.tc.webdynpro.repository.xml.XMLLayerDataParserWriter.startParsing(XMLLayerDataParserWriter.java:190)
    [System.err]      at com.sap.tc.webdynpro.repository.xml.XMLPersistence.readRepositoryObject(XMLPersistence.java:331)
    (ProgmodelRepositoryGenerator.java:297)
         [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
         [wdgen] ERROR: Generation failed due to errors (4 seconds)
    Ant runtime 6.266 seconds
    Ant build finished with ERRORS
    [Error]   Generation failed!
    Error: Build stopped due to an error: [Error]   Generation failed!
    Build plugin finished at 2006-08-26 10:37:46 GMT
    Total build plugin runtime: 6.781 seconds
    Build finished with ERROR
    Message was edited by: Ashwin Bhat

    Could not find a solution. Built new dc.

  • Error build-impl.xml:577:

    i using netbeans 6.8 and while running my program an error "build-impl.xml:577: The module has not been deployed" occured . my web.xml file is shown below
    <?xml version="1.0" encoding="UTF-8"?>
    <web-app version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
        <context-param>
            <param-name>no</param-name>
            <param-value>100203231982381</param-value>
        </context-param>
        <servlet>
            <servlet-name>servlet1</servlet-name>
            <servlet-class>servlet1</servlet-class>
        </servlet>
        <servlet>
            <servlet-name>listener</servlet-name>
            <servlet-class>listener</servlet-class>
        </servlet>
        <servlet-mapping>
            <servlet-name>servlet1</servlet-name>
            <url-pattern>/s1</url-pattern>
        </servlet-mapping>
        <servlet-mapping>
            <servlet-name>listener</servlet-name>
            <url-pattern>/l1</url-pattern>
        </servlet-mapping>
        <listener>
            <listener-class>listener</listener-class>
        </listener>    
        <session-config>
            <session-timeout>
                30
            </session-timeout>
        </session-config>
    </web-app>i m trying to use context parameter in my servlets there are two servlets one is listener.java which implements ServletContextListener another is servlet1.java i dont undertand the error everything is fine in both the files plz help me

    The <servlet-class> tag should contain the fully qualified name of the Servlet eg "com.something.Servlet1"
    If they are in the default package you may want to move them to avoid any unexpected behaviour - link explains:
    http://faq.javaranch.com/java/PackageYourBeans
    m

  • Solaris adapter: Error building user.

    Hello!
    We are using our IDM to manage users in Solaris Zones. This worked fine, but after moving some zones to a new system, the IDM says it does not find the users any more. When I do a "Accounts / Load from resource", I get the following error for many users:
    Error extracting account 'nobody': com.waveset.adapter.exception.ContinuableIteratorException: Error building user.Does anyone know how to fix this error?
    TIA
    Stephan

    Problem solved: I forgot to change the profile for the user which changes accounts on the system. After editing /etc/user_attr all works fine now.

Maybe you are looking for

  • Wait (ms) - NI KnowledgeBase article example

    I am reading http://digital.ni.com/public.nsf/allkb/12B2EA9AD5B265AD86256257004DD8E2 which is suppose to explain the difference between the Wait (ms) function and the Wait Until Next ms function. I am having a hard time understanding the example give

  • Problem executing RMI tutorial "Getting Started Using RMI"

    I am trying to execute the RMI tutorial located at http://java.sun.com/j2se/1.3/docs/guide/rmi/getstart.doc.html I use JDK 1.3.1, and Windows XP Pro. I follow the info on the URL http://java.sun.com/j2se/1.3/docs/guide/rmi/getstart.doc.html And all i

  • To run a command using java code

    hi all, There is a command "java -jar selenium-server.jar -interactive" which i am running through command prompt after going to D:\MyFolder\Examples . i want to execute this command using java code .please help

  • Compile Sun C programs on Windows

    Is there a way to compile sun programs on windows? I looked around but have not found anything. At times I am unable to connect to my Sun server and would like to compile from home. Linux is not always a reliable option because there are differences

  • Updates installation stuck on 0%

    Hi, I have problem with patching few servers in DMZ. I have deployed SUG and at beginning of update process, it looks fine - all necessary updates are visible in Software Center. But... next all updates stuck on 0% and stay in that state few hours. A